my macbook pro is stuck on the kernel panic message, and i tried to restart a lot of times but it doesn't work my mac doesn't start?
Info:
MacBook Pro (13-inch Early 2011)
diagnose this kernel panic. I recently installed a SSD and 16gb of RAM both from Crucial, and was wondering whether that is potentially the problem. This is on an early 2011 Macbook Pro.Â
Anonymous UUID:Â Â Â Â Â Â F50EBC9D-D65E-62EA-9F52-E10973A07940Â Â
Mon Dec 1 14:38:44 2014 Â
*** Panic Report ***
[Code]....
Info:
MacBook Pro (13-inch Early 2011), OS X Yosemite (10.10.1)
I was trying to help my husband with his phone. I followed the phone's manufacturer's suggestions and it told me load software for managing it. When I went to install it the computer told me it had 59 things to install. It was late, I was tired and shouldn't have been doing this at this time. I did, when it was done installing we had a kernel panic. I am in a different country, in a village. No MacStore! I am frightened and worried. I am computer literate for a person my age, but still. If it is to be resolved I will have to do it and I wish the kids were here with their friends. I am hoping someone will be able to talk me out of this predicament.
I have tried to press the shift key for safe mode. No result. I have tried another one that has me pressing some buttons while loading and text comes up and I am supposed to type in FSCK -fy However this could not be done as the cursor was there, but no text was appearing. I think that is all I have tried. I do have my MacBook here and it is slightly older than his. I may have a firewire that may work to run his off of mine. I don't know. Can't you come in like Verizon did years ago and fix it right in front of me over the internet?
My mac air usually appear kernel panic. what the happen with my mac?
Info:
MacBook Air, Mac OS X (10.7.4)
I switched out my HDD for an SSD and switched out my superdrive for the HDD. It was working fine for the past 6 months or so.Â
So, yesterday I plugged in my Macbook and started it up from hibernation. I then proceeded to launch chrome and as it tried to restore my last session (with like 5 or 6 YouTube tabs), it crashed. I tried closing it and re-opening it, but no cigar. I then thought to just open safari, but a no network detected warning came up. When trying to resolve that, an "unapproved caller" error came up.Â
I then tried to restore my computer from a TM backup, but was unable to due to it being unable to unmount the drive, then I tried just erasing the drive, nope.Â
I then decided to take the dang SSD out of the internal SATA connector and plugged it in through an external enclosure, that worked and I was able to restore my TM backup that way.Â
So bottom line, I can boot up from USB fine, but when I plug it into the internal SATA connector my MBP gets stuck at the apple logo. I've tried booting into safe mode, resetting the NVRAM and PVRAM. No luck. From what I've seen, it seems that I may have a bad SATA connector that needs to be replaced?Â
I tried to press shift, cmd and v during startup which notified that the os x version cannot be identified!
Info:
MacBook Air
Off-late almost everytime I am getting kernal panics when I shut down my iMac 21 2011 model. After booting back here is the problem report that comes up. I could'nt make head or tail of it, could anybody help me out here. Â
Interval Since Last Panic Report: 591345 sec
Panics Since Last Report: 9
Anonymous UUID: 3C133529-E586-47C7-8799-ACB548B7537AÂ Â
Sat Feb 11 11:11:39 2012
panic(cpu 1 caller 0xffffff80002c266d): Kernel trap at 0xffffff7f820f0ff8, type 14=page fault, registers:
[code]...
Info:
iMac, Mac OS X (10.7.1)
I tried to play world of warcraft so after going through all possible trouble shooting steps such as disc repair, reset pram and everything else I did an archive and reinstalled my OS. At first this seemed to work but then I could not even open safari with out the computer locking up So I erased everything and did a fresh install, the installation had no problems I did a disk check and everything before installing everything was good.Then I get to the welcome animation screen and on the first word the computer locked up at the graphics and the only way to get it off was to hold the power button and restart. Now I am stuck in a kernel panic and can not do anything. The only thing it will allow me to do is get into single user mode, I can not even boot to the CD or disk utility it just keeps giving me the kernel panic when i try and hold shift, c, or d while booting up.
View 1 Replies View RelatedHow to do a safe reboot on my MacBook Pro when kernel panic message appears?
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3)
My mac is 2.7ghz i5 with a 1TB HD. It has crashed about five times this week. Two kernel panics, two freezes where I can't move anything, and once it just plain shut off. I've heard that it could be the network card causing the kernel panics. I do know that the airport card has been performing very poorly but I assumed it was just because there are about three walls between my computer and the router.
Interval Since Last Panic Report:Â 1012639 sec
Panics Since Last Report:Â Â Â Â Â Â Â Â Â 1
Anonymous UUID:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â F9F8A660-5B62-428C-8ECE-895C14C009DEÂ
Wed Feb 1 19:38:44 2012
[code]....
Info:
iMac, iOS 5.0.1
Well I had a kernel panic yesterday and now im stuck at start up becuase everytime I reboot the computer it takes me to the kernel panic and I tried to boot in single user mode and tried to do fsck repair but when I booted in single user mode it just stoped loading at system uptime in nano seconds: 753286880 and then I tried to boot in safe mode but had no luck it didnt even go in safe mode it just went straight to the kernel panic I also already zaped the pram but still no luck and I dont have the mac OS X install disks.
View 1 Replies View RelatedMy Mac Mini froze while using Safari and watching a youtube video, so I restarted the machine by holding down the power button, then on startup I reloaded Safari, and it completely froze again. This time around, I got a kernel panic on boot. I tried booting into single user mode by holding down the shift key, but that still gave me a kernel panic. So I tried using the Lion Internet Recovery mode by holding down command-option-R when booting. The OS showed the Internet Recovery progress bar, but when it completed and the machine rebooted, I got a kernel panic again.Â
Is there anything else I can try to recover this machine, or do I need to take it into an Apple store to have them fix it? It's a mid-2011 model, so I don't have a DVD drive in it, so I can't use a boot disc, although I guess I could use a bootable USB, but I don't have another machine to create one with.Â
I figure if it kernel panics from an Internet Recovery, then that takes my hard drive and anything that was installed on it out of the equation. I've also disconnected all external devices, drives, etc, and only have a monitor and keyboard/mouse attached to it, so that rules out any other devices that might be causing problems.Â
Info:
Macbook Pro 2Ghz, iBook G4 800mhz
I turned up one day to teach using the Mac Pro and the message on the screen said I had to restart my computer. After many times I gave up. I wrongly thought the hard disk failed as one of the pupils saw some water underneath the Mac from the leaking roof. I checked and formatted the hard drive inside a pc and put Windows on it. After inserting the hard drive and the OSX into the dvd drive proceeded to re-install the software, only to find exactly the same problem as before. What to check next before trying to find someone to fix it.
View 4 Replies View RelatedMy imac has started to have a kernel panic all the time lately. It is where the whole screen will go darker and then a box in all different languages comes up saying I need to restart the computer. I have a couple of questions in relation to this, first if I reinstall and then back up from timemachine will I have the same issue again? If I do a fresh install and reimport all my music and vids manually will that be a better way to do things?
View 3 Replies View RelatedWhat can I do when my computer doesn't boot and it appears a message "panic kernel"?
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7)
I had a kernel panic few days ago, and there's no audio on youtube, itunes after the attack......
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3)
I bought an used macbook pro early 2011 (i5 2.3) and its not charging. With the battery in it the green light doesnt turn on (doesnt charge at all). If I open the macbook and remove the battery the green light turns on and I can turn on the macbook.I have already bought a new battery and its not charging.Could it be the magsafe board? I am asking because the light goes on without battery so I thought that the magsafe board maybe is working.
View 6 Replies View RelatedI have an early 2011 MBP with 4GB RAM installed and i want to upgrade to 8GB but before i do so i have some questions to make. The MBP has 2 RAM slots so my first question is whether the 4GB is 2x2GB or 1x4GB. Will I see any difference in my MBP performance if i do decide to upgrade?the model of the RAM which is compatible with my model.
Info:
MacBook Pro, Mac OS X (10.7.2), Early 2011
I've been experiencing problems with my 2011 MacBook Pro 15 model with it freezing on me all the time.I have read around and came to a conclusion that it is a logic board problem on the logic board that supports 3 GBs on the superdrive bay.Have any of you had this problem? What did you do to get the problem resolved? I'm going to my local Apple store to try to get this fixed (With the current logic board that supports 6 GBs on the superdrive bay) or get a replacement laptop.
Info:
MacBook Pro, Mac OS X (10.7.3)
My macbook pro early 2011 doesn't start. On start it stay only on grey screen for hours
Info:
Mac Pro, Mac OS X (10.6.8)
my early 2011 macbook pro graphics *****. Battlefield 3 lags on low. Exporting videos is slow aswell. Is there anyway to make it work better? For a laptop that I paid 2000 dollars for it should work a lot better than it is.
Info:
MacBook Pro, Windows7
I am looking to either increase ram or better still if I can afford it, put in a faster processor, my laptop is quite slow....and with more than two programs open, it can sometimes grind to a halt..
Info:
MacBook Pro, Mac OS X (10.7.2)
For the past few days (never happened before) my apps started crashing continuously and kernel panic screen started appearing very frequently. I am still wondering what may be the cause of it, then I tested my RAM with Rember, and this log showed up:
Memtest version 4.22 (64-bit)
Copyright (C) 2004 Charles Cazabon
Copyright (C) 2004-2008 Tony Scaminaci (Macintosh port)
Licensed under the GNU General Public License version 2 only
I did a quick search through the forum and didn't see anything specific about this problem. It just started to occur yesterday and nothing has changed on the computer. (Nothing new installed and no external hardware plugged in.)
Basically, it just pops up with the grey screen advising to restart. Sometimes it occurs after waking from sleep, sometimes it occurs after starting up, and sometimes it occurs in the middle of a task. I haven't noticed a specific pattern.
I ran the AHT and everything passed. I also ran Rember and the memory seemed fine in the test. I reset the PRAM and VRAM and the SMC after speaking with Apple. Finally, I reinstalled the OSX clean on the machine and the panics are still occurring.
This is the last panic report from the Macbook 1,1 2.0 with 1.25 GB RAM. I'm hoping it is the RAM and not something with the logic board, but am not sure if that can be ascertained without finding replacement RAM first.
My computer had problems with display, track pad, not powering up, and lots of parts were replaced in January (MacBook Pro purchased 12.31.09). Got it home, after a while constant kernal panics. tried everything, brought it into Apple store yesterday, ran diagnostics, hard disk repaired, seemed OK.Â
Shortly after I came home it happened again. I repaired permissions, did verify disk, no problems with disk. Updated software, including went to Java and Adobe and updated them. Nothing works. Now the permissions note lots of problems with Remote Management (one of the updates from yesterday, 5.21) and Java (yesterday too). MacBook Pro OS X 10.6.8, would like to go to Lion but don't want to until my machine is stable?
Info:
MacBook Pro (13-inch Mid 2009), Mac OS X (10.6.8)
First off I want to say I've been looking for answers for this on google for a few days, and I've found similar problems but none of the fixes have seemed to help me. Then again I may be doing something wrong. I've recently purchased a 500GB Momentus XT to replace the stock hdd in my early 2011 mbp 13".Originally placed the disk in an external usb 2.0 enclosure and made a clone of my the stock disk. I could boot fine from the momentus xt when being run from the enclosure.
Problems arose as soon as I tried to swap the drives around. Now I could boot fine from the stock drive (in the enclosure) but the momentus XT could not be booted from. I tried swapping the momentus back to the enclosure, and it still worked fine this way. I attempted to reset PRAM and Smc, and it didn't help me.
So I tried to reformat the drive, and to make a partition of 495.11g with the rest being empty space (I read this may help). I then put the momentus into the internal bay, in hope of booting osx from the original disk over usb, and migrating the data I needed over. Disk utility could not recognise there was even a disk in the internal bay (the momentus), just as before.I tried updating to lion (I was on snow leopard before) and turning it on again, but still disk utility couldn't even recognise the presence of the momentus xt when used in the internal bay.
I have noticed that I am having trouble updating the EFI firmware to version 2.7. Every time I try, it runs through the installation, restarts, says install was complete. But when I go to system update, it still lists this as an update, and system profiler still says I'm on the older version. Yes, I have tried updating it using the package from the apple website, it is no different.
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7.3)
I have the Early 2011 Macbook Pro 13" with an Intel i5 Processor. Some of my friends told me that only the Intel i7 Processor Macbook Pros have the new Sandy Bridge processor. Are they correct because the base model is the only Macbook Pro in the line to have an i5 Processor.
Info:
MacBook Pro, Mac OS X (10.7.3)
I currently have a 13 inch MBP early 2011 notebook that has a fan running constantly. The fans are not making horrendous noises indicating that the fan is broken or that a foreign object is bouncing around in my computer, but more so you can just hear the fans operating especially in a quiet room. The sound is very soft but in a dead silent room you can hear it working, you can even make out the sound even while typing. I am pretty sure my computer isn't broken, nor have I downloaded anything I am not supposed to that would allow my fans to make the noise. I bought this computer on the 26th of December and all I am using it for is simply MS word and logic pro 9. I uninstalled logic pro 9 a month ago due to my family buying an iMac and even then I can still hear the fan moving. I am curious as to what you all think, I may just bring it into the Apple store because it's quite frustrating having to write a paper and all you can hear is the sound of the fan working. My fans are running at 2000rpm and my research tells me that that number is normal.
Info:
MacBook Pro, Mac OS X (10.7.3)
can i fit 2 x 8g memory into my 17" early 2011 macbook pro and will it give me any advanagtes ?
Info:
MacBook Pro (17-inch Early 2011), Mac OS X (10.7.3)
MB Pro: 8,1 early 2011 - (13') 4G ram: the MB Pro errors when I attempt to install two 4G SO-DIMM modules (description below). I have actually attempted "two new" (OWC) Other World Computing sets of (2x4G), after it was believed one of the first modules arrived bad. The result remains; only one 4G modules works, in the lower slot. The upper/top slot does not accept a 4G module. I have tried two sets with all the possible combinations using an existing 2G and a new 4G. With this present setup all I get is 6G of ram. In addition, I used eraser on the ram, no go. I followed desktop procedure, unplugged battery etc., etc..
Info:
MacBook Pro, Mac OS X (10.7.1), Triple boot: WIN7 & BT5
