Intel Mac :: Completely Stuck After Replacing Hard Drive
Jun 23, 2012
I have an old (late 2006) 20" iMac. Problems started a few weeks ago - first the computer would freeze and crash. Eventually I started getting either a circle/slash sybol or the question mark folder every time I tried to reboot. Eventually I concluded that the hard drive had gone bad. So I bought a new 1TB Barracude from OWC and installed it following instruction found on [url]....
Now I can't do anything. I tried booting from a OSX 10.6 install disk, but the machine simply spits it out after about 30 seconds and gives me the "?" folder. So I got my hands on 10.4.5 Universal Install disk and tried that, thinking that maybe the older machine needed an older version to start from (sounds logical at least). Nothing. It doesn't spit that one out, but still ends up with the flashing "?" folder after a minute or two. I've tried holding down C on startup. Same result. I've also tried holding option to get the startup manager, but that doesn't work either. I just end up back at "?". I really hate "?"
What is the easiest way to replace the internal hard drive on a 2009 iMac? I've got 320 gb of space and only a few gb left.I'd like to upgrade to 500 gb or more.I don't want to take the computer apart myself, I don't think.
My brother's MacBook's hard drive just died. He has a backup of all of his data. If I were to buy this, what do I do after installing the hard drive? We have the Leopard disks and everything.
I am wanting to replace the hard drive in my macbook but I don't have the os disks that came with the computer (I've recently moved and they're beyond lost). I've read where apple can send me replacements (I assume I'd have to pay for them). Can I get the leopard upgrade and use that, or it just that, an upgrade and I need osx already on the computer. I don't care about backing up anything, as theres nothing on it of any importance, all my music and photos are on an external hard drive.
I just need help trying to take out this darn hard drive. It won't come out. There are two hard drives in my G5 right now, I'm trying to pull both of them out. I tried to do the bottom one first, didn't work. Tried the top one, didn't work. I'm stumped, and I tried my hardest to take them out. I followed these instructions: http://www.info.apple.com/usen/cip/pdf/g5/073-0851.pdf
I am going to be replacing the hard drive on a macbook pro that went crackle and fgave me the spinnign wheel of death before it totally went dead on me but i dont have the discs to reinstall the OS (and to be honest I forget what version it is) on this laptop but have the discs for my imac. Can I use these discs or do I need something else? I got this from a former roommate who upgraded to a newer macbook and was going to toss this so there are no discs for this macbook. Totally at a loss here....not sure if the data is recoverable from the hard drive so need to know what my options are before I take it in for repair tomorrow....
I just replaced the hard drive in my macbook pro 2011 with an agility 4 ssd. I was able to copy all of the information over to the new drive. However ever time I wake the system up from sleep it freezes. I get the pinwheel. I am forced to restart the computer to get it working.
I do a lot of traveling and have a lot of video files that I like to take on the road with me. I saw a 500gb Western Digital 2.5 hard drive on Amazon.com and want to replace my 160gb hard drive with it. I have an external hard drive with time machine. Is there anyway to do this so that I do no have to re-install everything?
The hard drive in my MacBook is turning 3 years old, and weird noises are being emitted from it, which means, the hard drive is on it's last legs. The stock Apple hard drive was an 80GB. Specs of the MacBook are in the sig. I was thinking to myself, why not take this as an opportunity to get a much larger hard drive for not that much money. So I came across this: http://www.bestbuy.com/site/olspage....=1218030894682 Question is, would it fit the MacBook White from 2007, and how does it perform?
I'm thinking of getting a refurb MBP but they come with a 5400rpm hard drive and I want a 7200rpm. Does anyone about how easy it is to replace the internal hard drive in a MBP and how much it would cost?
I have a problem which I couldn't solve for quite a while now. I bought a new WD Scorpio Blue 500 GB for my uMBP 13. I can't, however, figure out which screwdriver I need for those mounting screws that have to be removed in order to change the drives. I first bought a Torx 6 (Black & Decker TX 6) which is too big. I then ordered both a Torx 4 and Torx 5 from eBay. They are both too small... So what is wrong here? anyone had the same problem? Or any alternative solutions w/o using a Torx driver?
I recently thought it would be a smart idea to volunteer to replace the failing HDD on my friend's Macbook (white, late '07 model), since she could get a higher capacity than 120GB this way, as opposed to getting a replacement at the Genius Bar. I went on ifixit.com, since I was able to change a couple of components on my 1st generation Macbook Pro without much trouble, and followed the guide step by step. Now, I am no rookie with this stuff. I even used to work at an Apple store, but as a specialist, not a genius. However, when I did everything (and it would seem that the installation itself was done properly), the computer screen would remain off once I booted the computer.
I tried changing it back to its original drive to see if I could at least get it to boot, but the same thing happened. Nothing on the display. I tried starting up while pressing C to run from the Snow Leopard disc, I tried starting up while pressing Option, I tried everything I can think of. I am running out of options and I have no clue what to do. Is there something I should have done before putting in the drive? Does anyone know what could be done, aside from taking it to the store and paying the $200 for an HDD replacement? (my former co-workers at the GB seem to be MIA for this).
So I've come to the realization that I need a bigger HD in my MB. I'm a little confused on how to go about doing it though. If I use Super duper and put a backup of my existing HD onto an external HD. How do I restore it after the new HD and clean install of SL is done? Do I just download the super duper app again and use it to restore from the external HD?
I need to replace the hard drive to my iMac 1.8 GHz, PPC G5. Would an external drive be too slow to run the OS? If I do replace the internal drive with another internal model, proper dimensions/specs for this model iMac? I've been given various, conflicting information. Do I need to use a 1.5 GB/S drive or can I get a faster drive? It is hard to find a 1.5 GB/S drive.
I have removed the 2.5" Hard Drive from my better half's 2006 Macbook and looking at the Seagate I got to replace it the power pins don't appear to line up. Â
I can't see deep into where it seats. Do you have to replace the HDD with specific makes of 2.5" HDD?
I just recently got a Power Mac G5 (June 2004 model) from a family member, but I want to replace the hard drive with a new one. I understand I can use just about any SATA drive I'm looking to replace the old one with about 1TB of space, but how to I initialize it once I physically install it, and will I lose the basic programs, such as safari, iLife, iPhoto, etc? I know I'll lose the loaded data such as pics and music. I'm still a bit of a novice when it comes to the macs.
I was going to get a 500GB hard drive to replace my 160GB hard drive in my white macbook. I was wondering where's the best place to backup the data online before changing it out? Carbonite?
hi there, I have iLife '06 that came on my macbook when i bought it mid 2007, but now, as you might have read in another post, I dropped my macbook and i might need to replace the hard drive. So if that is the option I have to take, how do I get iLife back once I have reinstalled the OS? Surely I don't have to purchase it?
I swapped my hard disk on the above mentioned machine and it won't boot. When I turn the machine on it tells me that there is no bootable disk. I have previously booted from the disk via usb, so i know there is a bootable partition on it. I swapped back the original drive and it boots up fine. Why wont the external drive boot when run internally?
I own a 1st generation MacBook Core Duo (black) with 80GB Fujitsu at 1.5 Gigabit/s. I want to replace this with a compatible hard drive. Will this - Western Digital Scorpio Blue WD3200BEVT 320GB 5400 RPM 2.5" SATA 3.0Gb/s Internal Notebook Hard Drive - work in my laptop? I notice that it has a 3.0Gb/s speed versus my current Fujitsu 1.5Gb/s. I'm using Tiger, if this matters.
After seeing the system requirements for Windows 7, I decided to upgrade to a larger hard drive later this week. I plan on giving my old 160 gig drive to a friend who uses Windows but I want to wipe it clean first. Do I insert my Leopard disc and use disk utility to reformat?
My hard drive was going out on my older G4 Imac so I took it out and replaced with a new drive. Prior to removing the older defective drive I backed everything up on an external drive.
*I assumed I could just format the new drive and then reinstall the original OSX disks and then drag over the backup files and live happily ever after!
Problem #1: mac starts up but flashes a question mark. I insert the backup/restore disks that came with the computer (6 gray discs). This is not correct I see.
Problem #2: I am not 100% the drive I have is the right one (see below for all details). I may need a different connector? I ran the diagnostic cd that came with it and the new hard drive shows up and it says it's OK. NO other problems on the test.
Problem #3: I think the drive will/can only access 128GB of the new 200GB hard drive? if so, does this mean it will not work without an card or it will just not see/read the other storage?
Problem #4: Are the restore disks NOT the OS to reinstall? or was this on the internal hard drive already from the factory pre-loaded?
Someone said I would have to have someone make me a bootable OSX install and connect via external drive to start and then format the new drive and then re-install the OS somehow. I have been racking my brain trying all options and researching online all weekend!!
*Please let me know what the options are to fix this situation.
details:
G4 iMac Power PC M8535LL/A 800 Mhz. 512 MB.SD Ram OSX 10.4.11
The HDD in my wife's black MacBook (2007, I think) won't boot up. I've run Disk Utility and have decided it's pretty much dead. I have a Carbon Copy backup, so the data is fine. I've tried replacing the drive twice now, and the MacBook simply won't "see" the new drives. When I install the drive, nothing shows up in Disk Utility (run either from the install disc or the Carbon Copy backup drive in a USB enclosure).
The new drives are formatted (I even copied the bootable backup to one of them), and the computer sees them just fine if I install them in a USB enclosure and hook them up that way. When I put them in the computer, though, no dice. Her old, corrupted HDD still showed up in Disk Utility when I reinstalled it, but the new drives don't.
I have a 2005 G5 and my Bottom bay HD wires are busted. I need to obviously buy new ones but the problem is I can't figure out where the wires go, I can find the smaller wire, but not the bigger power wire (i think its the power). When I open up the G5 it looks like the big wire goes behind the board (and I really dont want to take the whole thing apart!). Does anyone have a picture explaining where all the wires go in a 2005 G5. I have goggled it, but just internal pics and simple explanations come up, I am looking for something more complicated so I know where the bottom bay wires go to.If anyone has switched out the wires before please let me know, cause this is nuts. They make everything else in the G5 easy to do but this. ( This all happened because I shipped it and the wires snapped on my bottom drive)
