OS X :: Boot Camp Screwed Up Start Up Sequence?
Apr 4, 2009
I tried installing Windows XP on to my MacBook running Leopard last November using an XP installment disk that came with a Dell Desktop. So that worked out well, until Boot Camp told me to print out an instruction sheet. Well, I don't have a printer connected to my MacBook, so I continued the installation without it.
The installation apparently 'finished' so I clicked "finish" but the whole installation process went back to the beginning, so I had to force quit the installation (my MacBook was running from just the disk, not 'Macintosh HD'). By the way, I went through the installation process a couple of times before I thought "this is just keep on repeating."
Well, whenever I go to boot up my MacBook now, a message comes up in a black background with white writing saying "No bootable disk, press any key to continue." Pressing any key doesn't work, so I have to hold down the power button (which I hate doing since it's apparently bad for the HDD) to turn it off, and I now have to hold down the alt/option key whenever I start up my Mac. By the way, the only disk that comes up is 'Macintosh HD', not the 'Windows HD' I partitioned earlier, which I have now deleted. My question is, what else can I do to completely erase this message I get at the start up?
View 5 Replies
ADVERTISEMENT
Nov 13, 2007
I am soft of new to Mac OS X Leopard (Got it about two or three weeks ago). I was just wondering how to use Boot Camp. I know it runs windows programs on your computer but do you have to install anything (i.e. Windows XP)? If you guys could help me out that would be really cool.
View 1 Replies
View Related
Sep 17, 2010
I'm running the latest high end 21.5" iMac and I've had Windows 7 64 bit working through boot camp and VMWare Fusion since I got the computer. Everything's been fine, but now all of a sudden, windows won't start through boot camp. When I start up the computer, I select boot camp and it freezes. Still works through VMWare.
View 7 Replies
View Related
Jan 20, 2009
I'm running the latest update of Leopard and Windows XP SP2 in a 20 GB FAT32 partition, on a 24" iMac Al (Fall 2007). I've been out of the country for the last 5 months, but when I left my computer, safe and sound at home, XP booted fine with Boot Camp. I had the latest Mac OS software as of August 2008.
Now, I've returned and the first thing I did was Software update and refresh my system. I've tried to boot in Windows, and I got a black screen with a blinking white underscore on the top left corner - the operating system doesn't load.
Does anyone know of any software updates that could have affected my Windows installation? I somehow doubt that, without use, the Windows installation managed to screw itself up, but I suppose it is Windows, isn't it?
View 1 Replies
View Related
Jan 12, 2009
Just installed Windows 7 via Boot Camp, how do I default OS X to load instead of Windows 7?
View 2 Replies
View Related
Jul 28, 2009
I installed Boot Camp on my machine and removed it thereafter. However it has slowed down my startup for mac now to almost 4 MINS!!! from 30seconds before. I have googled all the forums and tried the following without success :
- reinstalling the software
- deleting the PRAM
- selecting the Mac HDD as Startup disk but to no avail.
- scanned/fixed/verify all permissions
something must have corrupted the MAC OS...can anyone suggest a way out of this slow boot up? Its like having a ferrari but can only move after a rolling start.
View 11 Replies
View Related
Dec 2, 2009
I have a stock 2.53GHz 15" Unibody MacBook Pro (Oct 08) this morning when I started her up, she just went into the blank blue screen, and there was the rotating icon at the bottom of the screen. It would loop over and over. The icon would disappear, then reappear in a bit. I know it's not the hard disk, as I just booted into my Boot Camp partition which works perfectly. I'm on the latest snow leopard 10.6.2 if I'm not wrong?
View 5 Replies
View Related
Jul 6, 2010
I am currently on a macbook that I bought in the summer of 2008, and I just decided I wanted to be able to run Windows on my laptop. I found my WindowsXP installation disk, a factory disk, and opened up boot camp to install Windows. I was following instructions from another thread on another computer I have at home. I got through partitioning my disk and got the windowsXP installation ready to begin when I realized I couldn't find my MacOSX disk, and thus wouldn't be able to install the Windows drivers after installing Windows (I was running Mac OS X 10.5.8), so I stopped the installation there and un-partitioned my harddrive. I then ordered Mac OS X Snow Leopard 10.6.3, and I just received the CD today. I installed Snow Leopard, then did the same thing that I did before with boot camp and partitioned my drive. However, this time when I got to the part where I put in my Windows disk, the computer reboots and starts, but the Windows installation won't begin. It just sits at a black screen with a blinking cursor in the top left corner. I've tried giving it over 30 minutes to start but it just won't go. Logically I would assume there's a problem with the disk, but I used this same disk less than a week ago and got halfway through the installation without any problems. Why won't my WindowsXP installer disk boot up?
View 1 Replies
View Related
Jul 14, 2010
Have had boot camp working just how I wanted it (default boot into W7) since day 1, but have just had a problem! All of a sudden, the MBP boots into OSX by default. If I hold option (alt), I do have the option to boot into windows, but under disk utility in OSX, it cant see my W7 partition! Even when I boot into W7 manually, boot camp control panel only has OSX as the only boot disk! I have searched and returned a few instances of this, but all have the complication of people using NTFS tools, I havnt done that.
View 1 Replies
View Related
Feb 2, 2009
I have an older MacBook and when I bought it, from a friend, it already had windows running on it. Just the other day I went to restart my computer and all I got want the black screen saying that the computer was turned off wrong and to choose the start up mode. I tried the last known option and nothing happened besides restarting to the same screen. Then I tried the normal mode and that didn't work and safe mode did the same thing, starting back up to the black screen. Is there something that I can do/fix, or does this require some professional.
View 4 Replies
View Related
Feb 2, 2009
I've had a Vista 32 PC and it booted pretty fast. I now have a fully loaded iMac (newest one available) and Vista takes abnormally long to start. OS X boots very fast, and once Vista is loaded, it runs normal, no problems. I'm just wondering if there is a way to reduce the boot time, and why it would take longer to boot on this more powerful computer than my last generic PC, or if that's just a drawback of boot camp.
View 6 Replies
View Related
Feb 5, 2010
My G3 laptop has been in storage for over six months and won't start up. The power lead and clock battery are new. This happened before and Dianne the moderator at the time gave me a simple keystroke sequence to bring it back to life. Anyone out there know what that was?
View 8 Replies
View Related
Apr 12, 2009
Problem: powers up, will not complete start up sequence What led to the problem: Ignorance, mostly. CD was stuck in vertical bay and I tried someone's suggestion to eject via terminal. If you are laughing (and/or groaning), you know what must have happened. Here are steps taken to rectify disk eject and start up problems, with the results. Note: iMac install disk one remains in the vertical bay, unable to be read or ejected. applejack, fsck -fy ... multiple times. Results: disk & permissions repaired and/or verified but OSX still will not start up. It starts with grey screen, goes to blue with grey window. Progress bar moves slowly from left to right and seems to reach 100%. Operation stalls at that point. Note: Any attempt to use diskutil stalls and commands such as list, mount do not execute. drutil eject gave these results: dyld library not loaded: /system/library/Frameworks/OpenGL.framework/versions/A/openGL referenced from: /system/library/frameworks/QuartzCore.framework/versions/A/Quartzcore reason: image not foundTrace/BPT trap
View 3 Replies
View Related
Nov 21, 2010
In retrospect, I should have ignored it when Apple Software Update told me about the Boot Camp 3.2 upgrade for my 2006 Mac Pro running x64 Win 7 ultimate. When I ran it, it overwrote my blue tooth driver and my keyboard stopped working. Thanks for the folks at Mac Rumors forums, I was able to go through the procedure to get it working again, and I also had to update the video driver (again) from ATI for my 3800.
So then I decide to reboot into MacOS and discover that my icon for selecting the boot disk was gone, not to mention any directory or programs in the start menu. This happen to anyone else? Do I have to downgrade to 3.1 or does anyone have a recommendation to get 3.2 working?
View 7 Replies
View Related
Jul 16, 2009
im using boot camp for windows 7 and recently started to use vmware and ever since then the start up time is horribly long when before it was very fast. it takes a long time to get to the log in screen and then when i get to the desktop it stays black for a while longer. its not the worst thing in the world and a small price to pay to be able to run my boot camp partition alongside os x but i just want to make sure vmware is the culprit because if it isn't i might need to do some more digging to find the real problem.
btw im talking about starting windows through boot camp not through vmware.
View 1 Replies
View Related
Oct 8, 2009
I got the 64bit version of windows 7 from my the Microsoft Acedmic Alliance program. I downloaded it on my parents windows machine burned the .iso with nero and I went throught the boot camp assistant it asked me to put in the disk. the computer rebooted and then it was a black screen. The
The disk is a bootable disk because I used the same disk to install it on my parents windows laptop.
How do I get the disk to boot on my mac?
View 6 Replies
View Related
Jan 9, 2009
Booting my iMac after a crash the other (leopard 10.5.6) day I came across the problem that the boot sequence would seem to hang. Visibly I would see the apple logo and the spinning bar and it would sit there. Thinking that it may be hardware related I booted up and ran the hardware diags but these showed there was no issues. I then booted off the boot cd and ran diskutil to check the os disk and that check said that the OS disk was fine. I was unable to boot into safe mode at all. I could get into single user without any problems and fsck'ing the root fs didn't highlight any errors. So with the fs ok I'm thinking that this maybe an os problem but when I boot with verbose on I see that when it hangs it gets ioerrors on the root disk rdisk0s2.
In order to prove that there was a physical problem I booted up into single user and ran a dd from the os disk and that proved it. After that preamble, I guess my question here is what should I do now ? Is there an equivilent of the Solaris format command where it could map out any bad blocks ? Or from a safety point of view should I get the disk replaced ? Or maybe I should just reformat the drive and reload the os? I'm a solaris SA by trade and on a dev box I would get format to read analyze the disk and map out any bad blocks but in production I would definitely get the disk swapped so I'm in a bit of a quandary. Also if I get the disk swapped, should apple swap it as I have had the iMac for less than 12 months?
View 4 Replies
View Related
Jun 4, 2014
During the boot-sequence the screen of my Imac 27" flashes green (once), then returns to normal. This does not happen when I boot my Windows (Bootcamp) partition, so I assume this is some kind of OSX driver error. This started to happen only after I installed the latest patch (10.9.3). How to get rid of it ?
Info:
iMac, OS X Mavericks (10.9.3)
View 2 Replies
View Related
Oct 13, 2010
Is it possible to boot from an external Firewire DVD Drive? It certainly isnt from an external USB DVD. Real answers only please, not "I think so" ones based on HDDs or rumours you may have heard!...
Background:
I've got an MCE Optibay in my Mid-2010 i7 MBP. When installing Bootcamp it refuses to install from the external USB DVD drive. In the end I pulled the 2nd HDD out and reconnected the internal DVD. It then worked fine without a hitch. Then I reinstalled the 2nd HDD and all was fine for a few days.
Now I want to resize my Win7 partition (bigger, as MS Visual Studio's bigger than I thought, and I might stick some games on). I can shrink the OSX partition fine with Disk Utility, but windows won't grow the Win7 one because the empty space is before the Win7 partition, not after it. Apparently this can be done with GParted. Guess what? I can't boot the Linux based GParted CDROM from the external USB DVD drive! So, will a Firewire one work where USB fails, and solve my alternative OS booting issues? If I buy one I can then either use GParted, or delete the Win7 partition and start again without having to pull the laptop to bits all over again, only to put it back once I'm done, and possibly have the same issues in the future. Obviously I don't want to blow extra money getting a Firewire DVD drive though if it's a waste of money...
View 8 Replies
View Related
Dec 25, 2008
This is the 1st time i got a Mac , i bought a black Macbook 2.4GHz some days ago .
I installed Windows Vista Ultimate using Boot Camp , and all went smoothly .
Only 1 prob is when restarting , i have to wait too long for the Windows to log on , i think about 1min with the black screen.
And if i want to boot in Mac OS , i have to push down the D button or the Alt, it takes quite a long time too .
So do you guys have any solution to this problem ? I want to get rid of the waiting time, way too much.
And do you know how to make my Macbook jump right in the choosing section when it starts ? ( so that i dont have to push down any button when it starts )
View 4 Replies
View Related
Sep 17, 2009
Is there a way to make the Boot Camp menu the default boot screen, as opposed to holding Alt? This is the latest SL release, if that matters.
I know this is possible in some manner, our networked iMacs all do it; they start up and give the option to boot OS X or Windows, with a countdown to boot the default OS. I'd just like the same thing to happen on my MBP.
View 1 Replies
View Related
Sep 21, 2009
I have done some research on triple boot systems, and it appears that a third OS must be run virtually, but all the information I came across was a few years old. Microsoft is running a deal right now on Windows 7 for students so I would like to pick up a copy and try it out.
Is it possible to run 3 operating systems through Boot Camp 3.0? I am not interested in running a virtual OS.
Current Setup:
13" macbook pro
Snow Leopard and Windows XP through Boot Camp
View 1 Replies
View Related
Feb 18, 2010
I have been trying to install Windows 7 (yes, legit copy) to my Macbook Pro the whole day, but I keep on getting this error message saying "Press any key to boot from cd or dvd . . . ."
When I press any key on the keyboard, nothing happens. I know this copy works because I've tried this on VMWare 3. (I'm going to Boot Camp of BIOSHOCK!)
What I've Tried:
Deleted partition, recreate partition and choose the Windows 7 disk as startup disk.
View 15 Replies
View Related
Feb 19, 2010
Well I installed Vista Ultimate using boot camp on my 27 inch iMac using 10.6.2 and now I can't get it to boot in OSX. I tried holding the command key when rebooting but it just goes into the windows part. Looks like windows took over. Does anybody know how I can get it to boot in Leopard?
View 3 Replies
View Related
Jul 6, 2010
Have the new 15" MBP with i7 Processor. I had another MBP with a 7200RPM drive and installed drive in the new i7 Mac. Computer was working fine until I installed Windows via Boot Camp. I can't boot to the Mac Partition any more, the partition is there but when you try to boot to it you just see the Apple logo and NO circle. I cannot boot to the install CDs or a bootable external drive. I target disk mode the computer and used another computer to boot using the drive in the i7 unit and it's fine and I can see all the information. I tried booting the i7 into single user mode and saw the following message:
efiboot loaded from device: Acpi(PNP0A03,0)/Pci(1|1)/Ata(Primary,Master)/HD(Part 2,Sig********-****-****-****-************)
boot file path: SystemLibraryCoreServicesoot.efi
.Loading 'mach_kernel'...
................................................................................
View 6 Replies
View Related
Apr 24, 2009
I want to install XP using Boot Camp but when I run the Boot Camp Assistant I get the following message
Boot Camp Assistant can not be used
You must update your computer's Boot ROM firmware before using this setup assistant.
Now I have tried all firmware updates available on apple site but they say they are not needed, I'm on 10.5.6 and a friend of mine with same firmware runs his boot camp comfortably.
My Boot ROM Version:MB21.00A5.B07
SMC Version:1.17f0
View 1 Replies
View Related
Jul 20, 2009
I just installed Windows XP to a Boot Camp Partition on my MBP. However, rebooting is a hassle and naturally I want to avoid doing such as often as possible. I think running Parallels Desktop would suit my needs quite well. But here's the catch: I want to be able to use one partition to serve both of those needs. In other words I want have the option of booting through both Boot Camp or Parallels.
How would I go about doing this? I already have a XP installed via Boot Camp. So if there is a method where I don't have to reinstall, great, but I am fine with deleting stuff.
View 4 Replies
View Related
May 20, 2012
I'm using MacBook Pro 13" Late 2011 with 256gb SSD & OSX Lionafter I install boot camp + Windows 7 Professional when i restart to boot OSX it have blinking folder with question mark I've try using Option button to select drive but it have only internet recovery
Info:
MacBook
Pro, Mac OS X (10.7.4)
View 13 Replies
View Related
Jul 14, 2009
In my attempt to install Windows XP via Boot Camp, I accidentally inserted an SP1 disc instead of the SP2 disc that I have. The installation proceeded to the point where it does for most who attempt this: the screen where you are prompted to press ENTER. I could not proceed and therefore restarted the iMac and held down the mouse button upon start-up to remove the CD.
HERE IS THE PROBLEM:I can not boot into OS X because the keyboard shortcuts (those that might allow me to select which partition to boot from and/or reset PRAM) seem to be disabled. Instead, a reboot always ends at a black screen with a blinking DOS-esque cursor, or the prompt: "No bootable device -- insert boot disk and press any key."
I have attempted inserting my SP2 disc at this point, to no avail. My keyboard seems to be disabled, as if the SP1 install proceeded just enough to establish itself as the boot drive without drivers for the keyboard. I've tried using all 3 USB ports, disconnecting other USB devices. Oddly, my bluetooth mouse works to eject the CD on reboot...
View 9 Replies
View Related
May 30, 2008
I've been hearing good things about the Spinpoint Drives and the 750GB ones are coming down in price.Here is my current setup1 - 500MB Drive - Leopard2 - 320MB Drive - Vista 643 - 500MB Drive - FAT32 (Shared, Irrelevant)I plan on replacing drives 1 and 2 with 750GB Spinpoint drives.My question is, can I boot off of the Leopard dvd and put in Drive 1 and NewDrive1 and just clone it, and do the same for Drive2 and NewDrive2 and clone it? And then go into Leopard and resize the HFS partition, and go into Vista and resize the NTFS partition?
View 2 Replies
View Related
