Windows On Mac :: VMware Slowing Down Windows 7 Start Up Through Boot Camp?
Jul 16, 2009
im using boot camp for windows 7 and recently started to use vmware and ever since then the start up time is horribly long when before it was very fast. it takes a long time to get to the log in screen and then when i get to the desktop it stays black for a while longer. its not the worst thing in the world and a small price to pay to be able to run my boot camp partition alongside os x but i just want to make sure vmware is the culprit because if it isn't i might need to do some more digging to find the real problem.
btw im talking about starting windows through boot camp not through vmware.
i tried to install bootcamp while i still had vm ware fusion but i got that error saying backup the disk, format the drive into mac osx journaled and restore info back to that disc. So i uninstalled vm ware fusion and got the same error again but when installed vm ware fusion again the windows account was still there with all the files on it.
If i completely remove the windows account from vmware fusion and then intall bootcamp will it work if so how do i remove it.
Alright, so I've installed Windows 7 RC on my iMac with Boot Camp. Booting straight into Win everything works fine (I had some issues trying to connect my Wireless Keyboard and Mouse, but it's fine now). I have 3 issues:
1. Firstly, is there any way for me to access my files stored on the Mac partition in Windows (e.g. Music, Videos etc.)? I tried using HFS+ Explorer but it I get stuck at the 'AutoDetect Partition' phase because it says "No HFS+ Partition found". Any ideas?
2. Now I've also got VMWare Fusion running on my Mac, and when I start it, it detects my Windows partition and so I load Windows through it. The OS loads up fine, but for some reason it doesn't detect my WiFi adapter and so the Internet in Windows doesn't work (it works fine via Boot Camp). Is this normal (since maybe the WiFi is already connected through OS X so won't work in Windows at the same time)?
3. Lastly, I've installed the VMWare Tools in Windows, and it seemed to go on without a problem, but for some reason my 'Unity' option doesn't work. The button is there, but when I click it the Win7 window disappears. I figured, OK, probably just loading or something, but nothing happens. The VMWare main screen still shows that Windows is 'Powered On'.
I have recently got my first mac, and unfortunately I do have to run Windows-only software at school.
Is it possible to have a Boot Camp partion and a Vmware Fusion at the same time, so that I can run the "small" applications using Vmware Fusion and the applications with high system requirements using Boot Camp?
I'm ready to upgrade my MacBook 13" late 2006 model to a new 15 inch pro, and realize that, especially in the college environment where many professors demand windows, I should run it somehow. I've been doing extensive research for the last hour on the best way to run it, however I'm in a complete deadlock. Some people say just do boot camp, but I don't mind paying up to $100 extra if it will really be much smoother. Even when I try to compare the differences between VMware and Parallels (the latest versions of both), I don't see anything hugely significant. Plus, I see just as many complaints about both of them (I'm reading 1-star HORROR STORIES on amazon of each one), and really, really just want a smooth experience. So, my dear MacRumors friends, I come to you for advice. Which of the three programs do you recommend?
I got the 64bit version of windows 7 from my the Microsoft Acedmic Alliance program. I downloaded it on my parents windows machine burned the .iso with nero and I went throught the boot camp assistant it asked me to put in the disk. the computer rebooted and then it was a black screen. The
The disk is a bootable disk because I used the same disk to install it on my parents windows laptop.
I'm currently running Parallels 3.0 (XP Pro) off of a Boot Camp partition on my Macbook Pro. I'd like to give VMWare Fusion an audition, and am wondering if I can run it off that same BC partition that Parallels uses -- or if that will create some kind of conflict that might damage the partition. I'm not talking about having Parallels and VMWare running _simultaenously_ -- only installing them both to use the same partition.
I installed Vmware Fusion 2 awhile back and liked how I could share the pictures and music folders between my Mac (which they were stored on) and the Vmware Fusion 2 Windows install. However, i was disappointed on how sluggish it was. So I (after some initial trouble) partitioned my hard drive and installed Windows 7 on the Boot Camp partition. However, now i cannot share folders between my mac and windows. Is there a way to do this?
I'm running the latest high end 21.5" iMac and I've had Windows 7 64 bit working through boot camp and VMWare Fusion since I got the computer. Everything's been fine, but now all of a sudden, windows won't start through boot camp. When I start up the computer, I select boot camp and it freezes. Still works through VMWare.
I'm running the latest update of Leopard and Windows XP SP2 in a 20 GB FAT32 partition, on a 24" iMac Al (Fall 2007). I've been out of the country for the last 5 months, but when I left my computer, safe and sound at home, XP booted fine with Boot Camp. I had the latest Mac OS software as of August 2008.
Now, I've returned and the first thing I did was Software update and refresh my system. I've tried to boot in Windows, and I got a black screen with a blinking white underscore on the top left corner - the operating system doesn't load.
Does anyone know of any software updates that could have affected my Windows installation? I somehow doubt that, without use, the Windows installation managed to screw itself up, but I suppose it is Windows, isn't it?
I am currently on a macbook that I bought in the summer of 2008, and I just decided I wanted to be able to run Windows on my laptop. I found my WindowsXP installation disk, a factory disk, and opened up boot camp to install Windows. I was following instructions from another thread on another computer I have at home. I got through partitioning my disk and got the windowsXP installation ready to begin when I realized I couldn't find my MacOSX disk, and thus wouldn't be able to install the Windows drivers after installing Windows (I was running Mac OS X 10.5.8), so I stopped the installation there and un-partitioned my harddrive. I then ordered Mac OS X Snow Leopard 10.6.3, and I just received the CD today. I installed Snow Leopard, then did the same thing that I did before with boot camp and partitioned my drive. However, this time when I got to the part where I put in my Windows disk, the computer reboots and starts, but the Windows installation won't begin. It just sits at a black screen with a blinking cursor in the top left corner. I've tried giving it over 30 minutes to start but it just won't go. Logically I would assume there's a problem with the disk, but I used this same disk less than a week ago and got halfway through the installation without any problems. Why won't my WindowsXP installer disk boot up?
Have had boot camp working just how I wanted it (default boot into W7) since day 1, but have just had a problem! All of a sudden, the MBP boots into OSX by default. If I hold option (alt), I do have the option to boot into windows, but under disk utility in OSX, it cant see my W7 partition! Even when I boot into W7 manually, boot camp control panel only has OSX as the only boot disk! I have searched and returned a few instances of this, but all have the complication of people using NTFS tools, I havnt done that.
I have an older MacBook and when I bought it, from a friend, it already had windows running on it. Just the other day I went to restart my computer and all I got want the black screen saying that the computer was turned off wrong and to choose the start up mode. I tried the last known option and nothing happened besides restarting to the same screen. Then I tried the normal mode and that didn't work and safe mode did the same thing, starting back up to the black screen. Is there something that I can do/fix, or does this require some professional.
I've had a Vista 32 PC and it booted pretty fast. I now have a fully loaded iMac (newest one available) and Vista takes abnormally long to start. OS X boots very fast, and once Vista is loaded, it runs normal, no problems. I'm just wondering if there is a way to reduce the boot time, and why it would take longer to boot on this more powerful computer than my last generic PC, or if that's just a drawback of boot camp.
In my attempt to install Windows XP via Boot Camp, I accidentally inserted an SP1 disc instead of the SP2 disc that I have. The installation proceeded to the point where it does for most who attempt this: the screen where you are prompted to press ENTER. I could not proceed and therefore restarted the iMac and held down the mouse button upon start-up to remove the CD.
HERE IS THE PROBLEM:I can not boot into OS X because the keyboard shortcuts (those that might allow me to select which partition to boot from and/or reset PRAM) seem to be disabled. Instead, a reboot always ends at a black screen with a blinking DOS-esque cursor, or the prompt: "No bootable device -- insert boot disk and press any key."
I have attempted inserting my SP2 disc at this point, to no avail. My keyboard seems to be disabled, as if the SP1 install proceeded just enough to establish itself as the boot drive without drivers for the keyboard. I've tried using all 3 USB ports, disconnecting other USB devices. Oddly, my bluetooth mouse works to eject the CD on reboot...
I just purchased a new iMac (2.66 c2d & 4gb of ram), Parallels 4, and Windows XP. I would like to get great performance whenever I use Windows XP and would like to know which installation procedure would help accomplish that.
Would Parallels provide me with a better user experience by installing Windows directly via Parallels OR by having Parallels utilizing a Boot Camp Partition? Which is better and why? Also, how much memory should I allocate to Parallels/Windows XP?
Last night I installed VMWare Fusion and Windows 7 on my Unibody MBP running SL. When I use Fusion, my computer slows to a crawl. I spent a few hours getting Windows set up and installing software last night.
I would like to try using Boot Camp instead, but do not want to lose all of the software and files that I have installed. Is it possible to set up Boot Camp, and keep the same Windows setup?
hi! i'm planning to install windows 7 64-bit in my mbp, problem is i looked at the requirements needed and it stated that i needed boot camp update 3.1. i checked my boot camp version and it stated that i had 3.0.1, tried using software update, but states that i had no updates available. what should i do? and what else do i have to keep in mind while installing windows using boot camp. thanks in advance!
I use to be able to select the vista partition to restart into from the configuration pages in leopard on my macbook pro, but now my bootcamp partition is missing. I have to hold the option button to manually select the windows partition and then load into windows. Some setting somewhere must be lost. Does anyone know how to restore it?
This is my first post here... even though, I've read a lot of the things on this forum, but never decided to post a question 'til now... now that i bought a macbook pro that is.
Actually I have some sort of annoyance with boot camp. It works as it's intended (with windows 7, which is a miracle, because everyone complains about that combination). But whenever I boot up and press "alt" to select the hard drive i want to boot, it always shows Windows. Can i change it for something else? and, how can I do it? Both of my partitions have names of their own... they're not generic... but still, they are not working, what can I do??
I'm trying to install Windows 7 and can't get the boot camp assistant to partition my drive. The drive in question is 500GB with over 200GB free space. I want a Windows partition of 35-40GB.On first attempt I kept getting the cannot move files error when trying to partition. I read up on the error online, and most people suggested issues with parallels or needing to use idefrag. I had parallels on my machine at one point, but am not sure if there are any problem folders still hiding somewhere. Any tips on that part?I ran idefrag overnight last night. When I booted the machine up this morning, I launched it again to verify that the disk was defraged. Boot camp still doesn't want to play.
I have a Macbook Pro and I'm hoping to install Windows Vista via Boot Camp. Is it possible to do this with a Dell reinstallation DVD that came with my Dell laptop?
1 - I have an early 2008 iMac 24" and ordered Snow Leopard disc from Apple 2 - After installation of Win7 64 bit and problems with boot camp 3.1 drivers support then tells me my computer will not run windows 7 64 bit and sends me a list of non-compatibles. Sure enough mine is one.
3 - Several respondents help me and it appears that 64 bit will run but still trouble with keyboard/mouse.4 - uninstall 64 bit and install 32 bit and related boot camp drivers5 - numeric keypad on apple keyboard still does not work with office 20106 - just tried to update drivers for win 32 but it says more current ones are installed??? I guess that is from the attempt to install 3.1 for win 64 unsuccessfully?7 - Now support lists computers that will not run windows 7 and mine is not on that list.
right now i'd be a happy camper if someone could just tell me how to get the Apple keyboard that came with my iMac and the numeric keypad working when in Windows or Office.
I created a Boot Camp Partition (an entire drive, actually) and installed XP. The install went off without a hitch ... Except, having rebooted to Mac OS X (10.6.1) there is no way to boot Windows again. Going to Preferences->Boot Disk shows no Book Camp bootable drive.
On Windows I noticed there was an icon in the bottom right (next to the clock) that I could right click and then restart in Mac OS X. Is there a similar thing for OS X that I can just click in the menu bar and restart in Windows?
So i installed windows 7 on my macbook (not aluminum) and when i go to install the boot camp drivers off of the retail leopard CD i get an error that says that I can't because it only installs on vista or XP. My laptop came with Tiger CD's so i can't get them off of there.
I am trying to set up a Parallels 4 VM for a Windows 7 x64 Build 7000 boot camp partition, but parallels tools will not install. Half way through the process, a windows unsigned driver security box pops up, and when I tell it to install anyway, it still rolls back the installation process and I get the message "An error has occured while installing parallels tools, click OK to restart your computer and try again." or something to that effect. I have tried this about 15 times, and I have tried uninstalling/deleting the VM and re-creating the VM to no avail.
What I want to know: Is there a way to manually install Parallels Tools while running in the boot camp partition, just like installing any other application? I want to install it outside of Parallels, since for some reason it keeps screwing itself up when trying to set up the drivers as a VM.
I was able to get Windows Vista 64 running on my 17" MBP, it is pretty slick. I set aside 32 GB for Windows, ran the install, loaded all the appropriate Boot Camp drivers and everything is working perfectly in Windows. I boot back to OS X to attempt to configure Parallels...
So I fired up Parallels and follow the guided instructions. However, when I get to step 2 Im not sure what I should be doing. I already have Windows on its own partition, but Parallels is asking me for a CD/DVD image. Im a little leery of putting the Win disc back in, I dont want Parallels to always want to boot from the disc. how do I tell Parallels to load Windows as a Virtual Machine off of the Boot Camp partition?
The partition Boot Camp created now appears on my Desktop in OS X as Untitled, I can not, for the life of me, figure out how to change that. If I eject that volume will I still be able to Boot to Windows? Will Parallel still work?
So I finally got Windows 7 64bit installed on my MBP 2.33 machine.
However, from the guides, I should just insert my leopard disc and it should run. This is the thing, I don't know where my leopard disc is (i've been moving a lot lately due to being unemployed) and its either lost or packed away somewhere. I have a backup copy on my time machine drive and haven't tried that yet. I downloaded a 2.1 extraction and burned it to CD though. I inserted the CD and I can see in windows 7 three applications. One is Windows XP, the others are Windows Vista 32 and Windows Vista 64. I click the Vista 64, but nothing happens at all, and no drivers are isntalled.
