I'm running the latest update of Leopard and Windows XP SP2 in a 20 GB FAT32 partition, on a 24" iMac Al (Fall 2007). I've been out of the country for the last 5 months, but when I left my computer, safe and sound at home, XP booted fine with Boot Camp. I had the latest Mac OS software as of August 2008.
Now, I've returned and the first thing I did was Software update and refresh my system. I've tried to boot in Windows, and I got a black screen with a blinking white underscore on the top left corner - the operating system doesn't load.
Does anyone know of any software updates that could have affected my Windows installation? I somehow doubt that, without use, the Windows installation managed to screw itself up, but I suppose it is Windows, isn't it?
I'm running the latest high end 21.5" iMac and I've had Windows 7 64 bit working through boot camp and VMWare Fusion since I got the computer. Everything's been fine, but now all of a sudden, windows won't start through boot camp. When I start up the computer, I select boot camp and it freezes. Still works through VMWare.
im using boot camp for windows 7 and recently started to use vmware and ever since then the start up time is horribly long when before it was very fast. it takes a long time to get to the log in screen and then when i get to the desktop it stays black for a while longer. its not the worst thing in the world and a small price to pay to be able to run my boot camp partition alongside os x but i just want to make sure vmware is the culprit because if it isn't i might need to do some more digging to find the real problem.
btw im talking about starting windows through boot camp not through vmware.
I got the 64bit version of windows 7 from my the Microsoft Acedmic Alliance program. I downloaded it on my parents windows machine burned the .iso with nero and I went throught the boot camp assistant it asked me to put in the disk. the computer rebooted and then it was a black screen. The
The disk is a bootable disk because I used the same disk to install it on my parents windows laptop.
I am currently on a macbook that I bought in the summer of 2008, and I just decided I wanted to be able to run Windows on my laptop. I found my WindowsXP installation disk, a factory disk, and opened up boot camp to install Windows. I was following instructions from another thread on another computer I have at home. I got through partitioning my disk and got the windowsXP installation ready to begin when I realized I couldn't find my MacOSX disk, and thus wouldn't be able to install the Windows drivers after installing Windows (I was running Mac OS X 10.5.8), so I stopped the installation there and un-partitioned my harddrive. I then ordered Mac OS X Snow Leopard 10.6.3, and I just received the CD today. I installed Snow Leopard, then did the same thing that I did before with boot camp and partitioned my drive. However, this time when I got to the part where I put in my Windows disk, the computer reboots and starts, but the Windows installation won't begin. It just sits at a black screen with a blinking cursor in the top left corner. I've tried giving it over 30 minutes to start but it just won't go. Logically I would assume there's a problem with the disk, but I used this same disk less than a week ago and got halfway through the installation without any problems. Why won't my WindowsXP installer disk boot up?
Have had boot camp working just how I wanted it (default boot into W7) since day 1, but have just had a problem! All of a sudden, the MBP boots into OSX by default. If I hold option (alt), I do have the option to boot into windows, but under disk utility in OSX, it cant see my W7 partition! Even when I boot into W7 manually, boot camp control panel only has OSX as the only boot disk! I have searched and returned a few instances of this, but all have the complication of people using NTFS tools, I havnt done that.
I have an older MacBook and when I bought it, from a friend, it already had windows running on it. Just the other day I went to restart my computer and all I got want the black screen saying that the computer was turned off wrong and to choose the start up mode. I tried the last known option and nothing happened besides restarting to the same screen. Then I tried the normal mode and that didn't work and safe mode did the same thing, starting back up to the black screen. Is there something that I can do/fix, or does this require some professional.
I've had a Vista 32 PC and it booted pretty fast. I now have a fully loaded iMac (newest one available) and Vista takes abnormally long to start. OS X boots very fast, and once Vista is loaded, it runs normal, no problems. I'm just wondering if there is a way to reduce the boot time, and why it would take longer to boot on this more powerful computer than my last generic PC, or if that's just a drawback of boot camp.
In retrospect, I should have ignored it when Apple Software Update told me about the Boot Camp 3.2 upgrade for my 2006 Mac Pro running x64 Win 7 ultimate. When I ran it, it overwrote my blue tooth driver and my keyboard stopped working. Thanks for the folks at Mac Rumors forums, I was able to go through the procedure to get it working again, and I also had to update the video driver (again) from ATI for my 3800.
So then I decide to reboot into MacOS and discover that my icon for selecting the boot disk was gone, not to mention any directory or programs in the start menu. This happen to anyone else? Do I have to downgrade to 3.1 or does anyone have a recommendation to get 3.2 working?
In my attempt to install Windows XP via Boot Camp, I accidentally inserted an SP1 disc instead of the SP2 disc that I have. The installation proceeded to the point where it does for most who attempt this: the screen where you are prompted to press ENTER. I could not proceed and therefore restarted the iMac and held down the mouse button upon start-up to remove the CD.
HERE IS THE PROBLEM:I can not boot into OS X because the keyboard shortcuts (those that might allow me to select which partition to boot from and/or reset PRAM) seem to be disabled. Instead, a reboot always ends at a black screen with a blinking DOS-esque cursor, or the prompt: "No bootable device -- insert boot disk and press any key."
I have attempted inserting my SP2 disc at this point, to no avail. My keyboard seems to be disabled, as if the SP1 install proceeded just enough to establish itself as the boot drive without drivers for the keyboard. I've tried using all 3 USB ports, disconnecting other USB devices. Oddly, my bluetooth mouse works to eject the CD on reboot...
I am soft of new to Mac OS X Leopard (Got it about two or three weeks ago). I was just wondering how to use Boot Camp. I know it runs windows programs on your computer but do you have to install anything (i.e. Windows XP)? If you guys could help me out that would be really cool.
I tried installing Windows XP on to my MacBook running Leopard last November using an XP installment disk that came with a Dell Desktop. So that worked out well, until Boot Camp told me to print out an instruction sheet. Well, I don't have a printer connected to my MacBook, so I continued the installation without it.
The installation apparently 'finished' so I clicked "finish" but the whole installation process went back to the beginning, so I had to force quit the installation (my MacBook was running from just the disk, not 'Macintosh HD'). By the way, I went through the installation process a couple of times before I thought "this is just keep on repeating."
Well, whenever I go to boot up my MacBook now, a message comes up in a black background with white writing saying "No bootable disk, press any key to continue." Pressing any key doesn't work, so I have to hold down the power button (which I hate doing since it's apparently bad for the HDD) to turn it off, and I now have to hold down the alt/option key whenever I start up my Mac. By the way, the only disk that comes up is 'Macintosh HD', not the 'Windows HD' I partitioned earlier, which I have now deleted. My question is, what else can I do to completely erase this message I get at the start up?
I installed Boot Camp on my machine and removed it thereafter. However it has slowed down my startup for mac now to almost 4 MINS!!! from 30seconds before. I have googled all the forums and tried the following without success :
- reinstalling the software
- deleting the PRAM
- selecting the Mac HDD as Startup disk but to no avail.
- scanned/fixed/verify all permissions
something must have corrupted the MAC OS...can anyone suggest a way out of this slow boot up? Its like having a ferrari but can only move after a rolling start.
I have a stock 2.53GHz 15" Unibody MacBook Pro (Oct 08) this morning when I started her up, she just went into the blank blue screen, and there was the rotating icon at the bottom of the screen. It would loop over and over. The icon would disappear, then reappear in a bit. I know it's not the hard disk, as I just booted into my Boot Camp partition which works perfectly. I'm on the latest snow leopard 10.6.2 if I'm not wrong?
I created a Boot Camp Partition (an entire drive, actually) and installed XP. The install went off without a hitch ... Except, having rebooted to Mac OS X (10.6.1) there is no way to boot Windows again. Going to Preferences->Boot Disk shows no Book Camp bootable drive.
This is the 1st time i got a Mac , i bought a black Macbook 2.4GHz some days ago .
I installed Windows Vista Ultimate using Boot Camp , and all went smoothly .
Only 1 prob is when restarting , i have to wait too long for the Windows to log on , i think about 1min with the black screen.
And if i want to boot in Mac OS , i have to push down the D button or the Alt, it takes quite a long time too .
So do you guys have any solution to this problem ? I want to get rid of the waiting time, way too much.
And do you know how to make my Macbook jump right in the choosing section when it starts ? ( so that i dont have to push down any button when it starts )
I have been trying to install Windows 7 (yes, legit copy) to my Macbook Pro the whole day, but I keep on getting this error message saying "Press any key to boot from cd or dvd . . . ."
When I press any key on the keyboard, nothing happens. I know this copy works because I've tried this on VMWare 3. (I'm going to Boot Camp of BIOSHOCK!)
What I've Tried:
Deleted partition, recreate partition and choose the Windows 7 disk as startup disk.
Well I installed Vista Ultimate using boot camp on my 27 inch iMac using 10.6.2 and now I can't get it to boot in OSX. I tried holding the command key when rebooting but it just goes into the windows part. Looks like windows took over. Does anybody know how I can get it to boot in Leopard?
Have the new 15" MBP with i7 Processor. I had another MBP with a 7200RPM drive and installed drive in the new i7 Mac. Computer was working fine until I installed Windows via Boot Camp. I can't boot to the Mac Partition any more, the partition is there but when you try to boot to it you just see the Apple logo and NO circle. I cannot boot to the install CDs or a bootable external drive. I target disk mode the computer and used another computer to boot using the drive in the i7 unit and it's fine and I can see all the information. I tried booting the i7 into single user mode and saw the following message:
I just installed Windows XP to a Boot Camp Partition on my MBP. However, rebooting is a hassle and naturally I want to avoid doing such as often as possible. I think running Parallels Desktop would suit my needs quite well. But here's the catch: I want to be able to use one partition to serve both of those needs. In other words I want have the option of booting through both Boot Camp or Parallels.
How would I go about doing this? I already have a XP installed via Boot Camp. So if there is a method where I don't have to reinstall, great, but I am fine with deleting stuff.
I just purchased a new iMac (2.66 c2d & 4gb of ram), Parallels 4, and Windows XP. I would like to get great performance whenever I use Windows XP and would like to know which installation procedure would help accomplish that.
Would Parallels provide me with a better user experience by installing Windows directly via Parallels OR by having Parallels utilizing a Boot Camp Partition? Which is better and why? Also, how much memory should I allocate to Parallels/Windows XP?
Last night I installed VMWare Fusion and Windows 7 on my Unibody MBP running SL. When I use Fusion, my computer slows to a crawl. I spent a few hours getting Windows set up and installing software last night.
I would like to try using Boot Camp instead, but do not want to lose all of the software and files that I have installed. Is it possible to set up Boot Camp, and keep the same Windows setup?
hi! i'm planning to install windows 7 64-bit in my mbp, problem is i looked at the requirements needed and it stated that i needed boot camp update 3.1. i checked my boot camp version and it stated that i had 3.0.1, tried using software update, but states that i had no updates available. what should i do? and what else do i have to keep in mind while installing windows using boot camp. thanks in advance!
I use to be able to select the vista partition to restart into from the configuration pages in leopard on my macbook pro, but now my bootcamp partition is missing. I have to hold the option button to manually select the windows partition and then load into windows. Some setting somewhere must be lost. Does anyone know how to restore it?
This is my first post here... even though, I've read a lot of the things on this forum, but never decided to post a question 'til now... now that i bought a macbook pro that is.
Actually I have some sort of annoyance with boot camp. It works as it's intended (with windows 7, which is a miracle, because everyone complains about that combination). But whenever I boot up and press "alt" to select the hard drive i want to boot, it always shows Windows. Can i change it for something else? and, how can I do it? Both of my partitions have names of their own... they're not generic... but still, they are not working, what can I do??
I'm trying to install Windows 7 and can't get the boot camp assistant to partition my drive. The drive in question is 500GB with over 200GB free space. I want a Windows partition of 35-40GB.On first attempt I kept getting the cannot move files error when trying to partition. I read up on the error online, and most people suggested issues with parallels or needing to use idefrag. I had parallels on my machine at one point, but am not sure if there are any problem folders still hiding somewhere. Any tips on that part?I ran idefrag overnight last night. When I booted the machine up this morning, I launched it again to verify that the disk was defraged. Boot camp still doesn't want to play.
I have a Macbook Pro and I'm hoping to install Windows Vista via Boot Camp. Is it possible to do this with a Dell reinstallation DVD that came with my Dell laptop?
1 - I have an early 2008 iMac 24" and ordered Snow Leopard disc from Apple 2 - After installation of Win7 64 bit and problems with boot camp 3.1 drivers support then tells me my computer will not run windows 7 64 bit and sends me a list of non-compatibles. Sure enough mine is one.
3 - Several respondents help me and it appears that 64 bit will run but still trouble with keyboard/mouse.4 - uninstall 64 bit and install 32 bit and related boot camp drivers5 - numeric keypad on apple keyboard still does not work with office 20106 - just tried to update drivers for win 32 but it says more current ones are installed??? I guess that is from the attempt to install 3.1 for win 64 unsuccessfully?7 - Now support lists computers that will not run windows 7 and mine is not on that list.
right now i'd be a happy camper if someone could just tell me how to get the Apple keyboard that came with my iMac and the numeric keypad working when in Windows or Office.
