Trying to install Windows XP via Boot Camp, I get this error:
I have an external hard drive with enough space to back up my computer, but I don't know what to do after that. Can someone tell me what to back it up with so I can restore it after I format my computer, and how to restore it?
I assume to format the drive I use Disk Utility from my install CD?
I'm having problems with a Boot Camp partition and XP Professional SP2.
I setup a 20GB partition on my drive (I'm using a MacBook Pro, 3GB, 120GB hard drive). It's the only partition other than the one I use for OS X.
I didn't have full-install SP2 discs, only an upgrade. So I went to Fry's and bought a legal, new OEM disc and license for XP Professional SP2, full-install. I ran the installer and all went well...until I rebooted. At that point, Windows wouldn't load giving me a non-system disc error.
I am trying to install Win 7 through Boot Camp, everytime it gets to installing at 1% I get an error message. Windows cannot installed required files. Files missing or Corrupt 0x80070570. What I've tried:
- Using 32 Bit instead of 64 Bit Windows
- Burning both at low speeds (Disk Utilities and IMGBurn)
- Tried installing XP then doing an upgrade to Win 7, but only have XP Upgrade and eject key doesn't work during installation when prompted for older version verification.
Anyone experinced or heard of this before?
like a number of ppl, I only had a legit XP Pro SP1 and not an SP2 version as required for a seamless Boot Camp install. (Actually I do have a legit SP2 CD but the activation key has been mislaid!... damn). I was looking at going down the somewhat convoluted "slipstream" path to generate a working SP2 build utilising the SP1 key I had but what I have found is that the BootDir registry hack that had been used in the past for SP3 compatibility, also works for SP1 installs. Basically the problem is that the Apple supplied Windows drivers requires the Installer from an SP2 build and the SP2 update fails on a Boot Camp partition without the BootDir hack. So my suggested install method is as follows... ymmv. (Note this has been done with two identical MacBook Pro's with the latest Leopard build). Create the BootCamp partition as per the standard instructions and using your XP Pro SP1 CD going through the usual Windows install dialogs to the point where it want's to restart. I have found that when the Windows tries to shutdown to perform a restart that it hangs. Just hold down the power button on the Mac to force a shutdown leaving a minute or so just in case Windows is being slow. Boot back to Windows (via standard Boot Camp Option button) and perform the registry hack as published elsewhere for SP3 updates. Basically it is adding a key 'BootDir' with a value of 'C:' to HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionSetup
Note that you need to be able to right click on the mouse in regedit to create this key and at this point without the Apple drivers installed I don't think trackpad supports this so I have used a generic two button USB mouse. Once this registry entry is added you can install the SP2 update (as downloaded from Microsoft - WindowsXP-KB835935-SP2-ENU.exe). Once again I have found that Windows still hangs after the SP2 install restart until the Apple updates are applied... so nail the power button again after a pause or two. Once you are back to Windows again you can now install the Apple drivers found on the Disk 1 of you Leopard CD although I would recommend downloading the latest v2.1 from Apple if not. (Note there is a minor update to v2.1.1 available through the Apple Software Installation program). I am not sure if you could go direct to SP3 using this method but I have tended to stick with SP2 as SP3 tends to slow bootup/shutdown. Most Mac users would use FireFox/Safari in preference to IE so you have already improved the security of XP
how to make a boot camp installation with three partitions?
I mean one for mac, one for windows and one for data to be shared between the OS's? When I try to create 3 partitions on leopard installation, when I start the boot camp assistant, it doesn't work. Or when I create an extra partition inside windows, mac is not able to see it.
I have one program that I will have to run in boot camp. The rest of the time, I would like to run in Parallels. Will I have to install XP twice to do this and thus take up more hard drive?
View 2 Replies View RelatedI am currently on a macbook that I bought in the summer of 2008, and I just decided I wanted to be able to run Windows on my laptop. I found my WindowsXP installation disk, a factory disk, and opened up boot camp to install Windows. I was following instructions from another thread on another computer I have at home. I got through partitioning my disk and got the windowsXP installation ready to begin when I realized I couldn't find my MacOSX disk, and thus wouldn't be able to install the Windows drivers after installing Windows (I was running Mac OS X 10.5.8), so I stopped the installation there and un-partitioned my harddrive. I then ordered Mac OS X Snow Leopard 10.6.3, and I just received the CD today. I installed Snow Leopard, then did the same thing that I did before with boot camp and partitioned my drive. However, this time when I got to the part where I put in my Windows disk, the computer reboots and starts, but the Windows installation won't begin. It just sits at a black screen with a blinking cursor in the top left corner. I've tried giving it over 30 minutes to start but it just won't go. Logically I would assume there's a problem with the disk, but I used this same disk less than a week ago and got halfway through the installation without any problems. Why won't my WindowsXP installer disk boot up?
View 1 Replies View RelatedI just updated my (2006 Intel Core 2 Duo 2.16 GHz 15") MacBookPro to Leopard 10.5.6 I installed Windows XP SP3 through bootcamp, and everything was fine, but after i was done installing the BootCamp drivers from the Leopard disk and I restarted the computer,and booted back into windows, it would load to windows show my desktop for about 5 seconds then reboot itself (no error messages). So I mounted the windows partition again, same thing, over and over, I must have done it 20 times.I even tried doing the bootcamp 2.1 update and it didn't work. So i restored windows to the previous working settings and the bootcamp drivers were gone. So Windows works now but i am not abled to use the wifi or any multi touch or anything. I have also deleted the Windows partition and reinstalled it from the beginning and the same thing happened after installing the bootcamp drivers.
View 5 Replies View RelatedI have a 1st generation macbook pro running snow leopard 10.6. I've been trying to install windows xp, vista, or 7 using bootcamp but for some odd reason i cannot boot into the cd. I put the cd in and made sure the macbook is reading it (which it is because the icon shows up on the desktop) before i hit "start installation". the laptop would restart but it doesnt boot into the cd, it just goes right into the gray screen and stays there while i hear the cd spinning. I've installed windows xp using this method but that was about 4 years ago, for some reason the hard drive died on me so i have to do this whole process over again. I dont recall having this problem either.
View 3 Replies View RelatedI made my bootcamp partition small at 16 gb (apparently far too small) since I was just going to use it for a couple of programs. I went to install a game and it looks like windows 7 on it's own is taking up 14 gigs. Is this normal?
View 9 Replies View RelatedFollowed this guide [URL] and everything went smoothely, except when I came to step 24 I dont see the icon in the system tray. Also tried to run the program in the boot camp folder, but nothing happens. No big deal I think, but would be nice to have everything work properly.
View 1 Replies View RelatedI just recently purchased a 13" MBP Unibody and I'm thinking about installing Windows 7 (64-Bit) on it. If I install Windows with Boot Camp, and then install Parallels, do I need to make another Windows partition, or will it use the partition created in Boot Camp? Should I install Windows using Boot Camp first and then Parallels, or the other way around?
View 7 Replies View RelatedI'm trying to install windows xp professional sp3 from an iso I torrented. I burned it to a disc, but my computer can't find the disc during the start of installation ("No bootable device, press any key").
View 1 Replies View RelatedI did a problem free install of Win-doze xp pro sp.2 via Boot Camp and all was well, everything went off without a hitch... However I only partitioned 35 GB for Win-doze which after some thought I realized that having installed windoze for the sole purpose of playing games (which require alot of space) Anyway, I played a few games like "Crysis" and "The Last Remnant" both worked fantastically but I didn't want to get too far in them just to have to re-do the boot camp later and lose the data, so I went ahead and uninstalled the windoze partition and proceeded to go through the motions again, However this time around I set aside a 200GB partition. For some reason everything seemed to take MUCH longer, or instance it sat on the "restarting computer..." screen for 5-10 minutes, finally restarted then windoze loaded and went to the collecting information;Dynamic update;preparing installation;installing windoze
View 4 Replies View RelatedI've got my MSDN W7x64 Ultimate DVD burned, and when I reboot to install it (after using Boot Camp Assistant) it always hangs and never brings up the graphical installation screen. I tried Safe Mode, only to see that it stops after disk.sys loads. Anyone else having this issue or found a way to fix it?
View 2 Replies View RelatedSo my old 15" early 2006 Macbook Pro (1,1) no loger recognizes the primary display. I can use an external monitor just fine, but when I go into System Profiler, it's like my primary display disappeared. I reinstalled Snow Leopard, reset PRAM, NVRAM, repaired my permissions, tried to update my mac, but litterally nothing I have tried has worked.
It started when I tried to install both Windows 7 and Ubuntu. After completing the Windows 7 installation, I restarted my computer and it just hung on the Apple logo. I could feel the fans begining to spin really fast and it felt like my laptop was on fire. I restarted my computer, let it cool down, and it hung at the Apple logo again. I rebooted it a final time, and nothing. Black screen. No backlight or image...nothing.
Info:
MacBook Pro 15 inch, Mac OS X (10.4.7)
I have been trying to install Windows XP Pro SP3 on my MacBook, and after the installation finishes, I get an error saying that hal.dll can't be found. Really strange. Windows 7 installs fine, but I'd like to install XP for nostalgia's sake.
The disc is clean and I get no errors during install.
I'm a new MAC user and would need to install XP on my MAC. I'm sure there are thousands of threads out there about this but I couldn't find one. I've tried installing with Boot Camp and got Disk Error. Realised I had Service Pack One. The CPU then wouldn't boot properly as it looked for the WIN CD later so I have to hold down the Option key every time I boot up. I now have XP Pro with SP3 and have partitioned the space (20gb). Just don't want to mess it up so I'll wait for a reply here.
View 8 Replies View RelatedI know this question has probably been answered somewhere, but I can't seem to find anything quite like my situation.
I'm resizing the Windows partition on a 2.2GHz 15" Macbook Pro. I deleted the partition using Boot Camp, but when I went back to repartition it, I get the error that states:
"The disk cannot be partitioned because some files cannot be moved. - Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume ..."
However, according to Disk Utility, there's only one partition on the drive, and it's correctly formatted. I'm not missing any hard drive space or anything. Is there any way to fix this without going through the hassle of reformatting my hard drive?
I have a small problem. My mac pro (2007) was broken about two weeks ago. Now I have it back but I have a new problem (probably caused by updates by apple). I always used dual boot with windows 7 64 bit, but now it just won't install it anymore.
I use my first HD (320GB) for my 2 os (so snow leopard has 200GB and windows has 100GB). Just like I always did, but now I gives 2 errors:
1. After creating a partition with boot camp, the windows installer says that he cannot install on that partition because he needs NTFS (and it's FAT32).
On my new MBP, I had Tiger and Boot Camp 1.4 Beta.
When I got my Leopard UTD disc, I simply did an upgrade. Last night, I was fed up with some of the weirdness, and decided to start with a clean slate.
I removed my windows/boot camp partition, popped in my Leopard disc, selected erase and Install, and within 30 minutes it was done (seems way too fast...wtf?)
Anyway, I go through the Boot Camp steps to install Windows. When I get to the Windows setup where you select a drive to install, it doesn't give me the option to format the Boot Camp C: drive, but instead just installs.
After rebooting, it gives me a DISK ERROR.
A bit of googling shows others have had this problem, too. Is EVERYONE having this problem? Did Apple break Boot Camp with Leopard?
Is there any viable workout other than formatting to Tiger, installing 1.4, then upgrading again?
Is it possible to uninstall the Boot Camp assistant on Leopard and find/download/install Boot Camp 1.4 on Leopard, and go from there?
I need windows for school - and this is driving me nuts!
When i boot into Vista at the boot ing Windows Vista black screen, i get an error message that says... Warning: unrecognized partition table for drive 80. please rebuild it using a Microsoft-compatible FDISK tool(err=4) System tyhpe is NTFS, partition type 0x7 then it goes, and lists that a couple more times, then it boots into Vista. I just had an internal drive crash, so I purchased a 1TB and installed it into my 2ghz iMac. Everything went great, and now I am in the midst of reinstalling all my apps. I then partitioned the drive for 53 gigs with Boot Camp and installed Vista 32bit with sp1. And when I boot into the Boot Camp partition, that is the error I get, but then it finally after listing that about 4 or so times boots fine into Vista. I have installed many things now on that partition under Windows and everything seems perfect with it, it is just I get that error.
View 1 Replies View Relatedam not sure if I am posting this in the right category. I am new on here so forgive me if it is not in the right place. I am having trouble with my partition using boot camp. I am getting an error about the files not being able to be moved. I have repaired permissions... did not work. Defragmented.... did not work. When I look at the defrag log I see that there is an error -43 on a jpg, which I can not find. All the other errors are items running that pertain to actually the computer working (quit all files that were opened just to make sure).
View 3 Replies View RelatedMy boot camp do not work "This disc can not be partitioned because it is impossible to move some of its files." What to do? Is there a way to partition mac without boot camp.
Info:
MacBook, Windows XP Pro
In my attempt to install Windows XP via Boot Camp, I accidentally inserted an SP1 disc instead of the SP2 disc that I have. The installation proceeded to the point where it does for most who attempt this: the screen where you are prompted to press ENTER. I could not proceed and therefore restarted the iMac and held down the mouse button upon start-up to remove the CD.
HERE IS THE PROBLEM:I can not boot into OS X because the keyboard shortcuts (those that might allow me to select which partition to boot from and/or reset PRAM) seem to be disabled. Instead, a reboot always ends at a black screen with a blinking DOS-esque cursor, or the prompt: "No bootable device -- insert boot disk and press any key."
I have attempted inserting my SP2 disc at this point, to no avail. My keyboard seems to be disabled, as if the SP1 install proceeded just enough to establish itself as the boot drive without drivers for the keyboard. I've tried using all 3 USB ports, disconnecting other USB devices. Oddly, my bluetooth mouse works to eject the CD on reboot...
"The disk cannot be partitioned because some files cannot be moved. Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again." Does it really mean I have to partition my whole hard drive and then reinstall everything? I'm hoping I'm just misinterpreting....
I have had my uMBP for about two weeks, I boot camped, decided I needed more space for windows, used Winclone to clone my windows partition, merged the windows partition back into OS X, and now I get an error message when I try to repartition. Please tell me there is an easy fix. BTW, my harddrive is 250GB, there is 87GB free, and I am only trying to create an 81GB partition.
I need help about boot camp..I was trying to partition my MBP but it's not working because of an error.
"The disk cannot be partitioned because some files cannot be moved"
Back up disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again"
Can anyone explain to me what to do? I seriously want to have Windows 7 on my mac so I could play Starcraft II much better.
Won't boot up past this screen, this is the first time this has happened. I am fairly certain it is related to an attempt to install SP3 (I had removed it in favor if SP2 to hopefully fix some wireless issues). I noticed when I shut it down last time that it was installing updates, which most certainly included SP3, and then I left the computer. Maybe the install failed? If so, how can I fix this? Any way around other than reverting to a backup? (I think the clone I have of it has SP3 on it)
View 6 Replies View RelatedIn retrospect, I should have ignored it when Apple Software Update told me about the Boot Camp 3.2 upgrade for my 2006 Mac Pro running x64 Win 7 ultimate. When I ran it, it overwrote my blue tooth driver and my keyboard stopped working. Thanks for the folks at Mac Rumors forums, I was able to go through the procedure to get it working again, and I also had to update the video driver (again) from ATI for my 3800.
So then I decide to reboot into MacOS and discover that my icon for selecting the boot disk was gone, not to mention any directory or programs in the start menu. This happen to anyone else? Do I have to downgrade to 3.1 or does anyone have a recommendation to get 3.2 working?
Yesterday when I wanted to boot Vista Ultimate 32-Bits on my 20" iMac (late 2006 model) it only gave me BSODs at startup and then rebooted my computer automatically. I tought: OK, let's just erase Windows. So I fired up Boot Camp-assistent and deleted the Windows partition. Today, I wanted to reinstall Windows Vista again, but when I tried to partition my drive with bootcamp, it gave me the error saying that my harddrive could not be partitioned because some files can't be moved. It says I'll have to format my hardrive to 1 partition using the Drive Utility. But I'm very afraid I do something wrong and that Mac OS can't boot anymore. I also don't have a drive to store a back-up of all my files on. Can I just ignore this screen and if I do, will I be able to start Mac OS X normally? I DO NOT want to install Windows after this anymore, guess I will buy a PC for games in a while or go to my friend's house to play Crysis and such.
View 1 Replies View Related