I made my bootcamp partition small at 16 gb (apparently far too small) since I was just going to use it for a couple of programs. I went to install a game and it looks like windows 7 on it's own is taking up 14 gigs. Is this normal?
View 9 RepliesI'm wondering if anyone could tell me what the normal temperatures are when booting Windows on a Macbook Pro.I'm getting around 60-75 GPU temperature and about 48-60 for CPU when I'm doing normal things like I do in Snow Leopard.Is that okay? Is it also okay to have such temperatures for like 5 hours straight or so?I'm getting around the same temperatures when I'm using Snow Leopard, but the laptop doesn't feels as hot as it feels when I'm using Windows, and that is bugging me much.
View 2 Replies View Relatedlike a number of ppl, I only had a legit XP Pro SP1 and not an SP2 version as required for a seamless Boot Camp install. (Actually I do have a legit SP2 CD but the activation key has been mislaid!... damn). I was looking at going down the somewhat convoluted "slipstream" path to generate a working SP2 build utilising the SP1 key I had but what I have found is that the BootDir registry hack that had been used in the past for SP3 compatibility, also works for SP1 installs. Basically the problem is that the Apple supplied Windows drivers requires the Installer from an SP2 build and the SP2 update fails on a Boot Camp partition without the BootDir hack. So my suggested install method is as follows... ymmv. (Note this has been done with two identical MacBook Pro's with the latest Leopard build). Create the BootCamp partition as per the standard instructions and using your XP Pro SP1 CD going through the usual Windows install dialogs to the point where it want's to restart. I have found that when the Windows tries to shutdown to perform a restart that it hangs. Just hold down the power button on the Mac to force a shutdown leaving a minute or so just in case Windows is being slow. Boot back to Windows (via standard Boot Camp Option button) and perform the registry hack as published elsewhere for SP3 updates. Basically it is adding a key 'BootDir' with a value of 'C:' to HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionSetup
Note that you need to be able to right click on the mouse in regedit to create this key and at this point without the Apple drivers installed I don't think trackpad supports this so I have used a generic two button USB mouse. Once this registry entry is added you can install the SP2 update (as downloaded from Microsoft - WindowsXP-KB835935-SP2-ENU.exe). Once again I have found that Windows still hangs after the SP2 install restart until the Apple updates are applied... so nail the power button again after a pause or two. Once you are back to Windows again you can now install the Apple drivers found on the Disk 1 of you Leopard CD although I would recommend downloading the latest v2.1 from Apple if not. (Note there is a minor update to v2.1.1 available through the Apple Software Installation program). I am not sure if you could go direct to SP3 using this method but I have tended to stick with SP2 as SP3 tends to slow bootup/shutdown. Most Mac users would use FireFox/Safari in preference to IE so you have already improved the security of XP
I am currently on a macbook that I bought in the summer of 2008, and I just decided I wanted to be able to run Windows on my laptop. I found my WindowsXP installation disk, a factory disk, and opened up boot camp to install Windows. I was following instructions from another thread on another computer I have at home. I got through partitioning my disk and got the windowsXP installation ready to begin when I realized I couldn't find my MacOSX disk, and thus wouldn't be able to install the Windows drivers after installing Windows (I was running Mac OS X 10.5.8), so I stopped the installation there and un-partitioned my harddrive. I then ordered Mac OS X Snow Leopard 10.6.3, and I just received the CD today. I installed Snow Leopard, then did the same thing that I did before with boot camp and partitioned my drive. However, this time when I got to the part where I put in my Windows disk, the computer reboots and starts, but the Windows installation won't begin. It just sits at a black screen with a blinking cursor in the top left corner. I've tried giving it over 30 minutes to start but it just won't go. Logically I would assume there's a problem with the disk, but I used this same disk less than a week ago and got halfway through the installation without any problems. Why won't my WindowsXP installer disk boot up?
View 1 Replies View RelatedI just updated my (2006 Intel Core 2 Duo 2.16 GHz 15") MacBookPro to Leopard 10.5.6 I installed Windows XP SP3 through bootcamp, and everything was fine, but after i was done installing the BootCamp drivers from the Leopard disk and I restarted the computer,and booted back into windows, it would load to windows show my desktop for about 5 seconds then reboot itself (no error messages). So I mounted the windows partition again, same thing, over and over, I must have done it 20 times.I even tried doing the bootcamp 2.1 update and it didn't work. So i restored windows to the previous working settings and the bootcamp drivers were gone. So Windows works now but i am not abled to use the wifi or any multi touch or anything. I have also deleted the Windows partition and reinstalled it from the beginning and the same thing happened after installing the bootcamp drivers.
View 5 Replies View RelatedI have a 1st generation macbook pro running snow leopard 10.6. I've been trying to install windows xp, vista, or 7 using bootcamp but for some odd reason i cannot boot into the cd. I put the cd in and made sure the macbook is reading it (which it is because the icon shows up on the desktop) before i hit "start installation". the laptop would restart but it doesnt boot into the cd, it just goes right into the gray screen and stays there while i hear the cd spinning. I've installed windows xp using this method but that was about 4 years ago, for some reason the hard drive died on me so i have to do this whole process over again. I dont recall having this problem either.
View 3 Replies View RelatedI'm having problems with a Boot Camp partition and XP Professional SP2.
I setup a 20GB partition on my drive (I'm using a MacBook Pro, 3GB, 120GB hard drive). It's the only partition other than the one I use for OS X.
I didn't have full-install SP2 discs, only an upgrade. So I went to Fry's and bought a legal, new OEM disc and license for XP Professional SP2, full-install. I ran the installer and all went well...until I rebooted. At that point, Windows wouldn't load giving me a non-system disc error.
Followed this guide [URL] and everything went smoothely, except when I came to step 24 I dont see the icon in the system tray. Also tried to run the program in the boot camp folder, but nothing happens. No big deal I think, but would be nice to have everything work properly.
View 1 Replies View RelatedI just recently purchased a 13" MBP Unibody and I'm thinking about installing Windows 7 (64-Bit) on it. If I install Windows with Boot Camp, and then install Parallels, do I need to make another Windows partition, or will it use the partition created in Boot Camp? Should I install Windows using Boot Camp first and then Parallels, or the other way around?
View 7 Replies View RelatedI'm trying to install windows xp professional sp3 from an iso I torrented. I burned it to a disc, but my computer can't find the disc during the start of installation ("No bootable device, press any key").
View 1 Replies View RelatedI did a problem free install of Win-doze xp pro sp.2 via Boot Camp and all was well, everything went off without a hitch... However I only partitioned 35 GB for Win-doze which after some thought I realized that having installed windoze for the sole purpose of playing games (which require alot of space) Anyway, I played a few games like "Crysis" and "The Last Remnant" both worked fantastically but I didn't want to get too far in them just to have to re-do the boot camp later and lose the data, so I went ahead and uninstalled the windoze partition and proceeded to go through the motions again, However this time around I set aside a 200GB partition. For some reason everything seemed to take MUCH longer, or instance it sat on the "restarting computer..." screen for 5-10 minutes, finally restarted then windoze loaded and went to the collecting information;Dynamic update;preparing installation;installing windoze
View 4 Replies View RelatedI am trying to install Win 7 through Boot Camp, everytime it gets to installing at 1% I get an error message. Windows cannot installed required files. Files missing or Corrupt 0x80070570. What I've tried:
- Using 32 Bit instead of 64 Bit Windows
- Burning both at low speeds (Disk Utilities and IMGBurn)
- Tried installing XP then doing an upgrade to Win 7, but only have XP Upgrade and eject key doesn't work during installation when prompted for older version verification.
Anyone experinced or heard of this before?
i recently decided to install Windows XP on my macbook. I was wondering though how many gigs should i allot to windows using bootcamp? Also can i run ALL windows programs on it? because i was thinking of installing battlefield 2 on the windows os.
View 4 Replies View RelatedI've got my MSDN W7x64 Ultimate DVD burned, and when I reboot to install it (after using Boot Camp Assistant) it always hangs and never brings up the graphical installation screen. I tried Safe Mode, only to see that it stops after disk.sys loads. Anyone else having this issue or found a way to fix it?
View 2 Replies View RelatedIn retrospect, I should have ignored it when Apple Software Update told me about the Boot Camp 3.2 upgrade for my 2006 Mac Pro running x64 Win 7 ultimate. When I ran it, it overwrote my blue tooth driver and my keyboard stopped working. Thanks for the folks at Mac Rumors forums, I was able to go through the procedure to get it working again, and I also had to update the video driver (again) from ATI for my 3800.
So then I decide to reboot into MacOS and discover that my icon for selecting the boot disk was gone, not to mention any directory or programs in the start menu. This happen to anyone else? Do I have to downgrade to 3.1 or does anyone have a recommendation to get 3.2 working?
So my old 15" early 2006 Macbook Pro (1,1) no loger recognizes the primary display. I can use an external monitor just fine, but when I go into System Profiler, it's like my primary display disappeared. I reinstalled Snow Leopard, reset PRAM, NVRAM, repaired my permissions, tried to update my mac, but litterally nothing I have tried has worked.
It started when I tried to install both Windows 7 and Ubuntu. After completing the Windows 7 installation, I restarted my computer and it just hung on the Apple logo. I could feel the fans begining to spin really fast and it felt like my laptop was on fire. I restarted my computer, let it cool down, and it hung at the Apple logo again. I rebooted it a final time, and nothing. Black screen. No backlight or image...nothing.
Info:
MacBook Pro 15 inch, Mac OS X (10.4.7)
Trying to install Windows XP via Boot Camp, I get this error:
I have an external hard drive with enough space to back up my computer, but I don't know what to do after that. Can someone tell me what to back it up with so I can restore it after I format my computer, and how to restore it?
I assume to format the drive I use Disk Utility from my install CD?
how to make a boot camp installation with three partitions?
I mean one for mac, one for windows and one for data to be shared between the OS's? When I try to create 3 partitions on leopard installation, when I start the boot camp assistant, it doesn't work. Or when I create an extra partition inside windows, mac is not able to see it.
I have one program that I will have to run in boot camp. The rest of the time, I would like to run in Parallels. Will I have to install XP twice to do this and thus take up more hard drive?
View 2 Replies View RelatedI'm trying to put Window XP with bootcamp,
the CD is a bit long to load for the installation it's normal?
I am trying to follow the following guide to do a triple boot, but I am stuck in Windows 7 installation
triple boot snow leopard, windows 7, & ubuntu
I have done the following:
1. Did a clean installation of OS X Snow Leopard on hard drive (Not yet partitioned the hard drive)
2. Installed rEFIt
I am not sure what the poster means by making sure it works by pressing the option button. I am assuming it means that I will be able to see the options I can choose when I press option? (I do see options to pick either "Hard Drive" or whatever disc in the DVD)
3. Partitioned 30 GB (or was it 40 GB? x.x I forgot sorry) space in Boot Camp Assistant for Windows installation. Chose the option to install Windows later.
4. Inserted OS X Snow Leopard installation disc and boot from there.
5. Opened up the Disk Utility and partitioned a hard drive (called Hard Drive_2) via the Partition section as instructed by the guide. Formatted in MAc OS Extended (Journaled)
So now, in that area I see "Hard Drive", "Hard Drive_2" and "BOOT CAMP" (so I am assuming that is what the poster meant by "3 partitions".
6. Restarted the computer with Windows installation disc.
Problems occur right here:
Problem 1: I do not see anything called "C something" as the poster said. But I do see something called "Boot Camp"
Problem 2: All the partitions that are available says that "Windows 7 can't be installed". So my question is am I supposed to "delete" a specific partition to install it?
I have pictures of the screen which I will upload later if this isn't clear enough.
In my attempt to install Windows XP via Boot Camp, I accidentally inserted an SP1 disc instead of the SP2 disc that I have. The installation proceeded to the point where it does for most who attempt this: the screen where you are prompted to press ENTER. I could not proceed and therefore restarted the iMac and held down the mouse button upon start-up to remove the CD.
HERE IS THE PROBLEM:I can not boot into OS X because the keyboard shortcuts (those that might allow me to select which partition to boot from and/or reset PRAM) seem to be disabled. Instead, a reboot always ends at a black screen with a blinking DOS-esque cursor, or the prompt: "No bootable device -- insert boot disk and press any key."
I have attempted inserting my SP2 disc at this point, to no avail. My keyboard seems to be disabled, as if the SP1 install proceeded just enough to establish itself as the boot drive without drivers for the keyboard. I've tried using all 3 USB ports, disconnecting other USB devices. Oddly, my bluetooth mouse works to eject the CD on reboot...
I've installed and reinstalled xp and vista on bootcamp. I've uninstalled and reinstalled drivers. The forums don't help either.
The drivers are all recognized. The only sounds I hear are the noise when windows boots up, and a clicking noise when I mute or unmute the computer. Nothing else. Anybody have any suggestions? Please help
I have an '08 Octo 2.8.
I created a Boot Camp Partition (an entire drive, actually) and installed XP. The install went off without a hitch ... Except, having rebooted to Mac OS X (10.6.1) there is no way to boot Windows again. Going to Preferences->Boot Disk shows no Book Camp bootable drive.
I used Boot Camp to install Win 7 x64 on a partition, and I got the OS and the drivers to work just fine. (I also have it installed on a Parallels Virutal machine, but I needed the dedicated partition for work.)
My only problem is that when I boot into Win 7, I get a screen that has a cursor flashing for about 2 and a half minutes. After that time, the Windows logo appears and it boots just fine. Is this common, or am I missing something here? It behooves me that it takes around 3 to 3 and a half minutes for Win 7 to boot up after hitting the power button.
Anyone have a fix? Sound is waaaay too low.
View 2 Replies View Relatednot sure if this is the right place to post it but is there a substitute for boot camp on windows? i dont want vmware cuz it shows the os in a box i want it to show a full os without borders n able to partition hard drive
View 22 Replies View RelatedI installed Windows 7 on a MacBook Pro trough boot camp and need drivers. Mac OS X version is 10.5.8(Leopard) and I dont have the Mac OS X installation disc, so my question is is there any whay i can download the boot camp.
Info:
MacBook Pro, Mac OS X (10.5.8)
This is the 1st time i got a Mac , i bought a black Macbook 2.4GHz some days ago .
I installed Windows Vista Ultimate using Boot Camp , and all went smoothly .
Only 1 prob is when restarting , i have to wait too long for the Windows to log on , i think about 1min with the black screen.
And if i want to boot in Mac OS , i have to push down the D button or the Alt, it takes quite a long time too .
So do you guys have any solution to this problem ? I want to get rid of the waiting time, way too much.
And do you know how to make my Macbook jump right in the choosing section when it starts ? ( so that i dont have to push down any button when it starts )
After my other thread and a bit more research I have decided that Boot camp will suit my needs the best.My next question, which Version of Windows will work the best on the MBA. I know 100% that it won't be Vista. But cant decide between Win XP or Win 7.
View 14 Replies View Related