OS X :: Tried Installing XP With Boot Camp And Got Disk Error?
Jan 9, 2010
I'm a new MAC user and would need to install XP on my MAC. I'm sure there are thousands of threads out there about this but I couldn't find one. I've tried installing with Boot Camp and got Disk Error. Realised I had Service Pack One. The CPU then wouldn't boot properly as it looked for the WIN CD later so I have to hold down the Option key every time I boot up. I now have XP Pro with SP3 and have partitioned the space (20gb). Just don't want to mess it up so I'll wait for a reply here.
I have been trying to install Windows XP Pro SP3 on my MacBook, and after the installation finishes, I get an error saying that hal.dll can't be found. Really strange. Windows 7 installs fine, but I'd like to install XP for nostalgia's sake.
The disc is clean and I get no errors during install.
On my new MBP, I had Tiger and Boot Camp 1.4 Beta.
When I got my Leopard UTD disc, I simply did an upgrade. Last night, I was fed up with some of the weirdness, and decided to start with a clean slate.
I removed my windows/boot camp partition, popped in my Leopard disc, selected erase and Install, and within 30 minutes it was done (seems way too fast...wtf?)
Anyway, I go through the Boot Camp steps to install Windows. When I get to the Windows setup where you select a drive to install, it doesn't give me the option to format the Boot Camp C: drive, but instead just installs.
After rebooting, it gives me a DISK ERROR.
A bit of googling shows others have had this problem, too. Is EVERYONE having this problem? Did Apple break Boot Camp with Leopard?
Is there any viable workout other than formatting to Tiger, installing 1.4, then upgrading again?
Is it possible to uninstall the Boot Camp assistant on Leopard and find/download/install Boot Camp 1.4 on Leopard, and go from there?
I need windows for school - and this is driving me nuts!
I need help about boot camp..I was trying to partition my MBP but it's not working because of an error.
"The disk cannot be partitioned because some files cannot be moved" Back up disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again"
Can anyone explain to me what to do? I seriously want to have Windows 7 on my mac so I could play Starcraft II much better.
I just finished up a fresh install of Windows 7 and downloaded and installed the NVidia driver from their site directly since the one in the Boot Camp files is pretty old and technically the Vista driver anyway.
But I still need the Brightness, Sound, etc key functionality. Is there a way to selectively install Boot Camp drivers? That's the only one I need. The wireless, chipset, video and everything else works just fine (and in some cases better) than the ones included in Apple's setup.
This is the 1st time i got a Mac , i bought a black Macbook 2.4GHz some days ago .
I installed Windows Vista Ultimate using Boot Camp , and all went smoothly .
Only 1 prob is when restarting , i have to wait too long for the Windows to log on , i think about 1min with the black screen.
And if i want to boot in Mac OS , i have to push down the D button or the Alt, it takes quite a long time too .
So do you guys have any solution to this problem ? I want to get rid of the waiting time, way too much.
And do you know how to make my Macbook jump right in the choosing section when it starts ? ( so that i dont have to push down any button when it starts )
I am having problems trying to install Windows 7 through Boot Camp. I have already deleted my old Win XP. I get to the step in Boot Camp when it asks me to enter the Win OS CD into the computer, than click continue or w/e, and it says no CD found. It's not a problem w/ my CD/DVD reader cause it appears on my comp that I have CD in. I have already updated my mac for all firmware and OS updates. I am using MacBook Pro 2009, BootCamp version 2.0, and Windows 7.
I am going to purchase leopard and I was wondering the limits of the Xp installation. I bought a XP computer last year and it came with a recovery CD. Could I use the recovery cd to load XP or would I have to go out and buy a new version of Windows XP S2P. And one other question with running windows on a mac, would I still catch viruses using the windows OS or would the Mac side kick in and block them. Then if it doesnt then I would have to buy an anitvirus.
if i run the boot camp setup in win 7, it says my laptop doesn't support x64.
if i install the .msi it says i don't have the elevated privileges to do it.
if check the properties of the .msi the option to run the program as an administrator is grayed out
if i change the user account settings to eliminate the prompt to run as admin and then reboot, i still cannot open the damn installer because it says i need the priviliges.
I have just got a new 15" MBP (2009/2010) and installed XP with boot camp. I have done this before on my MacBook White and iMac and had no problems but this time it has been a real pain in the neck. When I put in the MBP install DVD after installing XP I found it had no Boot camp exe or drivers? I got around this by using the DVD that came with my MacBook White which had Boot Camp and 99% of the drivers that I needed. The only problem I am having now is with the isight,Bluetooth and WLAN drivers, Does anyone know where I can get them?
I know with Boot Camp, you need to create a partition and install Windows on it. Is the same true with Fusion? Or during the install process, Fusion will create the space needed?
I want to replace the hard drive in my iMac (2009 i5 model) but I'm not sure how I can copy my Boot Camp partition over. I had a difficult time trying to installing Windows 7 on my computer the first time I did it, I had to slip in extra drivers and remove ram sticks and stuff like that but once I got it running it has ran fine without any problems. I skimmed through the SSD upgrade thread looking for info but I didn't see anything that jumped out at me. When I google'd the issue, almost all of the info I found was from 2009 and older. So, what is the best way to copy a Boot Camp partition to a new hard disk?
Alright, so I've installed Windows 7 RC on my iMac with Boot Camp. Booting straight into Win everything works fine (I had some issues trying to connect my Wireless Keyboard and Mouse, but it's fine now). I have 3 issues:
1. Firstly, is there any way for me to access my files stored on the Mac partition in Windows (e.g. Music, Videos etc.)? I tried using HFS+ Explorer but it I get stuck at the 'AutoDetect Partition' phase because it says "No HFS+ Partition found". Any ideas?
2. Now I've also got VMWare Fusion running on my Mac, and when I start it, it detects my Windows partition and so I load Windows through it. The OS loads up fine, but for some reason it doesn't detect my WiFi adapter and so the Internet in Windows doesn't work (it works fine via Boot Camp). Is this normal (since maybe the WiFi is already connected through OS X so won't work in Windows at the same time)?
3. Lastly, I've installed the VMWare Tools in Windows, and it seemed to go on without a problem, but for some reason my 'Unity' option doesn't work. The button is there, but when I click it the Win7 window disappears. I figured, OK, probably just loading or something, but nothing happens. The VMWare main screen still shows that Windows is 'Powered On'.
So, I have a mid 2008 24" iMac (the one with the black plastic backing) with all the possible hardware upgrades available at the time. I recently upgraded Leopard to Snow Leopard, which went great, except it messed up Vista. So i deleted the partition and started over, only with 64 bit Win 7 (with a disc i bought from MS). Boot Camp 3.0 installed it just fine, except now that I'm running Win 7, Boot Camp is no where to be found so I can't access Snow Leopard in any way. I pop in the Snow Leopard disc and it simply says my computer model does not support x64 boot camp.
I installed Windows 8 with Boot Camp Assistant however I couldn't boot into OS X anymore. I get a prohibited sign on boot. If I press Command+V on boot it says "Error loading kernel cache (0xe)". Windows 8 can still boot without problem.
Info: MacBook Pro (Retina, 13-inch, Mid 2014), OS X Yosemite (10.10.1)
Trying to install Windows XP via Boot Camp, I get this error:
I have an external hard drive with enough space to back up my computer, but I don't know what to do after that. Can someone tell me what to back it up with so I can restore it after I format my computer, and how to restore it?
I assume to format the drive I use Disk Utility from my install CD?
I recently purcahsed an Apple Magic Mouse to use with my MacBook Pro. I was able successfully pair and configure the Magic Mouse on the Mac OS X side, as well as use it on the Windows 7 partition through Parallels. However, when I try to use the Magic Mouse on the Windows side through Boot Camp, it doesn't work. When I select the option to add a new Bluetooth device in Windows, the Magic Mouse is not found, therefore, cannot be set up. I believe I have the most recent version of Boot Camp (3.1). The Windows OS has been completely updated as well.
Has anyone run into this problem? If so, is there a solution for it?
I know this question has probably been answered somewhere, but I can't seem to find anything quite like my situation.
I'm resizing the Windows partition on a 2.2GHz 15" Macbook Pro. I deleted the partition using Boot Camp, but when I went back to repartition it, I get the error that states:
"The disk cannot be partitioned because some files cannot be moved. - Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume ..."
However, according to Disk Utility, there's only one partition on the drive, and it's correctly formatted. I'm not missing any hard drive space or anything. Is there any way to fix this without going through the hassle of reformatting my hard drive?
I have a small problem. My mac pro (2007) was broken about two weeks ago. Now I have it back but I have a new problem (probably caused by updates by apple). I always used dual boot with windows 7 64 bit, but now it just won't install it anymore.
I use my first HD (320GB) for my 2 os (so snow leopard has 200GB and windows has 100GB). Just like I always did, but now I gives 2 errors:
1. After creating a partition with boot camp, the windows installer says that he cannot install on that partition because he needs NTFS (and it's FAT32).
I've got a 2010 i7 15.4 MBP, after installing boot camp drivers from MAC OS DVD, I could not find any option about how long to dim screen brightness. However, my friend's 13.3 MBP does have. What about yours, guys?
When i boot into Vista at the boot ing Windows Vista black screen, i get an error message that says... Warning: unrecognized partition table for drive 80. please rebuild it using a Microsoft-compatible FDISK tool(err=4) System tyhpe is NTFS, partition type 0x7 then it goes, and lists that a couple more times, then it boots into Vista. I just had an internal drive crash, so I purchased a 1TB and installed it into my 2ghz iMac. Everything went great, and now I am in the midst of reinstalling all my apps. I then partitioned the drive for 53 gigs with Boot Camp and installed Vista 32bit with sp1. And when I boot into the Boot Camp partition, that is the error I get, but then it finally after listing that about 4 or so times boots fine into Vista. I have installed many things now on that partition under Windows and everything seems perfect with it, it is just I get that error.
am not sure if I am posting this in the right category. I am new on here so forgive me if it is not in the right place. I am having trouble with my partition using boot camp. I am getting an error about the files not being able to be moved. I have repaired permissions... did not work. Defragmented.... did not work. When I look at the defrag log I see that there is an error -43 on a jpg, which I can not find. All the other errors are items running that pertain to actually the computer working (quit all files that were opened just to make sure).
My boot camp do not work "This disc can not be partitioned because it is impossible to move some of its files." What to do? Is there a way to partition mac without boot camp.
In my attempt to install Windows XP via Boot Camp, I accidentally inserted an SP1 disc instead of the SP2 disc that I have. The installation proceeded to the point where it does for most who attempt this: the screen where you are prompted to press ENTER. I could not proceed and therefore restarted the iMac and held down the mouse button upon start-up to remove the CD.
HERE IS THE PROBLEM:I can not boot into OS X because the keyboard shortcuts (those that might allow me to select which partition to boot from and/or reset PRAM) seem to be disabled. Instead, a reboot always ends at a black screen with a blinking DOS-esque cursor, or the prompt: "No bootable device -- insert boot disk and press any key."
I have attempted inserting my SP2 disc at this point, to no avail. My keyboard seems to be disabled, as if the SP1 install proceeded just enough to establish itself as the boot drive without drivers for the keyboard. I've tried using all 3 USB ports, disconnecting other USB devices. Oddly, my bluetooth mouse works to eject the CD on reboot...
I am running Leopard on a 1st gen macbook. I used boot camp assistant to partition the disk, and then went to install windows. I didn't back up bc I am an ass. Then I got to the part where I had to choose a partition. I reformatted the Boot Camp partition to NTFS. I then realized that the partition is too small. I have to get back into Leopard to fix the partition problem. Now, I can't reboot to Leopard. Holding alt or the apple key or both does not prevent the windows dvd from booting. When I eject the DVD, it tells me "no bootable disk." I never installed Vista. I don't understand how I could have overwritten anything or caused any data loss.
I keep getting this error..."The disk cannot be partitioned because some files cannot be moved. Back up disk use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again."So I've checked and my HD is already a Mac OS Extended (Journaled) volume. I've gone to Disk Utility and verified the HD, verified permissions, and repaired permissions. I don't know what else to do. I don't want to backup the entire drive and format it.
I'm having problems with a Boot Camp partition and XP Professional SP2.
I setup a 20GB partition on my drive (I'm using a MacBook Pro, 3GB, 120GB hard drive). It's the only partition other than the one I use for OS X.
I didn't have full-install SP2 discs, only an upgrade. So I went to Fry's and bought a legal, new OEM disc and license for XP Professional SP2, full-install. I ran the installer and all went well...until I rebooted. At that point, Windows wouldn't load giving me a non-system disc error.
"The disk cannot be partitioned because some files cannot be moved. Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again." Does it really mean I have to partition my whole hard drive and then reinstall everything? I'm hoping I'm just misinterpreting....
I have had my uMBP for about two weeks, I boot camped, decided I needed more space for windows, used Winclone to clone my windows partition, merged the windows partition back into OS X, and now I get an error message when I try to repartition. Please tell me there is an easy fix. BTW, my harddrive is 250GB, there is 87GB free, and I am only trying to create an 81GB partition.
