OS X :: Best And Cheapest HD To Backup?
May 18, 2010Everything on my mac? Like whats the best hard drive but also pretty cheap?
View 4 RepliesEverything on my mac? Like whats the best hard drive but also pretty cheap?
View 4 RepliesI am trying to make a video wall of 4 - 6 lcd panels, all displaying different lo-fi videos. Ideally I would like to have one computer driving all of the panels. But I don't know what hardware / software i need to connect more than 2 monitors.
View 11 Replies View RelatedSo yeah I need 2 gigs of ram for my eMac 1.42ghz model. I found this but I don't know if there is anywhere to get it for less $.
http://eshop.macsales.com/item/Other...g/2700DDR1024/
Anyone know where I can find the cheapest SSD's for a uMBP?I've already look around and the prices are ridiculous!
View 22 Replies View RelatedI will be buying a MacBook pro when the new ones come out. This will be my first mac. I would like to know whether it's a good idea to purchase the cheapest 15 inch MBP and upgrade it as it's needed. I will be using it mainly to watch movies, surf Internet, email and occasional movie maker. Is this a good route to take? Is it difficult to change components on a MBP?
View 20 Replies View RelatedI have a mini and a 23 cinema. Basically I want more real estate and want to run a second cinema. Can a power mac g5 handle it? I've seen him go for like 500 dollars on ebay. I use the computer for research and office.
View 1 Replies View RelatedWhat is the least expensive computer option if I was looking for a system that is capable of running Final Cut Pro?
View 6 Replies View RelatedI have a late model G5 Quad 2.5 Ghz that I'm trying to sell.The video card is dead and causing all sorts of kernel panics.So, I'm trying to replace the card with the cheapest one I can find, so I can sell the machine.I found this one on ebay:[URL]It says it will work with the G5 Tower 8x AGP, but I don't know if thats mine or not.
Do you guys know if that will work in my machine?
Recently broke my monitor and need to find a cheap replacement asap. I know that you need something that has the right adaptor to plug in but it doesn't really matter if it's apple, acer, etc. My question is does anyone know of a cheap monitor for the time being that has the right adaptor for the powerman g5?
View 5 Replies View RelatedI recently bought a used Emac G4 and I have a router downstairs but now I need to know how to get a wireless signal in my room. Here are the specs:
700mhz G4 processor, 40gb harddrive, DVD ReaderCombo drive, 17 inch screen, internal 56k modem, ethernet port, built-in speakers, 2 Firewire ports, 3 USB ports, external speaker & mic connections, and video output for an external monitor. fresh installation of OS X 10.1. Also I plan to update to tiger (get an update off ebay). Will the computer handle it well? I'm eventually going to upgrade to 1gb of RAM.
I have found disks that say "media only" for really cheap and I realize those aren't licenses but since the eMac has Tiger wouldn't it already have an OSX license? Links to products would be nice if possible.
View 10 Replies View RelatedWith some minor exceptions, primarily for game playing for a few years in the late 90s, I haven't used Windows, well, basically ever (ok, I used DOS some until the mid-90s), mostly using various forms of Unix/Linux and Mac OS X. I have never purchased a Microsoft product directly (I've obtained licenses indirectly though).
View 10 Replies View Relatedjust got my air 11.6 cheapest version. I was playing tf2 under Os X and the performance is just a tiny bit too low for good playing, i feel like a tiny overclock of the 1.4 ghz cpu would greatly help. Considering the core 2 duo is a very mature cpu, and that the laptop doesnt seem to heat that much, it might just work. Of course Im talking about even just a lil oc to 1.6ghz.
View 2 Replies View Relatedbest/cheapest place to buy the correct airport card to fit into my 2008 Mac Pro please? Im in the UK but if it works out a lot cheaper ordering elsewhere then I don't mind.
View 17 Replies View RelatedI am getting the following error from Time Machine when doing my first backup. The startup disk being backed up, and the TM disk are both the same size.
Macintosh HD: 465.44 (total); 393.99 (free); 71.45 (free)
Time Machine: 465.44 (total); 465.29 (free)
The Time Machine error is: Quote:
"This backup is too large for the backup volume. The backup requires 472.7 GB but only 465.3 GB are available." why would this be? Other disks are excluded from the backup, and Time Machine is telling me that it needs more space than it actually needs. What should I do?
I was a PC user who recently moved to mac. I have a macbook (intel 2.2GHz, 2GB RAM, 250GB HDD). When I was using PC, I backed up all my data to a network storage device (Buffalo LinkStation 250 GB connected to a 802.11g netgear router which is supplied by Sky) using a program called SmartSync Pro, which worked very well. Although I can connect to and mount the Share folder on this drive when the macbook is connected to the network, Time Machine will not back up to it. It wouldnt even recognise the disk on the network.
So I went onto the trusty internet, and found that you can get time machine to recognise the Share folder. (This was obtained from: http://blog.imulus.com/george/software/using-leopard-time-machine-to-backup-of-a-network/)See my comment on their page at the bottom, number 66.
It recommended entering the following in to the Terminal: defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1
Before attempting backup I have to go into "Network" and select the Share folder by double clicking on it. This seems to mount the volume. After this, it can be seen in Time Machine as a potential backup destination.
However, this method does not work for me. Time Machine "prepares" for a while, then gives the following message: Time Machine error. The backup disk image could not be created.
More internet searching took me to macosxhints which suggests creating something called a sparsebundle image on my local system. (http://www.macosxhints.com/article.php?story=20080420211034137) Have not tried this yet as I thought it would be prudent to seek some help first.
Apple have deliberately disabled the ability for Time Machine to back up to network attached storage, (except of course to their proprietory Time Capsule):
Is this because time machine requires a network faster than 802.11g?
Is this because a time machine backup to a network attached storage device is unreliable and the data is corrupted?
I dont want to shell out more cash for a time capsule. I would prefer not to have to hardwire to an external drive (which I will also have to go out and buy). Any thoughts?
I just purchased a Seagate 3 TB USB 2.0/3.0 external drive to use as my time machine backup drive. I have a MacBook Pro that was purchased about 3-4 years ago. The MacBook Pro has a 120 GB hard drive and is currently running MAC OSx 10.6.8. I also have another WD 1 TB FireWire external drive that I use to store all of my media files.
After I followed the instructions for installing the new Seagate drive for use with the MAC OSx, I initiated a time machine backup. It very quickly determined that it needed to back up almost 900,000 files totaling just about 400 GB. It started the backup process at a rate of about 1 GB per minute. In a little less than an hour it reach 53 GB and remained there for an additional two hours before I decided to stop the backup.
Once I got the backup stopped, I deleted the backup and decided to look at my energy saving settings. I noticed that the "Put drives to sleep whenever possible" check box was checked, so I unchecked that option and restarted the MAC. I then initiated the time machine backup again. Like the first time it quickly determined that it needed to backup the same amount of data as before and started the backup process at a rate of about 1 GB per minute. Before going to bed at around 11 PM last night it was at about 60 GB so I thought I was out of the woods (having gotten further than the 53 GB earlier). When I woke up this morning at 5:30 AM it was sitting at 69 GB.
I am really frustrated at this point and don't know why the time machine back up would be failing on a brand new hard drive. PS - I was previously using a Seagate 1.5 TB USB drive as my time machine backup and never had any issues with it. I decided to use the 1.5 TB drive for a different purpose, which is why I have the new 3 TB drive to use as a backup. And I still have the full backup on the 1.5 TB drive just in case anything were to go awry.
Info:
MacBook Pro, Mac OS X (10.6.8)
When i try to backup data or transfer large amounts of data, like 40gb or more, between drives, the process just stops without warning or explanation. It dowsn't matter when backup i use, Time Machine or WD Smartware.
Info:
iMac, Mac OS X (10.7.3)
I have a external HD which has always worked fine under snow leopard. Since upgrading to lion I keep getting the following message The identity of the backup disk has changed since the previous backup.The disk may have been replaced or erased, or someone may be trying to trick your computer into backing up to the wrong disk. And after this the drive disappears from the desktop appearing agian only after restart. What can I do do rectify this? Delete and re-intialise the drive?
Info:
MacProQuad2.6 4gbRam, Mac OS X (10.4.8)
TIME MACHINE ERROR:Unable to complete backup, An error occurred while creating the backup folder.
Info:
iMac, Mac OS X (10.7.4)
Just wanted to check if he problem was unique to my MBA (Rev B, HDD) or you notice it too ;
My Time Machine backup takes up to 6 hours to do a backup of about 30GB. And each backup size is 31.5GB everytime !!
I have the following Config - 80 GB for OSX (53GB Free) and 40 GB (10GB Free) for Win 7 on Bootcamp. Sometimes I wonder if TM making a backup of Win 7 also everytime. (Does it mean - In a way its good, that means I should be able to restore the entire hard disk from TM including Applications, Win 7 , bootcamp and all the programmes installed in Win 7 in case I have a problem ?)
But the speed should still be fast... 6 hours to do a 32GB backup is torturous specially because then I have to leave the machine alone and cannot use it.
Is there a way to make a backup of your Time Machine backup on a 2nd hard drive? I want to be doubly sure that my data is backed up!Right now I get an error saying that the second hard drive isn't authorized to copy my Time Machine data from the original hard drive I have set up as my Time Machine.
Info:
iMac, Mac OS X (10.7.3)
Running OS X 10.8.5
Trying to backup to Passport Time machine. Has worked fine until a few days ago.
I just replaced the stock 160GB HD in my unibody macbook with a WD Blue Scorpio 640GB HD. I used Super Duper to clone the old drive to the new one, approximately 115 GB.
Now Time Machine wants to backup the full 115GB to my Time Capsule, which kinda sucks because it's going to be a redundent backup that's gonna take up over a 10th of my TC's space. Is there any way to avoid this and still use Time Machine?
I have a 1tb external for time machine back up and have about 750 gb of stuff to back up. I was under the impression that when time machine backs up my stuff it will automatically delete the oldest backup to create room for the newer backup.
My problem is that i did a back up a couple weeks ago and then today i go to back up and it tells me back up failed only 718gb available for 740gb of stuff to back up
anyone have this problem? how can i fix it?
I just sold my iMac (described in sig) and need to backup my stuff to an external drive. What (free) program would allow me to backup my user name without having to manually drag everything over? Migration Assistant won't work as there will be a few days where I have no computer. Also I don't want to back up the OS itself; just my home folders (Pictures Music Movies etc.) and some applications.
View 8 Replies View RelatedWell TM is acting up. I get an error that reads: "This backup is too large for the backup volume."
Both the internal boot disk and the external baclup drive are 1TB. The internal one has a two partitions, the OSX one that is 900GBs and a 32GB NTFS one for Boot Camp. The external drive is a single OSX Extended part. that is 932GBs.
Both the Time Machine disk, and the Boot Camp disk are excluded from the backup along with a "Crap" folder for temporary large files.
Time Machine says it needs 938GBs to backup only the OSX disk, which has 806GBs in use with the rest free. WTFFF?
This happened after moving a large folder (128GB in total) from the root of the OSX disk over to my Home Folder.
I have reformated the Time Machine drive and have no backups at all of my data and it refuses to backup!!
Why would it need 938GBs of space to backup if the disk has "only" 806 GBs in use??? Is there anyway to reset Time Machine completely???
Some quick screenshots:
my TM wil not back up! It states that this backup is too large for the backup disk. The back up disk requires 573.50 GB but only 225.23 GB are available. The TM needs work space on the backup disk, in addition to the space required to store backups. Upen TM perferences to select a LARGER backup disk or make the backup smaller by excluding file.
Okay I;m sorry but obvioulsy I dont get this. I've never called Apple for help! I have every product they sell practically including Protection Plans I never used and no one will help me with this. My MAC is starting to have black or white screens and i can hear it running but it will not do anything so i have to reboot it, it screws up Enturage and then I have to rebuild that ( 5 times this year) anyway... I would like to back everything up- can I delete everything on the Time Capsule or Time Machine; god I dont even know what it is called Im so MAD... help if you can please. I'm going to have to take this to the genius people at the store and probably buy another computer but like before they will not save my files.
Info:
Mac OS X (10.7.3), time cap or Time Machine
There are 3 macs:
A: an old macbook (the white one)
B: a modern macbook pro (retina)
C: another modern macbook pro (TBD)
I am giving away B now; I expect to get C in 2 months time; I keep A with me all the time.
The goal is to migrate all of the data from B to C. I have Time Machine backups of B.
Since the transition is a long time (2 months), I need to keep working on my data during this period. For this I will use A. This will generate new files, modify old ones, ...
Since A's HDD is much smaller than B's backup, I can move only part of them.
By the way, I have totally erased A and used migration assistant to restore part of my old data from B. So, when I use A now, I do it with my same account as in B (and the same I will use in C).
How do I manage my backups in such a way that, when I will get C, I can safely move all of the data I had in B plus all of the changes and modifications that I have done during the 2 month transition?
Can I just continue to use Time Machine (on A) to update the old backups? I am afraid that some mess could be created because the computers are different (before the backups were taken on B, while now on A), even the present data are different (because now A only contains a subset of the original B data, which I do NOT want to lose), the good point is that the user is the same.
i am having a minor problem with TM
i use 1 external tb to back up everything
i back up about 725 gb if stuff and when i go to run my TM it tells me i only have 150 or so GB of space to back up the aforementioned 725gb.
Maybe i misunderstood TM, but cant i back up multiple days without using the same size of backup? i.e. i back up january 1st, december 1st and november 1st and it wont need 2.175 TB of space?