I have a clone of a former G5 startup drive on a WD MyBook external HD that has never really been able to boot for the past few months, especially on an Intel MacBook. I've been able to recover some of the info manually using an old G4 Powerbook, but never completely recovered all of the info. I tried doing all that DD Rescue stuff, but it became a little too involved and over my head. There are still a few documents I'd like to try and salvage from the drive. Although the drive does get recognized on my MB, I can't access the info. The drive is actually in three partitions and I can only access one of them for some reason. I'm thinking about purchasing something like Disk Warrior to see if this would work. Is Disk Warrior or a similar program worth a shot?
We lost a few files we were working on yesterday. Nothing saved after about 1PM can be found. Eek! . Is there a good way to deal with this, see if there are files there that are not showing up somehow perhaps? Or a good file recovery program perhaps?
I'm on a 2008 model Mac Pro 8-core system for work. For whatever reason it doesn't have a recovery partition. I read that if I don't have a recovery partition, I can't make a recovery USB bootable drive....so how do I make one? And no, I cannot reinstall the OS on here, that would be beyond detrimental to what's going on here. (too many details to get into)Â
Alternatively, can I make one with my 10.8.5 MacbookPro at home and run it here on my Lion system?Â
I am trying to recovery a file created in Microsoft Office 2008 for Mac. The file was lost after a power outage. In an attempt to recover the file, my first thought was to check for the file in the Microsoft AutoRecovery 2008 folder within my hardrive. However, the folder only contains a total of four files! Why? If my Microsoft Word is set up to auto save a document every 10 minutes...then how is it possible the folder could only contain 4 files? I am at a loss of how else to recover this file. I am currently attempting to do so with a free trial of Data Recovery Software to see if the file I lost even still exists, with no success so far.Â
I have a 15-inch MacBook Pro, the new unibody ones, and I installed Windows XP, using BootCamp.
I made it a 29 or so GB partition, so it used the FAT32 formatting.
The program I tried to install is the eyeQ speed reading program, and the laptop exceeds every single one of the recommended requirements.
The problem comes when I am attempting to install the program, I keep getting an error message in which it says "This program cannot run on a computer with less than 64 megabytes of ram."
Last time I checked my laptop has 4 GB of ram, and it says the same thing when I checked it while running Windows XP.
My only guess, which I made while typing this, was that I should have formatted the Windows partition using NTSF.
I want to capture selections on my screen and add comments. Is there a program out there that will allow me to do that? I don't like the "grab it" program because it saves the captured file in a Tiff format instead of a Jpeg format.
is it possible to take a program made from a PC and make it run on a mac? without crossover (it never works)its not a complex program but it never works from me
I'm looking for an app that will allow me to specify which folders I want to copy to my external drive, updating existing files within it and copying new ones.
I don't want to backup settings, my whole harddrive nor make a bootable backup. Just something to backup what I want to backup and where.
Not sure if Time Machine can do that, but it wants me to reformat my external before I can even find out..and considering how much is on there, I really don't want to have to remove that all elsewhere while doing so. [Don't think I could anyway, none of my internal drives have that much space.]
So, does anyone know of a relatively painless backup app that could do simply what I want? Doesn't sound all that complicated in comparison to some of the more convoluted backup apps I keep finding.
I am trying to switch my email program from Thunderbird to the mac email program Mail.Thunderbird has been playing up a lot recently and am tired of the glitches.
I have all the correct server settings etc and succesfully imported my mailboxes. The problem is that when I send an email it isn't from the right email address?? Is this a Mail problem or smth to do with my settings? I'm with Virgin media and have a separate set of email address through my website for my business so my email address are through freeola that I am using through Thunderbird.I'm sorry if this all sounds very stupid but I am pulling my hair out trying to figure out where I have gone wrong!
I accidentally deleted all of the files on a friend's portable drive, when using terminal to try to delete a very large folder (the Trash Can was not working it was so large)--since the files/folders were very recently deleted I am looking into data recovery software to get the files back. The problem is that the HFS file system seems to be designed in such a way that once a folder/file is deleted, it is very difficult to recover it's name even if its data can be recovered, so most data recovery programs (such as FileSalvage) will recover only known file types and give them a a number (such as 0004.jpg). Does anyone know of any Mac/HFS recovery software that has found a way around this particular issue and can recover data with the folder structure/file names intact?
I was uploading photos into iPhoto (with the delete originals option on) and my entire system froze up so I had to restart my MBP using the powerbutton. Going back to get the photos, all but 5 are gone. Any way to check if I can get any back? I'd be willing to buy reasonably priced software, but free is always better.
I download Tech Tool Pro 5 version. Tried for optimization my two disks in MacPro, at first im choice defragment one volume, then optimization in this program. Now all my custom dmg files not mounted, I view message - not recognized, bla-bla and no mountd. Help me to recovery data. Mac OS X 10.5.6 build 9G55 Tech Tool Pro 5.0.1 dmg - Apple Map Partition read/write 4.4 Gb - all images, HFS+
I'm trying to recover a password from Firefox, or possibly Safari. It does NOT show up on Keychain Access so I assume that I never actually saved the password, but I was wondering if there's an add-on or a separate program for Macs that will let me recover the password?
I had to reinstall everything from a time machine backup yesterday and now my recovery hd partition is gone. Everything is working ok but i would like to know what happened to the recovery disk Also i was wondering if i could reinstall my apps from a time machine backup if i had to reinstall lion from internet reinstall
Anyway when I came to install this on my selected partition (Macintosh HD) I was presented with the following error "Lion recovery update cannot be installed on this disk. An error occurred while evaluating JavaScript for the package"
woke up this morning to a software update, go to restart for the big osx update and the load bar gets about an eighth of the way home and freezes, disappears and then the computer powers down. happens consistently for the next 10 minutes or so, so i get into recovery mode>disk utility, HD wont verify, go to repair it and theres another error. Can I backup onto an external HD from disk utility in recovery mode or will it not let me?
Info: MacBook Pro (15-inch 2.4/2.2 GHz), Mac OS X (10.7.2)
Using 10.7.3 on a new Mini and trying to use the "recovery" to reset the disk. Holding down Control - "R" on restart does nothing, goes immediately to normal desktop instead of the Disk Utilities or the RecoveryHD, I've tried all the combo's I can think of as well as Control - Option - "R", again straight to desktop. This is a new Mini with OSX 10.7.3 factory installed. Initial startup seemed to be normal. Can't find the RecoveryHD....I'm going to take it back and upgrade, so my interest is in erasing anything that would allow access to my data and the applications I installed (only Office).
I have a Mac Pro that I purchased in February 2012, and I'm selling it because the printing sub-system on a Mac is terrible. Won't go into details here -- suffice to say I've spent these past 3 months going round-and-round with printing issues, and I'm tired of dealing with it.Since I'm selling it, I wanted to erase everything and re-set it all back to factory specs.I had two partitions on there, the original Mac partition, and a BootCamp partition. Booting up using Command+R and selecting Disk Utility wouldn't let me erase those partitions and create a single new partition Kept giving me a Cannot Unmount Disk error. So I used a partition manager on The Ultimate Boot CD to erase the paritions on my Mac's HDD..Figured I would then use Internet Recovery to re-load everything on there. Don't really care if it takes a few hours to download.But Internet Recovery is not working..I hold Command+R or Command+Option+R and they both do the same thing -- a blinking folder with a question-mark in the midddle of it.
And the only thing I can find that will let me try using an external disk to boot with is something called Lion Recovery Disk Assistant -- but I can't use that because it requires a functioning Mac with a Recovery Partition.So how do I get this stupid thing to boot up to the Internet Recovery mode? I need to get it ready to ship later today.
I am having problems with booting my wife's 2010 iMac. It never boots completely. I gets to a point where the screen flashes over and over a message something about opening (or not) windows which were open when I shut down.Â
When I hold the OPTION key at startup I get the 'option' to start up with my system hard drive or Recovery 10.9.1.
What happens if I click on Recovery 10.9.1?Â
Info: Mac Pro, OS X Mavericks (10.9.4), late 2013, Aperture 3.5.1
I'm running OSX 10.6.8 on an old 2007 Macbook. I replaced the HD on the computer a year or two ago (I rarely ever use the computer) and I must have reformatted the drive to exclude the Recovery HD. Now I want to restore my Macbook to factory defaults (delete and wipe everything) and I can't because there is no Recovery Mode to boot into.Â
Nothing happens when I hold Command+r on reboot, and when I hold Option on reboot I only see my Mac HD, which confirms that the Recovery HD does not exist. What else can I do to restore my Macbook? I tried to download and install the Recovery drive that boots off of a flash drive, but it requires OSX 10.7. Do I need to upgrade my OS and then boot from a flash drive? Is there really no other way to just DELETE everything?Â
Info: MacBook, Mac OS X (10.6.8), 2007 Black Maccbook
DATA RECOVERY SOFTWARE - OR - DATA RECOVERY COMPANIES?
I shot a film this summer on RED ONE digital camera, and now BOTH of my Lacie 2TB drives in which we deposited the footage aren't working. I NEED to recover data.
In researching here and online, I've looked into software options such as Data Rescue 3 and Disk Warrior.
I've also investigated companies in which you mail the drive into them. Lacie themselves recommended a CA outfit called Drive Savers Data Recovery; I've also investigated On Track Data Recovery (the world's largest), and ESS Data Recovery. There's also Tekserve here in Manhattan.
Does anyone have any experience with any of these options/companies specifically? Huge differences in price; everyone seems confident, ESS the most realistic.
What is the best route to recover my film?
The drives have about 800 GB of film footage - in the form of RED's proprietary software - R3D file extensions, plus Quicktime proxies.
Here are the drive issues:
DRIVE #1 - My Master copy of film: my iMac had OS 10.4.11; the drive mounted no problem; I upgraded a few days ago to Snow Leopard 10.6.4. Now it doesn't mount. It's in Disk Utility but the volume line is greyed out. The Apple Store folks tested my iMac and my drive and said it's the drive. They said it was just a coincidence that the drive developed an issue at the same time I upgraded my OS.
DRIVE #2 - was initialized in a Dell laptop, but NOT formatted.
I have 205 files that were accidentally deleted from my computers hard drive. The files are visible in PodSalvage. Can any Macintosh genius, hackers etc. direct me to a freeware application or method to recover the files?
Im trying to recover a Word document that is password protected. Is there any freeware that will do this? I don't care what the solution is, I just want it to be free. Is there anything that can be done?
I have a guest account on my Mac with a background image I really like. The problem is that it looks like someone deleted the actual background image, because I can't find it anymore. When I login to the account, the image is still being shown.
Ok, so this is probably a huge no-no but I have to ask. I'm currently on OSX 10.4.11 and I want to make that leap into Leopard but I'm not trying to shell out $130 if I don't have to.
Can I just use my friend's Recovery CD he got in the box with his Leopard Macbook? The specs are slightly different but it's essentially the same thing.
I got my hands on a few eMacs for cheap and I'm in the process of cleaning them up. I'm able to get into most of them but have no idea what the usernames or passwords are for the last one of them.
I've tried these instructions but they don't seem to work.
Quote:
OSX 10.3 + Hold down Apple-S when the computer starts, then type the following commands:
1. /sbin/fsck -y 2. /sbin/mount -wu / 3. /sbin/SystemStarter 4. /usr/libexec/register_mach_bootstrap_servers /etc/mach_init.d 5. cd /var/db/netinfo; netinfod -s local 6. /sbin/SystemStarter
After I enter the fifth command, I get the large block cursor and it doesn't go away when I press enter.
