Hardware :: Force Time Capsule To Use Ethernet Without Turning Airport Off?
Dec 18, 2010
I've searched and found a couple solutions to force a Time Capsule to use an ethernet connection for data transfer. Those are 1) turn my Mac's Airport off or 2) turn off the Time Capsule's wireless network.My question is: since those solutions, has anyone found a better alternative to force a Time Capsule to use ethernet that doesn't involve turning off the Mac's Airport or changing its settings each time?My need for this is: I have a first gen Time Capsule, and despite outliving the statistics for a long time, it's finally starting to fail. It's not actually dead yet, though ? the wireless still works, but it's much, much slower than it used to be. The hard drive is fine. I've since switched our primary wireless network over to the Airport Express I was using for Airplay, and I'm having the Time Capsule "join" its new network.
The Apple site is quite vague on this point but I thought I'd clarify before buying one. I have a Time Capsule as my main router, but I want to move it, but when I do it's out of range of one of my computers. Can I plug the Express in near the computer, and then Ethernet it up to the computer, or is that Ethernet port meant to go into the TC?
Is it possible to use an Time Capsule to connect to an airport express with a router plugged into it?
I have a small network at home, and would like to have another computer (old PowerMac g4, no wireless card) and my xbox 360 in my basement. I don't want to run cables. Is it possible to connect a router to my airport express and use it to bridge the wired computers wirelessly to the time capsule upstairs? I know it's possible to use the airport express as an extension to the wireless as a WDS but I haven't found anything online about using it as a bridge.
I have my iMac connected to my wireless router via ethernet, but also airport is on. At the top right I can see I am connected to my network. How can I chose the faster ethernet to connect without turning of airport? How can I be sure the connection is with ethernet and not wireless?
One thins, I don't know why but when I post this thread the WIRELESS moves to the TC. The connection of the AP is directly to the SW, not to the Time Capsule.
TC.- 192.168.2.2 SW.- 192.168.2.1 (interface attached to the TC) SW.- 192.168.1.1 (interface attached to the access point) MBP.- 192.168.1.23
The TC has the AirPort off. I can access the TC if I type the IP address when open the AirPort application, what I do is this: AirPort application -> File -> Configure other I type the ip address 192.168.2.2 (The TC current IP address) and I'm able to see it. The problem is that if I try to open the Time Machine application I can't find it because the AirPort application stuck in RESCAN.
I just went through a long and complicated process that started when my apartment was burglarized and my laptop was taken, through getting a new laptop, replacing that harddrive and restoring from a backup of my old laptop. After all that, I hooked up my new laptop to the time capsule and restored everything via ethernet. I'm now using my TC as a network extender for the house, I can connect to it and see the files in there, but when I try to set up Time Machine to use it, it starts backing up my entire laptop all over again, which apparently would take 48+ hours over WiFi. I'm guessing that when I set it up earlier and made the backup, it was over Ethernet. Now, it can't find the time capsule over ethernet, and thinks that the time capsule via WiFi is a new source. Is there any way to select a time machine file to use and update? I'm using a 1st generation 1 TB Time Capsule with an uMBP 13", 10.6.5. All software is up to date.
Whenever I plug my Time Capsule into my Macbook with an ethernet cable it is not recognised. On the network setting it says that the ethernet is assigned an IP but whenever I try to start a backup session the device is not displayed? I can connect the Time Capsule wirelessly however due to the time it takes to do the initial backup I want to do it via ethernet.
I currently have a Sky provided D-Link modem router that provides my wireless internet (in my lounge, as this is where the phone line is), and the Time Capsule sits nicely out of the way in my kitchen, wirelessly backing up via Time Machine. My wife would like to sit in the kitchen and work on her laptop, but her company's IT policy means that she can only connect via Ethernet. Currently she has to connect to the D-Link in the lounge and sit on the floor. Is there a way of connecting her laptop to the ethernet ports on the back of the TC and then wirelessly connect to the internet?
I will soon get a time capsule. The only thing it does not have, which I need, is an audio jack so I can use airtunes. I have an old (circa 2004) airport express. I would like to set the airport express right next to the time capsule and add it as a client on the time capsule's ethernet network.
I prefer to connect it via ethernet, than to just add the AEX as a wireless client of the time capsule, for two reasons: 1) if connected via ethernet the AEX is less likely to drop off the network for random reasons. 2) the AEX is old and I don't want it to slow down the time capsule's wireless network (every other wireless client of the time capsule will be 802.11n).
So I basically want to shut off the AEX's wireless capability and just connect it via ethernet as a LAN client of the time capsule. Is this possible? Or is wireless the only way to add an AEX as a client to a network.
So I am moving to a new apartment in a week, and the landlord allows us access to his wifi in the building free, but I will not have access to the modem. I currently have a Time Capsule set up as my wifi router and was wondering if, upon moving, there is a way to run the wifi signal through my Time Capsule and use that as my wifi connection?
I just got a time capsule and replaced my extreme with it then added my 2 expresses to the network. Was getting 28-33mbps download speeds using speedtest.net to test now i'm getting only 4-6mbps. WTH!!! Also the transfer rate for backing up my macbook to the tc drive is ridiculous!!!
Just bought a new Airport Time Capsule 3TB for backup purposes and to use as the main router in my home (model number A1470 the latest tall one). I was originally using an AirPort Extreme (model number 1408 approx 6" square and 1' tall) for my main router.
I got the TC setup and putting out good wifi signal, but would like to take my Extreme and extend it off the TC to boost signal in other parts of my house, but having some difficulty. I searched the forums and found setup instructions to do this, but I get a message saying, "unexpected error. Try again." Well, tried again and still no luck.
I have a new 1 tb Time capsule that I connected with the macbook pro i7 with a ethernetcable in the ehternet outlet next to the usb on the time capsule.
However, I dont see the time capsule hard drive in the Macintosh HD devices.
I've got a Time Capsule attached to an Ethernet network, which gets it's internet access from DSL. I can't seem to get the configuration I want. I'd like it to be part of the ethernet network, available to Macs on the network and I'd like it to act as a wireless access point for Macbooks and Macbook Pros. But when I go through the Airport Utility install, once I tell it it is to connect to the network, which already has internet set up through DSL, then it won't allow me to set up wireless. It's as if it wants to work one way or the other. And the instructions are confusing about which port in the back of the unit to insert the network cable. I did manage to get it set up and connected to the network, and to deliver wireless, but I ended up creating a "bridge" and doing things I did not quite understand.
I ended up creating a wireless network and I guess "bridging" that network with the ethernet. Maybe that's the right thing to do, I don't know. Maybe I'm just not understanding the terminology right. is "creating a wireless network" the same thing as merely creating a wireless access point for a wireless device to connect too? I guess I was thinking that they were two different things, maybe not. So, it's probably a simple thing, and I hope someone can just tell me in what way I am supposed to set up the Time Capsule. I know I got it working, but I can't even remember how after a zillion tries I even got it working right.
I have a first generation Time Capsule. I want to by a laser all-in-one printer and would like to be able to print wirelessly (wireless scanning would be nice too, but I'm not so bothered about that). I'm thinking of buying a Brother MFC-7840W and have a few questions:
1. This all-in-one is wireless (b/g), so if I set it up as a wireless printer using the printer's wireless feature, would it have the effect of slowing down my N speed connection for Time Capsule? I plan on leaving the printer on all the time so it's ready to print if I need it (I assume it will go into standby mode when not in use) - I don't mind it slowing the network speed just while I print, but wouldn't want it to slow my connection down permanently.
2. If option 1 slows things down, how about if I connect the printer via ethernet. Would that work easily for printing? Would I be able to scan too? In other words, is plugging in an ethernet printer on a TC the same in terms of functionality as a direct ethernet connection between my MacBook and the printer?
Disregarding the internet access/router/gateway part of the Time Capsule for a moment, what is supposed to happen when you plug a time capsule directly into a Mac via ethernet cable?
- Does a dialog box come up? - Are you supposed to be able to see the disk in the Finder? - Is Time Machine supposed to see it?
Mine does nothing when I plug it in using a known-good cable. Suspect bad ethernet port on Time Capsule itself (because it also doesn't realize the cable is plugged in to an upstream DSL modem, either) - wondering what the expected behavior of a properly working one is?
Just got the time capsule, going to use it for wireless time machine back ups of my laptop. I would also like to connect an external drive to the time capsule for movies and audio files that are too big for my laptop.
I notice if I connect my owc 7200 rpm external drive via the USB port to the time capsule, things are a bit sluggish when I access movie/audio files over the wireless...What if I purchased an external drive with an ethernet port? would it work if I plugged it into the time capsule? and if so would there be a speed increase?
I think this has been debated somewhere, but what's the best option? And what are the pros and cons of each setup? Actually I put my Netgear in "modem only" and setup the TC as the main router and configured PPPoE settings on it. Should I have chosen bridge mode instead?
I need some advice with my wireless set-up. I have: Airport Extreme (master network) Airport Express (slave) Time Capsule (slave)
Right now I have my XBox 360 hooked up to my Express through a wired connection (works fine). I have a Mac Mini hooked up to my Time Capsule through a wired connection (doesn't work at all). When I look at the settings, it isn't even an option to bridge the TC, so as it stands in its slave capacity I cannot use any of the three wired ethernet ports. Is it possible in its current network configuration to get the TC to recognize the Mac Mini I have connected through a wired connection?
I know there have been many posts on this in the past but I think I am getting even slower speeds than most who have complained. My TC is backing up at a rate of about 1 Gig per 45 min to an hour. I have plugged in an ethernet cable and set ethernet above wireless in my network hierarchy but it appears that this is not working. This is my initial backup so I don't want to risk it by turning off my airport if it is transferring using wireless. Shouldn't the ethernet connection go much faster even though my Time Capsule is not plugged into our modem?
It keeps saying you need a Time Capsule from '2008' to use this feature. I thought they were all from 2008+? So is this really saying it won't work with the first generation time capsule? The second generation being the one that added wideband support?
I'm facing a very misterious issue with my internet connection, using a Time Capsule; If I use a network cable to connect to the Time Capsule, the connection to the internet is very slow (Maxes at 2mbit, never more). If use a wifi connection to connect to the same Time Capsule, internet is flawlessly fast, reaching well over 80Mbit.
I checked and the ip is always the same, the downloads are the same, at the same time. Even trying with 2 computers (a Macbook and an iMac) (one over wifi, one on ethernet cable) the one using wifi can download stuff way faster. If I switch connections the one using wifi is always faster.
I use DHCP for both ethernet and wifi on the same local network, all the machines can see each other, it's just the internet connection that becomes so slow when using ethernet. The local network as as fast as a gigabit connection allows. The Time Capsule has the latest firmware installed, and has no problems at all besides this internet issue.
I am connected to a wireless router downstairs for my internet connection. I am trying to use my new (bought second-hand on ebay) time capsule to store all my files on. I have installed the disk that came with it but when I try to find the capsule via Airport Utility it is unable to do so. The amber light is flashing like it is supposed to. I have tried using the ethernet cable also but my mac doesn't notice it
I will be getting my new Macbook Pro in the near future and am very interested in using Time Machine to wireless back up my data to an external hard drive. I know I can use Time Capsule to do this, but also hear a mention of just getting an Airport Extreme and my own ext. hd. My question is that I have Verizon FIOS Internet and my modem also functions as a wireless router. How would the Time Capsule/Airport Extreme work with this? Is it possible? I do not believe that the Verizon router supports wireless N, and I would like to take advantage of the faster speeds. If I were to connect a Airport Extreme to the wireless router, would I then have 2 routers to choose from and just use the Airport Extreme to use the wireless N? I'm very confused as to how I could make this work.
is it possible to run both a wireless connection with airport express, as well as have a direct ethernet connection to the computer? i have a simple, two-way ethernet splitter than comes from the port in the wall that should technically be able to do this, but i have tried this without success and i am guessing there is a little more to this problem than just having both connections hooked up at the same time.
anyways right now i am running on an airport express wireless connection. at my school there is a campus-based p2p program that can only be accessed through direct ethernet connection, leaving me inaccessible to it when i am on my wireless connection. there is a bunch of registration junk that has to be done when i switch from ethernet to wireless, which is why i would prefer to have both set up at once.
Just got a new MacBook Pro, and I want to back it up wirelessly using Time Machine over my Airport Extreme Network. I've been doing this, in the past, with a smaller hard drive connected to the USB port on the AEBS, but need to upgrade to a bigger hard drive. Is there any speed benefit from getting a hard drive with ethernet capability, and attaching it right into the ethernet port on the AEBS, and if so can I back up with Time Machine wirelessly using this configuration? My AEBS is the first gen of the 'n' version that came out, but is gigabit ethernet, if that matters.
I have a time capsule coming on Monday. I currently have an old airport extreme connected to my DSL. Can I keep accessing the internet through the old Airport Extreme and use the Time Capsule just for Time Machine backup? This is the type of Airport I have right now.
