OS X :: 10.5 System - Partition Inactive - Make Active Again?
Mar 10, 2009
I am using an EXTERNAL seagate 250gb drive formatted with the apple partition map on a osx10.4 system with no problems (intel based). I then plugged it into a 10.5 system (ppc system), it displayed some message which I ignored, perhaps to my peril, and began to backup some files and the transfer was moving quite slow. The drive was unplugged before the transfer was completed. I now try to use the drive on my 10.4 system and even-though the partition is still visible (in disk utility) it is not active (the drive is in black font but the partition is in grey font). Did the 10.5 system possibly make the partition inactive, if so how to do i make it active again? When I attempt to verify the disk, it reports that there is an "INVALID SIBLING LINK" and tells me that the volume needs repair. I try to repair the disc and it fails "INVALID SIBLING LINK" and the "THE UNDERLYING TASK REPORTED FAILURE ON EXIT" I would really like not to have to take this to a data recovery service and I am not tech challenged so I don't think I need to do this as the Hdd didn't fail, I hope.
I upgraded my HDD, I simply used disk Utility to move data for the OSX HFS partition.
I tried to use Winclone to move but that didn't work too well, plus there is a unnecessary image step, so I ended up moving using disk utility again which again went fine.
The only problem is that rather than creating the partition through bootcamp assistant, I created it straight in diskutility and windows is not bootable.
I tried using fdisk to fix but that didn't work.
The partition table is GUID based and the windows partition is NTFS.
Could not find such a thread and since this is quite an annoying problem, I decided to register The problem I am encountering since a few days is when I open a finder window, it starts to sort of "flash" from inactive to active window (even when there is no other window/application opened).[Please refer to post below for updated information on the problem]This happens on my MacBook running 10.5.3 (unfortunately I cannot say if the issue only appeared after the update).
BUT.. I just doubled my RAM from 1 to 2 gigs. After a fresh boot and loading up Safari, Firefox, and iPhoto, and then CLOSING all of them and running no apps, Leopard shows more than a gig of ACTIVE memory, which even after sitting there for an hour doing nothing - does NOT go over to the INactive section. Why? I'm not asking why it doesn't go to "free". I know why.
I recently reformatted my entire drive and reinstalled Lion with the official Lion USB recovery tool/usb. Now in disk utility the Partition Layout option is greyed out and I can not seem to re partition my disk. Ive tried repairing my disk rights but still its greyed out.
I ran a demo of iPartition and this message was flagged:
"You cannot make changes to the disk from which your system booted.
To make changes to this disk, you should either boot from an external drive, use Target Disk Mode with another Mac, or create a bootable CD/DVD."Does this mean I can only make changes with it when booting with the usb? This doesnt make sense as it worked on the default startdisk before. Does anyone have solution?
I have an MBA 2011 with 10.7.4 and Safari 5.1.7. I am very shortsighted and have struggled with the poor contrast levels between tabs and the rest of the Safari UI. My solution has been to switch off tabs, use windows instead. and configure my right option key as an App Expose shortcut. This works very nicely, but the only fly in the ointment is that when I click on a link I wish to open in a new window, it defaults to always opening in a new ACTIVE window, when I'd usually prefer it to open in the background as per tabs.
I have checked and unchecked the option in the 'tabs' preference pane with no luck- do I need to re login to make this stick? CMD-Click works to a point, but it's not reliable, and I find it finicky, even though I've routed it to a touchpad gesture through BetterTouchTool. Is there any other way to force safari to open new windows in the background - perhaps by adding a new item to the context menu? I'd really like to resolve this as I'd love to make the switch from Chrome to Safari, especially with ML coming very soon.
Info: MacBook Air (13-INCH, MID 2011), Mac OS X (10.7.4)
At a random time months ago (I cant pinpoint what triggered it) certain windows started to make themselves half-opaque when inactive. They seem to be "cocoa" applications (though I'm not sure the exact definition of that). The windows that are effected are: Skype v2.8.0 (chat windows only, not main 'buddy list') iMovie / iPhoto... I think there are more, I can't figure out which though. I'll update. The windows that are (surprisingly) NOT effected are: Windows Live Messenger v7.0.2
Textedit Microsoft Word 2007 Firefox v3.6
I have the program named "Afloat" and it seems to be inconsequential to the problem.
i just downloaded GIMP and it uses multiple windows and i have to click the window once first to make it active before i can select anything inside it. is there any way to make multiple windows active so i dont have to click before using a window?
Just a quick rundown of what I'm trying to do here:I have a 1 TB external USB SimpleDrive hard drive that is currently partitioned into three partitions, two formatted with FAT32 and one formatted with HFS+ for Time Machine. I learned how to enable Mac OS X 10.6 Snow Leopard's NTFS read-write capability today and so I no longer need to keep my first two partitions as FAT32 (especially since I have files larger than 4 GB I would like to store on them). I have data on the first FAT32 partition that I would like to transfer to the second FAT32 partition once I have reformatted it as NTFS whereby I will then be able to reformat the first FAT32 partition to NTFS without losing my data.I have nothing important on the second FAT32 partition, but when I opened Disk Management in Administrative Tools in Windows 7, I found that the second FAT32 partition is currently set as the active partition of that volume. When I right-clicked and asked to Format that partition exclusively, I received the following
Just tried holding 6 & 4 on my mini during boot-up, it took a little longer to boot the first time (building cache?) and when I checked the system profiler, 64-bit was active!
When I try to bind my mac to an active directory domain I get the error message (“An invalid Domain and Forest combination was specified. You should enter a fully qualified DNS name for the domain and forest”). I have tried so many things,nothing works?
Any ideas as to why my iMac wants to log off constantly. I have it password protected to wake up (purely to keep my kids off) but no other power saver features activated.Whenever I walk away for any period of time, it has tried to log out and may have stalled due to the fact that I've left Safari open or the like, but otherwise logs off completely.
could not be sure whether the Admin user - password reset with the CD would be the solution to my question as suggested in previous threads I searched - and have no idea where my start up install CD is
So my question-
I was trying to put parental control to ask for password when my computer starts up. I did something I guess and messed up the info.
I can log in with my own account when I restart my apple - which says now it is a standard account (must have messed that up)- but can not make any changes on system preferences or anything else that requires login and password. It requires Admin info. My own login that I use now used to be my admin so do not have any other info set.
now on system pref - accounts - an account titled "test" seems to be admin but can not even access that and reverse myself to be the admin since I can not unlock system pref. Or cant click on "Login Options" for the same reason.
There are no other users on this computer than me.
I am trying to Install Windows 7 on my macbook pro (mid-2009) and during the beginning of installation, it says that windows 7 cannot install on the boot camp partition because its not NTFS. So I had to cancel installation. Anyone know how to Make boot camp assistant partition in NTFS? or in any way so I can install windows 7?
I have a MBP 2.4 SR and windows XP 32bit is installed on Boot Camp... I would like to know if it's possible to resize the OSX partition to make it bigger... Or do I have to uninstall windows and install it again...? Because I really need the space...
Btw, is there a program that can tell me what optional leopard software (printer drivers etc.) are installed?
I am trying to make a second partition on the internal HDD of my Macbook usking Disk Utility. Disk Utility is being run after booting up from the OS X install DVD.I get an error of Partition failed with the errorFilesystem verify or repair failed"hat is going on? How do I fix it so I can make a partition?
What is the best way to make a FAT32 partition on a MacBook's internal hard drive? (I plan to use it to share files between OS X and Windows.) I did some research on this, and some people say to use Disk Utility, however, the only disk format available for me is "Mac OS Extended (Journaled)" and there are no FAT32 or FAT or MS-DOS options. Perhaps those options were taken out since then(?). One other person said to create the partition using Windows, which I think would work, but I'm a little worried about that because I've read that editing partitions outside of OS X can prevent Boot Camp from seeing the partitions.
I'm thinking that my best bet would be using Windows to shrink its own partition, then turning the resulting unformatted space into a FAT32 partition. Since I'm not touching the OS X partition I'm hoping there wouldn't be any problems. I just wanted to confirm whether or not that would work and/or what a better method would be.
When I try to make another partition on my harddrive (I've already made one housing windows XP), the bootcamp utility that my mac came with only gives me the option of removing the current partition. How do I make another one?
Wirelessly posted (Mozilla/5.0 (iPhone; U; CPU iPhone OS 4_1 like Mac OS X; en-us) AppleWebKit/532.9 (KHTML, like Gecko) Version/4.0.5 Mobile/8B117 Safari/6531.22.7)
So if I have 10.6 installed and want to install Windows on a Mac, how can I create a 3rd (shared) FAT32 partition without reformatting the hard drive? I know how to without reformatting, but is there any way to just split my current partition into 2? I know how to do this on Windows, that is by shrinking the partition, but is there any similar function on a Mac so I don't lost existing files?
I have a 50GB windows partition through bootcamp. The problem with it is that it's too small and i constantly have to uninstall games to put new ones on. How can i re-size it without backing up all my saved games, removing the partition and making a new one?
All I want to do is simply shrink the size of my HFS+ partition and make my NTFS partition bigger. I tried CampTune but it doesn't detect my hard drive (common problem). I'm going to try iPartition soon. In Windows, resizing partitions was a snap. Doesn't seem to be that easy in OS X for some reason.
I was gonna try Disk Utility but it says that it may make my Boot Camp partition unbootable. I don't really want to take a chance. I just made my HFS+ partition smaller in boot camp, but it won't let me touch my NTFS partition. I'm thinking about going into Windows 7 and using Disk Management to extend the NTFS partition.
trying to partition the drive (320 gig) to install windows 7 on. after allocating the space and setting the format to FAT32, it quits about half way and tells me partition failure. try lowering the amount of space devoted to the partition. even when shortening it I keep getting the same error.
If I wanted to reinstall Windows (currently using 32bit, want to upgrade to 64), I assume I would remove the partition, make a new one, and reinstall Windows from there. Now, will the same Product Key work if I did it like this? As far as I know, because the Product Key has already been used it won't let me.
I wanted to make a partition like this: but when I click apply, the size keeps going back to half of my hard drive. How do I get it to stay at 40.00 GB? It also shows this when I click apply, so it doesn't work anyway. How do I fix that?
On my Mac Pro I don't know how to delete a partition and make a new one on a hard disk.I used disc utility to initialize the partition, but it doesn't show any chance to delete or change the partition i created
