I am trying to make a second partition on the internal HDD of my Macbook usking Disk Utility. Disk Utility is being run after booting up from the OS X install DVD.I get an error of Partition failed with the errorFilesystem verify or repair failed"hat is going on? How do I fix it so I can make a partition?
View 2 RepliesWhat is the best way to make a FAT32 partition on a MacBook's internal hard drive? (I plan to use it to share files between OS X and Windows.) I did some research on this, and some people say to use Disk Utility, however, the only disk format available for me is "Mac OS Extended (Journaled)" and there are no FAT32 or FAT or MS-DOS options. Perhaps those options were taken out since then(?). One other person said to create the partition using Windows, which I think would work, but I'm a little worried about that because I've read that editing partitions outside of OS X can prevent Boot Camp from seeing the partitions.
I'm thinking that my best bet would be using Windows to shrink its own partition, then turning the resulting unformatted space into a FAT32 partition. Since I'm not touching the OS X partition I'm hoping there wouldn't be any problems. I just wanted to confirm whether or not that would work and/or what a better method would be.
I've recently experienced my 2013 MBP 13" getting slower and as the HD was getting full I decided to upgrade from 500GB to 1 TB.
The first disk i tried was the Seagate sshd slim hybrid disk. This disk was fine (and bootable) in an external USB enclosure, but once I cloned my MBP (using CCC) and mounted the disk internally it wouldn't boot. I tried formatting the disk using disk utility, both booted from the original HD i the usb enclosure and via the online recovery system. All to no avail. Disk utility kept giving error messages saying "can not make disk passive"(roughly translated from Danish).
At that point CCC tech support told me to get a new HD as he was certain it was faulty.
I did just that but now the new (WD blue 1 TB) drive can't be formated as well. I get the error: "wiping volume data to prevent future accidental probing failed"
I am at a loss as to what to do. The MBP works fine, albeit slow booted from the original HD, but I can't seem to partition any new drive.
Info:
MacBook Pro (13-inch Mid 2012), OS X Mavericks (10.9.4)
How I get OS X on the SSD without a disc? Can I download the installer on a flash drive somehow? Also, If this is really good using my Macbook Pro's HDD for a backup HDD, instead of buying one? I have no use for it anyway, if and when I get a new SSD. BTW, the HDD is the upgraded factory 500gb 7200rpm. Also, do you think it's smarter to have a bigger backup drive than internal drive?
In other words, I would like to get a 1TB Samsung 850 Pro SSD, and my current HDD is only 500GB.... I am a musician and need a lot of storage for musical purposes. I use Final Cut Pro, Logic Pro X, Ableton Live 9, Office, and Photoshop.... My Macbook Pro is a Late 2011 Macbook Pro 15.4' 2.2ghz quad core i7 8gb RAM. I think I should get an enclosure that has a thunderbolt port with usb.
Info:
MacBook Pro, OS X Mavericks (10.9.5)
Can you make more than one partition on boot camp because I want to try Linux
View 5 Replies View RelatedHow can i make a single partition on mac book pro? My bootcamp is not working properly,so i need to return back to a single partition .
Info:
MacBook Pro, Mac OS X (10.6.8)
I have a 13 inch Aluminum Late 2008 MacBook. Processor 2 GHz Intel Core 2 Duo, Memory 4 GB 1067 MHz DDR3, Software Mac OS X Lion 10.7.4 (11E53). Currently I have a 160 GB SATA disk as my hard drive a d 4 GB of memory. (Is it time to upgrade or what?) I recently bought a Western Digital 1 TB internal hard drive to replace my exisiting internal hard drive. I spent a lot of time last night trying to first- connect this new hard drive to my computer so that I can then clone the existing hard drive and then hoping that I would get that done so I could install the new hard drive. No such luck.Â
My current hard drive is partitioned as follows:Â
Name:Â Macintosh HD
Format: Mac OS Extended (journaled)
Size: 132.5 GBÂ
Name:Â BOOTCAMP
Format: Windows NT File System (NTFS)
Size: 26.69 GBÂ
When I was partitioning the new drive I did so as follows:Â
Name: Macintosh HD
Format: Mac OS Extended (Journaled)
Size: 973.51 GBÂ
Name:Â BOOTCAMP
Format: MS-DOS (FAT) --- This was the only option that I was given that I thought would work. I did not have the option of "Windows NT File System (NTFS) to choose from. Question # 1: is that going to be a problem? I only run 1 program on Windows and that is the only reason I have BOOTCAMP on there at all. However, I do HAVE to have that program. Like I said it didn't give me the option to choose Windows so I didn't know where to go with this. Any help with that would be awesome.
Size: 26.34 GB (I just used the same size that was current, or close to it.) I connected the Western Digital 1 TB through an external device, partitioned it as stated above, and then used Carbon Copy Cloner to clone the drives. The first one went through fine. (It took 2 hours and I went to bed before it finished.) This morning I woke to see that it had gone through well. I then started the process with the BOOTCAMP drives. However, before I started it gave me errors stating that I wouldn't be able to run Windows off of the Cloned BOOTCAMP drive. Question #2: Is it because of the Format type I chose when partitioning?
Info:
MacBook (13-inch Aluminum Late 2008), Mac OS X (10.7.3)
Wirelessly posted (Mozilla/5.0 (iPhone; U; CPU iPhone OS 4_1 like Mac OS X; en-us) AppleWebKit/532.9 (KHTML, like Gecko) Version/4.0.5 Mobile/8B117 Safari/6531.22.7)
So if I have 10.6 installed and want to install Windows on a Mac, how can I create a 3rd (shared) FAT32 partition without reformatting the hard drive? I know how to without reformatting, but is there any way to just split my current partition into 2? I know how to do this on Windows, that is by shrinking the partition, but is there any similar function on a Mac so I don't lost existing files?
trying to partition the drive (320 gig) to install windows 7 on. after allocating the space and setting the format to FAT32, it quits about half way and tells me partition failure. try lowering the amount of space devoted to the partition. even when shortening it I keep getting the same error.
View 6 Replies View RelatedI wanted to make a partition like this: but when I click apply, the size keeps going back to half of my hard drive. How do I get it to stay at 40.00 GB? It also shows this when I click apply, so it doesn't work anyway. How do I fix that?
Info:
MacBookPro, Mac OS X (10.7.3)
Now I have to ask what is the best way to get all my stuff on the new machine. I keep a backup on an external hd using Carbon Copy. I would like to do a clean install but I think that will be a night mere. I made a mistake when I made the boot camp windows partition by making it Fat 32.. Anyone know if I can make a new partition for windows on the new machine NFST and then copy my windows folder to it. I have it backed up using Winclone which works very well by the way.
View 5 Replies View RelatedI recently reformatted my entire drive and reinstalled Lion with the official Lion USB recovery tool/usb. Now in disk utility the Partition Layout option is greyed out and I can not seem to re partition my disk. I´ve tried repairing my disk rights but still its greyed out.
I ran a demo of iPartition and this message was flagged:
"You cannot make changes to the disk from which your system booted.
To make changes to this disk, you should either boot from an external drive, use Target Disk Mode with another Mac, or create a bootable CD/DVD." Does this mean I can only make changes with it when booting with the usb? This doesn´t make sense as it worked on the default startdisk before. Does anyone have solution?
I want to install win7 on my uMBP, but when ever I run the Boot Camp assistant and tell it to make a 60GB partition I get that Grey screen telling me to hold down the power button!
View 4 Replies View RelatedI have a new iMac 27" w OSX.6.2, 2.66ghz intel cor 15, w 4 gb RAM and a 1 tb internal HD. I have final cut xpress3.5, live type and sound track loaded onto it, besides the stuff that came with the package.
I have five separate external hard drives. Two of them are hot swap 800 enclosures for which I have 5 hot swap trays. I have about 3 tb external storage all together.
Is there any reason to partition the internal HD? I could get 4 250 gb partitions; or any other configuration. I have never done an HD partition, so I need some guidance about how to do it, if it is a good thing.
My thought is to use an external HD for scratch disc, and use one of the partions for "Time Machine" back ups. I realize that this is sort of silly, since it is still the same internal HD that is doing all of the heavy lifting for program operation. But this thing comes with 1 tb of HD space for some reason. I wonder why, if not to store something besides programs and audio render files.
I read that any 400speed external HD in a system will slow all of the faster drives. So my thought is to use only the hot swap 800 enclosures and hot swap drives with the new iMac, and leave the older 400 speed drives plugged into my iMac G5.
I could put the time machine back ups on one of the hot swap drives, but it would have to be plugged into the new iMac all of the time and I would lose the ability to drag (QT) files from that drive, to the other hot swap drive, or into the browser of FCX.
Could I set time machine to back up only on order? Then I could still use the hot swap enclosure with any one of the hot swappable drives, and use another external drive as a scratch disc and have them daisy chained into the iMac. I could back up at the end of every work session.
I am trying to create a partition on my internal HDD on 10.4.11. I have tried two ways.
Terminal way $ diskutil partitionDisk disk0s3 1 HFS+ rigantaHFS+ 15G
- That returned an error ( i would say plausible) " couldn't unmount disk for zeroing" " couldn't unmount disk (-1000) on disk0"
- i did try the same command line in single user mode but that did yield anything at all. I got the same error message.
Disk Utility (/applications/utilities/diskutility)
- I basically cannot partition my internal HDD without erasing my the entire HDD
- So my question is :"how to create another partition on my HDD, without erasing the entire HDD?"
I am using a PPC with tiger 10.4.11
PS: the reason why I am not using the disk utility on the install DVD is that I have lost them.
I bought a macbook pro off ebay it's a 15in model # A1211 and I just put a new hard drive in it. The hard drive is a seagate 500gb 7200rpm. The real question I have is that I cloned my hard drive but in disk utility I cant just move my hard drive down extend my space to fill in the empty space for my mac partition. Also my hard drive is dual boot via bootcamp with windows 7.
View 1 Replies View RelatedI have MBP 17", 2,53GHz, hdd is 250GB. I have a lot of music and pictures and quite lot movies. On the other side I have a lot mails. Is it better to make two partitions and keep them separate? What is your suggestion? If I decide to do that, do I need to remove everything from hard drive to make another partition? I never did it before on mac, but I remember that is necessary on windows.
View 5 Replies View RelatedI've always just read them, but I need specific help this time! I have a 1st generation 13" white macbook with 2gb of ram and a 2ghz processor. I upgraded my internal hard drive to a 500 gb hard drive, and when I did that - for some reason, the default partitioning table was an apple partition. Now that I'm trying to install Snow Leopard, it says I need a guid partitioning table. I've cloned everything to an external drive, and I'm ready to reformat the partition table of my internal hdd to guid, but disk utility can't unmount the disk.
View 2 Replies View Relatedmacbook ppc g4 btw. so i obtained a dmg of osx tiger, followed online tutorials to erase and format my ipod and install it there, then attempt to boot via firewire, but just go a folder icon with smiley and "?" upon reboot...so it went back to normal startup. what other methods should i use to install this dmg on this computer? i have external hd devices but all usb (g4 won't boot from usb). can i create a new partition on the internal hd and install there?
View 6 Replies View RelatedI already have an External enclosure that turned an old HDD into an external HDD (IDE to USB and a Power cable). Now, if i had an Internal DVD burner, can i plug it into my HDD enclosure and use it to burn DVDs?
I know it wont fit INSIDE the enclosure but luckily the enclosure has a back panel with all the hookups that come off completely so i could just plug it in and sit it on a desk while its in use.
I have a mirrored drive door G4 [dual 1.25 GHz] with 10.2.8. I would like to make a bootable clone of this drive on an external hard drive, to use in case this computer fails somehow.I know there is software available to do that. Are there any particular mistakes a person could make in doing this that someone here can identify and explain how to avoid?
View 3 Replies View RelatedI bought a Penryn Mac 13" last year, messed up logic board this summer with liquid damage but the HD with leopard 10.5.7 is still good. So I made the HD external by putting in an enclosure with all my music/software (I DJ). I bought a used MAc yesterday with Snow Leopard installed 10.6.1. This Mac recognizes my old external drive when plugged as a USB. BUt when I try and put that old HD in this computer, it does not recognize that HD. It displays a folder icon with a question in the centre of it. I don't want to DJ using my external drive all the time, I would like to use it internally so not worrying if the plug accidentally comes out.
View 2 Replies View RelatedI tam trying to add a 75 GB partition to my aluminum iMac's internal HD using Leopard's Disk Utility, but after 7 hours the striped bar appears not to have made any progress and still says "Modifying Partition Map". How long does this usually take? Is this normal?
View 16 Replies View RelatedI am planning to buy a 500GB laptop harddrive, put it in an enclosure, and use CarbonCopyCloner to make a bootable clone of my Mac's internal 500GB Drive. This way, if there is a problem with my internal drive, I can just swap in the cloned drive and boot from that, never missing a step. However, I am wondering if this is a good strategy. What if something else fails on my mac like the motherboard - would I be able to boot my cloned drive on another mac?
View 3 Replies View RelatedI am trying to Install Windows 7 on my macbook pro (mid-2009) and during the beginning of installation, it says that windows 7 cannot install on the boot camp partition because its not NTFS. So I had to cancel installation. Anyone know how to Make boot camp assistant partition in NTFS? or in any way so I can install windows 7?
View 4 Replies View RelatedI have a MBP 2.4 SR and windows XP 32bit is installed on Boot Camp... I would like to know if it's possible to resize the OSX partition to make it bigger... Or do I have to uninstall windows and install it again...? Because I really need the space...
Btw, is there a program that can tell me what optional leopard software (printer drivers etc.) are installed?
When I try to make another partition on my harddrive (I've already made one housing windows XP), the bootcamp utility that my mac came with only gives me the option of removing the current partition. How do I make another one?
View 3 Replies View RelatedI am using an EXTERNAL seagate 250gb drive formatted with the apple partition map on a osx10.4 system with no problems (intel based). I then plugged it into a 10.5 system (ppc system), it displayed some message which I ignored, perhaps to my peril, and began to backup some files and the transfer was moving quite slow. The drive was unplugged before the transfer was completed. I now try to use the drive on my 10.4 system and even-though the partition is still visible (in disk utility) it is not active (the drive is in black font but the partition is in grey font). Did the 10.5 system possibly make the partition inactive, if so how to do i make it active again? When I attempt to verify the disk, it reports that there is an "INVALID SIBLING LINK" and tells me that the volume needs repair. I try to repair the disc and it fails "INVALID SIBLING LINK" and the "THE UNDERLYING TASK REPORTED FAILURE ON EXIT" I would really like not to have to take this to a data recovery service and I am not tech challenged so I don't think I need to do this as the Hdd didn't fail, I hope.
View 2 Replies View Relatedits a mac mini, 160gb(148gb really) 53gb free, i want to make a 25gb partition for windows 7
View 20 Replies View RelatedI have a 50GB windows partition through bootcamp. The problem with it is that it's too small and i constantly have to uninstall games to put new ones on. How can i re-size it without backing up all my saved games, removing the partition and making a new one?
View 1 Replies View Related