MacBook :: Have A Process Sending Data To Telkomadsl?

Jul 4, 2012

I have recently discovered that a 'web' process has been sending data to an address which I have identified through VirusBarrier X6 to be "dsl-146-236-157 [URL]"   Over a 2 day period, 1,2gb was sent to this address.  I have since blocked these addresses through the virus scanner, but now I need to delete this process/es from my system.   I do not know how I got this 'process' downloaded, as it is not identified as a virus, malware, trojan etc. My research tells me that this has been seen on windows and other macs, and I want to see how to remove it. 

MacBook, Mac OS X (10.7.4)

View 2 Replies


MacBook :: My HP Printer Says 'sending Print Data' But Nothing Prints

Jun 16, 2012

I'm trying to print a legal size 4 page document. The first page printed then the printer stopped. I've tried repeatedly to print page 2, but it never gets beyond the 'sending print data'. I tried deleting the job but it didn't go away. I finally had to shut down my MacBook and the printer, then restart them and the job was gone. But I still get the 'sending print data' when I try to print page 2.

Info:MacBook, Mac OS X (10.6.8), This is not a wireless printer.

View 1 Replies View Related

PowerPC :: Finding Best Process To Get Data Transferred From Old HDD To New HDD?

May 15, 2010

I have 2 new HDs (each 1T) uninstalled, and I have my old HD (160 gigs) currently residing in one of the two slots in my G5. Any ideas on the best way/process to get the data transfered from the old HD to the new ones, leaving my two slots filled with the 2 new drives AND my data from the old HD transfered and intact, with a RAID0 setup?

OR, are there any other suggestions on a good setup with the 2 new HDs?

I'm open to suggestions.

I always back-up on external HDs, so, is their a need for me to worry about setting up a RAID0?

I'm doing video processing for DVD release.

Should I just max out the 2x1T gig HDs and not worry about a HD failure?

View 3 Replies View Related

OS X :: Computer Sending Out Data?

Jul 25, 2009

I just got a macbook pro and I installed istat in the dashboard. I noticed that my computer is sending out a lot of data, for example istat says that it is sending out 35 kbs with a total of 258 for today. My question is what is my computer sending out and should I be worried?

View 1 Replies View Related

Hardware :: AEBS Constantly Sending And Receiving Data?

Mar 10, 2009

Hey I just picked up the new AEBS and so far I'm liking it. I have istat menus installed and have the network activity showing and since connecting to my AEBS, I am constantly sending 0.1k/sec and receiving 0.3k/sec. Anyone happen to know why? It's happening on my laptop and iMac so I'm sure it's supposed to happen but the OCD in me has to know why lol. Seems like the AEBS keeps sending out data to my modem too because the ethernet light on my modem never stops now.

View 3 Replies View Related

IMac :: Printer Not Printing - Stuck On Sending Data

Jun 2, 2010

I have an HP 8000 hooked up with a USB cable. I've tried disconnecting everything, restarting, trying different ports, nothing is working. I also tried resetting the print system in system prefs, reinstalling the drivers as well. When I try to print the printer just sits there. Its always stuck on sending print data. I don't use this printer often but it used to work and I would get this problem once or twice every few months. I solved it just by restarting but now it wont go away.

View 7 Replies View Related

OS X :: Re Fsck-hfs Process At Start Up - How To Disable Speed Up Process

Sep 21, 2009

I have a Mac Pro with several raid array and single drives attached (1x Wiebetech RTX600 Raid 5 through SCSI; 1x CalDigit HDElement Raid 5 through miniSAS; 4x internal drives).Unfortunately, due to various reasons (electricity outtage and software crashes), I'm experiencing system crashes and need to hard re-start the system. Upon restart, I am able to boot back into Mac OS X, but sometimes one, or both of the raid arrays will not mount.However, after a period of 0.5 - 2 hours, the array would magically re-appear again. Sometimes this might even happen to internal drives that I had mounted inside the chassis of the Mac Pro.

View 2 Replies View Related

OS X :: Good Process Explorer Equivalent - Monitor Process CPU And RAM

Feb 26, 2010

I am wondering if anyone knows of a good osx based alternative to Process Explorer on windows - what I'd like to be able to do is graph CPU and memory for a specific process and ideally see what network connections a specific process has open. atMonitor seems to do this pretty well generally, but not for specific processes (this is for monitoring a multiplayer flash game).

View 3 Replies View Related

Applications :: Logic Express 9 Not Sending MIDI Data To External MIDI Devices?

Mar 13, 2010

I just recently purchased Logic Express 9. I am having difficulty getting the application to play my external MIDI gear.

I selected the appropriate track type (external MIDI), then selected from the library a MIDI device and channel. Logic sees the MIDI devices that I configured through Apple's "�Audio/MIDI interface� app".

This is my setup�

Logic Express is installed on an iMac with 4GB Memory running the latest version of MAC OS 10.x Snow Leopard.

I�m using a Motu Fastlane 2x2 MIDI Interface with Motu�s latest driver installed.

Connected to the Port A input of the Fastlane is a Yamaha P-80 that I am using as a MIDI controller and whose sounds I also want to use. Connected to the two output MIDI ports of the Fastlane are the Yamaha P-80 and a Roland JD990 MIDI synth module. In are correctly routed to outs and vice versa.

The Fastlane is recognized by the MAC computer. Also Logic Express sees the instruments I configured within the Apple�s �Audio/MIDI interface� app.

I am able to use the P-80 keyboard to record MIDI data to Logic Express for either an internal instrument track or an external MIDI track. The soft synths in the internal tracks play with no problem. For an External MIDI track, I see the data in the Piano roll view. When I play the track, no sound comes out but I see the output MIDI data indicated at the bottom of the arrangement window. Also my external MIDI gear�s audio outs are patched into an audio mixer connected to powered monitor speakers. So I would definitely hear the devices if they were receiving MIDI information. The MIDI indicator lights on the external devices are not flashing when Logic is playing back the data.

So obviously I have an output communication issue. Either something is not set properly within the Logic software or the �Audio/MIDI interface� app.

When I open up the �Audio/MIDI interface� app and click on test. I am able to here the tone when I press the keyboard which indicates the Motu Interface is receiving data from the keyboard. However, when I click on the port�s output arrow that is supposed to send a tone to the MIDI instruments, I hear nothing which is consistent with what is happening within Logic.

I know the Motu Fastlane works because I used it for a long time in a Windows based system. I have checked each wire and they check out as well. I have checked and double checked each connection and they are set properly. At this point, I am not sure what to do to correct this problem.

View 1 Replies View Related

MacBook Pro :: Data Transfer As Itunes Music - Some Data Compiled In To Single Folder?

May 27, 2010

i just got a new macbook pro 13" laptop and am trying to transfer my itunes music as well as some data i have compiled into a single folder from my (2005) Powerbook G4 12" laptop. Please help me out with this i have no idea how to do this and the Apple Store said they will do it for $100 and i just poured every penny i own into this computer and cannot sell me old computer to pay bills until i transfer this data.

View 5 Replies View Related

MacBook Pro :: Lost Data From Broken Hard Drive / How To Retrieve Data

Dec 10, 2014

I have lost all my data from my harts drive. The laptop is under warranty. I have been told that they have replaced my hard drive but could not get any data off the old one. I have now lost all my data, photos, files, music etc. NO backups, only simply because i did not know how to do them. Is there any way of getting the files back? All my work spreadsheets and accounts were also lost.

MacBook Pro (13-inch Mid 2012)

View 7 Replies View Related

MacBook Pro :: Process That Cannot Be 'killed'

Mar 31, 2012

There is a process, "PocketCloudService" that I cannot finish even from terminal (kill PID), the response is "Operation not permitted". I did the same of killing proceses from terminal and it worked, but it doesn't with this process. It belonged to a program that I unistalled, "Pocket Cloud". I reinstalled that program and unistalled again, but the process continues running, even if I restart the mac. It's annoying because sometimes it spends about 80% CPU, warming my mac (and my patience!), therefore I finish the process "PocketCloudService" from Activity Monitor, but it restarts few seconds after. I just want to delete or block the source that launches that process and not have to stop it manually anymore.From activity monitor when I check the process, the main process is "launchd (1)", user: root (0)

Mac Pro, Mac OS X (10.6.8)

View 3 Replies View Related

MacBook Pro :: Any Way To Speed Up Burning DVD Process

May 14, 2010

How long does it usually take to burn a movie (approx 700mb - 1GB lasting roughly 2hours) on a new macbook pro 13" ? My friend has an macbook alu and she said it took her 6 hours to burn a movie. We have a hunk a junk PC with a DVD burner and took 2 hours to burn a DVD. Anyway I can speed things up?

View 4 Replies View Related

MacBook Air :: How To Stop A Download In Process

Jun 4, 2014

Ive just started to download a data analysis program on my Mac, but have since changed my mind and no longer want the program on my Mac .

I have paused it, but it was about 3 minutes into a 10 minute download. 

Does this mean that I have stopped the download and there will be no change to my computer?

Also, do I need to remove it?

MacBook Air

View 1 Replies View Related

MacBook Air :: What Sort Of Delays Would I Be Seeing In The Streaming Process

Jan 27, 2009

I reviewed the guide about saving your media on a external drive and accessing it via the Internet and successfully set that up. I have about 700 GBs of space available on that all setup through my AEBS. Would it be possible to store my media (music/movies) on that and stream them from there when I am remotely (i.e. at work, starbucks, etc...). What sort of delays would I be seeing in the streaming process? My connection at home is roughly 7 down and 1.5 upload.

View 1 Replies View Related

MacBook Pro :: When Using CS5.5 Lion Freezes During Save Process

Feb 6, 2012

I upgraded to Lion this past fall and haven't had problems until recently, but now Lion freezes everytime I try to save a file in CS5.5. Is anyone else having this problem or has found a way to resolve it? Do I need to reinstall Snow Leopard?

Info:MacBookPro, Mac OS X (10.7.2)

View 2 Replies View Related

MacBook Pro :: What Is The Best Process For Displaying Screen On HDTV

Mar 25, 2012

what is the best process for displaying my screen on an HDTV?

macbook pro, Mac OS X (10.6.6), 250 gig solid state drive

View 2 Replies View Related

MacBook Pro :: Report Crash Process Using Over 100 Percent Of CPU

Mar 28, 2012

For the past few days my macbook pro (lion 10.7.3) has been overheating and the fan has been going crazy.In my processes, there is one called "report crash" that is consistently using between 50% and 180% of the CPU. I force quit it, but it just comes back straight away.I looked into my logs to see what is causing it and there seems to be a continual launch/crash cycle related to, whatever that is.Does anyone have a clue why the midiserver is fighting to be launched ad infinitum and causing my mac to go berserk?

MacBook Pro, Mac OS X (10.7.2)

View 14 Replies View Related

MacBook :: Frozen By Quitting A Startup Process?

Apr 29, 2012

In cleaning startup apps, I deleted something and now have my screensaver and nothing else.  Needed ideas a noobie can follow.

MacBook, Mac OS X (10.6.7), iphone, ipad

View 2 Replies View Related

MacBook Pro :: Intercheck Process Taking 100%  Of Processor?

May 2, 2012

I have a dual-core MBP, and when i try to run programs like mail, word, and firefox at the same time, the Intercheck process decides to take a lot of my CPU.  Whenever this happens, i have to restart my computer, and if i don't, it will eventually freeze. 

MacBook Pro (13-inch Mid 2009), Mac OS X (10.7.3)

View 1 Replies View Related

MacBook :: No Process Is Taking Too Much Memory, Still There Are Only 12 MB Free

May 13, 2012

No process is taking too much memory. Still there are only 12 MB free? 

MacBook, Mac OS X (10.7.2), 2.26 ghz, 4 gb ram

View 3 Replies View Related

MacBook Pro :: Update Failed At End Of Process - Could Not Be Verified

Jul 1, 2012

Every time it shows in the end of process that update is failed. The update could not be verified. It may have been corrupted during downloading. The update will be downloaded and checked again the next time that Software Update runs. I have MacBook Pro 13 inches with Mac OS 01.7.2.

MacBook Pro, Mac OS X (10.7.2)

View 2 Replies View Related

MacBook Pro :: OS X Mavericks (10.9.4) Not Able To Complete Burning Process

Sep 1, 2014

I have not been able to compete a burn process

MacBook Pro, OS X Mavericks (10.9.4)

View 1 Replies View Related

MacBook Pro :: Would Not Process Exporting Of File From Final Cut?

Dec 9, 2014

I Was using Final Cut Pro X and Safari, and my computer would not process my exporting of a file from Final Cut. So, I tried restarting it.... It froze and I held down the power button, shut it down and turned it on when.... The apple logo appears with spinning circle, and then I get a circle with a slash and Apple logo disappears.

I have a Late 2011 MacBook Pro 15.4" 2.2ghz i7 quad core 8Gb ram  500gb 7200rpm HDD OS X 10.9.5.

MacBook Pro, OS X Mavericks (10.9.5)

View 8 Replies View Related

MacBook Pro :: Hangs On Boot Process After Win7 Install

Jul 6, 2009

I have a (check sig) and just tried to install the Windows 7 RC 64-Bit onto a Bootcamp Partition. I had been using the Beta way back, but had cleared that partition in advance for a clean install. With that I had no problems...ran the 7 beta fine alongside OSX. I followed the same procedure I had done for the beta install with RC, following the guide on the internet. Everything seemed to work out peachy, Windows 7 booted fine, I added all my settings again. Then I switched over to OSX to eject the disc, which was fine although the boot in was quite sluggish. I set the boot drive as "Macintosh HD" in System Prefs, and proceeded to try to boot into Windows 7 again....this time it was no go.

The screen came up with the white cursor on black, and then the "Starting Windows" showed, with the animation above it. At some point during the animation, it just froze. My fans were at normal speed and everything. I tried many times, same story. So I thought I would shut down, boot into OSX, and try to erase the partition. That didn't work either. When booting into OSX, the start-up chime sounds with the white screen, then the gray Apple logo shows up....and that's where it stays. I reset the PRAM, no luck. What could be the reason it hangs on BOTH boot processes? Because for a short time they did both work, and I could not have erased my OSX partition or anything because I did boot into it once after installing the Win7 RC. I also can see both partitions when I boot holding Option...

View 2 Replies View Related

MacBook Air :: System Will Not Restart After Software Update Process

Aug 5, 2009

I was doing the most recent software update today. During the process, it told me to power down. I did and now when I turn on the MBA, I'm only getting a black screen. I have tried a force restart (control-command-power), PRAM reset (command-option-P-R), and the SMC Reset (Shift-Control-Option Power). None of these steps corrected the problem. How I can get my MBA to boot?

View 11 Replies View Related

MacBook Pro :: Remove System Process From Loading Boot?

Aug 11, 2009

I'm trying to remove "WDNotifier" from ever loading when I boot. Can someone direct me where to do this?

View 8 Replies View Related

MacBook Pro :: Start Up And Drain Before Beginning The Calibration Process?

Aug 11, 2009

New 17" arrived today.

Looking to care for the battery from day one - should I start her up and drain before beginning the callibration process, or charge before starting up?

I've read this [URL] but it doesn't really highlight if I should drain the battery first or not.

View 2 Replies View Related

MacBook Pro :: Core Duo 3GB RAM / Firmware Flashing Process Work?

Oct 14, 2009

I know that the RAM limit in the MacBook Pro is 2GB. However, this is most definitely not due to hardware limitations. Technically speaking, the CPU and chipset can address up to 3.3GB RAM. I also know that the computer won't boot with more than 2GB in it. I have reason to believe that this is therefore a firmware limitation. Has anybody done any work modding MacBook firmware? I am considering working on this myself, but if anybody has information about how the firmware flashing process works, that would be quite useful. I also would particularly like to know if Apple firmware updates are signed or if anything can be flash into ROM.

View 3 Replies View Related

MacBook Pro :: Iphoto Won't Share To Facebook - Process Gets Stuck

Jun 25, 2012

There was a recent update to IPhoto and since then I can't share a photo to Facebook. The program gets stuck

MacBook Pro

View 1 Replies View Related

Copyrights 2005-15, All rights reserved