MacBook :: Cursor Moves Erratically And Screen Gets Bigger And Smaller Without Touching The Trackpad?
Dec 5, 2014
Just recently my cursor started moving erratically and it's difficult to click where intended. The screen gets big and small without my touching the trackpad. What's wrong - is it a virus or a malfunction in the trackpad? I have an OS X 10.9.5
My trackpad shows no visible change, however my cursur moves on its own, clicks on things, drags icons, and at other times refuses to move. Sometimes for a moment it will work, but then it is back again. I highly suspect malware. My computer worked fine, there is no sign of hardware damage and I reset my Pram.
Info:MacBook Pro (13-inch Mid 2010), Mac OS X (10.6.6)
I have been trying to do some research on this, but it seems so specific, and all the trackpad stuff is about the ones on the new macbook line. I have a MacBook that I got towards the end of 2006. Here is a link to the tech specs. I have the 2.0Ghz one. http://support.apple.com/kb/SP23
As soon as I turn on my computer, if I use the built in trackpad and mouse, I can move the cursor around, and the keyboard still works, but if I try to click anything by either tapping the trackpad or hitting the buttons, it won't click. However, if I shut the computer down and plug in a USB mouse and then restart the computer, the USB mouse works. If I even slightly brush the trackpad or hit the mouse button on the computer, the USB mouse will stop working and I have to restart again.
My adorable cat Ari, decided to sit on the keyboard of my ibook and now I have what I can only describe as a "floating desktop"--the entire screen floats or moves with every move of the cursor. Cursor to the right, page moves left, cursor up, page down. While his entire bottom was on about half of the keyboard, he seemed to be mostly on the volume key, because I could hear the blip, blip, sound that key makes.
I have a 4 month brand-new macbook pro which is not heavily used at all, one day my trackpad is working fine, today it is moving around extremely erratically, switching from screen to screen, going to mission control with only one finger swipe etc. I cannot use it at all, I have to use a plug-in mouse. I have checked all my rpeferences for trackpad and nothing has changed. How do I fix this?
Info: MacBook Pro (15-inch Late 2011), Mac OS X (10.7.3), Trackpad
I have a MacBook pro purchased in 2009. After it is on a while the cursor starts jumping around like someone is in the computer and looking. It changes preferences. It won't stop till shut down.
I have snow leopard. I have a 1TB time machine set up. After all I just realize that it is too big for what I actually need. I think half of that would be more than enough. I have another 500GB hard drive. I was wondering how can I move my time machine files from a Bigger hard drive to a smaller hard drive.
All discussions, post and forums explain how to do it from smaller to a bigger hard drive using Disk utility. But that did not work for me, there is a error saying that the source is bigger than the destination. Does anybody know how can do this? basically using the apple computer and trying to avoid 3rd party software.PS, The back-up file inside the 1 TB hard drive is much less than 500 GB.
Every time a menu pops up asking me to choose yes or no, the mouse automatically moves to the yes like it's ready for me to click. I'm pretty sure I set it to do this a while ago, but I forgot how to change it back. It's late, I'm frustrated, and this is bothering me. A few searches didn't get me anywhere. Anyone know what I'm talking about and/or how to change it back?
I have a problem with scrolling using the trackpad. It is somehow inverted: when I scroll down, the page moves down (so it follows the content, just like the iPhone). But I want to have it back the way it was. Is that possible?
When I try to run an app which requires Rosetta, the install Rosetta dialog box appears which is fine. However, the cursor automatically actually moves to the dialog box and positions itself right above the Install button. It doesn't actually click it but it kinda freaked me out to see it happen.
Not familiar with the mac at all, as this post will demonstrate On the desktop, the background is now expanded and when you move the cursor, it navigates by an annoying combination moving the cursor and moving the background until an icon is under the arrow. I screwed around with the display and some other preferences, but i cant figure out which setting I need to modify to get it back to a static background (of normal size) and a cursor that moves to an icon.
My computer screen is skipping and switching erratically between sites/functions. Sometimes it just switches to a grey dashboard screen. Has anyone had this problem?
When I got my MacBook a few weeks back it had a faulty disc drive and subsequently got replaced to the MacBook I have now. Getting back to the point on both this macbook and the first macbook I had it had a strange issue, where sometimes the trackpad cursor would freeze for a few seconds even though I'm moving my finger over the trackpad still. It would occur more often when I have my leftside-finger on the bottom left of the corner and tracking with the my rightside-finger as you would a usual notebook...it happens quite frequently.
I have a Macbook Pro, running Snow Leopard and from time to time my mousecursor just disappears. It's not while I'm typing but when i just hover over the screen. This happens especially when using iPhoto and Safara but also with some other applications. The cursor usually appears again when I move it over the dock and back into the application but it's kind of annoying.
The trackpad/cursor on my Macbook Pro vs10.6.8 acts stangely. Sometime the cursor jumps around randomly and can't get any response from the trackpad. The condition is getting worse and has about made the trackpad useless. I have tried using as wireless mouse and have had no problems whatsoever, which leads me to believe the problem is in fact in the trackpad/cursor; either the hardware or softeare associated with same.
I just got a MacBook Pro, and the button being part of the trackpads touch area is cusing me problems. Freuently when I go to click the button it moves the cursor slightly causing the click to be in the wrong place.Â
Is there a way to turn off the lower area of the trackpad or something? Can I replace it with a trackpad with a seperate button?
Just bought a brand new 15" MBP, and immediately after unboxing the screen brightness seems to just move/adjust without adjusting via brightness buttons.
I have a Macbook pro 2010, Lion OS. It has been working good until I conected the computer to a TV. I´m conecting my computer, frecuently, to some televisions. The last time I did that the configuration of my screen changed a little bit. The screen looks bigger than my display and I can´t see the hole screen at the same time, I have to move the arrow with the trackpad in order to see some corner of the computer. I tried to fixed going to the display preferences
Info:MacBook Pro (13-inch Mid 2010), Mac OS X (10.7.4)
The thing is that recently at random times throughout my day when I'm, using my Mac...my finger will be on the glass trackpad and i'll be doing something like say surfing the web or using w/e application...Well, randomly the mouse on the screen will disappear from its current location, say for example on Firefox's toolbar, immediately to the bottom of the screen. It's never the top of the screen, or the sides since it normally just causes the dock to rise up...
I'm really concerned to see what's going on here. I rarely had this problem with my old Whitebook, though admittedely did happen a few times.
Perhaps a water spill/damage? Though consider to have been very careful with my new Mac. I'm sure the glass trackpad on these new Macbook Pro's has water damage sensors right? Anyway I can see it/observe it myself.
I used to love taking apart my old whitebook but these new MBP's seem impossible; that or i'm just too scared since I do love how the machine was built.
i have a 13 inch macbook pro, and i want to set the screen size bigger than 1280 * 800, to maybe 1600 * 1200 or something. obviously i cant fit more than 1280 * 800 pixels in the 13 inch MBP screen, but I want it to function as kind of a 'cropped' screen - so i'd have to move my trackpad around the corners of the screen to see more of the desktop. i know it will look like crap and be a bit cumbersome, but i don't really care about that. is there any way to do this?
by the way, i don't NEED the ability to use my trackpad to move around the screen. i don't plan on using my MBP like this permanently, this is just for experimental purposes.
I got a Matte screen 2010 MBP. It comes with higher res screen. I personally find the text to be a little bit too small for my liking. Is it possible to uniformly make everything bigger so the higher res only make image and text sharper and not smaller than original resolution?
I've spilled a tiny amount of water on my trackpad (drops of sweat from a glass, so not much at all) and now the trackpad isn't working. The cursor is delayed and inaccurate and reminds me of windshield wipers on a dry windshield in that it bounces across the screen. Also, the menu of a right click keeps popping up but I haven't right clicked. Is there any way that I can dry under the trackpad? Can I take the trackpad off? I have a 13" unibody. I did fold paper towels in half and stuck them in the cracks between the trackpad and the wrist rest and that did get some water up, but there is either still water under there or permanent damage. I'm not very tech-savy, so I'd rather not take the whole thing apart on my own, but it is work issued and I'd have to take it to them before I can take it to an Apple store.