MacBook :: Wont Start Everytime, Just Clicks And Flashes The Light?
Jun 26, 2012
My Macbook Pro does not always turn on first time, it takes awhile to click on, it just clicks every time I try to turn it on, It turns on when its warm though, it also turns off when I close the lid, but the light says it is on, after leaving the lid closed for more then 5 minutes, and I open the lid it is turned off? I do not understand what is cuasing the problem?
my Macbook (I believe a 2008 model wouldn't wake up from it's sleep like it does every time I open it (I usually set it to sleep rather than shut it down). I turned it off manually, but when I attempted reboot it does either one of two things:
a) When I simply press the power on button, the screen stays black and the sleep light fades on once, but then fades off and all mechanical sounds abruptly stop. b) When I press and hold the power button, the sleep light fades on, but then flashes about 10 times rapidly before fading in and once again abruptly turning off.
I have tried this with the charger plugged in several different outlets, not plugged into the Macbook, waiting, removing and putting back the battery. A Google search said it might have something to do with the RAM and pushing it back in, but I have no idea how to do that.
i just got my MBA on monday and now the magsafe adaptor doesn't work anymore, it flashes green light and does not charge. Does anyone know what's wrong with it?
The iMac G5 (17") doesn't want to boot up, when I press the I/O button it flashes with its white light, and then nothing happens. When I do that with the back-cover off light 1 is lit as long as the machine has power, but light 2 only flashes when I connect the pins that the powerbutton connects. I know that there was a problem with the powersupply, but the soldering I did should have fixed that.
I have a Mac Pro that recently started doing the strangest thing. when you go to power it on, it just clicks. If you unplug the USB keyboard, mouse, and cable going to the usb hub built-in to the monitor, then start it up, it starts up normally.
Im not sure why but when i first turn on my macbook a very fast pop up comes on and goes away. It has been happening ever since i turned my firewall on last week after realizing it was somehow off.
i have tried to take a picture and video to read the pop up but it fashes so fast i can read it. it looks like a allow/deny request. I was not able to find out what it was online.
I have a 30-inch cinema display and a Power Mac G5 (quad). Last night I was toying around by trying to boot an old 450 MHz G4 connected to my G5 via firewire ( I need to do some work on the G4 and it doesn't support my big display). So I connected it to my G5 via firewire target disk mode, then selected the disc (which has 10.2 on it) in the Startup disk preferences via System Prefs. Then I tried it and got a kernel panic. Alright, so it didn't work. Oh well. But now that everything is disconnected and my G5 is back to it's normal state (meaning the G4 isn't connected at all), when I start up, my display acts very weird. I get a few flashing colors blocks at the beginning, then it blacks out. Then when I login, it goes black again, then pops back on. So I'm trying to figure out what I did to my baby and how to fix it.
Information: Quad-core 2.5 G5 Mac OS X (10.5.1) 30" Apple Cinema Display
My friend's MacBook Air crashed. It blacked out, and turned off. Now, when he presses the power button, he gets a beep, and that's it. the white LED light also doesn't flash. It's a short, soft beep.
I've got a nasty issue with my 13-mo. old MacBook.
I'm pretty sure it's a dead logic board and possibly a dead hard drive, which I really, really, really hope not as I don't have backups of everything on the drive. I just upgraded to Leopard this past week and did a clean install so not all of my stuff is setup yet.
Power adapter and battery are inserted. All 3rd party peripherals and RAM have been removed.
MacBook does not chime at boot. The screen flickers, but stays black. If I hold down the power button then try to let it boot the light on the front right flashes constantly (like when it's sleeping but a faster pace), like a turn signal on a car. I can hear the cd-rom drive whining but everything else is dead silent.
I've done everything here with the exception of calling Apple.[URL]
I've also tried FW Target Disk Mode, but the MacBook drive does not show up.
I've done everything I can think of and I'm out of ideas at this point.
Additionally, there's a cd-rom (Tiger Restore CD) stuck in the drive. Holding down the mouse button during restart does not eject this CD. Where is the force eject button (I see no pinhole)?
I have business documents, emails, etc. that I HAVE TO get off this hard drive. How can I do it? I don't have a 2.5" drive enclosure but if that will solve the situation I will pick one up asap.
This morning, I synced my iPod with my MacBook and upon completion and permission to disconnect the device, I pulled out the USB cord. At that point the computer instantly turned itself off, and when I hit the power button, I could hear the system trying to start up, but the screen remained black and the sleep light glowed continuously. I unplugged the charger, took out the battery and put it back in, and tried all the troubleshooting tips under the Apple Support guide with no success. I also discovered that when I closed the laptop while it was "on," it would seem to boot up a little more before returning to the black screen. I left it alone for a few hours, and when I tried again to turn it on, it booted up normally and as I was searching for updates, it shut down again as it had earlier.
Does anyone have anything for me to try? I don't want to have to take it into a shop because I can just barely afford to, but I need this computer! Any suggestions would be greatly appreciated :-)
I have a G5 Dual 2.5 and the power light on the front (white) is lit but nothing happens when I press the power button. I was trying to reset the PRAM manually by pulling the battery and inplugging the unit because my startup shortcut keys were not working. I had seen it recommended to reset it by pulling the battery and reinstalling in other threads. I put the battery back after about 15 sec and plugged in back in. Now it wont start up.
I'm a relatively new Mac user. In fact, I haven't had that much experience at all. I work in a donations store and today we got a donation of an iMac. I searched around a bit and I'm sure it's a G5 model. It looks like [URL]. It looks to be in great condition, no scratches, not even a fingerprint on the monitor.
However, when I turned it on, after plugging the power chord in, I started experiencing problems. The fans kicked on and I heard the chime (I assume that was a post?) but I was getting no video and the white LED on the front of the screen was flashing on and off. The exact pattern is strange - I don't think I've see it before. It flashes once, then stops, then flashes again, then stops. Over and over. No sequence. :| The computer did not come with a keyboard or a mouse. I was testing it to see if it actually worked, before I bought the keyboard and the mouse, so I'm wondering if it has something to do with that? I'm not really sure.
I recently received a Power Mac G5 from work. They told me I could have it, but reformatting the hard drive and reinstalling the OS was on me. So, I took it home, and plugged it in to turn it on, and the white light on the front blinks 3 times and then stays steady... and then blinks 3 times again... and so on and so on.
The RAM that came with it was bad, so I put in 2, 1 GB PC3200 sticks in it. Isn't it a RAM problem?
I have an iMac G5 iSight. When the power button is pressed there is no sound and a white light flashes, but nothing else happens. I tried the power reset method and replaced the power supply, but the same thing happens. The white light just keeps flashing.
When I am in a quiet room, I notice a light humming coming from my macbook pro and also a light vibration on the right side. Is this just the hd spinning or something to be concerned about? it is 2 weeks old.
I was wondering what you do to get the oil smudges off of your blackbooks body? I cant seem to get them off. I have tried some lysol wipes which helped, but not much. I dont want to use gloves everytime I use my Mac
Sometimes in ALL programs (so far) I am not able to click certain stuff. For example, when I'm in Safari (4.0) I try to click a link but nothing happens. It shows me the clicking finger thing and I am able to scroll (I can not use the two finger scroll on the trackpad only the sidebar) and I am able to move the window around. I have found that I can fix it sort of by clicking the link millions of times. Oh also I can not right click the link but I can right click everywhere else.
I thought maybe it might be some of my 3rd party software but I doubt it. The only things I have installed are geekTool and this Cleardock replacement called Mirage.
I have a Macbook All of a sudden this morning my cursor does not actually select what I hover over. For example: to creat a new tab in my browser, I can't actually click on the "+" symbol to get a new untitled tab, I have to click about 1/4" to the right of the "+" sign to select it. This occurs with everything -- typing into text boxes, clicking "compose" to write a new email in Gmail -- everything! This is really annoying, it occurs when I click the mouse button and also when I tap on the track pad. (Clicking through this paragraph to edit this question has been a nightmare!
I got a MBP just last month, the battery capacity has decreased to 97%.
However, recently, when I turn my MBP on and I check Coconut Battery, the battery capacity remains at 97% but my battery charge is only at 20%. And I kind of leave my MBP plugged in all the time usually at 100% charge, I have no idea why the battery charge keeps dropping and if this is normal.
As in after I charge it up, turn it off overnight, turn it on the next morning, the battery charge is only 20% and it doesn't charge until I unplug it and plug it in again.
My wireless will work for random amounts of time then suddenly start flashing on and off. For awhile it won't recognize any networks then find them. I choose my network and again it flashes on and off.