MacBook :: Volume Structure Failed When Ran TechTool Deluxe

Apr 4, 2008

I ran TechTool Deluxe and noticed that the volume structure failed. Not sure what this means... can anyone shed some light on this?

View 12 Replies


ADVERTISEMENT

MacBook Pro :: Surface Scan SSD Using Techtool Deluxe Provided With Applecare?

Oct 12, 2010

Like the title states. i have a 256 GB Apple SSD and i wanted to run techtools to see if everythign was up to par. i wanted to know f a surface scan will harm or is even necessary?

View 2 Replies View Related

Applications :: Can't Find Techtool Deluxe

Nov 26, 2009

I've tried looking on my applications dvd and install dvd, Dont see it listed.

Anyone got any ideas? Before I download from the apple support site and burn to dvd.

View 3 Replies View Related

Desktops :: Disk Repair - Volume Structure Failed

Feb 11, 2010

I have recently purchased an iMac (21.5" - 3.06 GHz Intel Core 2 Duo - 4 GB 1067 MHz RAM - 1 TB harddrive) with OS X 10.6.2 installed. I have to say that after over 20 years with MicroSoft I am enjoying the stability and quality of the MAC. Anyway, as part of my education in the care and feeding of a MAC I ran the TechTool app yesterday. I had no indication that anything was wrong with the computer - but, I would like to become familiar with the various utilities for the care of the machine "before" a problem occurs. As the app ran I was pleased to see that all the tests passed (Processor, RAM, Video RAM, etc.). However the computer failed the last test: Volume Structure.

Here are the directions I was given at the end of the test: Volume Structure Failed
TechTool Deluxe can scan volumes for problems related to the numerous structures that are necessary for the volumes to operate correctly. If problems are found, TechTool Deluxe can attempt to repair the damage to help reduce the chance of future problems. If TechTool Deluxe has discovered problems with the structure of a volume, allow the program to repair the problem. Quite often these issues are minor, but sometimes they can be indicative of a more serious problem. If the problem persists, consider backing up the device, reformatting the media, replacing the data, and then testing again.

I was also instructed to access the Apple site and download the most recent version of TechTool Deluxe that can perform repairs. I downloaded the software and followed the instructions to open the file in the Disk Utility app and burn a CD. Following the directions I then booted up on the CD by restarting the computer while holding the "C" key. The computer booted up on the CD and loaded TechTool Deluxe. I ran the same tests as above and once again the Volume Structure failed. When I clicked on repair it seemed as though the program was trying to fix the problem - then it abruptly stopped and stated that the Volume Structure could not be repaired.

I removed the TechTool CD, rebooted the computer, installed the TechTool Deluxe that I downloaded from Apple, and ran the Disk Utility. When I tried to "Verify" the disk this is what appeared: Disk Utility stopped verifying "Macintosh HD". This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk. Following these instructions I rebooted the computer using the Mac OS X installation disk - and the only option I found was for an installation of the OS.

View 5 Replies View Related

IMac :: Volume Structure Still Failing After Five Repairs

Mar 21, 2009

my iMac has been running strong for about 9 months now. The only gripe i have had is that is has begun to get SLOW booting up and mundane tasks such as opening apps. iTunes takes a good minute to get up and going. I never even noticed the slowness until i got a MacBook with much worse specs that blew it away.

So I decided to run TechTool Deluxe and see what happened. My iMac did great until the Volume Structure. I repaired it a good five times. The last two times it couldn't find anything to fix and it is still failing!

I don't want to have to buy DiscWarrior (i think thats right), or reformat my drive, mainly because i haven't the foggiest on how to do that. Any options available to me besides these? And do you think the slowness is more due to a growing amount of files, or maybe even a *virus* *gasp*, or to the failing structure?

View 1 Replies View Related

IMac (Intel) :: Partition Failed With Error - Wiping Volume Data To Prevent Future Accidental Probing Failed

Aug 21, 2014

I recently received an iMac as a "gift"... turns out it has some problems. I am unable to reinstall the default OS (Mountain Lion) because I have yet to be able to partition the HDD correctly. The error I keep getting is: Partition failed with the error: Wiping volume data to prevent future accidental probing failed.At this point, the default Macintosh HD isn't showing, so it must of been erased/deleted. 

Info:
iMac

View 3 Replies View Related

MacBook :: Verify Volume Failed - Invalid Request

Dec 17, 2010

I've had this 750 GB external drive for a year or two now, and have used it with no problems. All of a sudden, it can't be read by my MacBook. Finder can't see it. No applications can see it except Disk Utility. But DU can't repair it, and when I try verifying I just get "Verify volume failed: Invalid request." Also, when I'm using DU normally, I can't even eject the drive. But if I boot from my Mac disc, I can. But that's the only difference; still no repairing or verifying, and I get the same error message.

View 8 Replies View Related

PowerPC :: Hard Drive Not Working / Repair Volume Failed Could Not Unmount Disk

Jul 17, 2009

So so annoyed right now. Today my 12" G4 powerbook started to become slow, lots of spinning wheel, delayed menus etc. I checked file permissions, rebooted and it just kept on getting slower. Eventually it wouldn't get past the white apple screen.

I booted off the Tiger DVD and ran disk utility to fix and repair permissions again. It wouldn't let me repair the disk as I kept getting this error:

'Repair volume failed with error could not unmount disk'

I had to reboot again, and eventually my hard disk no longer appears in Disk Utility. I tried to boot into safe mode and get this:

'"I0ATAController device blocking bus
I0ATAController device blocking bus
I0ATAController device blocking bus
I0ATAController device blocking bus
I0ATAController device blocking bus"

So now I pretty much can't do anything with it. Failed Hard Drive?

View 5 Replies View Related

OS X Mountain Lion :: Volume Erase Failed - Media Kit Reports Not Enough Space On Device

Jun 20, 2014

I was having problems with the external drive where I store my Time Machine backups, so I tried plugging and unplugging the drive but could not mount the drive. I ran Disk Utility and tried to verify the disk, which told me the disk needed to be repaired. I tried to repair the disk only to get an error message that Disk Utility could not repair the disk and it needed to be reformatted. So I tried to erase the disk with Disk Utility only to get the error message "Volume erase failed: Media kit reports not enough space on this device for requested operation". I am not sure what else to try at this point and could not find any similar questions here.  

The drive in question is a 3TB USB Seagate Backup + Desk Media, formatted as Mac OS Extended (Journaled). It's divided into two partitions, one of which (2.2 TB) holds only Time Machine backups of my desktop and laptop and the other of which (800GB) is formatted similarly with some files stored on it. I was able to verify and repair this other partition. I'm running Disk Utility 13 on an iMac (2.8 GHz Intel Core 2 Duo) running OSX 10.8.5 ...

View 2 Replies View Related

Applications :: TechTools Deluxe Won't Install?

Jun 18, 2008

I've got a June 2007 revision MBP. I just got AppleCare. Techtools won't install. It just sits on "Items Remaining to Install: 0" and It's "Searching Macintosh HD" It's been sitting there like that for hours..

View 8 Replies View Related

Applications :: How To Create Rar With Stuffit Deluxe

Apr 27, 2009

I need to create a split archive of a file over 1GB for posting on my blog. I'd like it to be in RAR format so that both Mac and PC users can access it. I heard I could do it with Stuffit Deluxe so I bought it and now I'm seeing no such option. Neither to create split archives or to create RAR archives, let alone both.

Does anyone know how to do this with Stuffit Deluxe? If not, can you suggest another software?

View 4 Replies View Related

OS X V10.7 Lion :: Getting A Mac Version Of Photo Explosion Deluxe 3.0 Or 4.0?

Apr 21, 2012

Is there a mac version of photo explosion deluxe 3.0 or 4.0?

Info:
iMac, Mac OS X (10.7.3)

View 1 Replies View Related

MacBook Pro :: Error Of Invalid Node Structure

Mar 16, 2012

I have an error of invalid node structure. Can I save my data from my hard drive? Is it even fixable?

View 4 Replies View Related

MacBook :: Invalid Node Structure / Computer Running Slow?

Jun 11, 2012

I recently dropped my even a couple of drops of diet coke near the DVD drive of my MacBook (2009).Turned it off immediately and turned it upside down for a bit. Tune it back on and it worked fine. However, the second time I turned it on it wouldn't go past the login screen. Turned it off as then on again, and started up fine. Ran a disc diagnostic and it gave me the invalid node structure message. From there it started to run slow so I shut it off again. Haven't turned it on since. I'm thinking of taking it in to a shop since I don't want to mess with it anymore.Is there any easy fix to this? If my hard drive is messed up, can I recover my data?

Info:
MacBook, Mac OS X (10.6.4)

View 1 Replies View Related

MacBook :: Doesn't Boot, Disk0s2 - I/O Error, Invalid Node Structure

May 10, 2010

I'm having big problem with my notebook.

It goes down after the gray start video.

Doing the fsck this is what comes out...

View 6 Replies View Related

MacBook Pro :: F10/ F11 / F12 Volume Buttons Won't Turn Up / Down Volume

Aug 31, 2014

When I use the F11, 12 buttons, the pages go away or the dashboard comes up. I've tried to change the settings but that didn't work either

Info:
MacBook Pro with Retina display

View 1 Replies View Related

OS X :: Snow Leopard Failed To Install / Graphics Card Failed / System Crashed Had To Reinstall?

Oct 1, 2010

So I have a macbook pro old model.Recent Problems:graphics card failedsystem crashed had to reinstall system crashed again and would be stuck on apple logo
now after i reinstalled SL after the stuck on logo problem my mac was fine.3 weeks later which is now it started to lag,slow,unresponsive.So i tried repairing disk utility and FAILED then i tried reinstalling osx FAILEDthen i had to delete my whole harddrive :*( and reformated the harddrive.FAILED AGAIN.calling apple is a no because i already called alot before so now they want to charge.So did i reformat wrong? something?

View 3 Replies View Related

ITunes :: How To Change File Structure

May 27, 2012

Is there script I can use to change the file structure in Itunes. I would like my music files to have the following structure. My Music/[Artist] - [Album]/[track number] - [song title].mp3 

Info:
MacBook Pro (15-inch Mid 2010), Mac OS X (10.6.8)

View 1 Replies View Related

MacBook :: Invalid Node Structure And Invalid Sibling Links On Hard Drive?

Jun 22, 2012

I'm having some trouble with my Macbook. It's running on Leopard 10.5.8. I recently tried to partition my hard drive and while doing so it prompted me informing me that there was an 'invalid node structure'. I could then no longer proceed with the partition. I had planned on updating my OS to Snow Leopard. I wanted to partition my internal HD, so I backed up some files on my external HD. I basically wanted my interal HD to run smoothly with a new OS while minimizing the space used. Now I've come across this issue where there is another message being prompted that says, 'invalid sibling links on hard drive'. I found THESE steps on another forum that informed me that this might restore the hard drive back to a readable/functional state but that didn't work either:     

(These were the steps I took and nothing happened except another prompt informing me of an 'invalid node structure')

Boot off the OS X CD (reboot, hold C while booting).The installer will load up, go to Utilities in the menu and run Terminal.Type df and look for the drive that has your Mac system mounted---you'll have to unmount this. On my MacBook Pro, it was /dev/disk0s2.Type umount /dev/disk0s2, replacing disk0s2 with whatever disk your OS lives on.Type fsck_hfs -r /dev/disk0s2. If you umounted the wrong thing, it will complain that you can't repair a mounted drive. Go back and umount the right thing and repeat this step. 

I then stumbled upon a few different forums mentioning something about Disk Warrior. I was wondering if THAT would resolved this issue. Honestly, I don't really want to spend much money on buying this but I WILL buy a new hard drive if I ABSOLUTELY need to. I was just trying to see if I can troubleshoot this before I decide to throw in the towel and buy a new hard drive or attempt to try out this Disk Warrior thing.  

Info:
MacBook, Mac OS X (10.5.8)

View 2 Replies View Related

Applications :: Control ITunes Volume (not System Volume) From Apple Aluminum Keyboard?

Oct 20, 2009

I have a Mac Pro and not too long ago I swapped from a fat, heavy and filthy white Apple Keyboard to a new skinny silver one. I like it, and also love that the F7-9 Skip Back-Pause/Play-Skip Forward keys work for iTunes, even when another app is active (what's the word I'm looking for - in focus or whatever). But I use Optical output, so the volume keys (F10-12) don't do anything. I know that, when iTunes is the active app, I can command-+/- to change the volume, but I'd love to be able to map the F10-12 keys to do that - without having to have iTunes active (playing, but not the active window).

View 1 Replies View Related

OS X :: Volume Opens The Window For Expose And Does Not Control Volume Monitor Brightness?

Mar 9, 2010

Recently, my newer (last year) iMac probably running 10.5 started speaking and wont shut up... there is no obvious way to turn it off. I usually figure problems out myself but there are no system preferences that effect it. I even changed the voice in preferences as a test and it is still the same guy reading everything clicked in all applications except when I am in system preferences so far. Usually when I run into a dead end like this there is some mystery key command that works... anyone know?I also noticed that some of the top line (f) keys are not doing what they are supposed to any longer as well... volume up opens the window for expose & spaces it looks like and does not control the volume monitor brightness controls are not working either... I went to the key and mouse preferences and set the key strokes to default and still the same.

View 6 Replies View Related

Applications :: Keep Folder Structure In IPhoto 09 Library?

Jan 28, 2009

Starting out on iPhoto 09. At the moment all my photos are organised in folders, eg Holiday July 08, New year 07, Childs 4th B_day, Funfair March 05 etc I would like to keep them in this order if possible, and start using iPhoto to tag, and organise them all. Reason I want them still in folders is that I also have a Windows PC, Xbox 360, and want to be able to sort them on here to, which wont have iPhoto's organisation and so need the folder structure.

View 4 Replies View Related

OS X :: Pc Switcher To IMac - Unsure About File Structure?

Mar 13, 2009

I just got my new 24" iMac, and within a few days I'll be making the switch. After reading countless forum messages and tutorials, I'm still a bit unclear about file structure (PC) vs folder structure (Mac).

I know the finder will show me folders and sub folders, which seems similar to an explorer file structure. However, I'm not sure how I'd set some things up.

For example: On my PC I have a folder for MY FILES and under it I have folders such as Photos (with sub folders) and Documents (with sub folders). I also have a folder for my pet photography business, which is called NYPetShots. Under that I have a folder for the Pet Photos (with sub folders for shoots etc.), another one for my Promotional Materials (which includes jpgs of flyers and postcards), another for Non-Photos (which includes documents and correspondence), and another for Web Stuff (which includes my web back-ups and Photos used for the web - also in some sub folders).

I am not wedded to using the exact same structure. However, it would certainly make sense to me to keep it. What would it look like on the Mac? I will be importing my entire Lightroom Catalog into the Pictures folder, and that will include my business photos as well as my personal photos. However, they will keep logical structures and will have keywords. I assume there is a folder for documents; however, I have both personal and business, with sub categories in each. So, could I continue to use a folder just for my pet business, even though it consists of different types of files?

View 22 Replies View Related

Software :: ITunes Library Structure Changing?

Dec 22, 2008

When i allow iTunes copy and organize my music files it uses /Artist/Album/# TrackName structure. Can i configure it to use /Artist/AlbumYear - Album/# Artist - TrackName?

View 1 Replies View Related

ITunes :: Keeping IOS App Folder Structure When Moving To New Mac?

Jul 2, 2012

I am trying to move my itunes data over to a new mac. So I moved the iTunes media folder to the new mac, but none of the mobile applications are (which are placed in the mobile applications directory in the itunes media directory) are displayed in iTunes on my new mac. I already changed the iTunes media folder in the preferences. What I managed to do is transfer all purchased items from my iPhone in iTunes, but now each iOS app appears 2 times in the mobile application folder. The next problem is that if i now what to sync my iPhone on the new mac iTunes completely messes up my app folder structure on the iPhone but I would like to keep my structure. How can I move copy ALL of my iTunes data from the old to the new mac correctly?? I don't know why apple made it so hard to do such a thing.

View 8 Replies View Related

OS X :: New HD Not Showing Up In Disk Utility - This Volume Is The Startup Volume And Cannot Be Erased

Aug 10, 2009

I have my imac apart right now and replaced the internal HD as it was not working. I assume the problem is the new one is not formatted with OSX, so from the INSTALL CD I opened the disk utility and see only one drive called "MEDIA".? Or is that just part of the install dvd that looks like a HD? In the system it shows as not formatted, 0 bytes. When selected in Partition it says :

"This voume is the startup volume and cannot be erased. Size 7.1 GB The disk is not writable and cannot be partitioned"

So i guess thats not my new HD I am seeing? Other than that there is only the two OSX install CD icons.

View 2 Replies View Related

OS X :: Unix Folder Structure Exposed After Installing Leopard?

Nov 5, 2007

I installed Leopard on my MacBook Pro (Core Duo) from day one (totally clean install) and it's been smooth-sailing.

One niggle I had was that my Macintosh HD had all of the ugly Unix file structure exposed (see pic). I thought this was a bit sloppy and un-Apple, then when I saw a friend's mac and realised that it wasn't normal I assumed that for some reason hidden files were just visible - nope. I ran the command line commands to re-hide hidden files and it had no effect.

Anyone know how I can amend this aesthetic atrocity?

View 14 Replies View Related

OS X :: HD Malfunction: Invalid Node Structure / 'Sibling Error'?

Mar 12, 2009

Two days ago my MacBook (OSX10.4) crashed; VLC player froze when I was watching a tv show. I though 'no biggie, happens now and then' and hard-resetted my 'book. Tried opening the file again with Quicktime, again, computer froze up. Waited a couple of minutes, hard-resetted my laptop again. Only this time, the screen got stuck on grey/lightblue-ish screen during boot-up.

Tried a lot but couldn't get my MacBook up and running again. Started up with the OSX cd popped in and went to Disc Utility. Mac then told me there was a 'Invalid Node Structure' and that 'The volume could not be repaired'. During a third or fourth start-up this changed to Mac saying there was a'sibling error'.

I checked some sources online, figured out this should be something fixable. One possible option was Disk Warrior. Supposed to be *the* tool with problems like these. I replaced my malfunctioning HD, put an old HD in my MacBook, reinstalled OSX and put the malfunctioning HD in a stand-alone case and connected it too my MacBook. As we speak DW is busy rebuilding the directory but it has been doing so for over a day now. I've read online that it can take a couple of days though. My HD is 250Gb with 30Gb empty space when it went kaput.

Now, there seem to be a couple of other alternative options. These lads talk about Tech Tool Pro - apparantly some other program that could help: [URL]

Then there's a couple suggestions/methods mentioned online that either involve booting up in single-user mode and type some code [URL]

Has anyone ever had their HD act up like this? Any experience/recommendations regarding the programs/methods mentioned above? I'm pretty new with Mac (used PCs for ages, switched to Mac quite recently) and I'm kinda at wit's end here :/. I was in the process of backing up my stuff, but there's a boatload of data on that HD that I hadn't archive yet.

View 3 Replies View Related

Applications :: Finding Database Application With A File Structure?

Apr 23, 2009

Thought that I would ask the collective minds at macrumors. I have been playing around with all of the databasing, collection, sorting apps that I could find.

Goal:

Main goal is a central repository for All of my documents (PDF's, word files, txt files, notes/receipts etc...), all with a user interface so that I may browse my documents.

Problem:

The problem I am having is that none of the apps i have found have everything I need. Now if i could put 2 or three apps coding into one, then I'd have a winner

Needs:

� Tagging system (Devonthink Pro is not functioning)

� Accessible file structure (no sparse bundles etc...), so that I may access my files via drop box if away from my computer, without the actual program.

� Smart Folders As Subfolders WITH Tagging. An example would be to make 3 Nested smart folders ( Personal Folder / School Folder / Math Folder) Now if I dropped a File on the Math Folder Tags would be added to the file to satisfy the entire Folder structure. Please let me know if this needs further explanation.

Wants:

� Shelf would be nice. Devonthink has one that operates as a separate app than the actual program, Together has one, but only when the program is active.

� Decent search ability, but I would think this is easily done utilizing spotlights abilities. I am already manually OCR'ing my PDF's with Acrobat.


I think i mentioned most things, but am sure i missed out on a few points. The best implementation of what I want is a mix of Journler, Together, and DevonThink Pro. Journler nails the tagging, and nested folders perfectly. But does not have a file structure that is usable without the program. DevonThink fales with both nested folders and lack of tagging. I have settled on Together for now, as it works with the file structure I want, and supports tagging. Just does not have smart tagging.

View 3 Replies View Related

Hardware :: WD Essentials 1TB Hdd - Invalid Node Structure - Need To Format (HOW)

Dec 31, 2009

I've been using this external hard drive since Christmas Day and suddenly it doesn't work. I attempted to verify my disk and it came back with "Invalid Node Structure". I've been using this for Time Machine Backups but I don't mind losing them because there isn't really anything majot but I'm currently copying my two largest folders off there because it tells me I need to format my disk as soon as possible. How do I do that?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved