MacBook :: Slow Usb Transfer On Alubook 2.4?
Sep 27, 2009
I have searched the forums, but all related topics seem to be inconclusive or not applicable. I just finished copying 2gb of files from my macbook to a Lexar 8gb flash drive. It took about 12 minutes. I then immediately ejected the drive, inserted it into my iMac, and copied the files over, it took a little over 2 minutes. A 700mb file being transferred right now from my macbook to a different Sandisk flash drive. It took about 3 minutes. This rules out the peripherals right? All speeds where from a direct connection of drive and usb port (no hubs). So why is my macbook so slow transferring over usb?
View 2 Replies
ADVERTISEMENT
Jul 19, 2009
When I go to close it, it makes a noticeable clicking then shuts as normal. If I leave it in a partially closed position for a few seconds, it clicks again when I shut it.
Obviously something is getting stuck or jammed but I can't see what it is or which bit of the hinge it's stuck in...
View 19 Replies
View Related
Nov 14, 2010
So it seems that after a few months our computers, yes even our macs, slow down a bit. I just purchased a new macbook pro and am wondering on the best route to take as I transfer files from my old macbook to the new pro. I've read about doing it from a TimeMachine backup as well as just using the migration assistant. But, will moving my files slow down my new computer and make it act like an "old computer" since it will have basically all of the old files?
View 17 Replies
View Related
Jun 19, 2014
My thunderbolt connection is very slow. I'm trying to download 37 GB from a Sony SxS card and it says it is going to take an hour.
View 4 Replies
View Related
Apr 23, 2009
This ended up being pretty long but I tried to include as many details as possible. If any more information is needed please just let me know in this thread. I have been trying to figure this out all day and it has been driving me nuts. First of all I have a Macbook with a 2.4GHz Intel Core 2 Duo processor, 4 GB of RAM and am running Mac OS X Version 10.5.6. Also this is the last generation of the "white" macbook that came out in February I believe of last year.
My external HD is a 1TB Rock Mobile Disk. For some reason when I try to transfer files to or from the external HD to my Mac I am getting nowhere near the expected 480MB/s. I do use a Swiss Gear 4-port USB splitter. When I use the splitter I am getting a transfer rate of about 120MB/s and without it I am only getting about 300MB/s. This is of course if I am only trying to transfer one 800MB movie. If I attempt to transfer multiple seasons of television shows it will drop to as low as 40-50MB/s. Also, if I were to be transferring a single season of a TV show. The transfer speed is much faster to click and drag every episode from my HD to my Mac than it is to transfer the entire folder at once. The whole folder might take 25 minutes but one at a time it will only take about 5.
View 3 Replies
View Related
Nov 9, 2010
I purchased a FW800 enclosure for my Seagate 500GB 5400rpm HD. I just got a 2010 13" MBP. I was previously using a 2006 MBP with an ExpressCard slot, and had this hard drive connected over eSATA. According to TomsHardware the max sustained write speed of this drive is around 65MB/s, which is what I was getting over eSATA. So I got the FW800 enclosure now that I can't use eSATA with the thought that I'd be getting the same 65MB/s that this drive is capable of. FW800 should be able to handle up to 100MB/s. But I'm only getting around 40MB/s, closer to what I should be getting if I was using FW400.
View 4 Replies
View Related
Aug 1, 2009
just got my 17" MBP today and it's beautiful. Playing a lot learning a lot (my first mac). Having one big headache though.What's up with the wireless speeds? I did some file copying from my Vista machine connected via ethernet and speeds were fine. Now I'm trying to copy some stuff from my girlfriends iMac over wireless (using a linksys wrt54g, both connected at G) and it's just balls slow. I'm talking about a meg a second, the hell?Now, what's really making me upset is the fact that it's also crippling my internet speeds when I'm doing this wireless to wireless file copy. It's like it's pegged so bad at the super fast 1mb/sec that I can't even browse the web without it timing out half the time. Internet is fine when the file copy is not happening.
View 4 Replies
View Related
Oct 25, 2009
If I copy a file to my USB pendrive with OSX Snow Leopard, by simply drag-dropping a file on my usb disk I get a transfer rate of about 2MByte/sec.
If cp the file in a terminal window and time the process with "date && cp test.flac /Volumes/Cruzer && date" I get a transfer speed of approx 4MByte/sec.
In contrary: with windows I get more than 10MByte/sec!
Any solution for this? Or is there a more efficient program to copy files with for osx?
View 1 Replies
View Related
Dec 9, 2010
I have an iMac and MBP. When I transfer files over the network (wireless) from one computer to the other, it is quite slow. I think around 1~1.5mb/sec. Is this normal or expected performance on file transfer via wireless? If so what can I do to increase the performance? Settings on the wireless router?
View 1 Replies
View Related
Feb 5, 2008
Any ideas why my brand new 7-port usb 2.0 hub would be so slow? It this thing nearly 7 minutes to transfer 100MB. Now it is adding song to my iphone at the rate of about one song per ever 45 seconds.
View 10 Replies
View Related
Mar 24, 2009
I've been getting terribly slow transfer speeds when trying to send files to friends over iChat. It can even take over 15mins to just send a 1mb file.
View 4 Replies
View Related
Feb 3, 2008
After some searching, I've seen three tricks: disabling IPV6 on the Mac, doing the same on the PC (my Windows Server 2003 installation didn't have it installed), and adding a line to my /etc/smb.conf file. None seem to really give me full transfer speeds.
Are there any tricks specific to Windows Server 2003 or anything new to make this work like normal? It's simple file transfer over SMB, seems like at the 5th iteration of Mac OS X we'd have better speeds.
View 9 Replies
View Related
Jul 4, 2009
I first submitted this in another section of the forums thinking it had to do with my external HD, to only find out later it's a problem across my entire iMac, not just the external. It's nearly impossible to transfer files from anything other than my internal HD *to* my internal HD. What I mean is, when I try to move a file from my external HD, a shared computer via ethernet, or a mounted .dmg, it's transferring at something like 1mb per second or less. I got my copy of Leopard (10.5.6) 2 Fridays ago (I know, I'm late), and first did an upgrade. Everything was wonky, so I did an archive & install. Everything was still a little unstable feeling, so I opted for a clean install. I moved all my precious files over to my LaCie FW HD, confirmed them, and started onto the clean install and let that run while I slept. When I woke up, I had a brand new fresh installation of Leopard with the glorious BG, and I couldn't have been happier.
I started to move my files over manually (I wasn't using the migration assistance because I was organizing my files as I went considering time was not an issue), and first on the list was my music. I opened up iTunes, set my prefs, and started to import from my external HD. ..I just assumed it was taking a long time because I had around 7000 files of both music and video. But when I went to work, came home, took a nap, woke up, and it still wasn't done, it made me wonder. I assumed it was Spotlight doing it's thing on top of the iTunes import, and left it alone. But now when I'm trying to move over files only a few mbs, it slows to a halt. I tried to install Adium from a .dmg by first moving it into my Applications folder.. it's something like 50mb and it took about 10m. I had been expecting to drag the icon over and here that "ding" you hear when a file has successfully moved. The funny thing about this is that, when I look at the Activity Monitor, nothing's really doing much of anything. So then why is it taking 5hrs to move over a few gigs? Here's a screen shot:
View 24 Replies
View Related
Aug 5, 2009
purchased a Time Capsule today for use with my MBP. it is super super slow.. I can't believe it. How come there were so many good reviews on the Apple site? I hooked it up via ethernet cable, NOT via wireless and it's as slow as this. right now it's showing 3.4mb and 17 000 hours.
View 5 Replies
View Related
Mar 25, 2012
I'm running Lion Server on a Mac Mini and using SMB to share files between the server and both Windows and Mac machines. I can't figure out why I can only get 2 Mb/s transfer speeds between the server and the other machines. I'm quite certain I'm not limited by my network and the disk write speeds clearly exceed 2 Mb/s. Possible to boost this speed or is this an actual limit of SMB or Lion Server?
Info:
Mac mini, Mac OS X (10.7.3), Lion Server 10.7.3
View 1 Replies
View Related
Sep 30, 2010
I am trying to use a WD Elements external HD formatted to Mac OS Extended, and the box says that the HD should have a USB 2.0 adapter, meaning it should transfer over 400 MB/s. Unfortunately for me, I've had many problems with this HD and it is now crawling at around 2.5MB/s, slower than 1.1 speeds. At the moment, it is at 750MB/93.51GB - About 21 hours. This is unexceptable, and I make HD videos, which are usually from 200 - 500 MB, and this would take AGES! I had no problems on my PC with this drive. Please help me! Should I format it to something else, get a new one, or something else? Please leave your suggestions below. Also, if you have an HD that works well, please leave it below,
P.S. All ports are free, except for the one with the HD in it. All that I have hooked up to my Late-2009 21.5" iMac is my wireless Apple keyboard, and my Magic Mouse. Nothing else hooked up to the computer AT ALL!
View 8 Replies
View Related
Nov 9, 2010
I have a 2010 13" MacBook Pro. I bought a FW800 enclosure for my 500GB Seagate 5400rpm HD. In OSX using Path Finder to test transfer speeds I get around 40MB/s. Pretty good. Not as fast as it should be given the drive and FW800's possible speeds, but acceptable. When I switch over to my boot camp partition with Vista Ultimate installed I get 4MB/s. I can't figure out why I'm getting such slower speeds with Vista. I did the tests using the exact same files. So what am I missing? How can I get the transfer speeds I should be getting in Vista?
View 9 Replies
View Related
Nov 30, 2008
My external drives transfer very slowly on my MacPro. I've been searching for answers and have turned up very little.
Just to make a note, I measured my disk speeds with both AJA System Test and copying files between drives and reading the Disk Activity in Activity Monitor.
I have 3 external drives, all MyBook Premium or Professional, 1x 500GB, 1x 1TB and 2x 1TB in RAID 0. I had them on Firewire 400 and the RAID 0 2TB one on Firewire 800. My transfers on FW were all around 24MB/sec on all drives (much less than what I should be getting with FW400). I then read somewhere that the FW bus on the MacPro uses the slowest speed connected for all FW connections. So I unplugged everything but the FW800 Raid 0 drive and my transfer rate jumped to 40-60MB/sec. This is much better, but still about half or so of what I expect it should be producing from an external RAID 0 setup.
To keep my FW800 backup drive faster, I've plugged the other two into USB2.0. The transfer speeds on both drives are now hideous, around 10-15MB/sec. This is so slow, but I'm not sure what to try to fix my speeds.
The HD's in the external drives are all 7200rpm, and all should be transferring at a higher rate. Do you have any suggestions or ideas? Ideally I'd like to get everything transferring at rates they should be transferring at, but I'll settle with my current FW800 speed of 40-60MB/sec if I can get my other two drives transferring at a non-snail pace.
Is this a common issue? I can't believe I'm the only one plugging multiple external hard drives into their Mac Pro. I hope someone has a fix or solution for this. I'm all ears!
System: Mac Pro (early 2008) Mac OS X (10.5.5) 3.2Ghz 8-core - 16GB Ram - 4x1TB SATA - GeForce 8800GT - Dell 30" 3008WFP A02 - Gateway 21" FPD2185W - 3xMyBook external drives
View 8 Replies
View Related
Jul 13, 2010
I am wondering why my MBP takes about 7-8 mins to copy 700 mb files from the external (Seagate FreeAgent pro 500 Gb) and of course, it takes about 1 hour to copy 7 Gb files.
However, this problem has occurred only copying file from external to my MBP, the transfer rate is fine when copying files from MBP to external
Note : I've already repair the disk by using disk utilities, but it doesn't help me at all.
View 5 Replies
View Related
Nov 5, 2007
I have used the disk for a number of years - all appeared to work fine - I am now backing up my data and only get Very slow transfer speed using firewire 800 - 2 hrs to transfer 1.36 Gb. Disk is connected to a Dual 1.8 Ghz Power PC G5 with firewire 800 - another d2 disk is connected to it with firewire 400 and I have just connected a Maxtor disk using firewire 400 to that. I have tried Updated the firmware (it did require it), tested the device alone on both 800 and 400 connections both slow. Restarted everything and used disk repair to check and repair the disks - repaired permissions on the startup disk.
Connected all the devices together again | LaCie 800 - LaCie 400 - and Maxtor 400. It sends data to all the other devices fast (~ 3 min for 1.6 Gb) through the LaCie 800 disk connection!, but does not send data to the LaCie 800 fast at all. Tested the other devices alone as well - they are all fast. Have also performed a TechTool Pro Ver 4 test on the the disk (Disk type ST325082 3A 232.89 Gb LaCie d2 External LUN0 revision 3.03) Passed the surface scan, disk controller and read write tests. Is the disk failing?
Information:
G5 Tower
Mac OS X (10.4.10)
View 9 Replies
View Related
Apr 25, 2009
I did some experimenting this evening to assess data transfer rates to various storage items in my home network which uses a new Time Capsule as the router/hub.
Connected to the Time Capsule are the following:
- Mac Pro (GigE)
- Vista Machine (GigE)
- MBA (Wifi)
- Raptor Drive (USB 2)
- Time Capsule Drive (Internal)
Transferring a 650MB file between devices yielded the following results:
MP > Vista (GigE) = 288 Mbps
MP > MBA (5GHz) = 52 Mbps
MP > MBA (2.4GHz) = 43 Mbps
MP > Raptor (TC USB) = 38 Mbps
MP > TC Drive (Internal) = 38 Mbps
MBA (5GHz) > TC Drive (Internal) = 22 Mbps
It seems that transferring files to a USB drive or the internal drive on the Time Capsule is painfully slow. It took 2:20 to transfer the 650MB file to the Time Capsule over GigE vs. 0:20 seconds to another machine. What's worse, is that the data transfer speeds to the TC are a function of link speed, the slower your connection, the slower your transfer rates. It's not simply limited by some bottle-neck in the TC. It took 3:45 to transfer the same file to the TC from the MacBook Air over the 5GHz WiFi connection. When I complained about this the other day at the Apple store, the "Genius" said that it's due to QOS built into the router to ensure it doesn't kill my web browsing.
View 16 Replies
View Related
Apr 10, 2012
I am transferring my iPhoto library to an external hard drive and it is agonizingly slow.
I am attempting to make room on our iMac so am moving our 193 GB iPhoto library to our Seagate 2TB external hard drive. The drive is brand new AND is formated properly as Mac OS Extended (Journaled) but the current copy estimate is for it be completed in over 80 hours. I dont beleive the drive is broken as data is continuing to be transferred and not completely hung up.
When I transfer other folders/files the process is much much faster. Problem only seems to be with iPhoto library that I have found.
Info:
iMac, Mac OS X (10.6.8)
View 2 Replies
View Related
Feb 29, 2012
I have a 2011 Macbook Pro and an older (5 year old) Western Digital external hard drive. I have always used this hard drive for both mac and windows. Recently, however, whenever I go to transfer a file from the mac to the WD hard drive, the little transfer window pops up and it appears to initiate the transfer. However, it never fully starts it. It appears to "get stuck" in that initiating stage, showing zero of 3.16 gb transferred and shows an unknown transfer time. This happens no matter how long I leave it open. Again, I have used this external hard drive with my macs for the past 5 years without any problems until now. I haven't moved or modified the WD hard drive
Info:
MacBook, Mac OS X (10.5.5)
View 1 Replies
View Related
Jun 3, 2004
I have a new MacBook (Dec '08) and everything is working fine with one exception. When I type numbers into the calculator app they appear on the screen in slow motion with a nice long pause as each number typed is displayed. On our iMac the calculator app just flies along and has no problem keeping up no matter how fast I enter in numbers. Any ideas where to start on this one? Besides the standard software we have installed Microsoft Office and Handbrake.
View 6 Replies
View Related
Mar 28, 2012
I have a Macbook Pro core 2 duo era 2007, OS 10.6.8, with an interesting problem I've not encountered in reading other issues. Here's the system profile, to get that out of the way: [code] Enabled Other than the faulty video card that seems standard for this run of the Pro, I have never had an issue. I have just replaced the battery from the original battery that came with the computer. It was useless to the extent of the word, but my budget did not allow me to purchase a new battery until recently. The battery info only stated "Replace Now" and the LED meter no longer functioned. The battery held no charge, and the computer only ran off of wall power. Up until a few days before I replaced the battery, this provided no trouble. However, it began one day to startup extremely slowly (5 minutes or more on the Apple logo startup screen, and then more time to load dock/top screen toolbar/etc. It also failed to recognize the external HD I frequently use with this computer. My theory was that it was simply underpowered on account of the failed battery, and the internal HD or the CPU was just not able to run properly. I finally put a new battery in hoping that it would fix the issue, but no avail. My startup time seems slightly less, but it seems as if the computer has not loaded interface protocols, as the computer is unresponsive to attempts to open the dock or a finder window, or even hover over battery or volume icons. After 5-10 minutes it finally kicks in and I can use my computer without problem, with the exception of the external HD, which will still not load.I have run disk utility, verified my HD, no errors reported. I have the activity monitor up which shows a pretty minimal load on the CPU and disk usage. Nothing I can think of would explain the problem my computer has suddenly adopted.
Info:
MacBook Pro (15-inch 2.4/2.2 GHz), Mac OS X (10.6.8)
View 3 Replies
View Related
Aug 24, 2014
I have this MBP 13'' Mac OS X 10.7.5 running a 2.4GHz i5, 4GB RAMs and 500GB storage.The problem started yesterday when I was typing on Word and I copy pasted something from the net (chrome browser) then it froze.I waited for around 5minutes and still frozen with the spinning wheel, then I decided to turn it off by pressing power for 10 seconds restarted my
MBP then now it running so slow on start-up and apps are very slow to open like around 5 minutes. Every action that I try to do like clicking on the apple in the upper left it freezes showing a spinning wheel and it will take time to show the drop down options. I checked disk utility and it said that HD is ok, done verify/permission verify and repair.
I checked the activity monitor noting the ram/CPU usage and its normal it even tells that 2GB of ram is not use.It shows not responding in the activity monitor if you open an app for around 5mins then it opens or it will crash.I already done the 2 kinds of reset and did not work.BUT it opens normally in Safe mode.
Info:
MacBook Pro, Mac OS X (10.7.5)
View 5 Replies
View Related
Apr 17, 2009
I'm finding my MBA rev b to be quite slow opening apps, I bought the 1.6 ghz 120gb model.
It seems like everything's rather slow to open. I have 30gb free on the hard drive, iTunes, Safari (5 tabs) TextWrangler and mail open all day.
If I ever need to go into Firefox it takes a fair while to get up and running. I ran some xbench scores and it seems very slow on the random reads, oddly it was much quicker writing to the disk than reading.
Is their anyone in the know who can confirm that this is normal? Or if not, is there anything I can do to give it a boost?
View 12 Replies
View Related
Jun 6, 2012
I edit using Lightroom and Photoshop and I'm having an issue while editing. After editing around 8-10 photos in Photoshop the computer starts running unbelievably slow. After each 8-10 photos I have to close down everything and reboot. Even the reboot process is super slow as I have to force quit each application usually 1-2 times to get it to close. Is this normal? I have a 2011 17" with 2.2 GHZ i7 with 8GB ram. Is there any setting that I can change or be aware of.
Info:
MacBookPro, Mac OS X (10.7.2)
View 3 Replies
View Related
Dec 11, 2010
Hey guys, i got an old Powerbook that the whole family use to surf the net. I notice its been super slow lately. Ive never had a problem with this notebook, I've only done 2 reinstall in the time ive owned it. I recentluy did another one, and notice its still slow, loading websites is slow, cant watch movies on it. This is a notebook i use to do photoshop and illustrator work on.
Do you think its just its time? I think it could be the hard drive or memory, is there any type of diagnostic i can do to find out what the problem is?
View 7 Replies
View Related
Nov 23, 2008
I am copying my DVD collection to the computer to be able to play on an iPod and a mac mini hooked up to the hdtv. Mainly TV shows.I have a Mac Pro with 2 DVD drives. The first one is the original drive (Pioneer DVR-111D) and the second is a Pioneer DVR-116D which I added. I intended to use this 2nd drive mainly for ripping DVDs because I knew I would have to update the firmware to get rid of riplock.
On the DVR-116D drive, I updated the firmware to remove riplock so it would not be limited to 5x read. I have not updated the firmware on the original DVR-111D drive. I am using fairmount to rip the DVD.Under OS X just ripping the DVD to the hard drive takes maybe 20-30 minutes. MacTheRipper is just as slow as is making a disk image using disk utility. I boot into Vista and use DVD Extractor and the same DVD takes 7 or 8 minutes .
Why is it so slow or is there a faster method of ripping a DVD on OS X?
View 4 Replies
View Related
