So the temp of my hard drive has been 34 degree F for since I put in my SSD. I was searching and found this [URL] Does the MBP have something along these lines that need to be reconnected or is the temp sensor actually built into the hard drive and not used on an SSD because it can run hotter?
View 2 Replies[URL] This is the full screen shot of this person's desktop that I found(Click on the image on the page and it will enlarge), but the applications I am trying to find are the two in the top right corner. The First is the one that shows the Used and Free HD space? and the other is the temperature one its showing 60 degrees and I was wondering what that app is. I really want that HD application.
View 1 Replies View RelatedI'm assuming that a MBP purchased with 4Gb will have 2x2. If I wanted 8Gb, I assume the only option would be to buy 8Gb (4x4) and replace the 2x2. Is there a market for the 2x2 I would be removing from the MBP? What do most people do with this RAM that they replace?
View 10 Replies View RelatedI'm planning to get a 17" MBP whenever they update. I've been toying with the idea of getting an SSD as well to reduce IO contention with some applications. Would I be better served getting the Apple SSD option for whatever ludicrous amount of money they want, or would it make more sense to get one from NewEgg and install it myself? I'm curious about this not so much from a technical standpoint (I'm comfortable doing my own hardware swap), but rather from a "what kind of grief am I likely to get about voiding AppleCare if I have to have the new machine serviced down the road?
View 24 Replies View RelatedEveryone is telling me I should do the upgrade myself to get a better/cheaper drive at the same time.
View 6 Replies View RelatedWill be using my new 500GB 5400 rpm as an external and wanted feedback on the best aftermarket 7200rpm drive. Price / Speed / Battery Impact. I would appreciate some info from all you techies.
View 24 Replies View RelatedI recently downgraded from a 128GB SSD model to a 120GB HDD Rev Air. However, I learned after the fact that there are in fact NO aftermarket hard drives of any sort for the Air because of it's SATA - LIF connector. Given the fragility of the 1.8 inch HDD, this pretty much means we're all going to have a very nice lookin' paperweight after the warranty runs out. Does anyone know if ANY company is going to release an aftermarket SATA - LIF HD? It seems unlikely since the Rev B air is the only notebook that uses it... if that's the case I'll probably end up selling this computer despite how much I like it
View 21 Replies View RelatedI am considering a purchase of a 17" unit. I will probably buy a base unit and then upgrade the memory and possibly the HDD myself (this is largely driven by procurement transaction limits). Is there experience here in adding a SSD to the 17in? I could manage with 256Gb, but have 500Gb drives reached the market yet?
View 5 Replies View RelatedI put all the fans up to 1000 but Power Supply stays at 599. Any thoughts why it wont go up? Also whats a safe temp for harddrives? My HD:macintosh drive was around 39C- 41C when I put the fans on higher. Now its at 37 and its only 60degrees out today and my room is already over 70 (dam attic ) i wont be able to use my computer when its 100 out
View 8 Replies View RelatedI love my year old MBP. However on campus I've noticed that when using it in class and outside or in a restaurant, the glare is awful. I wish I had gotten the AG screen, but I do not want to sell mine and buy another. What is the best screen shield that I can put on my notebook?
View 2 Replies View RelatedI noticed that iStat and Temperature Monitor report different temperatures for the same readings on my G5 Powermac Dual Processor System. For example as I am writing this Temperature Monitor is saying My CPU A is 46.8C and CPU B is 46.7C. In iStat it says CPU A is 55C and CPU B is 54C. Which is right!?
View 2 Replies View RelatedI apologists straight away if this have been covered recently, but i need to ask.I have MacBook with Intel Core Due Processor, 2 GB ram.What is the average temperature CPU temperature for standard usage ( I know that standard usage is very arbitrary, and by this I assume safari, iTunes and let say Pages to be the only major apps running ).I use iStat pro widget and according to it my CPU temperature is 55*C. Is this too high? Lately the fan has been turning on more recently almost without any apps running so I think that there might be some hardware problem. I ran HardwareTest it found nothing.
The macbook is 2 yrs old. Do i need to get it cleaned or is there something else I should be worrying about?
Got a new MBP last month to replace my white MacBook - loving it as an upgrade but one gripe - if I'm sat using it on my knee I regularly hear the "click" type noise of what I imagine is the protection of the hard drive because it thinks it is being dropped.
I never heard this on my old Mac and while it's not a huge issue it is a bit disconcerting, as though I'm being told off for moving it in a fairly responsible way.
I have an aluminum unibody macbook from October 2008. I'm looking to upgrade the 160 GB hard drive inside to a 500 GB one I'm considering from Newegg. Would it be possible to migrate/copy/clone the entire contents of my current hard drive to the 500 GB one? I also have a section of my current hard drive partitioned for Bootcamp. Would this affect my ability to transfer everything over?
If this is possible at all, how can I go about doing so? If there are steps laid out somewhere, I'd appreciate a referral. Sorry if my question is a little elementary, but I did a search on these forums and also google and nothing really came up
I am going to be getting a iMac, but am struggling with the decision on getting the ssd option. Who here is going to be modding it and adding their own? Is the new one supposed to be harder to mod then the last model?
View 13 Replies View RelatedRecently I bought 2 identical WD Scorpio Blue 1TB hard drives for my macbook pro 13 inch 2010. My aim is to replace the internal hard drive with one of the two I just purchased and use it as my system drive with Lion, Windows and Data partitions. And for the other hard drive I want to use it as a full disk back up for the internal drive (now 1TB hard drive). After I was done with setting up both windows and mac and data transfer, when I booedt into the recovery partition from the internal drive to clone the drive to the external drive, the disk utility gave me this error (Could not validate source - error 254). I also tried using Carbon Copy Cloner but it only could clone partitions, not the entire drive. Yesterday I downloaded a copy of Clonezilla. It worked fine until it had to clone an exFAT partition (my data partition). The exFAT partition appeared as 'RAW' partition in clonezilla. As a result, the whole partition appeared to be full and clonezilla had to copy every single blocks of data in that partition and the estimated time remaining was about 30 hours. So clonezilla is out too. Just want to ask if there is any program/application (bootable or not) which allows can do a full disk clone to an external hard drive.
View 1 Replies View RelatedMacbook Pro 17" Early 2011Â
Notes. Failed HDD ASD Test.  A new hard drive was installed in September of 2011 after the previous hard drive failed. Having worked well until now the system seems to give the same problems as it had previously. I am wondering if this is a compatibility issue as others have pointed out. Â
I have been told by the technician my only option is to replace the entire hard drive again for the second time with a new one. However to my understanding a ASD test is very specific and this my not be necessary? Further I am attempting a final backup just in case. I don't have to take it in where I could just back it up myself without the system shutting down.
Info:
Mac Pro
I'm replacing my old 120gig hard drive with a new 320gig hard driveWhen Ive got the new hard drive installed can I just put the old hard drive in a enclosure kit/caddy and copy my music/movies/etc across to the new hard drive?Or do I have to copy the data off before I remove the old hard drive?
View 3 Replies View RelatedToday I went to plug in my Lacie 250 GB USB external hard drive into my 13 in. MacBook to get a shirt template for a design I am making. I discovered that the hard drive just would not mount and show on the desktop, and I remembered that this happened a few days before, but all I did was unplug it and plug it back in, and it worked... except that today, that didn't work at all. I tried the other USB port, and the hard drive showed up on the desktop for about a second, and then disappeared. I kept on replugging it back into both USB ports, but nothing happened.
Then I tried to see if it would work on the PC beside me, and it was recognized as an external device; however, a message came up telling me the drive was malfunctioning. I am guessing this is from ejecting it incorrectly (because I am in a hurry to head to my next classes...I use this laptop at school), but I have incorrectly disconnected it before in the past and this problem never happened to me before.
Every single project I have ever created for my design career is on that hard drive, and all I want now is to get my files back. All I need it to do is show up on the desktop for just the right amount of time for me to copy my files onto my computer.
I read online to put it into the freezer for a while and it should mount, but that didn't work. I tried using Disk Warrior, Data Rescue 3, and Tech Tool Deluxe, but the hard drive did not show up on any of those apps.I tried plugging the hard drive into an iMac as well, but it did not show up either.
I bought a new 500GB WD hard drive for my Late 2008 MacBook to upgrade from my 250GB drive. I have a hard drive enclosure, but I was wondering if when I install my 500GB hard drive, would I be able to use the enclosure to transfer files from my 250GB drive? I hope this was specific enough to get a clear response. If not, I'll try re-wording my question.
View 7 Replies View RelatedMy PowerBook G4 (Alum) died. I've had it for 4 years, taken it with me to Alaska and all over the lower 48, and have had nothing but happy experiences. I knew she was gonna go, but I was hoping she'd hold on until I could afford a MacBook. Alas, no. The problem appears to be the ability of the logic board to communicate with the hard drive. I can hear the HD spin, but even with Disk Warrior, I cannot locate it. The Mac Geniuses at my local Apple store confirmed this and gave me a shoulder to cry on. I've run Disk Warrior, Disk Utility, and tried finding it using the target disk mode - no luck.
The problem is that I've got 4 years of teaching materials, 6000 songs, and irreplaceable pictures on the HD, so I can't bring myself to just trash it. It's true that you only fail to back up you stuff once. This is my once. I've heard that with PC hard drives, you can just drop the old HD into a USB HD box and use it as an external HD. I can't afford professional data retrevial, and I want to give this option a try if it'll work with a Mac HD. Any ideas or suggestions?
How do i play media files from my external hard drive without transferring the files to my mac hard drive? I have a lot of media files and want to be able to play them soley from my external hard drive.Â
Info:
iMac (27-inch Mid 2011), iOS 5.1.1
My PM G5's Hard Drive has been making wierd noises lately and I'm really beginning to worry that it's failing. How can I be sure?
View 1 Replies View RelatedI know this is going to be an incredibly easy fix, but I can't find it. The Hard Drive on my new iMac is not appearing on my desktop, nor is it appearing in the "Device" menu in Finder.
if i delete files off my internal hard drive (Macintosh HD), will it still be on my external hard drive or will it just add to it?
View 1 Replies View RelatedI have just installed a new hard drive in my imac intel 20" (2006) and upgraded the memory and now the hard drive does not show up in the 'select destinations' folder of the install program. I can see the hard drive in the disk utilities window however it wont let me do anything.It is a seagate 1TB SATA II drive however it is displaying it as a 7.3 TB.I have tried to erase and partition and get the same error message each time, 'Input/Output error'.
I have tried starting the thing with the install disk which is Mac OS X (Tiger?) which came with the computer
Info:
iMac
with cloning/copying the content one an external hard drive onto a new external hard drive. Basically, I have a 500GB FW400 drive which I use to store my media files. It's full, so I purchased a 1TB FW800 drive to replace it. Obviously, I thought I could simply copy and paste the media files from the old drive to the new one.I cannot copy the media files to my internal drive first as my internal drive is only 250GB and nearly full itself.I have used Disk Utility to attempt to close the old drive to the new drive, but keep getting "insufficient space" errors.
View 9 Replies View RelatedI have a 3 year old Macbook pro which is still going strong. It's my birthday soon and I'm thinking about treating myself to a new 500 GB Hard drive. I have looked up how to upgrade it myself on iFixit.com and it looks OK but I'm just checking here to see what the general level of opinion is about difficulty / risk of buggering it up. The link to the process is here: [URL] I paid to upgrade the stock HD to a 250 GB whilst it was still under warranty but since that has expired now I don't think I have as much to lose by opening it up myself.
View 10 Replies View RelatedHad a hard drive failing/failure. I am having my bad hard drive replaced with a bigger hard drive. (New Obviously) I have an iMac. (1.83GHz Intel Core 2 Duo 17-inch) To have my data transferred from the old drive will cost over a hundred bucks more. I am trying to save money but transferring it myself. All im looking to transfer is my photos. I did not have an external drive but i WILL purchse one now. My question, (to save some money) is how would i transfer my old pictures from my old drive, too my new installed hard drive. Can i use USB? Firewire?
View 2 Replies View RelatedI've just got a new external HD, but it's not being recognised by Mac OS X (10.5.7). I assumed it was because it was in a Windows format, so booted Windows, but it then turned out it wasn't formatted at all. What is the easiest way to make this an HFS+ (the Mac OS extended format), and how do I do it as I can't see it anywhere on the Mac (including Disk Utility)?
View 6 Replies View Related