Iv'e noticed that the new MBP's now come with a 85w power supply last years model used a 60w. We have a few macbook pro's here and are constantly moving around our space and jacking into each others supplies. Will using a 60w on the new model or the 85w on the old model be detrimental to our machines.
View 13 RepliesWirelessly posted (Mozilla/5.0 (iPhone; U; CPU iPhone OS 4_1 like Mac OS X; en-us) AppleWebKit/532.9 (KHTML, like Gecko) Version/4.0.5 Mobile/8B117 Safari/6531.22.7) How big is the power brick for the new 11" air? Is it similar in size to the iPad one? I want the small air but I dont want to carry around a giant brick. Wouldn't it be nice if you could replace the USB cord on the iPhone quick charger with a MagSafe cord??
View 3 Replies View Relatedthis might have been discussed before, but I just cannot find a threat about it: May I use my old 85W Brick of my older 15″ for the new unibody 13" Macbook Pro? The MacSafe Adapter certainly fits. But is ist safe to use it ?
View 3 Replies View Relatedanyone notice those two flip things on the power brick? What do they do?
View 3 Replies View RelatedI just wanted to know if the power brick on the Air is auto-volt.
View 2 Replies View RelatedI went upstairs last night to find my Macbook Pro's charger had no light lit up on it. I tried everything including changing wall sockets, resetting the SMC, with and without the battery - nothing! I then noticed I could feel the electrical current on my Macbook Pro and then it started, a loud ticking coming from the brick. It's dead. It's just under 18 months old. Apple has said that I have no Applecare, no tech support and no warranty so buy a new one. I thought electronics HAD to have a 2-year warranty on them in Europe? Can I take that to apple? It's �60 for a new one and things like this shouldn't fail after just 17 months.
It's the old 85W type. The guy at Apple told me they only do the "new" 60W types. Can I use these with a June '08 Macbook Pro? I've had no end of problems with my MBP. I may call an end to Apple - I'm not happy paying over the odds for this Macbook less than 18 months ago for it to have had so many problems already.
Just bought my first mbp from apple store today and when I get home it refuses to turn on. I got a brick from apple store. Plugged the power in an let it rest for almost half an hour and still won't turn on. Going to apple store Tom morning to demand a replacement. Will apple do anything to compensate for the hassle that I went through?? And the customer satisfaction definitely went down.
View 24 Replies View RelatedMacbook Pro 2.2. Is there a way to replace just the magnetic area. One of the electric pins inside is not springing out. The connector ends up getting warm and now it will not even charge. I am using girfriend's macbook magsafe. I dont want to have to buy a new magsafe when I could possibly just replace the connector.
View 1 Replies View RelatedIs there any reason NOT to use the powerbrick from my earlier MacBook Pro with the new one? I know the new brick is bigger and more powerful (85W) but will anything go wrong if I use the old one when I plug in at my office?
How about a 60W brick for an old MacBook?
Anyone know where I can buy an extra AC cable for the MagSafe 85W power supply that came with my late 08 MBP? I'd like an extra cable and I'm not interested in ponying up the dough for the entire power supply. I checked the Apple Store and Macmall, but haven't found anything as of yet.
View 3 Replies View RelatedLast Thursday I down loaded software updates from apple and have been losing power very quickly ever since. It just seems like as soon as I remove the power cord I lose power with in three minutes.
Info:
MacBook, iOS 5.0.1, purchased feb 2009
I've been suffering of slow speed on my macbook pro, and this happens when I unplug it from power and just let the battery works itself, then the % CPU usage increases dramatically to 330% and the laptop becomes very very slow, what should I do? Because if my macbook is off-power, it doesn't work properly, so what is the point to own a portable computer?
Info:
MacBookPro, Mac OS X (10.7.4)
Can I use existing 85w magsafe adapter from existing macbook pro with new MBA 13 magsafe2 port ?
Info:
MacBook Air
I recently discovered my computer had died while it was sleeping. I tried charging it but am recieving the "Battery not charging, power source: power adapter" status.My power cord light is green, always. and the computer dies instantly when I remove the magsafe.
I've tried the "remove the battery, press the power button, plug in the magsafe" troubleshooting process, but it doesn't work.I've noticed that even with the battery out, the charger reads a green light.I've tried several outlets with the same results.Here are my battery stats
Battery Information:
Model Information:
Serial Number: DP-ASMB016-384e-7636
Manufacturer: DP
[code]....
Info:
MacBook, Mac OS X (10.5.8)
My girlfriend has a 12 inch Powerbook G4. She noticed that the battery life was starting to dwindle. Tonight, she tried using it. It wouldn't power up. The battery indicator showed one flickering power circle. The adaptor has the green circle on it, indicating the battery has a full charge. However, the computer won't charge up.I've read the 12 inchers don't have separate PMUs. Could that prevent the machine from starting? She was using it earlier this evening, as she e-mailed me pictures from our vacation.
View 10 Replies View RelatedI have a iBook G4 laptop and there seems to be something very wrong with it. It started a few days ago just randomly. I was reading something on the internet and the screen went black on me, but the power was still on (I clicked CAPS LOCK to see if there was power). I then proceeded to push the power button and the power went off. When I pressed the power button again to turn it on, it made that internal noise it always makes and then the fan came on, and wouldn't turn off. There was no picture on the screen at all. Completely dead. But there was power, because when I clicked on the CAPS LOCK, the light came on). I tried pressing on the power button for at least 15 seconds and even went as long as a minute, and the power didn't go off.
View 3 Replies View RelatedI had a bad power surge (USB hub that was plugged into the back of the display had the wrong power cord plugged in... very stupid mistake I know!!) take out my 23" Cinema Display. The display shows no sign of life (no power light, etc) and the brick has been tested and is OK. My local service place says that they will have to send the display back to Apple which means a minimum of $400 for repair so I'm wondering if anyone has had a similar issue that they resolved successfully? The service place suggested that Apple would replace the logic board but is there any way to test to see if this is the main issue? I have seen logic boards sold separately online but would be hesitant to buy it without know that this would fix this issue.
View 10 Replies View RelatedI made this a new topic because I think it is important enough to do so. Probably most of those that originally complained about this have moved on to the new MacPro but I am sure there are still enough G5 owners out there that still have concerns about this topic.
A clean install of Leopard eliminates the infamous power supply beeping
Its amazing, my G5 is like a new machine; no more of the annoying power supply beep; although, I learned to live with it after a while and didn't even notice it. However, the silence is now very noticeable.
Where can I obtain a new 23 Inch Cinema Display power adapter? I've searched the Apple Store but I cannot find it.
Information:
G5 Dual Core PowerPC
Mac OS X (10.5.1)
23 Inch Cinema Display
I have found that by plugging in my Apogee Duet firewire audio interface and ONLY WHEN AppleFWAudio was loaded there was a 10c CPU raise that was making my MBP (late 2008) hot!I wanted to monitor the power that was required for Duet to run and to see if the temperature rise was due to that, so:With Apogee drivers uninstalled (just to be sure its not their drivers related, which is notMBP on battery power with System Profiler opened (to monitor the mA required by the computer from System Profiler -> Power)
View 5 Replies View Relateda friend recently gave me a g5 power mac that had some issues, and the failure was described as intermittant. The machine supposedly would work properly when booted and start freezing up after time, but if turned on the next day it would work properly for some time. I assumed it was an overheating issue, but apperently there is more to the picture. I have tried booting the machine quite a few times and the display always reads no signal. The machine sounds as if it were booting normally, but there is not output. At first I assumed it was my display cable, which was a DVI-D single link, however the DVI-D dual link cable leads to the same result. Is it nessicary to have a DVI-I cable? None of the error LEDs light up on the motherboard. After doing some hunting I haven't found anyone with the same issue, but I am wondering if I should assume the graphics card is dead. What steps do I need to take to isolate a graphics card failure in a power mac g5?
View 3 Replies View RelatedI hav" a "late 2004" G5 2.0 dual processor. To upgrade graphics card, I find many require a power supply splitter. Do I have a molex 4-pin connector? I can't see the location inside the box.
Information:
G5 dual 2.0, 2.5Gb
Mac OS X (10.4.3)
I have the problem that I need to frequently power cycle (shut off and on) my dsl modem to maintain a reasonable speed with my internet connection. It is making the internet experience pretty user unfriendly. Does any one know whether there is a way to optimize my internet connection such that this is not required so frequently (couple times a day)? I am on my second dsl modem, and the same problem has occurred with each of them. ATT simply advises me that my solution is to power cycle the modem to sync the system, whatever that means.
Information:
Power Mac Dual 2.0 GHz
Mac OS X (10.5.1)
ATT DSL Internet Connection
I added 2 sticks of 512 to my power mac g5 1.6. I had ahard time getting the computer to see the new ram, but finally was able to kinda get it working after zapping the pram. However my computer only saw these 2 sticks as 256, odd. So i attempted to troubleshoot the problem. I tried just installing the new ram, but the computer wouldnt boot. I tried a few different combos with the other 4 sticks i had, but nothing. I put the old memory back in, and still nothing. The power led looks to blink once every five seconds or so. I tried pressing the pmu reset button, but still the same out come. I also tried taking out the battery, nothing.
Information:
1.6 g5 single proc
Mac OS X (10.5.1)
I had a weird issue this morning. I started computer and it did not make the chime sound, it didn't do anything at all. I disconnected it from the extension cord as well as all the peripherals attached to it and nothing. I tried a different start up disk and again there wasn't a sound. Then i unplugged it and reset the SMU on the mother board and air sprayed the computer to remove all dust. Then plugged it back and it came back on.
Information:
Power Mac G5 Dual 1.8
Mac OS X (10.4.11)
I'm using a B&W Power Mac G3 with 512MB RAM and OS X Tiger for a SMB file server (with 5 users) and a USB printer server. Everything is working good, but I have a problem.
It doesn't have a monitor or keyboard/mouse attached normally (I can configure it via VNC). The problem is that I would like to be able to turn the machine off when it's not needed (like at night sometimes, days when I won't be home, etc.). I would like to just hit the power button and have it turn off, however it puts it to sleep instead.
Normally, sleep would be fine, except on the B&W, the fans still run, just the HDs shut off, so it's still noisy as heck.
Is there a way to make the power button shut it off? If not, any other easy methods of shutting it off you can think of? Via VNC won't cut it, as my dad needs to be able to turn it on (not a problem) or off as well.
i just got my new imac 2 days ago. I was wondering is there another to turn on the power without pressing the power from button? (cuz i remember u can power on from the keyboard b4)
View 7 Replies View Relatedtried 2 boot up my G4, nothing, replaced internal battery, no status change, advice? would still like to be able to use it if possible and affordable
Info:
G4 dual os boot, Mac OS X (10.4.11), will also boot up in OS 9.2.2 when
I have an old power mac and want to get it online if possible .Does anyone know if ots possible to install an airport card into it and get online that way ?
Info:
PowerMac, Mac OS X (10.4.11)
I have a problem described by Apple in document Power Mac G5 (Late 2004) 1.8GHz models stop responding randomly.
How can I update the firmware because my G5 1.8 screen is blank? Thought that I could make my G5 1.8 as a hard disk for my MacBook, or I may try to update over the network. Is there a risk of corrupting my MacBook if I try?
Information:
G5 1.8
Mac OS X (10.4.10)
McaBook
