MacBook Pro :: Sometimes Doesn't Wake Up
Jul 2, 2010
Sometimes after I logoff, I'll close the lid on my MBP. I always wait until I'm fully logged off before I do this. Later when I want to use my computer I open the lid, the keyboard backlight comes on, but I get no picture on the screen. If I take the machine into my office and connect it to my external monitor, I get no picture there either. The only way to get my computer back is to hold down the power button until it turns off and then turn it back on. Has anyone seen this issue? If so, do you know of a solution? I don't think it's been doing this since I bought it. It seems like it's been worse since the latest OS X patch, but I could be mistaken.
View 5 Replies
ADVERTISEMENT
May 4, 2009
So over this weekend I upped the ram in my Macbook from the stock 2gbs-4gbs. Everything seems to be fine but now what's happening is when I close my Macbook lid and put it to sleep it won't wake up when I open it later. It seems like it wakes up as the light at the bottom goes out but there is no response from the keyboard or display. If I hold down the power button for 5 seconds then the Mac shuts off and I can boot it up as normal. I checked over the reporting screen when it reboots and it seem to be indicating a kernel panic occurred. The memory seems to be recognized and working but it wouldn't explain why my mac suddenly is freaking out. I've tried the SMC reset and now I'm going to try the PRAM reset. I figured I'd check here if anyone has any ideas. The type of Macbook I have is a 2.4ghz Alum. The memory is from MacSales.com OWC 4GB PC3-8500 DDR3 1066MHz DIMM Upgrade Kit This appears to be a house memory but i've had great luck from them before with this same brand.
View 15 Replies
View Related
Dec 24, 2009
Why doesn't my MacBook Pro wake up from sleep sometimes ,I close the lid and when I come back and reopen it the screen doesn't turn back on.
View 4 Replies
View Related
Apr 15, 2012
Sometimes turning it off and back on works. Othertimes not unless I leave it off a long time.
View 3 Replies
View Related
Jun 26, 2012
It's been a while now that my mac pro 13" (july 2011 version with lion) either doesn't wake up from sleep (or appears so because the screen stays turned off) or it does but when asked to log back in, I type the password and press enter, and the colored wheel shows up and stops responding...not even gets to log in. I have to hard reset with the power button.
Info:
MacBook Pro, Mac OS X (10.7.4)
View 4 Replies
View Related
Apr 6, 2009
I've heard that Macbook Pro's have this issue, but it seems like my white Macbook is exhibiting this sometimes. It's not a lot but I've encountered it about 3-5 times now. When I just close the lid, the little white light at the front should glow and unglow. It seems like the light stayed lit so when I open the lid the screen wouldn't turn on and there is no response and I would be forced to cold boot. My Macbook is up to date, with no problem in diagnostic.
View 3 Replies
View Related
Apr 7, 2010
This happens randomly. I don't know if it's the new hard drive I put in there, which I doubt.
The screen flickers from time to time (nVidia issue.) Don't have the time to take it in right now, but I will.
View 2 Replies
View Related
Aug 24, 2014
I have brand new, mostly untouched, 13" rMBP running Mavericks (10.9.4) that crashes during sleep. If I close the lid and leave it for more than a few hours, I have to do a force shut down by holding the power button for a few seconds and turn it back on again.
I've already followed the advice of this article: OS X: When your Mac doesn't sleep or wake and have called Apple Support, who did nothing but read the article to me.
I have:
- reset the System Management Controller
- restored all defaults in Energy Saver preferences
- booted into Safe Mode to verify disk (unsure of whether or not this was effective at all)
In my Console, I am getting a line that says "com.apple.message.signature: Platform Failure"
According to this other thread - MB can't wake up from sleep anymore - it seems like it might be a hardware failure.
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.4)
View 1 Replies
View Related
Feb 22, 2012
I am using a 15" MacBook Pro Santa Rosa (mid 2007), 2.2 GHz Intel Core 2 Duo, 6 GB memory, with a 240GB OWC Mercury Extreme Pro SSD (15 months old). Lion 10.7.3. Computer doesn't boot into Safe Mode AND also if it "goes to sleep by itself" (I don't touch it for a while, then it falls asleep) after some time when I try to wake it up I get the Spinning Ball of Death or a black screen and the only thing I can do is press the power button for some seconds to power off. It wakes up OK if I, either close the lid or Apple icon-> Sleep.
WHEN TRY TO BOOT INTO SAFE MODE: Immediately after the startup chime I press the Shift key, after 2-3 seconds get the login window, key in my password. Instead of logging in, it goes to a screen with the Apple icon, underneath it, the Apple spinning gear and underneath that a loading bar. After quite some time the loading bar disappears, the gear goes on spinning for a LONG time, then black screen, startup chime again and login window. Then, when I key in my password, it just logs in as usual, no safe mode.
I tried to write in Terminal “sudo nvram boot-args="-x"”, BIG mistake! It got my computer into a loop of those screens. I don’t exactly remember what eventually got me out of this loop (I think I booted from a clone, then started with the Lion CD and wrote back “sudo nvram boot-args=""” in Terminal. Also set up an additional administrator account but all was the same. Tried verify/repair disk, everything OK. Eventually I erased completely the HD (not Recovery HD) reinstalled Tiger, Snow Leopard and Lion again, downloaded all applications/software/programs I had, from scratch and only copied the data from a backup, being sure that after that all problems will be over, but... everything like it was, no "normal sleeping" and no SM booting.
Info:
MacBook Pro, Mac OS X (10.7.3), 6 GB Memory 240 GB OWC ME Pro SSD
View 2 Replies
View Related
May 25, 2012
After I put the screen down, and the apple logo on MBP turns off, if I put it back up in like 5 seconds, it will recover from sleep, but anything after that, I put the screen back up, nothing happens. To make it work, I have to press the power button until the hard drive makes some kind of noise, and then it starts from boot (or from hibernation, like when battery goes out and you plug back in).Nothing is plugged in, same thing happens whether adapter is plugged in or not. Also, my MBP only shows 2gb ram instead of 4gb?? Some odd times, it shows 4gb, but most times, 2gb. It's a 13" 2010 C2D model. Same things happen when I boot into windows using bootcamp.
Info:
MacBook Pro, Mac OS X (10.6.8)
View 1 Replies
View Related
Jul 25, 2010
My iMac goes to sleep and doesn't want to wake up. I have to restart the ugly white thing to continue using it.
View 9 Replies
View Related
Sep 3, 2008
I have Leopard and this started yesterday. I put my computer to sleep. I then click my mouse. My mouse becomes active. Nothing else does. I tap the keyboard, press the power button etc. Nothing. To make it work again I have to force shutdown my computer by holding the power button. I cannot currently find my Leopard disk *sigh*.
View 4 Replies
View Related
May 17, 2012
I recently upgraded my mac mini from 2gb ram to 8gb ram and noticed that when the mac goes to sleep and the tv ( through hdmi wire) goes into standby that the mac mini will not send a signal to the tv anymore to wake up the tv from standby when I need it too from tapping on keyboard or moving mouse. At first I thought it was because of a software upgrade on the mac mini but when I switched back the ram to 2gb the mac mini will send the signal to wake the tv. I hav already reset pram setting and the usual things that everyone has mentioned in other posts . This seems to be a major flaw in apple deisgn unless they have a fix . I am stuck with my 2gb ram now in the mac which doesnt even have any speed . the only way I can use the 8gb ram is if i turn the mac on and off everytime I want to use it , as this is the only way to wake the tv with the 8gb ram inside as it doesnt wake the tv from sleep. This totally contradicts what apple say in their manual aswell, they say not to power down your mac if your using it everyday just put it to sleep which wont help me in my case . So at the end of this rant my only two options are to continue to use 8gb ram and have to power on and off mac everytime to wake the tv or use my 2gb ram which makes the mac run really slow as 2gb is not enough but hey aleast my tv will come back on from sleep mode .
Info:
Mac mini (Mid 2011), Mac OS X (10.7.4)
View 11 Replies
View Related
Jul 1, 2012
My iMac becomes totally unresponsive after sleeping for any length of time. It will not wake from sleep, even if I connect a wired keyboard; and it will not shut down or restart until I reset the SMC by unplugging the comptuer from power for 15-30 seconds. I can restart the computer after resetting the SMC, but the same thing happens every time the computer goes to sleep.
I have also set the computer sleep slider to "never" and reset the PRAM. Although people have been complaining about this issue for months, Apple's Lion updates have not addressed this issue.
Info:
iMac, Mac OS X (10.7.4), 3.06MHz Core i3
View 2 Replies
View Related
Jul 3, 2012
I leave my imac on all the time, I have a wireless bluetooth keyboard and sometimes when I hit the keyboard my imac doesn't wake up. Is this an issue that anyone else has delt with? Is it a keyboard issue or a computer issue?
Info:
iMac, Mac OS X (10.7.4)
View 2 Replies
View Related
Feb 1, 2009
Where and how to setup my MP so it doesn't wake up when I unplug things like iPhone etc from the usb? Is there such an option?
View 4 Replies
View Related
May 24, 2010
I have a new mid 2010 Macbook Pro i7 only had it for 3 weeks, I used to be able to tap/swipe my trackpad to wake my computer from sleep but now its not responsive to it, though clicking it works and the other ways like pressing the keyboard works. Is the trackpad not meant to wake it up? i have also tried a SMC reset/PRAM reset and checking/unchecking trackpad settings no change.
View 13 Replies
View Related
Mar 3, 2012
Is it that there is just too much going on for the system, I have my HD encrypted.
Info:
MacBook Air (11-inch Late 2010), Mac OS X (10.7.3), HD encrypted
View 1 Replies
View Related
Apr 11, 2012
My enter button or any button for that matter, or moving or clicking the mouse doesn't wake up my mac anymore. if I changed a setting or something???
Info:
iMac
View 1 Replies
View Related
Feb 10, 2012
my problem is since the update to 10.7.3, Lion isn't waking up from standby when I have left my external Monitor attached to my MacBook Pro. It will flash the keyboard backlight, but both displays remain black. And when i disconnect the external one, nothing happens. Only possibility to come out of this state: Hold power button for some seconds until it shutds down "hard".
View 7 Replies
View Related
Feb 10, 2012
my problem is since the update to 10.7.3, Lion isn't waking up from standby when I have left my external Monitor attached to my MacBook Pro. It will flash the keyboard backlight, but both displays remain black. And when i disconnect the external one, nothing happens. Only possibility to come out of this state: Hold power button for some seconds until it shutds down "hard".
View 2 Replies
View Related
May 29, 2012
I have latest iTunes 10.6.1 and its library located on external drive, connected by FW800.
System properties -> Energy saver -> Put the hard disk(s) to sleep when possible is On Everything works perfect in case of local access.
Also in case library's drive sleeps, it takes just several seconds more in order to wake drive. But remote access works only in case the drive is waked somehow. I.e. if Home Sharing is enabled and drive sleeps I cannot get access to the content from remote iTunes or Apple TV.
I think it is a bug, remote access shall be not broken in case the drive is sleeping. Also it is known, some forums explain that you shall never put external drives in sleep mode in case this drive used for iTunes Home Sharing [URL]
Info:
Mac mini, Mac OS X (10.7.2)
View 3 Replies
View Related
Aug 8, 2009
I have 2 external HDDs that I am sharing with other PCs/Macs over the network. Interestingly, when I look up the info for each volume, only one shows as NTFS-3G whereas the other one shows as just NTFS. And this NTFS volume is causing so much trouble. It doesn't wake up after it goes to sleep, and when I power-cycle it, the data I have put in previously is gone! It doesn't seem to save the data properly. Perhaps because it's just NTFS, not NTFS-3G, I cannot run "Disk Repair" from the Disk Utility app. The button is disabled whereas for other volumes, the button is enabled.
At one time, I had to connect it to a PC to run the disk repair and was able to recover some of the lost data. What the heck is going on? Howcome it is showing as NTFS opposed to NTFS-3G? Both HDDs were formatted from PCs as NTFS. Only difference is that the NTFS is 750GB one, and NTFS-3G one is just 300GB. Does NTFS-3G has size limit?
View 3 Replies
View Related
Apr 2, 2012
my laptop (macbook pro) doesn't turn on, because the battery doesn't work (may be because of moisture), and the 7 battery lights on the left side are off, and when I plug the charger in, the light on the magnetic socket turns on so dim ..
Info:
MacBook Pro, Mac OS X (10.7.3), MC 700
View 2 Replies
View Related
Apr 16, 2012
I have macbook pro And my mail has stopped working now. It worked fine a week ago . It doesn't check for new mails , even when I click on get new mail , there is no new mail. I tried to sign out and sign in again but that didn't work . I read few articles on the internet but they all said use the Mac OS X DVD and reinstall but I didn't get any DVD , all I got with my computer was a Manual.
Info:
MacBook Pro
View 7 Replies
View Related
May 9, 2012
This just started yesterday. My wife's MacBook pro will not wake after sleep. The screen remains black though the keyboard lights up. No amount of tapping on the keys or trackpad lights up the screen. When I restart, all is well again. What do I need to do?
View 4 Replies
View Related
Jun 6, 2012
I have a macbook pro running 10.5. it will not wake up after a powerdown or sleep. I have tried the apple resets but it only comes on after pushing the start button about 50 times. I can hear the fan and the light from the push button comes on.
Info:MacBookPro, MacOS X (10.5)
View 1 Replies
View Related
Nov 14, 2010
I really want to put some short start up sound, mp3 if possible. I mean I am opening my lock and than I hear for example a car engine sound, possible?
View 2 Replies
View Related
Jul 11, 2007
I put my 3 day old MBP to sleep last night with a 90% battery level (with the A/C adapter unplugged). I had calibrated the battery the day before. This morning, when I opened the lid, nothing happened. I thought this was odd. I then pressed the power button and heard about 1 second of the startup tone and then nothing. I repeated this twice more with the same result. I then plugged in the A/C adapter and the MBP booted up. The battery level was 86%. What do you think has caused this? Do I have a defective battery or something more serious?
View 22 Replies
View Related
Jan 8, 2009
Occasionally my Alu Macbook won't wake up from sleep. The keyboard backlight comes on, but the display won't wake. Sometimes the machine is quite hot and the fans are blasting too. Only a power cycle will fix it and then there's a message about OS X restarting unexpectedly.
View 7 Replies
View Related
