I'm using the MiniDisplay port to HDMI on my MacBook Pro and connecting it to my 720P Dynex HDTV.
All my MacBook Pro does is flicker 3 times for about 8 seconds that it goes back to normal.
Macbook air 2014 model screen flickers when ever it is connected to minidisplay port to vga adapter?
Info:
MacBook Air (13-inch Mid 2013), OS X Yosemite (10.10.1)
My macbook pro (mid 2012) has started flickering badly upon boot-up. The display also jiggles up and down on occassion when loading web pages. I have upgraded to Mavericks and my MBP is usually hooked up to a large monitor. Problem just started happening.Â
Info:
MacBook Pro, OS X Mountain Lion (10.8.2)
My external display (HP w2207) seems to conflict with my MacBook Pro (15 inch Retina display, early 2013) since I upgraded MacBook OS to 10.9.4.The external display works at initial boot of Mac but does not work after OS sleeps and I attempt to awaken, and while the external display is not waking, the Retina display flashes through different screen views, which only partially reflect my normal screen, or do not reflect my normal screen at all.Â
Info:
OS X Mavericks (10.9.4)
My screen just started to occasionally have a flicker of a white line show up...It doesn't happen that often, should i worry? Is it worth taking it into apple? (Under warranty still) Since its not consistent i wont necessarily be able to show them what its doing..
View 1 Replies View RelatedHow can i connect macbook air (current model) to a external display? I have a view sonic display that claims to be mac compatible. It came with a USB cable. But when i hook it up, it shows no activity. In system preference, i hit detect display, doesn't seem to do anything.
View 6 Replies View Relatedeverytime when i turn on my macbook, the top part of the screen flickers.. I don't recall seeing that happen when i first got my macbook. anyone else have the same issue? something i should worry?
View 3 Replies View RelatedI'll cover the background to when this started happening.
I took my macbook out of an outer case to clean the shell itself.
I used wet ones which have alcohol so I wasn't worried, but also wasn't careless.
I once got a screen that said I needed to restart my computer. So I did.
Whenever I move my macbook on my desk with the lid open, or when I open the lid, or when I close the lid, my screen flickers to black and then back open many times. Is this a weak connection some where? Sometimes the screen will stay black until I move the lid a little bit. I bought it refurbished from Apple this spring. I do not have applecare.
View 2 Replies View RelatedI bought a 22 inch monitor. its a pretty generic brand, but its very high resolution and works great on other computers. i got the vga adapter for my aluminum macbook (i posted in this section because its closer to the 13" mbp). i have an apple keyboard connected to it. i try to use it in clamshell mode and when i press a button on the keyboard to wake it up the screen just flickers as if its trying to adjust the resolution. strangely enough, it works perfect in mirror mode. anyone have an idea?
View 2 Replies View RelatedWhenever i tilt the screen forward or back wards like the whole screen flickers i dont know how to explain it but like as if you were turning a tv off that shuttering moment? well that similar thing happens but when i move my screen. The computer works fine and everything but its just that i have never dropped it or nothing so can anyone tell me why this is happening and what i should do.
Info:
MacBook, Mac OS X (10.6.8)
I Late 2008 Macbook Pro. My needs have shifted lately, as I am now using it mostly with an external display. I ran it into my 23(?) LG 1080 LED monitor with no problem. I recently bought a Samsung 27' Syncmaster SA550 monitor. I am in love with it, however I cannot find a display size that fits the monitor. I am currently running the 1080p resolution setting on my computer but it is easily 2-3 inches too small. And with overscan its too big to see my menu bar and dock at all. Running at a 24-25' screen size is still much better than my 15 inch macbook pro screen, but it would be awesome to use all of the 27 inches of this monitor. I have been unable to find a working setting, if there is a trick, or a way to setup a custom size As well I am running this as the sole display (not dual screens)
Info:
MacBook
Pro, iOS 5.1, External Display: Samsung SA550
I have two questions:
1. Is it possible to use two external displays either mirrored or not and turn off the retina display, and if so how it is done?
2. Is it possible to close the MBP and use an external keyboard while using two external displays?
I am using a music production DAW Persons Studio One-2 Pro and it would be great to be able to have this type of a setup.
Macbook Pro 15" Retina display I7 2,3mz 500gb SSD late 2013 OSX Yosemite 10.10.1
Info:
MacBook Pro (Retina, 15-inch, Late 2013), OS X Yosemite (10.10.1)
She has a 2008 Aluminum MacBook, the standard 2.0Ghz model. Occasionally when she moves the screen or tries to angle it, it flickers. This doesn't happen every time.
I honestly haven't tinkered with any Mac laptops once the unibodies came out, so I am hoping someone can shed some light, give some advice, and maybe throw out some ideas for repairs.
Recently my Macbook Pro 2008 is having following problem. First there are wavy blurry lines appears on screen and then it freezes for a while and then it restarts its own. On restarts it gives following message.
Your computer was restarted because of a problem.  Anonymous UUID: 1AC08BAD-9416-4033-A800-666876C27348Â
Sun Jun 29 21:05:35 2014
panic(cpu 1 caller 0xffffff7f8cf27e90): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0x040710de 0x00100406 0xd2000000, BAR0 0xd2000000 0xffffff80a6c73000 0x084700a2, D0, P2/4
Backtrace (CPU 1), Frame : Return Address
0xffffff80a58fb440 : 0xffffff800c422fa9
0xffffff80a58fb4c0 : 0xffffff7f8cf27e90
[code]....
I am looking at purchasing an Ibook G4 but the description of the item includes this:"When you switch it on it begins to load up i.e. the blue screen with the Apple logo, but then the screen goes black or flickers. Said friend has kindly wiped the hard drive for me so now when you switch it on it makes the �opening� noise then you get a blue screen with alternating �?� and the Finder logo."
I have a feeling this may have been a temporary fault with the screen connector being loose and possibly damaged.But i assume the alternating "?" and the "finder logo" is simply a lack of OS?
I just got a new MBP i7, and whenever the graphics switch from the Nvidia 330m chip to the Intel chip, the screen "flickers" black for a short moment before reappearing. Can anyone with a new MBP comment on this behavior? It doesn't happen on the switch from Intel->Nvidia, just the other way around.
View 3 Replies View RelatedI just got a displayport to dual-link dvi adapter for my 2011 mac mini. Using a HP LP3065 display, and it keeps flickering! Is there something I can do to make it stop? Does the adapter have firmware that can be updated?
Info:
Mac mini (Mid 2011), Mac OS X (10.7.3)
I've found that my 24" display just isn't big enough for the currents applications I'm using. Could I use the following to attach either a bigger monitor or my projector to the iMac?
[URL]
My Dell u2711 is my primary display. Sometimes I wake up the macbook out of sleep mode and forget to have the lid shut. Consequently the Macbook screen comes on as well. Everything is working as it should but I am curious is there a quick way to switch the Macbook display on and off with the setup I have described?
View 11 Replies View RelatedThis is my first week on Mac. Periodically the screen flickers & hangs for a while after that it's back to normal.
View 10 Replies View RelatedI am attempting to use an external DVI monitor using the mini port port and the mini port DVI adapter sold by apple. However the screen display on the external monitor does not match the Mac book display. All I get is a color Mac opening screen with no icons.apparently there is more to getting an external monitor going then just plugging it in.
View 2 Replies View RelatedMy screen flickers all the time. It goes blank and sometimes it takes a while to go back to normal. It is ot 100% anymore. The computer works perfect, but screen doesn't
View 7 Replies View RelatedI just bought mac mini few weeks ago everything is great apart from every now and the the screen goes black for a second.
View 1 Replies View RelatedLast night I was working in Adobe InDesign and Photoshop when my screen began to flicker like crazy and eventually froze. I could still move the cursor around but nothing would work. I couldn't force quit any of the applications or shut down the system. It eventually shut itself down and after restarting everything seemed normal. About 20 minutes later it did the same thing as I was switching between Safari windows using Expose'. (I recorded a small clip of the flickering and put it on youtube if that helps: [url]...?v=UBjRwRu4IOg ) After the second time this happened I again tried to start it up and it loaded to a gray screen, no startup chime, no apple logo. Nothing. I hit the power button and it shut down again. And the next time it booted all the way. I then shut it down with the intention of calling Apple Care today but apparently my Apple Care ran out in the last month or so. So, I'd have to pay $49 to talk to them about this issue. I thought I'd come here first.
[code]...
Info:iMac, Mac OS X (10.6.8)
I have a early 2011 MacBook Pro 13" running the latest version of Lion. I have been using my MacBook with an external monitor since I brought it in 2011 and have had no problems with connecting it to my external monitor. Connected via mini display port DVI adapter and a DVI cable to a Philips monitor.
Two days ago when I plugged the MacBook back in to the monitor I connected and but now only displays a black screen, I can move the mouse off the MacBook screen and over to the external monitor and back but it is not displayed on the monitor. I have tried connecting other devices to the monitor and they work fine.
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7.4)
I have a MacBook Pro 13 for portability to my classes at the university and a Dell 2209WA as an external monitor. One of the few good IPS monitors I could find around for cheap.
The monitor works fine in mirror mode with the MacBook Pro, but as an external display only it does not work. It attempts to wake up and then you see power savings mode again and the screen goes black as if there was no connection. Not sure what exactly the problem here is. Drivers?
The monitor works great with a Mac Mini I have and it works great in mirror but not in external display mode(the lid of the MacBook Pro closed). Anybody know of this issue? The cable is good and the MacBook Pro is not that old(a few weeks).
Well my unibody macbook display decided to screw up last night, it was working fine last night no problem. Connected to a external monitor. I fell asleep last night with front row left on, obviously it went to sleep and then I woke up and the screen was black. Now the LED lights are working, my external display is also working. The display settings recognize a screen being present (when I click detect displays and gather windows - 2 windows appear). Ive reset PRAM, SMC, reseated the RAM, control+shift+eject (which just made the screen flicker a little after turning it back on) and Im out of ideas. Its out of warranty and about about 18months old.
View 4 Replies View RelatedI have a broken screen on my MacBook air and have an external screen attached via thundbolt and hdmi connection when I boot up the unit it only shows second screen on external no dock or desktop so can not see system preferences or anything, need to find a way so then when I boot up system the external automatically comes the default screen
Info:
g5 iMac, Mac OS X (10.5.8), W85270KTSDZ
AppleScript perhaps - to allow either auto-switching of the main display, or enabling 'Mirror Displays', when Front Row starts?
Normally I have my MBP setup in extended desktop for when I connect my external monitor or connect to my TV (DVI->HDMI adaptor) for watching BBC iPlayer etc., however I want FR to run on the external monitor/TV if one is detected.
