MacBook Pro :: Repeated Crashes Even With New Hard Drive?
May 25, 2012
My old and trusted 2007 MacBook Pro (10.6.8) has been experiencing repeated crashes for the last few months - the quick type of system crash where the screen goes blue and then the OS pops right back up but with all the applications shut down. I took it into the Genius Bar this week and after running a diagnostc on it, the rep said that my hard drive was failing and that was the cause of the crashes. They wouldn't replace the drive for me as it wasn't the orignal one (I had upgraded to a 500GB 7200rpm drive a little over a year ago). Â
That replacement drive was out of warranty (of course), so I purchases a new 640GB drive from another dealer and replaced it myself. I also made sure to make it a 5400prm drive this time as the 7200rpm just ran too hot for me and I though that could have been one of the reasons that led to it's apparently impending demise.Â
Anyway, less than 24 hrs from installing the new drive, the system just experienced another of those crashes. Now I'm at a loss. Can anyone possibly offer some advice?Â
Info:
MacBook
Pro, Mac OS X (10.6.8)
View 5 Replies
ADVERTISEMENT
Oct 6, 2008
I have a white mb 2.4 250 GB SD. Purchased new in late feb. The hard drive went bad in september. Then in october it happened again. My question is how many time does the hard drive have to go bad before i can get a new computer? If apple updates the macbook how do they determine which config i would get as a replacement? How would it affect apple care? i have registered it already.
View 10 Replies
View Related
Feb 13, 2012
I'm having repeated crashes, most recent was MAIL.app and while puting together this request my CONSOLE crashed! All with the same Type & Codes! I see a number of referrences to this type of issue but the answers don't seem to fit my issue.
[code]...
View 4 Replies
View Related
Sep 23, 2010
I have a MBP1,1 completely updated and OS 10.6.4 is now experiencing repeated hanging sessions where the beach ball shows up for 20 seconds at a time. I tried repairing the disk and repairing permissions, both with the disc upon startup and just running OS X normally. However, each time I repair, the same 3 files are always fixed and a 4th file that was not being able to be repaired at all. I don't think it's RAM problem because Windows runs smoothly, but this issue is frustrating. Should I just reinstall OS X.
View 11 Replies
View Related
Dec 16, 2010
I have an iMac7.1 with Intel Core Duo, 2.8 GHz, 4GB Memory. I'ts crashing occasionally without any related program start or running, or at least I never found out any relation between software or operating system. I had these with the old tiger 10.4 system and it's continuing with Snow Leopard 10.6 - This is what happens: Just in the middle of my normal work (sometimes I don't even do anything at all), I recognize that the harddrive stops spinning (I can tell from recognizing that the low humming noise from the drive just goes away). After that, I can click on active window, but see the spinning beach ball. No matter how long I wait, this is not changing so that I have to turn off the iMac by holding the power key for a few seconds.
After reboot, all works fine. Yesterday I had another crash just a few minutes after reboot. But in most cases it works fine for another day or two until it crashes again. I already ran DiskUtility (no harddisk errors found) and tech tool deluxe without finding any problem. In old Tiger 10.4 I needed to run a disk repair after each crash (obviously due to shutting down the system using the power switch), since Snow Leopard I never had to use disk repair after reboot. Maybe anybody can give me a hint if there is something I can do about that. Apple care don't help me much, because I don't have an apple store nearby and I don't own a car to bring the machine in.
View 1 Replies
View Related
Feb 14, 2008
wouldn't even load. It would just show the little blue "light" flashing on and off, as if Finder were launching, crashing, launching, crashing.After some deduction, I found the problem to be my USB WD hard drive. It used to previously work fine. It has only one partition on it, which is HFS+ formatted. Disk utility verify/repair reports that the drive is fine.
View 8 Replies
View Related
May 9, 2009
1. I plug in my 2.5" external hard drive. It appears in Finder. I can see the contents of the main directory. 2. The moment I CLICK on any folder/file, I get the beach ball and Finder crashes. This is the only time Finder crashes.I've searched the forums but all the results are old and no solutions have been found.
View 2 Replies
View Related
Dec 21, 2009
I just had the original 300 GB hard drive fail in my aluminum 24" inch iMac running the latest update of Leopard. I wasn't able to save it using diskwarrior (diskwarrior said it was some sort of mechanical failure) but I was able to recover most of the data from it by booting from an external hard-drive.
So I went out and purchased a brand new Western Digital Caviar Black 1TB drive. The install went fine, it found the drive partitioned it and installed Leopard successful. Then is crashed and disappeared when I left it alone to run all the software updates. I came back and the computer was stuck on "Restart Required" after downloading all the updates. I went to hit restart now, and the system just hanged, wouldn't do anything. So I hard powered down the system and restarted it. It came up with nothing, just stuck on the White Screen of Death. So I plugged the external drive back in and booted from it. Mac OSX couldn't find the drive and diskwarrior would crash if I tried to run it. I tried to boot up from the OSX start-up disk and it couldn't find the drive either.
So I took the case apart and made sure all the connections were solid and the drive was mounted correctly. Everything looked fine so I plugged it in and it started up fine. Finished the updates and the iMac ran great.
So I thought maybe it was overheating, so I've installed smcfancontrol and started to monitor the temp of the drive. I also took the mac apart again and sucked out any dust in the fans or vents. The drive never goes over a 105 F, so it doesn't seem to be overheating.
However, this is where the problem is consistent: everytime the iMac goes into sleep mode, it crashes and the iMac is unable to find the hard-drive again. Unless I unplug it completely for 5 minutes or so. Once I unplug it, it finds the drive and operates like a champ.
I think maybe there's an issue powering the drive back on? Anyone have any ideas?
And my follow up posting later that day:
Quote:
So I ran some tests just to see if was an overheat issue, hard drive malfunction, or sleep issue. I decided to start encoding a video, pulled up Word, Power Point, Excel, started downloading all 6000 mail messages off my server (I never delete my e-mail :-/), also started installing iLife 09, and pulled up a bunch of webpages in Firefox with multiple tabs.
However, I shut off all sleep mode options on the hard drive. I let it run for an hour and came back. Everything is fine, hard drive isn't locked up and smcfancontrol shows the hard drive running pretty hot (115 degrees) but not so hot I'm worried. So it's definitely something to do the hard drives going into sleep mode and not powering back on. It's also weird that I have to leave the computer completely unplugged for 10-15 minutes before the drive is recognized again.
So turning off sleep seems to be my work-around, however, this shouldn't be a long term solution. I'm worried that there is a bigger issue with the iMac, but I'm not sure what would cause this. I've been a PC guy for years, this was my first Mac, and honestly I don't know enough about the inner workings to narrow this down. I would assume this would have to do with the motherboard in some way? But I'm not sure how you would even test it.
View 6 Replies
View Related
Sep 1, 2009
Got a new MBP last month to replace my white MacBook - loving it as an upgrade but one gripe - if I'm sat using it on my knee I regularly hear the "click" type noise of what I imagine is the protection of the hard drive because it thinks it is being dropped.
I never heard this on my old Mac and while it's not a huge issue it is a bit disconcerting, as though I'm being told off for moving it in a fairly responsible way.
View 5 Replies
View Related
Jul 27, 2009
I have an aluminum unibody macbook from October 2008. I'm looking to upgrade the 160 GB hard drive inside to a 500 GB one I'm considering from Newegg. Would it be possible to migrate/copy/clone the entire contents of my current hard drive to the 500 GB one? I also have a section of my current hard drive partitioned for Bootcamp. Would this affect my ability to transfer everything over?
If this is possible at all, how can I go about doing so? If there are steps laid out somewhere, I'd appreciate a referral. Sorry if my question is a little elementary, but I did a search on these forums and also google and nothing really came up
View 1 Replies
View Related
Feb 11, 2012
Howdy -- I've been having some problems with a 2010 MBP. Some very hard crashes along with a lot of slowdowns and spinning discs while using the various browsers (usually some combination of Safari, Chrome & Firefox)... I ofren have M'soft Word open as well. Â
In some crashes, the cursor still works but that's it. Nothing else on the screen responds or reacts and I eventually have to hold down the power button. I'm using Lion, but I did exeperience some of these problems before ugrading.Â
[code]...
Info:
MacBook
Pro, Mac OS X (10.7.3)
View 5 Replies
View Related
Mar 31, 2012
Recently I bought 2 identical WD Scorpio Blue 1TB hard drives for my macbook pro 13 inch 2010. My aim is to replace the internal hard drive with one of the two I just purchased and use it as my system drive with Lion, Windows and Data partitions. And for the other hard drive I want to use it as a full disk back up for the internal drive (now 1TB hard drive). After I was done with setting up both windows and mac and data transfer, when I booedt into the recovery partition from the internal drive to clone the drive to the external drive, the disk utility gave me this error (Could not validate source - error 254). I also tried using Carbon Copy Cloner but it only could clone partitions, not the entire drive. Yesterday I downloaded a copy of Clonezilla. It worked fine until it had to clone an exFAT partition (my data partition). The exFAT partition appeared as 'RAW' partition in clonezilla. As a result, the whole partition appeared to be full and clonezilla had to copy every single blocks of data in that partition and the estimated time remaining was about 30 hours. So clonezilla is out too. Just want to ask if there is any program/application (bootable or not) which allows can do a full disk clone to an external hard drive.
View 1 Replies
View Related
Sep 9, 2014
Macbook Pro 17" Early 2011Â
Notes. Failed HDD ASD Test.  A new hard drive was installed in September of 2011 after the previous hard drive failed. Having worked well until now the system seems to give the same problems as it had previously. I am wondering if this is a compatibility issue as others have pointed out. Â
I have been told by the technician my only option is to replace the entire hard drive again for the second time with a new one. However to my understanding a ASD test is very specific and this my not be necessary? Further I am attempting a final backup just in case. I don't have to take it in where I could just back it up myself without the system shutting down.
Info:
Mac Pro
View 5 Replies
View Related
Apr 5, 2009
i bought my macbook last thursday its my first mac and i love it but i have a question i thought the macbooks where suppose to hace 2gb 1066 mhz but when go to about this mac it says i have 1067 is this normal or is there something wrong?
also last night when i was about to shut down my pc i went to the little apple but there was something weird
every single thing was reapeated
sleep
sleep
restart
restart
shut down
shut down
etc
etc
what wrong?and its not there anymore
View 4 Replies
View Related
Mar 19, 2012
Several times in the last few days the startup page has frozen. Following the instructions in the little instruction book I power down by holding the power button, wait a few seconds, then power back up while holding down the option key, and with all peripherals disconnected. I get a screen with two icons, "Macintosh HD" and "Recovery HD". The instructions say, "click the internal flash drive icon." Assuming that means the "Macintosh HD" icon, I click on that. That brings up a new startup page. Usually that is not frozen and I can sign in. Occasionally this second startup page is frozen too, so I repeat the power+option powerup. Whenever I have to resort to the second try I get an unfrozen startup page.Â
Once signed in I go to System Preferences and click on Startup Disk. Always after a frozen startup page I find this preference unlocked and the "Macintosh HD OS X 10.7.3" highlighted. I click on the icon, lock the preference again, and all works fine for the next one or two startups, then I get the frozen startup page again. One time on the power+option powerup I clicked on the "Recovery HD" icon rather that the "Macintosh HD" icon. All I got then was the blank Apple logo page with the revolving gear going on interminably. After several minutes I gave up on seeing what that would produce.Â
Info:
MacBook Air, Mac OS X (10.7.2)
View 2 Replies
View Related
Sep 11, 2009
I'm replacing my old 120gig hard drive with a new 320gig hard driveWhen Ive got the new hard drive installed can I just put the old hard drive in a enclosure kit/caddy and copy my music/movies/etc across to the new hard drive?Or do I have to copy the data off before I remove the old hard drive?
View 3 Replies
View Related
Dec 31, 2009
I recently installed os 10.6 on my MacBook, upgraded to 10.6.2 and everything was still working fine. Then, without thinking, I ripped out my shuffle and plugged in my mirrored (software) raid array of 2 drives. I immediately got the dimmed screen / you must restart your computer in all languages-screen. Now, whenever I plug in the raid into the usb the computer's screen goes dim and I get the same error message in all languages. I've tried booting with the install disk, still crashes. I have all my most important files on that drive.
View 1 Replies
View Related
May 31, 2009
but free anyone knows one i only find ones that you have to buy.
View 1 Replies
View Related
Mar 8, 2012
In both Snow Leopard and Lion, I am experiencing start-up disk failures that cannot be repaired by disk utility. Does anyone know what can cause this?
Info:
MacBook-iPhone, iOS 4
View 5 Replies
View Related
Jul 6, 2012
I've just received my new MacBook Pro with Retina display last week and I'm very happy with it. But there's one issue... my Thunderbolt cables keep failing!Â
I bought a Seagate GoFlex for Mac drive with the GoFlex Thunderbolt Adapter and an Apple Thunderbolt cable. The first cable failed after about an hour of operation (intensive copying of data onto the drive). I took everything to an Apple Store and they determined that the Thunderbolt cable was the culprit. They gave me a new one and I went home.Â
... just to have the same thing happen again the next day. This time the cable held up a little longer, maybe five hours until - again - the drive failed to be recognized and the new cable went bad as well!Â
I just came home from the store and this time, they swapped everything: drive, TB adapter and TB cable. I hope it won't happen again...
Info:
MacBook Pro
View 2 Replies
View Related
Apr 26, 2010
Awhile back this MBP 17" Hi-Res was dropped on the upper left corner. After that the backlight no longer functioned properly. I first tried replacing the inverter board which didn't help. I finally got around to replacing the whole screen today. Fired the thing up. Display looked great. It worked for about an hour before I heard a weird noise from the computer and the backlight went out again.
View 2 Replies
View Related
Sep 8, 2014
Unlocking my external hard drive crashes my computer. It was encrypted by Time Machine (and I think that means it used FileVault because the unlock window has the FileVault icon). Â
There's a prompt to unlock the hard drive as soon as I plug it in but when I press the Unlock button my computer crashes. Â
I've tried different user accounts, safe mode, disk utility, recovery mode, different USB cables and different USB ports all with the same problem. As soon as I press enter on the password prompt the system crashes. If I type the wrong password it denies me so I know the password is correct. Â
The drive is in a SATA to USB dock but unfortunately I don't have another one to test with. Other drives work just fine in this dock.Â
The data recovery software I tried is useless because all the data is encrypted .Â
Info:
MacBook Air (13-inch Mid 2011), iOS 7.0.4
View 3 Replies
View Related
Apr 18, 2012
All day, I am able to use the internet (via WiFi connection) at the library. But when I get home, I can't connect to my home WiFi connection. This was never an issue before. I have done all of the obvious things (resetting my router, clearing saved connections from my computer and joining a 'new' network, check and installed all updates, etc etc), but nothing seems to work. All the other devices in our house are connected to the WiFi just fine.
I run the diagnostic and I'm only green on WiFi and WiFi settings, with network settings and ISP fluctuating between yellow and red, and internet and server is always red. I have tried DHCP Lease renewel (which usually does the trick when I am getting an invalid IP address (169.xxx.x.x) until I get a valid one (192.xxx.x.x). But now sometimes I'm not even getting an IP at all! All I wanna do is unwind, check/reply to emails just surf the web to decompress after my long days.
(Running Lion 10.7.3; 2.66 GHz Intel Core 2 Duo; 4 GB ram (soon to be 8 )
Info:
MacBook Pro (15-inch Mid 2009), Mac OS X (10.7.2)
View 1 Replies
View Related
Sep 6, 2009
Today I went to plug in my Lacie 250 GB USB external hard drive into my 13 in. MacBook to get a shirt template for a design I am making. I discovered that the hard drive just would not mount and show on the desktop, and I remembered that this happened a few days before, but all I did was unplug it and plug it back in, and it worked... except that today, that didn't work at all. I tried the other USB port, and the hard drive showed up on the desktop for about a second, and then disappeared. I kept on replugging it back into both USB ports, but nothing happened.
Then I tried to see if it would work on the PC beside me, and it was recognized as an external device; however, a message came up telling me the drive was malfunctioning. I am guessing this is from ejecting it incorrectly (because I am in a hurry to head to my next classes...I use this laptop at school), but I have incorrectly disconnected it before in the past and this problem never happened to me before.
Every single project I have ever created for my design career is on that hard drive, and all I want now is to get my files back. All I need it to do is show up on the desktop for just the right amount of time for me to copy my files onto my computer.
I read online to put it into the freezer for a while and it should mount, but that didn't work. I tried using Disk Warrior, Data Rescue 3, and Tech Tool Deluxe, but the hard drive did not show up on any of those apps.I tried plugging the hard drive into an iMac as well, but it did not show up either.
View 3 Replies
View Related
Oct 2, 2009
I bought a new 500GB WD hard drive for my Late 2008 MacBook to upgrade from my 250GB drive. I have a hard drive enclosure, but I was wondering if when I install my 500GB hard drive, would I be able to use the enclosure to transfer files from my 250GB drive? I hope this was specific enough to get a clear response. If not, I'll try re-wording my question.
View 7 Replies
View Related
Sep 9, 2009
My PowerBook G4 (Alum) died. I've had it for 4 years, taken it with me to Alaska and all over the lower 48, and have had nothing but happy experiences. I knew she was gonna go, but I was hoping she'd hold on until I could afford a MacBook. Alas, no. The problem appears to be the ability of the logic board to communicate with the hard drive. I can hear the HD spin, but even with Disk Warrior, I cannot locate it. The Mac Geniuses at my local Apple store confirmed this and gave me a shoulder to cry on. I've run Disk Warrior, Disk Utility, and tried finding it using the target disk mode - no luck.
The problem is that I've got 4 years of teaching materials, 6000 songs, and irreplaceable pictures on the HD, so I can't bring myself to just trash it. It's true that you only fail to back up you stuff once. This is my once. I've heard that with PC hard drives, you can just drop the old HD into a USB HD box and use it as an external HD. I can't afford professional data retrevial, and I want to give this option a try if it'll work with a Mac HD. Any ideas or suggestions?
View 7 Replies
View Related
Jun 3, 2012
How do i play media files from my external hard drive without transferring the files to my mac hard drive? I have a lot of media files and want to be able to play them soley from my external hard drive.Â
Info:
iMac (27-inch Mid 2011), iOS 5.1.1
View 2 Replies
View Related
Nov 22, 2006
My PM G5's Hard Drive has been making wierd noises lately and I'm really beginning to worry that it's failing. How can I be sure?
View 1 Replies
View Related
Sep 9, 2009
I know this is going to be an incredibly easy fix, but I can't find it. The Hard Drive on my new iMac is not appearing on my desktop, nor is it appearing in the "Device" menu in Finder.
View 1 Replies
View Related
Nov 12, 2009
if i delete files off my internal hard drive (Macintosh HD), will it still be on my external hard drive or will it just add to it?
View 1 Replies
View Related
