After Update to os lion 10.7.4 on 11t may 2012 my keyboard "h" doesn't work anymore. I only can type a "h" by copying it from another text and paste it into my text.
Info:
Mac Pro, Mac OS X (10.7.4)
It used to work for me when i press a combination of Ctrl+F2 to activate the menu bar, now it doesn't work anymore, even if i try a further key: Fn+Ctrl+F2.
View 2 Replies View Relatedwhere is the problem- my copy and paste doesnt work anymore. Neither shortcut cmd+c/cmd+v, nor any other way. I used it often and there was no problem before.
Info:
MacBook Pro, Mac OS X (10.7.4)
I've had my MacBook Pro for 2 years and my SD card always worked in it as did every other camera card that I have used. Recently my SD Card slot stopped working and i'm not sure if I go into the Apple store if they can do anything (i have an apointment on Saturday at 5PM)... basically my question is do you think they will have to replace my computer, or will i have to leave it there and they will repair it?
Info:
MacBook Pro, Mac OS X (10.6.7)
I want to take a screen shot, and combination of command+shift+4 use to work. Not any more.
Info:
MacBook Pro (Retina, 15-inch, Late 2013), Mac OS X (10.7.5)
All of a sudden my keyboard copy-paste (control C control V) does not work anymore. I have to use the dropdown menu copy and paste instead.
Info:
Macbook, Mac OS X (10.5.1)
Model Name: MacBook Pro
Model Identifier: MacBookPro8,2
Processor Name: Intel Core i7
Processor Speed: 2.2 GHz
Number Of Processors: 1
Total Number Of Cores: 4
L2 Cache (per core): 256 KB
L3 Cache: 6 MB
Memory: 4 GB
Boot ROM Version: MBP81.0047.B27
SMC Version (system): 1.69f4
OS X 10.6.8
So a week ago I opened Photoshop and my macbook froze and gave me this screen:
I had to force it to shut down, and when I turned it back on, I'd get the chime, I'd see the logo and the spinning cog, then it would go to a white screen and either stall or shut itself off... I tried resetting the PRAM and SMC. I went into Disk Utility and verified the disk and the permissions. I also reset Photoshop's preferences, and completely reinstalled it. Booting in safe mode worked, but of course it's a little slow and I can't use some programs. I was able to start up normally by booting in single user mode and running the /sbin/fsck -fy command a couple times.
I ended up taking it to a Genius Bar, they ran a couple diagnostic tests and confirmed it wasn't a hardware issue and it was probably the OS. They reinstalled Snow Leopard, I restored my stuff with my Time Machine backup, and everything worked fine for a couple days.
But today when I turned it on, it shut itself down again! And running single user mode doesn't work anymore. It'll say "The volume Macintosh HD appears to be OK." and when I reboot, it shuts down at the white screen. Now the only way it will boot up is in safe mode, and if I close the lid to put it in sleep mode, it'll turn itself off after a few minutes.
I'm not incredibly tech savvy, but I'm wondering if it could be a third party program. I'm not sure how to find out which one is causing the issue, though... I've uninstalled SMCfanControl and StartupSound.prefpane. Those are the only two I can think of that could potentially mess with the startup...
Info:
MacBook Pro (15-inch Early 2011), Mac OS X (10.6.8)
It used to work with Snow leopard.. but now it crashes on login any ideas??? i first thought it is afloat (plug suite) but i disabled it...(and unistalled) I Think the "the tube" Update messed skype up but... maybe you know it better
Code:
Process: Skype [2732]
Path: /Applications/Skype.app/Contents/MacOS/Skype
Identifier: com.skype.skype
Version: 2.8.0.659 (2.8.0.659)
Code Type: X86 (Native)
Parent Process: launchd [685]
Date/Time: 2009-09-14 09:09:35.319 +0200
OS Version: Mac OS X 10.6 (10A432)
Report Version: 6...........................
Since 2 days ICQ doesn't work together with iChat anymore. All I get is the prompt for entering the password. Password is correct and ICQ still works with Adium or ICQ2GO. iChat probably stopped working after I installed the latest security patch for MacOS Leopard.
Deleting the ICQ account in iChat and adding it again doesn't work. Neither does deleting the AIM.plist or changing the server to [URL] like it was suggested at the Apple discussion board.
I'd like to empty my trash, but it doesn't work anymore. The trash icon in my dock indicates that there are files in it, but when I click on it the Trash window appears, but the files don't show. The indicator at the bottom right just keeps on animating - it never stops, not even after several hours. furthermore, the "Empty Trash" option in the Finder menu is grayed out. The "Empty Trash" option in the trash icon's right-click menu is not grayed out. However, when I click it, a dialog appears for confirmation; I click on "Empty Trash" and nothing happens. When I list the files in my trash using the terminal (with the "ls" command), the files do show (and there is a considerable number of files). When I try to remove them, using the "rm" command, nothing happens; when I list the files again, they are still there. What must I do to get this mess fixed?
View 2 Replies View Relatedi have a problem with my Snow Leopard installation. Since I've installed Snow Leopard, my external USB HD won't work anymore. It's a ICY BOX case with USB 2 and Firewire 400 interface. The mac is a mid 2009 mac mini (9400m).
P.S.: It doesn't show up in the disc utility
PP.S.: I tried two different hard drives in the enclosure, but all worked fine before Snow Leopard!
I have a bluetooth remote presenter. It has the usual keys (next, previous, volume, play/pause, start default music player) and it also has a small touchpad / trackpad with left and right buttons, scrolling buttons.
The remote is great and it served me well under Windows and OSX 10.6.8 Snow Leopard. Now since I bought a new machine with Maverics, I can't pair it. The bluetooth utility looks different on Mavericks. Certain things missing, such as making Bluetooth discoverable or not in the way of simplification of things or oversimplification of things, where there seems to be no access to Bluetooth device details and no way to add device without pairing code.
The remote is recognized as mouse with keyboard, which makes things worse, there is not only no code on the device, even if there is one (or if it would except 0000, 0000000, or similar), I have no way to enter it.
Unfortunately Maverics made things simple but useless for some bluetooth devices. It's unnecessary.
Seems like I will be stuck with Snow Leopard on one of my machines forever.
When I look in console on SL, here is what I see:
2014-06-28 8:23:11.268 AM System Preferences[7658]: [establishKernelConnection] Received an error from IOServiceOpen() - 0x10000003. NULLing out io_service_t.
There is an entry like this every time I try to pair.
The Bluetooth manager window says -- "Pairing failed"
When I go to Options, it shows the field to enter code. No matter what I enter there or if I leave empty, I won't be able to pair.
Otherwise BT works fine on Maverics, I have Apple keyboard, Logitech kayboard, Apple and Logitech trackpad and audio device connected, no issue.
The Remote presenter works also fine and I tried to re-pair it with other non-Mavericks machines and works fine too.
I upgraded to Lion and now can't print PDF files and Acrobat reader doesn't work anymore.
View 1 Replies View RelatedMy time machine backup isnt working for the last few months. The backup is located on a QNAP TS-670.
I can look for the TM and the iMac see the TM, but if I start the backup, a popup comes up. "The image of the backup-volume "/Volume/TMBackup/Danielas iMac.sparsebundle" cant be accessed. (Error -1)
Maybe it is not the exact error message in english, but I hope you know what I mean. Im working on a german system.
I can access the TM-Share through the finder (share: afp://[...]).
Here is the log I've got from the terminal: Danielas-iMac:~ danielawendling$ tail -f /var/log/system.log |grep backupJun 6 14:43:36 Danielas-iMac.local com.apple.backupd[323]: Failed to eject volume /Volumes/TMBackup (FSVolumeRefNum: -105; status: -47; dissenting pid: 0)
[Code] .....
Info:
iMac, OS X Mountain Lion (10.8.5)
After working fine for a few weeks, the keyboard backlight suddenly doesn't work anymore. When I press F6 (more light) I get the on screen box, but it won't go up beyond 0 and a circle with a line through it is displayed below the indicator/status.
View 3 Replies View RelatedMy keyboard and trackpad doesn´t work. I have a macbook pro 17" from 2008, and i upgraded the OS to Snow Leopard. I even tried with Lion, because i read somewhere that this could solve the problem, but so far, nothing.
Info:
MacBook Pro, Mac OS X (10.5.3), 17"
I've recently installed more ram into my macbook pro, and now the keyboard and trackpad doesn't work. My wireless mouse does work however. I tried taking the new Ram out and turning the computer back on that way, but the keyboard still won't work.
Info:
MacBook Pro
My new mac keyboard usb doesn't work properly on osX 10.6.8 although it says on the box that it works with it.
I follow the instructions of Software update but it does not recognize it when I try at System Preferences > Keyboard.
Info:
iMac, Mac OS X (10.6.8)
(Running 10.4.6 on an eMac btw) As I type this in a Firefox window, I am unable to type ANYTHING in Finder. I created a new folder and tried to rename it - nothing's happening. Typing won't work in Finder Search, or Folder Info either. Nor folders i create on the Desktop. I tried closing Finder and re-opening. No luck. I can type in every other program.
View 4 Replies View RelatedI tried setting a shortcut for "All Applications" -> "Zoom" so that I can have a keyboard shorcut for the green button/maximize button at the top (you can probably tell I just switched over from Windows). I set it to control+Z (^Z) and in FireFox when I look at the Window menu at the top I see "Zoom ^Z" like it should work, but it doesn't. When I click control+Z the Window menu at top sort of flashes/highlights real quick but the zoom function is not called. When I manually go to Window-->Zoom, it works.
View 1 Replies View RelatedI bought a rocketfish bluetooth adapter(usb) and i have a PowerMacG5, and i just got the newest bluetooth wireless keyboard but the fn key wont work at all. i cant change the volume or the use the previous, pause/play keys, or fastforward because the fn key doesn't work.
View 10 Replies View Relatedmy keyboard lights doesn't work!
Info:
MacBook Pro, Mac OS X (10.7.3)
When I am in Mac's "Pages" or messaging in "Mail", the keyboard "END" button doesn't do anything. When I isited the Apple store, theirs didn't seem to work either, except when using Microsoft Word for Mac. Ironic, huh? Does anyone know anything about this??
View 4 Replies View RelatedI used my Wireless Aluminum Keyboard over in Mac OS. I recently installed Vista 32-bit over bootcamp. After I boot Windows, I cannot use my Wireless keyboard. I paired using Windows help assistant or whatever but still cant use it. Do you guys have any same problems? What do you guys do? Is there any Apple Software update for this problem? I checked Apple support page but no luck!
View 1 Replies View RelatedI am running Mac 10.5.6 and I have installed VMware Fusion so that i can try and run Windows XP since i have some useful applications. However, when it boots i cannot get the mouse or keyboard to work which means that i cannot do anything on the virtualisation.
View 2 Replies View RelatedI was installing windows with Bootcamp.so i started the installation process got past partition and now i am stuck on select cd-rom boot type no key board or mouse will work and i cannot eject the windows cd everytime i restart it goes to this screen..I tried a dell keyboard with usb and that didn't work any other suggestions.i feel like if i eject the cd it will help i just want to get back to Lion and all that awesome stuff on my computer.
Info:
iMac, Mac OS X (10.7.4)
The number pad on the new Apple Keyboard (Aluminum) doesn't work in VMWare Fusion w/ Win XP.
View 9 Replies View RelatedI have an iMac G3 keyboard that I'm trying to use with my MacBook, it works PERFECT, except when I press caps lock it just stops working. Also, when I first plug it in the Caps Lock light flashes green for just a split second. Is there any chance of getting hold of some software that would help?
View 5 Replies View RelatedI got my imac in November '09 and my caps lock works but the green led does not light always.
The only way i can fix it is remove the batteries
Or disconnect and reconnect the keyboard by clicking on the bluetooth icon
So if apple is not going to fix this bluetooth bug im going to see if apple will refund my money so i can get a wired one.
My friends keyboard does this also and im fed up with this bs...
When I switch on my MacBookPro OX S Lion it stays on a grey page with the apple logo but that's all ,what do I have to do ?
Info:
MacBook Pro
