I am running Mac 10.5.6 and I have installed VMware Fusion so that i can try and run Windows XP since i have some useful applications. However, when it boots i cannot get the mouse or keyboard to work which means that i cannot do anything on the virtualisation.
View 2 RepliesThe number pad on the new Apple Keyboard (Aluminum) doesn't work in VMWare Fusion w/ Win XP.
View 9 Replies View RelatedIt says that the drive has changed and I have to unmount and then remount it, but i don't really know how to do that and it doesn't seem to work
View 4 Replies View RelatedI was trying to load the software and a message said "only load on a intel processer system". The mac mini I have does have a intel processer, so why will it not load, is there a way around it?
Info:
Mac mini (Mid 2011), Mac OS X (10.7.2)
I'm using Fusion with my Boot Camp partition on my MacBook. I've got an external keyboard (Matias OSX Keyboard). My number pad doesn't work in Windows but does in OS X. I'm not sure if there is a num lock key or how to access it if that would make the difference.
View 4 Replies View RelatedI'll like to install Mac OS 10.4.6 in VMWare Fusion for stuff that I need to use 10.4 in. How might I do that? I've noticed they support 10.5 and 10.6 server but why not client? and why not 10.4 intel?
I have the install disks with me, if I need to make an iso or cdr of it, I know how.
When my laptop stopped recognizing my external keyboard and mouse I searched the discussions and found an answer that has worked, but only temporarily. It was to do a PRAM reset 3 times and when I do this the keyboard and mouse work fine. But when I disconnect the mouse and keyboard and then later reconnect it will not recognize them. I have repeated the PRAM reset 3 times each time this has happened (4 times) and they work fine but then there is always a problem when I disconnect and reconnect.Â
Info:
MacBook, Mac OS X (10.5.8)
My Mac mini 2010 model with 60SSD 4GB ram, vmware fusion windows 7 ent. Very choppy and bad performance,
View 2 Replies View RelatedHello, everybody. I just discovered this forum, having finally taken the plunge and bought a Mac Pro to replace an aging Dell PC. (My wife has had a MacBook Pro since early last year, which is what convinced me to switch.)
My main use for the new machine will be photo processing, including astrophotography. I will obviously be able to use Photoshop natively, but will have to use Windows for one or two astro packages (and also for occasional use of an old Windows version of Mathematica).
So, my questions:
Am I right to think that it is possible to install Windows with Boot Camp and then also use the same Windows install under Fusion? If so, is there anything special that needs to be done when first doing the Boot Camp install?
Anybody using VMWare Fusion with non-Windows guest OS? Just wondering if you are getting core shutdowns when the guest OS is running.
View 3 Replies View RelatedI did a search on these forums, but came up with nothing. I have two virtual machines set up with VMWare Fusion, one is my Boot Camp partition for Windows XP Professional, the other is Mandriva Linux. In both of these virtual machines, the internet doesn't work. I tried changing the network settings for VMWare Fusion to both NAT and bridged, and neither of them work. It's a little annoying because there's not too much you can do without an internet connection.
View 16 Replies View RelatedDoes anyone know how to get Snow Leopard to work in VMware Fusion? When I go to make a new Virtual Machine I can't select the .dmg. I even tried to convert the .dmg to .img but that didnt make any difference.
View 14 Replies View RelatedIs it possible to use both Boot Camp and VMware Fusion to access a particular virtual Windows PC? And if so, which should I set up first?
View 13 Replies View RelatedI have VMware Fusion 2 and I want to transfer some mp3 files from my virtual machine, Windows XP to my Mac OS X.
I can't find any instruction regarding this in anywhere.
I have the Windows 7 RC .iso (it's 64bit, I should have that one, right? Macs are 64 bit not 32 bit?) file and I want to install it through my VMware fusion app. Please note, this is NOT the beta for Windows 7, it's the newer RC.
How in the world do I do this? Some online guides say to set it as Windows Server 2008 x64, others say Windows Vista 64.
Could someone take me through the process of installing it? Or link me to a video or proven article? Setup goes through usually but the next time I boot into Windows 7 it tells me there was an installation error and Windows could not find the startup disk.
Model Name:MacBook Pr Processor Name:Intel Core 2 Duo Processor Speed:2.4 GHz Number Of Processors:1 Total Number Of Cores:2 L2 Cache:4 MB
View 1 Replies View RelatedI have a DVD for my physics class that only can be opened in Windows for whatever reason (I also have a game I want to use). OS X recognizes it, but when I boot into Windows 7 (RTM Build 7600) in VMware Fusion, I see no sign of it.
How do I open it?
Running Fusion on my 2+ year old MBP has become a near hopeless frustration. When I first got the machine, it ran pretty well, but it hasn't for quite awhile now. It tends to be sluggish to the point of uselessness. Currently, I'm doing a trial of Fusion 3. I'm a licensed owner of the prior versions.
I don't need it much, but when I do, I really need it. I gave up on using it with Windows 7, which is fine, XP will do. Once in awhile, I'll run it and all will be well. Other times, most of the time, it's unusable. I see no pattern to what makes it run well or not. Earlier today, I rebooted and started Fusion all by itself and didn't run anything else. Didn't help much.
Anyone had these problems and found a solution? I see lots of people with problems and plenty of others without. But not many who've bridged the gap.
Okay, so my friend lent me VMWare Fusion 2. And it works perfectly. But my mother, is concerned that it may receive Viruses. Is it likely that it will recieve viruses? I have a firewall and AVG Free Virus Protector on it.
View 7 Replies View RelatedSince there are two operating systems running at a time, wouldnt that mean that it would only use half the ram per OS and slow both of them down alot?
View 7 Replies View RelatedI am a new Mac user. I bought a used Mac with VMware Fusion installed so I could use QuickBooks. I no longer need to use QB. The Fusion is taking up too much of my hard drive. Would like to uninstall it.
Info:MacBook, Mac OS X (10.6.8)
Yesterday I updates Lion to 10.7.4.Â
Today I went to run WinXP under VMWare Fusion 3 and got the following errors: "Unable to retrieve kernel zone size" "Failed to initialize monitor device." "Cannot find a valid peer process to connect to" It won't start. 1. Can I roll back 10.7.4 to 10.7.3? 3. Can I re-install 10.7.0 on an external disk or partition and run from that? Then I could recover some files from WinXP. (Last backup of WinXP is a couple weeks old). Other?
I just reinstalled SL, and I cannot get spaces to work with mouse buttons. The mouse does work, and spaces works with keyboard keys. I really want it on my mouse though (mouse button #5).
it is NOT an apple mighty, it's a microsoft X5 gaming mouse.
I just got a Magic Mouse. It works perfectly in OS X, but when I boot into Windows XP, it doesn't work at all. I read that the Bluetooth Update 1.0 is for the new iMacs only. But I read that others got the mouse working, just without the scrolling.
View 9 Replies View RelatedI am going to the University of Georgia next year. I am buying a Mac, but I will need to run Windows for a test program called sofTest. According to UGA, sofTest does not work with VMware Fusion or Parallels, only Boot Camp. If I create a Boot Camp partition and install Fusion on that partition, can I still use Boot Camp when I need to?
View 4 Replies View RelatedI have Windows 7 installed in VMWare fusion. Is there a way to directly boot from that installation into non-virtualized W7? Would bootcamp or something be able to read and boot from that installation?
I want to boot directly into W7 for gaming. The virtualized performance isn't really cutting it.
Had been running my boot-camp Windows XP on my MBA using VMWare Fusion. A new version just got released, and I quickly upgraded.
After the upgrade, VM boot up takes for ever. Even after that, the performance is too poor. I tried uninstalling and re-installing VMWare tools, but the install doesn't complete.
[]URL watch?v=j-GQQ5a5Tbg Not much of a big deal at all, but I'm wondering if it's only me.
View 6 Replies View RelatedI installed Vista Home Premium on a bootcamp partition. When I load it up in vmware, the graphics really take a fall. Is this normal? I have to use the vista basic theme since it won't let me run aero!
View 4 Replies View RelatedJust did a fresh install of Windows 7 RC onto my Boot Camp partition. Using VMWare's Fusion (v2.0.4) to load Windows 7 up on my Mac. However, it blue screens as soon as the Windows 7 logo appears during boot.
I have it set up to emulate "Windows 2008 Server x64" as detailed in VMWare's post to get Windows 7 working.
What's going on..? Any ideas how I can sort this out?
