MacBook Pro :: Its Reading An Internal CPU Temp Of 84 C Within Twenty Minutes?
Feb 15, 2012My new 13inch MacPro, and with only Safari open, it is reading an internal CPU temp of 84 C within twenty minutes. Thoughts?
Info:
MacBook Pro
My new 13inch MacPro, and with only Safari open, it is reading an internal CPU temp of 84 C within twenty minutes. Thoughts?
Info:
MacBook Pro
My Imac is less than a year old and in the past month it has been taking at least twenty minutes on the pale blue screen before you get to log my password and the computer to start.
Info:
iMac (21.5-inch Mid 2010), Mac OS X (10.6.8)
I was considering picking up this stand for my uMBP:
One thing that concerned me was having higher CPU temps with the lid closed.
I read a thread a few days ago that said there is no CPU temp change between lid closed and lid opened. And after doing some of my own testing I now believe that information is FALSE.
I use smcFanControl to control fan speed and monitor CPU temp.
Before using smcFantControl to boost my fan speed to constantly run at 3,400RPM, my CPU temp was 10-20 degrees (celsius) higher, on average.
I have a late 2009 MacBook pro, running the latest version of Lion. Last week, I experienced a Kernel panic at start up, and was unable to launch the OS, even with the recovery boot. Starting in verbose told me that there was a sata issue. I opened the computer, replaced the internal hard drive with lion set upon it, and tried to start again, without any success. I bought a SATA-USB cable to plug my old hard drive. My computer is now running normally, but with the former internal hard drive plugged in USB.
Disk manager sees the new one and I can read data written upon it, but I can't write anything nor erase or partition it. So both the hard drives are OK (I tested them in a friend's MacBook pro and it worked), the computer seems OK too, because I'm running it presently, but any internal hard drive won't work. The cable that links the hard drive to the motherboard does not seem to be damaged, however, the status indicator light is not working since that time.
Info:
MacBook Pro, Mac OS X (10.7.3)
I downloaded a program to monitor my late 2008 unibody Macbook Pro's temperatures. Just a few minutes ago while playing music/playing an ONLINE game real briefly it warned me that my CPU temperature was too high. (167˚ F) Is that too high of a temperature? What should the "range" be?
View 4 Replies View RelatedI have a MacBookPro5,4 2.53GHz with one fan and only the 9400M. After updating to 10.6.3 the operating temperature seems to have risen from about 43 degrees C to about 48. It has been getting warmer here in Japan so the ambient temperature is different but I still think this rise in temp. is due to the update. I have smcfancontrol installed and set to 2500rpm instead of the normal 2000, but it seems to be not enough to keep the temp. under control, as it did before the update. Any relatively hard use of the cpu and the temp goes up to 60 degrees.
View 2 Replies View RelatedI have a dead/dying old G4 iBook (logic board failure) and was wondering whether I can remove the internal drive and mount it in an external case, and use it as an external USB or Firewire drive? The drive has some valuable data on it which I'd like to keep, and the iBook only boots for a few minutes each time (if I'm lucky).Is it just a matter of opening it up, taking the drive out, and taking it along to a computer shop who should be able to kit me out?
View 3 Replies View RelatedI was just adding some Quicklook plugins when my temps started to soar. I have restarted, repaired permissions, removed said plugins, and tried other accounts. Nothing is lowering the temps. Weird thing is is Activity Monitor is showing NOTHING using the processor nearly enough to jump my temps to 85 C with nothing running.
I'm "controlling" the issue for now by ramping my fans to full speed. Even with this I am hovering around 70 C...a good 10-15 C above what I am normally at (and was at 30 minutes ago).
*Note: Normally running fans at 6000rpm would give me temps in the mid to low 40 C range
I recently purchased a new SSD and would like to input that into my MBP 2012. If I have a partition on my external HDD that contains the carbon copy of my MBP, am I able to clone it into my SSD after I have installed it in the MBP through the USB?
Internal HDD --> External HDD
Place internal HDD into optibay, and place SSD into the harddisk slot
Connect External HDD via USB to MBP
CarbonCopy to new SSD via USB from External HDD
Format Internal HDD
Will this work?
I just started using the aluminum MBP 15" and used to have 13 Macbook aluminum. and as far as i can tell the 13" did not get as hot as my 15" I just installed a fan and temp controller and even with running the fan higher then default os 10.6 temps reached 165 F I freaked out and cranked up the fan to 5000 RPM and temps dropped so far. So, How hot are these MBP supposed to get until it no longer safe?? And its not even close to being where the MBP is: sitting in my office on a desk where its cold and i have to drink tea to stay warm.
View 15 Replies View Relatedim running at cpu temp of 82C with my fan running around 2000 rpm with the mbp in my sig. Is this a normal temp to fan rpm ratio? Why is bothers me is that im use to my Mb flaring up its fans every time it got hot.
View 16 Replies View Relatedusing Ichat the other day running a full screen chat, and I saw the temp of the CPU rise to about 65C and the fans started spinning up 6200.... That was understandable as the CPU was under load... but after I closed the ichat down, the CPU temp dropped down to about 50C but the fans stayed at 6200 for a long period of time. probably about 10 minutes or so... then they slowly crepted down to 2500.
View 15 Replies View RelatedWhat is your heat sink temp when the cpu is running hot, like 90+ degree C?
I recently performed the excess thermal compound removal procedure. Now I am worried that my cpu and heat sink are not in 100% contact, due to the very small amount of paste applied.
My heat sink sits at around 50C under normal load (cpu temp ~ 60). But at high load, cpu up at 90+ C, my heat sink is still at around 50-60C. Is this normal?
What is the best way to completely erase everything on the computer so that it is not in the RAM or temporary memory anymore? I was looking at bikini models and I was redirected to another porn site. It popped up a bunch of other sites too. I would like to get rid of this and start over with this computer.
View 6 Replies View RelatedHow Come When I Start Using iTunes the temp of my CPU goes from 45C to 71C This only happens when I run iTunes
I use SMC Fan Control its at 3500 RPM when I'm off the charger and when I'm on, 4500 RPM
And what is the average temperatures for a macbook pro (in celsius)
I just installed iStat. It is an AWESOME app! Where have I been? Are there any other must have apps?
To my main question ... I've noticed my temp ranges from 130's (F) to 150's (youtube). Is this normal?
Does the macbook run cooler with an SSD instead of a traditional hdd? My 13" is running quite hot so I'm looking at ways to reduce the heat.
View 4 Replies View RelatedWhenever I run a flash video, according to my istats program, the CPU temp is between 65c to 67c. Is this normal? I never noticed this high temp on my previous 2.4 umbp. There are other sites that have flash video that makes it go up to 80-85c.
View 1 Replies View RelatedWhen i play games, cpu temp runs about 80C , do you think this is not safe for mbp ?What temps must it be running ?Does it have protection against having high temp and shutting it down ?
View 3 Replies View RelatedI don't see anyone else mentioning temps this high. My specs are below. I followed the directions in a post here in the forums and his directions did work, and I used the modified latest drivers from laptoptogo (258.96), and I was able to overclock the gpu on the windows side. I'm using Vista 32-bit (I know, but that's the only Windows OS I have). I didn't even OC it much, just 550 on the core and 1200 memory, and all was well. The framerate noticeably improved and I was able to play SC2 on mostly high settings (including shaders) with FPS ~ mid 30s and lowest mid 20s. I was a happy camper until I checked my temp via the Nvidia monitor, and noticed it went up to 92C at one point! At first, I thought this was because I was playing on 1080p on my HDTV, but I played again and it went to 88C on native screen.
A couple notes: I did not modify fan speed (allowing the native algorithm to run). I have a Core i5 15-inch MBP, 2.4GHz, high-res matte screen, 320 GB HDD, Vista 32-bit under bootcamp. Playing in native res. How come my temps are running so high? I know YMMV but I haven't even OC'ed it half of what people on this forum are doing successfully with stable temps in the 70s. Also, could it possibly be the fact that I'm using the latest drivers and maybe I need to use the older driver people are mentioning on this site? Is it possible I need to monitor my temps with another program other than the Nvidia one?
My Macbook Air 2012 is showing CPU temps of over 100 degrees celcius when encoding video/playing games. This seems like it's WAY too hot.. is it normal?
Info:
MacBook Air (13-inch, Mid 2012), i5, 8GB RAM, 128GB SSD, LION
I run 2 instances of yes > /dev/null in the terminal windows and the coolbook temperature rises to 100 degrees Celsius. In istat pro its 105 degrees Celsius for the cpu? And of course its downclocking to 1200mhz. If I use the lowest voltage in coolbook the temperature will reach 92 degrees celcius, still really high. I'm only stressing the CPU, wonder what happens when I also stress the GPU. It seems the air is really not capable of this 'high-end' processor and gpu, I wonder if the rev2 of the air will be any better.
View 2 Replies View RelatedIt is there on my older MacBook, but not my new MBP.Just wondering if anyone knows why?
View 3 Replies View RelatedWhats the normal temperature suppose to be for the CPU? Mine is at 72 Degree's Cel. I tried using smc fan control on my new MBP and set the fan speeds higher and it didnt seem to work so I used fan Control which Worked my Cpu's temp is 72 Degee with fans spinning at 5000 rpm is this normal?
View 10 Replies View RelatedI have a fan utility that lists 2 fans. The "Left" fan is at 6204 rpm's, temp 81.4C The "Right" fan shows 0rpm's, temp -1C. Is this merely because the sensor is capable of recording two fan speeds or do I really have one malfunctioning fan? (which would explain the high cpu temp, if it applies).
A third sensor, a widget, records the same temp, with Heatsink A 70C and Heatsink B 64C. I realize all three sensors are getting their readings from the same spot; which one do I rely on?
screenshot taken while converting movie to ipod/iphone format*
View 20 Replies View RelatedI've notices a really strange behaviour with my 13" MBP. The fan simply doesn't go faster on high loads, which results in a CPU temperature that is far beyond the operation specification Intel provides.
Seems as if the SMC controller is kind of broken. I tried to reset it, but that didn't change anything. A PRAM reset also didn't work.
I had my computer idling and noticed that the fans sped up to full blast, so naturally I tried to figure out what was causing it to heat up. I quit pretty much every app I had running, no diff. I unplugged my iPhone, no diff. Even shutdown the computer, fans went right back up as soon as I loaded up OS X. So I looked at SMC Fancontrol (which I never really even use) and the temp was at 88 C!!
I have nothing open, completely turned off the computer and rebooted it to make sure that nothing running would be causing it, and it's STILL running hot as hell! Is there anything I can do to see what's causing it to run so damn hot? I really don't wanna put a crap-load of wear on my fans and CPU here.
I'm using a 2.2 ghz SantaRosa MBP running the latest version of Snow Leopard.
My question is this, is it normal for core temps to sit as high as 90 - 100�C while doing things like rendering video and gaming. For example, I was playing the Sims 3 for the first time the other day, and the core temps sat at about 95�C while playing. Is this a normal temperature? or is it something I need to be worried about.
I've already downloaded SMCfancontroller and use it whenever I'm doing something like encoding a DVD. I'm just overly concerned that I might cause some damage if I let it get around 100�C too often.
Could someone recommend a good, lightweight, free app that shows CPU temperatures and fan speed?
View 6 Replies View Related