MacBook Pro :: Head Phone Port Does Not Seem To Be Working?
May 5, 2012
I have been able to plug in small speakers and headphones in the past into the port on the left of my laptop. I just tried to plug in to my new receiver for the first time in months and, nothing... So I have tried my headphones and mini speakers - still nothing. I'm pretty certain it's the port. Or could it be software thing? Please help, I finally got my projector working and now I have wimpy sound!
P.S. I recently updated to Lion, in case that is significant.
Info:
MacBook Pro (15-inch Early 2008), iOS 5.0.1
View 3 Replies
ADVERTISEMENT
Dec 21, 2010
i cannot able to voice chat when i attach head phone
View 5 Replies
View Related
Sep 2, 2014
Macbook pro does not power up after plugging in phone into USB Port
Info:
MacBook Pro
View 1 Replies
View Related
Nov 22, 2009
I am having issues with my Dual Band 1TB time capsule for some reason the damn ports won't forward I have enabled the correct settings with the ip address and the ports, but when I use a program to test if the ports are open they are always closed, regardless on pc or mac. Does anyone have a solution to this? I even reset my Time capsule to see if it would work, but no luck.
View 1 Replies
View Related
Dec 7, 2014
Yosemite software updated and Ios and icloud ID are all checked. I can receive calls but unable to make.
Info:
MacBook Air, OS X Yosemite (10.10.1)
View 1 Replies
View Related
Nov 12, 2009
i have a new MBP and for some weird reason the last few days the dead phone jack stopped working when i plug it in it almost sounds like a really snatched cd. When reboot it works again. Its happened a few times now wondering if anyone has run into this problem? its starting happening to the speaker as well a jumping in the sound. Can't make anything out. the only thing i can think of that i've done differently is i repaired the permissions and ran a weekly clean up with the program MainMenu.
View 2 Replies
View Related
Jan 20, 2009
Has anyone tried this with the Dual Head DVI? I'm assuming that it would go MiniDisplayPort to VGA, then Matrox, and out. Does it work, and is there any lag?
View 2 Replies
View Related
Aug 31, 2014
I have my mail accounts in both my Macbook and iPad. If I have opened the mail in my computer I DON`T want my iPad to pick them up too.
But if I first pick them up in the iPad, I still want the computer to pick them up.
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.4)
View 7 Replies
View Related
May 19, 2012
I have a MacBook Pro 13' using Mac OSX 10.7.4. brand new bought two months ago. Everything went fine until I noticed that USB port left side is not longer working. I've been trying plu a usb memory and wireless mouse and nothing happen. I have tried reset SMC but I am not sure if I am doing well such process or nothing happens before that.
Info:
MacBook Pro, Mac OS X (10.7.4)
View 2 Replies
View Related
Aug 5, 2009
I have a new 2.13/SSD Air which has been awesome with no lines and fast enough for me to do all my work. Since this is my first Mac (coming from the PC world), I am still getting used to how OS X works. I really like the way OS X installs apps - so simple and transparent compared to Windows. One thing that has been bugging me is whenever I do something like install apps, eject disks or dismount apps, there is "uncoiling spring" like sound coming from the machine. The sound reminds of a hard drive disk head parking when the disk stops spinning. Since I have the SSD, I expect things to be completely silent all the time. Is this an OSX sound or do I have a bad SSD?
View 10 Replies
View Related
Nov 8, 2010
My first usb port (the lead usb port) is stopped working. I accidentally put a usb hub with 12v power supply in it, into my MBP. It is a 15" MacBook Pro mid 2010 2,53ghz i5. (it's the one with a ssd slot). I have tried to run a hardware test on it but it didn't came with any result.
View 9 Replies
View Related
Mar 26, 2012
My ethernet port is not working when cable is plugged in. Wireless works fine. Ethernet was working up until end of Feb. Then I turned it on and it wouldn't connect. Plugged into a friend's house still not working. Tried at work, still no luck. (I'm on a MacBook Pro late 2008)
Info:
MacBook Pro (15-inch Late 2008), Mac OS X (10.6.8)
View 4 Replies
View Related
Jul 2, 2012
i bought a macbook pro, OS X lion, version 10.7.4 a month ago. one of my USB port suddenly stopped working. i am a new mac user, so i have very less idea about mac.
Info:
Mac Pro, Mac OS X (10.7.4)
View 2 Replies
View Related
Jun 25, 2014
I often watch movies streaming on the internet by connecting my Macbook to my television via my Mini DVI to S-video adaptor cable.Last week, however, it suddenly stopped working. The television can still detect the display, but the image is super distorted and moving in a static-ey way. I can only vaguely make out the icons on my desktop on the TV screen.I thought that perhaps my adaptor cable was at fault, so I bought a new one - but the problem remains. I have also tried resetting the PRAM, repairing the disc and permissions with Disc Utility, and cleaning the Mini DVI port. I am pretty certain that it is a hardware problem with the port itself. One of the pins on my Mini DVI port looks like it could be out of place. It is kind of squished at the bottom of the port instead of laying flat like the others.
View 1 Replies
View Related
Dec 21, 2008
I have a 2 Gen MBA and today suddenly the keyboard, trackpad and even the USB port stopped working, I tried connect an external mouse but it didn't work, even other USB devices are not working !! I tried the display port it is fine, but I am not sure about the audio port. I tried the SMC reset but it did me no good.
I had bought the MBA from Apple UK but currently I am in INDIA for my winter break from UNI. I don't have my OSX discs at the moment they are back in UK, I tried calling the Applecare but they are closed being a Sunday, and I don't want the local Apple Authorised Service center to touch my air as I don't trust them (The appointment of these repair centers in INDIA is not upto the highest standards !)
The keyboard and the trackpad are working in the Apple hardware test, I was able to move around the cursor and even use the keyboard to select the various options, so I believe the hardware is fine.
So any suggestions what can I do in the meantime, I will call Apple Care in UK tomorrow. I am not back in the UK till the 26th January.
View 10 Replies
View Related
Jun 17, 2009
My 2.4 Aluminum MacBook has a very serious problem, but only with the line-in port. The headphones work fine through the line out. When I plug the microphone, the built-in mic still works,]. I tried everything, it just doesn't work at all, i plugged in the microphone and changed the system preferences manually and did everything with all the applications, but still, nothing is working. I have had this MacBook for 2 weeks now. I wish I waited couple of days for the pro.
View 3 Replies
View Related
Aug 19, 2009
When I plug a set of headphones on my macbook pro, it no longer recognizes that headphones are plugged in. I have tried three different sets of headphones just to make sure that they are not the problem. In Sound/Output section of system preferences, it still says internal speakers even when the headphones are plugged in all the way.
Is there a fix for this I can do myself or do I need to take it in to an Apple Store?
View 1 Replies
View Related
Feb 6, 2010
I accidentally dropped my MBP and since then, my left USB port doesn't appear to work anymore. Its weird because when I plug my seagate external hard drive in, the lights of the hd come on but my MBP doesn't recognize it, likewise with my iPod, where the battery appears to be charging, but iTunes doesn't recognise my iPod.
View 3 Replies
View Related
Feb 27, 2010
I hooked my Macbook mini-display port up to my new Sony 32" TV and it worked fine for a month or so, but then it stopped working. Now when I plug it in the TV says there is "no signal" and the laptop doesn't detect the display. Nothing happens when I plug it in. I have tried two different HDMI chords, but only one mini display chord.
View 1 Replies
View Related
Feb 27, 2010
The Firewire port on my MacBook has stopped working. Nothing responds and when you look in System Profiler with anything connected the Firewire section shows the spinning indicator for a few minutes before claiming it is unable to list devices. I have also tried all the usual troubleshooting steps including resetting the SMC. But, if I put my thumb under the connected Firewire plug and gently press upwards the port works. It shows in System Profiler and drives mount. I have, of course, tried with different cables to rule that out too.
It clearly seems to be a physical problem with the port somehow. Does anyone have any ideas of exactly what the problem might be, and how easy it is to fix? Maybe a pin just needs bending outwards, or the port loose and can a clip needs pushing back in. If it is likely to be something relatively simple I am comfortable with fixing it myself, but the laptop is a few years old and not covered by AppleCare so I am wearing of an expensive repair bill.
View 5 Replies
View Related
Aug 8, 2010
I have a year old 17" MBP. I use it with a 24" Dell and have had no problems. Occasionally I hook it up to my HDTV with a long HDMI cable and a DVI to HDMI adapter. Tonight I wanted to watch something so I unplugged the Dell and plugged in the TV, but nothing happened. I noticed on my MBP everything was on the one screen as if dual display was not working. I unplugged the mini display port, screen goes blue for a sec, and the same screen comes back up. Plug it back in, screen goes blue for a sec, and the same screen comes up. Repeat, same results. The Dell when unplugged says "no dvi signal" but plugged in is black. Restarted 3 times, repaired permissions.... nothing.
View 6 Replies
View Related
Sep 1, 2014
I have an older macbook 3,1 running Mavericks OS and recently one of my left USB ports has not been:
1) able to eject external hard drives plugged into it (I have to force eject)-instead it gives me a message that one or more programs may be using it (even though I don't have any programs using it). The hard drive is being powered by USB has a 3.0 connection although this wasn't a problem in the past... I tried the other USB port and it can eject just fine from that port.
2)Intermittent communication with mouse. Not sure if this is a hardware issue but when I try to run diagnostics on this laptop by holding down the "D" key at startup it doesn't take me to diagnostics. I no longer have the discs for this laptop (containing said hardware test) so I can't boot the diagnostics from that discs.
In lieu of a hardware test I opened CONSOLE and did a search for USB and there were a couple of these messages:
8/29/14 12:13:43.000 AM kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0xdc00 ****
Is this a logic board issue? Would rolling my OS back to pre-Mavericks work? The problem didn't emerge right when I updated to Mavericks however I have had luck changing OS stuff (updating or rolling back) with faulty USBs...
Here are other troubleshooting methods I have attempted with no success: -Disk Utlity (repair disk and permissions)
-RESET PRAM NVRAM
-Remove battery
-RESET SMC
-Shut Down
-Run Disk Utility @ startup
I'd like to get access to a Hardware Test compatible with my macbook. The links I have found online are to incomplete files.
Info:
MacBook Pro, OS X Mavericks (10.9.4)
View 1 Replies
View Related
Jun 25, 2014
I often watch movies streaming on the internet by connecting my Macbook to my television via my Mini DVI to S-video adaptor cable. Last week, however, it suddenly stopped working. The television can still detect the display, but the image is super distorted and moving in a static-ey way. I can only vaguely make out the icons on my desktop on the TV screen. I thought that perhaps my adaptor cable was at fault, so I bought a new one - but the problem remains. I have also tried resetting the PRAM, repairing the disc and permissions with Disc Utility, and cleaning the Mini DVI port. I am pretty certain that it is a hardware problem with the port itself. One of the pins on my Mini DVI port looks like it could be out of place. It is kind of squished at the bottom of the port instead of laying flat like the others. I’m thinking that this might be the culprit. Is there a way to repair the port without having to replace the whole logic board? The Macbook in question is a 2008 Core 2 Duo running Lion.
View 1 Replies
View Related
Dec 20, 2009
I just installed it in my late 2008 uMBP. It's SUPER fast! Best upgrade ever.
Does anyone know if this drive has head parking (or whatever they call it)? Should I disable the SMS in the MBP?
View 12 Replies
View Related
Jun 3, 2014
HDMI port on Macbook pro suddenly stopped working. Is it expensive to fix?
View 2 Replies
View Related
Sep 4, 2010
I just got to college and discovered that wifi didnt work (now I've learned that it only works with Firefox for whatever reason) so I just plugged into the ethernet port at my desk and it worked for a week or so and then it wouldn't work and I checked Network settings and it couldn't detect an ethernet cable. So I reset the PRAM and it worked... for a few hours, and now it doesn't. I don't want to have to do that every time I come back to my desk. What should I do about this? (and any suggestions on safari/chrome not working? I posted it in another subforum on here but I got nowhere)
View 2 Replies
View Related
Apr 11, 2012
I seem to have a problem with my ethernet port not working after a specific location change...I have three locations I used frequently. Let's call them:
1) HomeWireless
2) WorkWireless (used when I'm in meetings)
3) WorkEthernet (used when I'm at my desk)
My general practice is to change locations just before putting my MacBook Pro to sleep, and then it is happily ready for the desired network when it is awoken.I'm not sure what this change in behavior coincided with, but as of ~1 month ago, I am finding that going from WorkWireless to WorkEthernet, my ethernet port appears to be completely dead and I have to reboot the computer to reactivate it (yes, I've checked the cable itself and the wall port at they're OK). I've tried a couple ways of disabling & re-enabling it in software, but I don't get the impression anything actually resets this interface - suggestions are welcome as perhaps I just didn't try the right thing. I couldn't find anything quite the same as "networksetup -setairportpower" for the ethernet port.Oddly, this is not an issue with going from HomeWireless to WorkEthernet. Both HomeWirelss and WorkWireless have the ethernet interface deactivated in the Network pref pane, and perhaps the only notable difference between HomeWirelss and WorkWireless is that I use a static IP on the former and dynamic on the latter.
Info:
MacBook
Pro, Mac OS X (10.6.8)
View 1 Replies
View Related
Aug 26, 2014
yesterday i bought MIDI keyboards it's M-AUDIO Keystation Mini 32
The problem is that when i connect it to right USB port it works flawlessly, but when i connect it to my left USB port - my macbook pro recognizes the device but it doesn't send any midi data - to put it in other way: it is not working.
I have checked, everything is working fine In the LEFT usb port( wireless mouse, external HDD, Flash drives, Iphone) except my MIDI Keyboard.
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.4)
View 1 Replies
View Related
Sep 2, 2010
I just got the mini display to hdmi cable for my macbook pro. So far it works with the tv. It displays everything but there is one probably safari doest work.
Airport shows that I am connected but safari doesnt connect.
View 1 Replies
View Related
Jun 2, 2010
I finally upgraded from my 15" PowerBook 1.67 to the new 13" MacBook Pro 2.66. On the PowerBook I would usually run an external display using a single link DVI cable. I have read about the issues with the apple mini display adapters not working on DVI-I or non fully digital displays, but since I had been running the external via single link DVI (digital correct?) I figured that I wouldn't run into any problems. I did some troubleshooting with what I had and plugged my computer into my TV through the mini display adapter to a single link DVI to HDMI cable and all worked fine. Do you think that a dual link DVI cable could solve the problem connecting to my monitor? Or is my monitor flat out incabable? Third party adapter? Worst case I could just go VGA, though I don't want to. My monitor is a Sceptre x20.
View 2 Replies
View Related
