The Firewire port on my MacBook has stopped working. Nothing responds and when you look in System Profiler with anything connected the Firewire section shows the spinning indicator for a few minutes before claiming it is unable to list devices. I have also tried all the usual troubleshooting steps including resetting the SMC. But, if I put my thumb under the connected Firewire plug and gently press upwards the port works. It shows in System Profiler and drives mount. I have, of course, tried with different cables to rule that out too.
It clearly seems to be a physical problem with the port somehow. Does anyone have any ideas of exactly what the problem might be, and how easy it is to fix? Maybe a pin just needs bending outwards, or the port loose and can a clip needs pushing back in. If it is likely to be something relatively simple I am comfortable with fixing it myself, but the laptop is a few years old and not covered by AppleCare so I am wearing of an expensive repair bill.
i bought a macbook pro, OS X lion, version 10.7.4 a month ago. one of my USB port suddenly stopped working. i am a new mac user, so i have very less idea about mac.
When I plug a set of headphones on my macbook pro, it no longer recognizes that headphones are plugged in. I have tried three different sets of headphones just to make sure that they are not the problem. In Sound/Output section of system preferences, it still says internal speakers even when the headphones are plugged in all the way.
Is there a fix for this I can do myself or do I need to take it in to an Apple Store?
I hooked my Macbook mini-display port up to my new Sony 32" TV and it worked fine for a month or so, but then it stopped working. Now when I plug it in the TV says there is "no signal" and the laptop doesn't detect the display. Nothing happens when I plug it in. I have tried two different HDMI chords, but only one mini display chord.
I often watch movies streaming on the internet by connecting my Macbook to my television via my Mini DVI to S-video adaptor cable. Last week, however, it suddenly stopped working. The television can still detect the display, but the image is super distorted and moving in a static-ey way. I can only vaguely make out the icons on my desktop on the TV screen. I thought that perhaps my adaptor cable was at fault, so I bought a new one - but the problem remains. I have also tried resetting the PRAM, repairing the disc and permissions with Disc Utility, and cleaning the Mini DVI port. I am pretty certain that it is a hardware problem with the port itself. One of the pins on my Mini DVI port looks like it could be out of place. It is kind of squished at the bottom of the port instead of laying flat like the others. I’m thinking that this might be the culprit. Is there a way to repair the port without having to replace the whole logic board? The Macbook in question is a 2008 Core 2 Duo running Lion.
i got an aluminium imac. however, today when i tried to connect my FW800 Hard drive it did not work and it works by FW400. i connect the same Drive to my MBP using FW800 and it is working flawlessly.
i am still running tiger while the MBP has leopard
i wonder wether the returned My Book Studio has any effects on this. i returened it because i couldnt get it to connect via firewire. i really hate this as i use that lovely FW800 port a lot.
It WAS working. I'd bought an iomega fw drive with usb and fw800 ports. I hooked up the drive and it worked and then suddenly I got the message that a drive had been ejected improperly. The fw800 port never worked again -- with any drive or any cable. My apple care has run out. (I've tried these cables and drives on another computer.
I have had my 24" 2.8GHz iMac from November 2007 flawless until today, 1 of 3 usb ports on the back simply decided to stop working. my keyboard, when plugged in, does not work, however, I usually use this one port with my iPod, when I plug my iPod in, it turns on, says its connected, then ejects automatically, though in the other ports...it works fine in the other ports.
The firewire port on the front of my machine is bad. I can't transfer any kind of data using it. The port on the back as well as all USB ports work fine. Would this need a complete motherboard replacement? Would it even be worth doing? Could I build a dual processing machine or buy one cheaper?
I understand this particular issue has been discussed at length on this forum and in other places but none of the solutions have yielded any success for me and I see this is often the case for others. So, I'm posting the question again in hopes that there is an Apple guru out there who has figured this one out. (All relevant specs below.)
Problem: Firewire port was working fine for downloading video from a Panasonic PV-GS320 into iMovie 8.0 on an iMac 10.5.8. Then, suddenly the firewire port was no longer recognized: FireWire Bus: Warning:Unable to list FireWire devices. Maximum Speed: Up to 800 Mb/sec The problem cannot be with the camera or cable as I can swap them over to an iBook 10.4 and the camera and firewire download perfectly there. I have run AHT. Test results show no hardware problems. I've tried all of these
I have a 2006 Mac Pro and recently my firewire ports stopped working (front and back). I did a little searching around found a suggestion to try resetting the Mac's PRAM and NVRAM by holding the Cmd-Option-P-R keys down while booting. I have tried this numerous times and it doesn't seem to do anything (i.e. the Mac just loads OS X and doesn't re-boot like the instructions say). I'm using a MS Wireless Comfort Keyboard for Mac. Can you reset using a wireless keyboard?
Since I wasn't making any progress with that, I was toying with bringing in the Mac to a genius bar. Never having used the genius bar before - how does it work? Do I bring the computer in and leave it with them? Do they work on it while I'm there? I don't have an extended warranty so do they charge time and materials? I'm wondering if that might get awfully expensive and if I ought to just buy a PCI-X firewire card instead.
I have a 2006 Mac Pro and recently my firewire ports stopped working (front and back). I did a little searching around found a suggestion to try resetting the Mac's PRAM and NVRAM by holding the Cmd-Option-P-R keys down while booting. I have tried this numerous times and it doesn't seem to do anything (i.e. the Mac just loads OS X and doesn't re-boot like the instructions say). I'm using a MS Wireless Comfort Keyboard for Mac. Can you reset using a wireless keyboard?
Since I wasn't making any progress with that, I was toying with bringing in the Mac to a genius bar. Never having used the genius bar before - how does it work? Do I bring the computer in and leave it with them? Do they work on it while I'm there? I don't have an extended warranty so do they charge time and materials? I'm wondering if that might get awfully expensive and if I ought to just buy a PCI-X firewire card instead.
I've been having an annoying problem lately. The ethernet port on my Mac Mini seems to have stopped working. It happened when I was switching routers. Most likely I just unplugged it from the old router, and into the new one. After that, no more connection, nothing changes when I plug something in.
As far as troubleshooting goes, I've plugged it into other ports, and into my MacBook Air (Just to get a Self assigned IP) and nothing works. I know these ports work with my other computers. I've reset the SMC and PRAM.It works in bootcamp so this makes me think it's not hardware. Any other suggestions?
I have used ssh port forwarding in the past,I have recently upgraded to Mavericks, but it does appear that my ssh port forwarding stopped some time before this. The last time I know it worked was 5/14/14, and feel it has worked more recently as well.
from my Mac I ssh to my work jump server (port 22, let's say its IP is 11.22.33.44), and my jump server has access to work PC (lets say IP of 10.1.2.3). My work PC has RDP running on it on the common port 3389. I have verified that I can set up a working RDP session at work from another box. Also, I know that my jump server can get to my PC at work as I can ping my work IP if I just ssh straight to my jump server. And I know that there is no firewall stopping me from the jump server as I can also open a telnet session to my work PC on port 3389, without errors.
how I have done it in the past and it has worked, but now recently stopped working in Terminal app:
ssh -f me@11.22.33.44 -L 3388:10.1.2.3:3389 -Nnv
The verbose logging shows that it sets up connectivity. If I then look to see if my local port is listening I can type:
netstat -an | grep 127.0
I will note that port 3387 is in fact LISTENing and waiting for connection
I then start my RDP client app, and start a session to "localhost:3387" (I could also use "127.0.0.1:3387", and have, but it does not work either). My RDP client eventually times out. I have turned my firewall off and on, neither way works.
The verbose log shows the following is setup appropriately (with noted modifications to server names and actual IPs): debug1: Authentication succeeded (keyboard-interactive).Authenticated to somewhere.net ([11.22.33.44]:22).debug1: Local connections to localhost:3387 forwarded to remote address 10.1.2.3:3389debug1: Local forwarding listening on 127.0.0.1 port 3387.
I started to have a perplexing problem that I narrowed down to the audio in-put port on my Mac Pro (MacPro3 ,1). It was working fine then the sound level increased and the quality became distorted (like a "fuzz base" but affecting all sounds)I was in the process of digitizing records, and believed the record played broke. So I got a new record player (audio-technica AT-LP120-USB). The same thing occurred with the audio in-put port, so I switched to the USB port and the audio was fine. I also checked with music already on my HD and it played fine. Consequently it has to be the in-put line port and/or a software issue.
Had been using the Mini Displayport > DVI adapter just fine with both HDTV and Dell monitor, BUT then all output has stopped completely!
No monitor is detected by the laptop (although the display does blink blue, as if it had detected it), tried different cables, different displays, using the Displayport firmware update, speaking to Apple, deleting the com.apple..plist files, etc
today i found that Mail has stopped working for no obvious reason.It wont send or receive emails, but when i check by signing into .mac itself, the messages have arrived and everything appears normal.Mail won't quit either... then every so often a box with the following text appears:'Some actions taken while the account 'enter.mac address here' was offline could not be completed online.Mail has undone actions on some messages so that you can redo the actions while online. Mail has saved other messages in mailbox "on my mac" in "on my mac" so that you can complete the actions while online.Additional information: The connection to the server "mail.mac.com" on port 143 timed out.
I installed 10.5.7 yesterday. Immediately after the installation was complete, my Apple bluetooth keyboard stopped working. Went into Bluetooth system settings, and it said that there was no bluetooth hardware found... (it's built into the machine!!)...
Also, every time I start iTunes, it gives some weird error about Adobe Flash player. I'm not at home now so I don't have the exact wording of the error with me, sorry...
My macbook does not have a firewire port. Is there any kind of adapter that will allow me to use my advc 300 (which need to plug in to the FireWire port)?
My MacBook Pro (OSX 10.6.8) can not find the FireWire port. Until now there hasn't been any problems using the FireWire, but now it just deny any knowledge of it, so to speak.The audio device lights up when I connect it to the MBP (yes, I did connect it when in off-mode), so it seems to work in a way.
Is there a way that I connect a firewire to my MacBook which doesn't have a Firewire port? I need to connect an External HD (not via USB) to my MacBook but just now realised that I don't have a port!
Info:iMac, MacBook Aluminum + 7 more Apples!, Mac OS X (10.5.6)
I have cable TV streaming in through my Firewire port. What is a good program for viewing it? So today I decided to run a cable from our TV room to my laptop desk so I can watch "educational" programming. But I ran into a small problem: CableVision to old VCR so I can make use of its built-in tuner, RCA cables from VCR to ADS (Converts inputs to RCA & Firewire out), and Firewire from ADS to MacBook.
This all works fine but I then realized I have no decent program to watch the video on. I can open Quicktime and see a small window, and no doubt if I hit record the sound would be captured as well but the sound is not audible while monitoring. I tried iMovie and again had a small window to watch. Still not what I want. So what can I use to watch the video from my Firewire full screen and with sound?
my old, mid 2007 macbook had a firewire port that I plug my HD I use for time machine in (it can also be used as USB as well but I prefer it use firewire since I have uses for the two USB ports). Anyways, this new Macbook Pro I have has one too. Except... the connection is smaller on my new Macbook Pro... So I'm guessing there are different connection sizes and I need a new firewire cable? I think my current cable has the same size that both connects to the hard drive as to my old macbook. What labelling would I need to find to find a cable with the bigger connection on one side and the smaller connection on the other
