MacBook Pro :: External HD Will Not Show Up On Desktop Anymore
Feb 29, 2012
My external HD won't show up anymore on my desktop nor does it get listed in disc utilities. I tried to cennect it to another mac but it doesn't show there either nor in that mac's disc utility. I happened to re-start the computer while the hd was connected and now it doesn't show up anymore. I use it for back-up via Time machine. I could re-format and do the back up all over again but then I need to find it first.
I have a broken screen on my MacBook air and have an external screen attached via thundbolt and hdmi connection when I boot up the unit it only shows second screen on external no dock or desktop so can not see system preferences or anything, need to find a way so then when I boot up system the external automatically comes the default screen
My external drive has been used once. It was formatted, partitioned and files were saved on a mac. It showed up on a friends computer running Linux, and it showed up on my PC at home, but it hasn't been turned on since (about two weeks). This is where the problems begin. A few days ago I purchased a new enclosure for my HD (Nexstar 3.5). I took the HD out of it's old enclosure and put it in the new one (I needed the new enclosure for school purposes). I got to school today and plugged it in to the mac, but the drive didn't show up on the desktop. I tried to connect with Firewire 400, 800 and USB 2.0 but no luck with any of them (a USB key worked fine). Just to make sure it was working, I got home plugged it in to my PC and it showed up instantly.
From looking at other threads regarding this issue they all say I have to access the Utility menu. The only problem is since the mac I need to use is a school computer I can't access the Utility menu. It says I don't have authorization to use that menu, and won't allow me to go any further.
I don't know what to do from here. I can't reformat the drive because there is rather important info on there that hasn't been backed up yet. What can I do?
My backup harddrive has suddeny disappeared from my desktop. It happened after I shut off which took loger than usual. I have also two other external harddrives, which are new formatted that does not show up.
i have tried going to the disk utilities and remounting my external drives and checked for an option in system prefs, but my external drives (both flash drive and hard drive) just won't show up on my desktop. My computer isn't even a week old!
My Maxtor 500 external hard drive has suddenly stopped appearing on my desktop. My other external drives appear. I've tried hooking the drive to my MacBook Pro with the same results. The drive however, seems 'active'. The light on the front of the drive does its usual flashing routine when plugged into a new machine. I've never had a crashed drive before. Does it sound like this is what has happened, or does anyone have a clue as to what I should do?
I have three external harddrives all of which are connected through different ports, all show up in finder, all show up in disk utility, but none of them will show up on my desktop. I looked at a few other posts similar to mine but the answers given to other problems have not worked. There is no way all three of my cords are causing a connection problem and I have repaired and verifyd all the drives and still nothing.
Disks I put in the Superdrive, external hard drives, or anything in the USB or Firewire (thumbdrive, etc) -- nothing shows up on the desktop. All are visible in Disk Utility. USB thumbdrives and external hard drives are visible in the sidebar in Finder, but disks are not (only disk utility).
Because of this I can't burn a disk because the disk is not being recognized. In Disk Utility, the external hard drives appear mounted and can be opened in Finder, but why aren't they appearing on my desktop (they used to)?
why wont the mac app store show me the download progress bar anymore? im using Version 1.1.2 (92.8) which seems to be the newest. i today bought a game on the app store which is 15gb. and in the mac app store under "purchased" it wont give me a download progress bar. even in the help file of the app it is said to be there next to the app just bought in the list. however. lauchnpad does give me a progress bar. which is just rather sloppy because it indicates nothing on speed or time remaining. how come mac app store removed the status bar?
This button allowed (in Snow Leopard and even in Tiger) to see the final page full size, or even to save as a PDF file. This functionality is sadly missing on my computer since I have upgraded to LION, making me regret the move. Is there some pref somewhere that I should adjust, or just plainly forget about it. ? When I print, the dialog window does NOT show the Preview button anymore.
So, i bought a used macbook pro (2,2) 15inch 4gb ram, 320gb hd, and it is in GREAT condition, looks brand new. when i saw the laptop, i made sure everything worked, even the usb ports and all is fine.
when i came home, i formatted, and installed Snow Leopard, did ALL the updates before i did anything else. and i just noticed now when i plugged in my 1tb WD Passport it dosnt show up on the desktop, nor the disk utility, however the hard drive light turns on but when i put my hand on the laptop, it dosnt appear to be 'spinning' up.
i tried plugging in USB stick in both USB ports and it works, shows up just fine. so i dont think it could be the usb ports..
BUT when i plug the same external hard drive on my new i7 imac it shows up.yesterday, i plugged in the same drive into a friends Mac Pro, and had no problems. but i cant seem to figure this out.
I don't know what happen, but my Digital western external harddrive dosn't work anymore? I can see the files but I can only copy the files from it and transfer to my mac. I cant read or write? What do I do?
My files are there if I look into desktop folder through the finder but In the real scenario of Desktop The files does not display on the Desktop although they are there. how do I make them appear on the desktop
I have an external hard drive I was using all morning. This afternoon, the hard drive isn't showing up on my desktop. It does show up in my system profiler under usb. When I go to disk utility to repair it, it isn't there.
I have a Lacie Porsche 160 gb firewire drive, it worked well, I ve had it a couple of years. Now when I plug it in it won't show the disk image on the desktop. system profiler finds it and I have the Lacie upgrade tool and that checks it and says it is up to date. I have tried it on two other macbooks one older, one newer all Leopards, and one imac desktop. They all found it. so it appears to be a problem with my laptop only. I did use it with time machine but it ran out of space, Using another laptop I have deleted all lot of stuff off it and tried changing its name.
I got my MBA about 2 weeks ago, and in 3 different occasions some windows and parts of the desktop would show display artifacts. I am attaching snapshots. I didn't recognize any specific pattern that could cause this, and the CPU was not overheating when the fact happened. Every time it was sufficient to reboot the system, and the problem disappeared. I am worried it might be a hardware issue, maybe related to the integrated graphics. Should I have the MBA replaced?
When setting up my MacBook Pro I somehow made the right shift key function as a hotkey for the show desktop function. Now I can't figure out how to return it to being a shift key.
MacBook Pro; 2.8 GHz Intel Core 2 Duo; 4 GB 1067 MHz DDR3; OS X 10.6.8.
The Issue is a duplicate icon of the hard drive appeared on the desktop this AM upon startup.
I don't know what caused it. It just appeared.
It seems to contain everything the start up icon contains when I open it.
I moved it to the trash, but did not erase the trash. I chickened out, so to speak. I removed back to the desktop.
I have the desktop view set to arrange by date modified. It appears approximately half way down the list of icons showing on the desktop. It seems to me that, if it is a duplicate, and by all appearances it is, then it should appear immediately after the real hard drive icon.
I have a thumb drive that if i plug it into my MacBook Air in the left usb port, it takes at least 3 minutes before it shows up on my desktop, sometimes MUCH longer. If i plug it into the right USB port, it shows up after a minute. If I plug this same thumb drive into a PC, it shows up within seconds. If i plug a different thumb drive into either USB port on the Air, it shows up within seconds.
It's a FAT32 thumb drive, and i've already tried reformatting it and the same stuff happens. I've even had disk utility check it out and nothing's wrong. I'd guess the thumb drive is bad but it works instantly if i plug it into a PC, so guessing that's not it. It's a 10.6 MacBook Air.
I have a Macbook Pro 2.16 Core Duo, and I'm wanting to install 10.6, but about a year ago, I cracked my screen to the point that I cannot make anything out on it, and haven't replaced it. Instead, I have just been using it in clamshell mode, which has worked out fine so far. My problem is that I cannot get the 10.6 install to show up on my external monitor.
I searched around, and could only find one other similar thread that just ended with the author putting it in clamshell and having it work fine. When I boot to the install and close the screen, I just get a grey box on my external display with a black bar on either side of it. I can't seem to find any other resources, so I'm not entirely sure what to do at this point. Any help would be greatly appreciated.
i have a problem with my Snow Leopard installation. Since I've installed Snow Leopard, my external USB HD won't work anymore. It's a ICY BOX case with USB 2 and Firewire 400 interface. The mac is a mid 2009 mac mini (9400m).
P.S.: It doesn't show up in the disc utility
PP.S.: I tried two different hard drives in the enclosure, but all worked fine before Snow Leopard!
I have a Toshiba 250GB external hard drive to back up pictures. I can write to it just fine. I also have a Fantom Drive 1TB external. I could write to it last week, but I turned it on this week and I can't write to it. I can still pull stuff off of it, but I can't write to it. What can be causing this? I have already installed MacFuse and NTFS-3G. It doesn't make sense to me that I can't write to it all of the sudden.
