My Macbook pro has started to eject cds and dvds without reading them. This is a new development, it did not used to do this.Â
I have tried a number of different cds and dvds but none seem to be accepted.Â
What can be done...do I need take it in or is the problem fixable?
Info:
MacBook Pro
I'm use toast to put an image file on a DVD, but when I put the DVD in, it just spins around for a bout 8 seconds and then ejects without even acknowledging it anything on the screen. Very annoying. Here's what the disc burning says in "about this mac": HL-DT-ST DVDRW GSA-S10N:
Firmware Revision:AP12
Interconnect:ATAPI
Burn Support:Yes (Apple Shipping Drive)
Cache:2048 KB
Reads DVD:Yes
CD-Write:-R, -RW
DVD-Write:-R, -R DL, -RW, +R, +R DL, +RW
Write Strategies:CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media:Insert media and refresh to show available burn speeds
my iMac won't read some dvds. Specifically at the moment, a factory Paul McCartney live dvd. When inserted, it tries to read it, whirrs and clunks for about 20 seconds then ejects it. It plays on my old G4 1.2dp and both my bluRay player and dvd players in my lounge. I've had problems like this with dvd-r's before but not with factory made dvd's. Since it plays on my home system and G4 I guess it's not a region issue (I'm in the UK) and I can't find any info on the dvd that says it's any particular region. Other factory dvd's can play fine?
Info:
imac 2.66 i5 4g, Mac OS X (10.6.7)
I reset the System Management Controller and it didn't work, and I'm wondering if there's anything else I can try, or if there's a way to definitively determine if my SuperDrive is dead --- I don't MIND replacing the drive, but I don't want to replace a mis-diagnosed good one.Â
Computer: Late 2011, 21.5" 2.5 GHz Intel iMac, OS 10.9.4Â
Info:
iMac (21.5-inch Mid 2011), OS X Mavericks (10.9.4)
The disc player in my iMac doesn't seem to be able to read any dvds and then spits them out. What could the problem be?
Info:
iMac, Mac OS X (10.7.3)
Superdrive not reading dvd movies after lion upgrade.
Also cannot bure DVD -r discs after upgrade. All was fine with Leopard.
Info:
MacBook Pro, Mac OS X (10.7.4)
Hope you can help out here. Been having a few problems reading DVDs ( slightly funny sound when spinning then spits them out ) - although it would read some OK, such as System disk.I out in a DVD just now, and it pulled it in, but then nothing - no spinup at all.And now I can't eject it - tried the eject button, logging out and back in again, restarting while holding down the trackpad button.Nothing worksAny ideas?Macbook Pro 2.8
View 20 Replies View RelatedOur iBook G4 won't recognize DVDs. It reads CDs fine, and I just upgraded the OS to Tiger and it read that DVD as well. However, when inserting a regular DVD (movie, etc., original copy, not burned) it says "this disc contains no volumes recognized by OS". I reinstalled the original OS and software, upgraded to Tiger and have reset the computer and checked the system preferences to make sure it wasn't set to ignore DVDs. The player worked in the past, not sure what is going on.
View 2 Replies View RelatedOur Imac G5 is no longer reading DVDs.
Info:
iMac, Mac OS X (10.6.7), randomly goes to sleep
I've rented 3 dvds from Netflix and tried to watch them in my MBP, thinking there was a problem with the dvd, but they all have the same issues. The video will suddenly freeze but the audio keeps going. The only way I can get out of this frozen screen is to use the remote that came w/ my MBP to eject the dvd. Also, the dvd menus are no longer functional. I can only press play but I can not navigate the menus with my remote, or with the mouse (the mouse cursor disappears now when I put a dvd in the drive). When I press play, it will play for about 10 minutes and then freeze. It seems like each time it's freezing about halfway into a track/chapter. I can eject the dvd, go back to the beginning, skip forward to the next track, and rewind to just after the point where it freezes, but I have to do this with EVERY track/chapter.
And I have to eject it every time or it won't play at all. This is a dvd-burning Superdrive. I have no idea how I would go about replacing the drive if it's broken, as it's built into the laptop with no way that I can see to access it. The laptop is just barely out of warranty. Here's another Mac oddity: when I log into Apple's own forums, the option to post a new thread in any of their forums is gone. It's not at the top of the page where it used to be, nor is it anywhere on any of the pages that I've visited. I'm talking about when I go to the main discussions page, and then click on the link for Macbook Pro or iPod, there's nothing there for posting.
I got a new 1tb WD internal hard drive and I took it out of the box and popped it right into my macbook pro 15". It fits and i am able to easily close the back on the computer. My only problem is that when i start up the computer, it loads for a few minutes, but 100% of the time after about 3-4 minutes i get a notice saying I did not eject the drive safely and all that. After that the internal hard drive is no longer there. I cant see it in my finder, or disk utility. BTW I am booting from my old hard drive externally. What would cause the new internal hard drive to eject itself?
View 6 Replies View RelatedI am trying to use a WD Passport 1T external hard drive with my MacBook Pro but everytime I use the USB port it is recognized but shortly afterwards it ejects itelf from my system. How can I prevent this?
Info:
Mac OS X (10.7.3)
I have problems with my CD/DVD drive. Any cd i place in ejects after 5 to 10 seconds.
Info:
MacBook Pro, Mac OS X (10.7.4)
I own a Macbook Pro, it's a A1150 model with an Intel Core Duo processor. I'm trying to use my install disc but every time I try to use it, the cd drive reads it for a few seconds but then just ejects it afterwards. What can I try to get it to work? My laptop came with the 10.4.5 install disc and I upgraded to 10.6 Snow Leopard via disc (the disc itself just says 10.6). I have all my software updates and it shows I have OS X version 10.6.8 currently installed.
When I turn on the computer with the 10.4.5 disc already inserted and hold C it just boots up like normal and ejects my install disc. Likewise when I try with the 10.6 Snow Leopard disc it does the same thing. I've tried holding the option key and it still just ejects the disc after it reads it for a while. Both discs are genuine (not copies) in pretty much like new condition without and scratches/smudges/dirt and my Superdrive reads/burns cd and dvd's just fine.
Info:
MacBook Pro 15", Mac OS X (10.4.7)
When I insert a DVD into the MacBook Pro Drive it makes a loud spin noise and the DVD ejects. I've tried with multiple DVD's and still experiencing the same problem.
Info:
MacBook Pro
when ever i put in a DVD or Music CD into the disk drive of my macbook, for a few seconds nothing happens then it ejects it.Now im not sure what to do.Have apple look at it, try to clean it, ideas?
View 1 Replies View RelatedMy IMAC which I purchased in December 2009 is ejecting the dvd when I insert the DVD into the drive. Yes I have tried numerous DVDs and it does the same thing. What is the problem?
View 3 Replies View RelatedI have a 20 inch iMac. Several moments after inserting a CD for importing via iTunes, the disc drive sounds like it struggles to read the disc and then ejects it!
View 4 Replies View RelatedIt's only started happening in the last week but my warranty has ran out. What solutions are there other than having a tech guy pull the machine apart?
View 5 Replies View RelatedSince aquiring my own Mac G4 digital audio for dirt cheap (£0 ) I've been reassembling the peices. It works entirely, but I have a strange problem with the optical drives. Since the guy I had got it from removed almost everything (RAM, CD/DVD, HDD), I used spare parts to get it running. It boots into OSX 10.5 fine and everything seems to work ok, but upon powering the mac up, it ejects the DVD drive tray when the gray screen shows. It's done it with every drive I have tried and stops me from booting from CDs.Â
Is there any reason it could be doing this? These drives I know work 100%.Â
Info:
Power Macintosh G4 Digital Audio, Mac OS X (10.5.8)
[code]...
Macintosh HD Boot Mode:
Normal When I insert a DVD or high capacity disc, I can hear it spinning and reading and then eventually ejects the disc. I never get any indication that the computer has read the CD/DVD. No Disc icon ever shows up on the desktop.
Info:iMac (21.5-inch Late 2009), Mac OS X (10.6.8) Boot ROM Version
I have an external hard rive that has worked with my macbook air before, I have it plugged in to the laptop and the power on the hard drive is on but the computer is now not recognizing it, how can I get it to recognize the external hard drive?
Info:
MacBook Air
I just got an external LaCie DVD burner (long story). It works great, but as of right now I can apparently only eject it by right-click > eject or drag it to the "trash." Is there any way to allow me to just use the button on the drive or tie it to the eject button on the keyboard when it's connected, or even another key command like Opt-Eject?
View 1 Replies View RelatedI recently had to reinstall iTunes with help from tech support after it kept crashing and now my disc drive is ejecting any disc that I put into it.
Info:
iMac (21.5-inch Mid 2010), Mac OS X (10.6.8)
My friend is offering me his 2008 macbook pro for 650 should I do it here are the specs
Model Family: MacBook Pro
Display: 15"
Processor Type: 2.6GHz Core 2 Duo
Model Number: A1260
Color: Aluminum
Factory: China
Production Year:2008
Production Week:22 (May)
Production Number:774
200 gb hd
4gb of ram
also apple care til jun 11
OK so I bought the computer for 650 from my friend and soon after buying found a problem. The problem was the optical drive not reading all the disc that I put in the system. So I took the macbook pro to apple they installed a new super drive. I get home today and try to install snow leopard and have a issue. The way I went about was starting up holding the option button and waiting to boot from the disc for a fresh install. First time I tried I got a symbol that look like the restricted sign you see when you cant smoke in a area ect... So I restart and try again this time I get to the install screen click does the estimation ect.. 34 minutes than goes to 28 minutes pretty much has frozen there now, and after waiting all this time about 20 minutes I get the spinning beach ball. Also forgot to say that the super drive is now super dooper annoying loud and make odd sounds too with vibration. So I guess make another apple gen bar apt? And have them possible replace the super drive again?
I currently just got a macbook pro 2011, 15". Two internal drives (120 GB SSD for OS and Programs, 750 GB HDD for Data) & external USB Optical DVD/RWÂ The issue I'm having is when I insert a real DVD into the external optical drive (which is the orignal from the macbook pro not store bought) it doesn't read the DVD. I have installed Quicktime, VLC player and everytime the external just gives me the VIDEO AND AUDIO TS folders. what I need to do so I can play DVD's from my external? Â
Info:
MacBook Pro, Mac OS X (10.7.4)
Super drive ejects blank CD's & DVD's. Played music CD fine but could not run the system disk for an archive re-install. It made lots of noise & ejected.What can I do to try the re-install. G-5 PPC OS X 10.4.11Â
Info:
iMac, Mac OS X (10.4.11), PPC
i recently purchased a second hand iMac, everything is working fine on it apart from one wierd problem when i insert a DVD into the superdrive it decides to eject the disk by itself, and if I insert a CD it plays fine. Im on 10.7.4 (os x lion)
Info:
iMac, Mac OS X (10.7.4)
Basically, my friend got his new MacBook Alu for Christmas, but currently all the hard disk is doing is reading constantly, even when he has nothing running.
View 2 Replies View RelatedI have a late 2009 MacBook pro, running the latest version of Lion. Last week, I experienced a Kernel panic at start up, and was unable to launch the OS, even with the recovery boot. Starting in verbose told me that there was a sata issue. I opened the computer, replaced the internal hard drive with lion set upon it, and tried to start again, without any success. I bought a SATA-USB cable to plug my old hard drive. My computer is now running normally, but with the former internal hard drive plugged in USB.
Disk manager sees the new one and I can read data written upon it, but I can't write anything nor erase or partition it. So both the hard drives are OK (I tested them in a friend's MacBook pro and it worked), the computer seems OK too, because I'm running it presently, but any internal hard drive won't work. The cable that links the hard drive to the motherboard does not seem to be damaged, however, the status indicator light is not working since that time.
Info:
MacBook Pro, Mac OS X (10.7.3)
