MacBook Pro :: Why Install Disc Not Working - CD Drive Reads Then Ejects It
Jun 9, 2012
I own a Macbook Pro, it's a A1150 model with an Intel Core Duo processor. I'm trying to use my install disc but every time I try to use it, the cd drive reads it for a few seconds but then just ejects it afterwards. What can I try to get it to work? My laptop came with the 10.4.5 install disc and I upgraded to 10.6 Snow Leopard via disc (the disc itself just says 10.6). I have all my software updates and it shows I have OS X version 10.6.8 currently installed.
When I turn on the computer with the 10.4.5 disc already inserted and hold C it just boots up like normal and ejects my install disc. Likewise when I try with the 10.6 Snow Leopard disc it does the same thing. I've tried holding the option key and it still just ejects the disc after it reads it for a while. Both discs are genuine (not copies) in pretty much like new condition without and scratches/smudges/dirt and my Superdrive reads/burns cd and dvd's just fine.
Info:
MacBook Pro 15", Mac OS X (10.4.7)
View 5 Replies
ADVERTISEMENT
Jan 16, 2010
I wanted to use Onyx to check the status of my new macbook pro and it told me that the startup volume needed to be repaired. I tried first of all a safeboot as I understood that this would do a disc check but I wasnt told anything from that.
So I then inserted the disc OS X install dvd (10.6) and restarted the MB. After the chimes, i pressed the 'c' button. I have tried two times, once just pressing the button, once pressing & holding (no-where does it say which to do). I have found on searching alo that I may need to press the 'option' key but I have no idea where this is!
Anyway, the disc makes a repetative noise and then ejects, and then the MB starts up.. but not from the disc.
What am I doing wrong please??!
Model Name:MacBook Pro
Processor Name:Intel Core 2 Duo
Processor Speed:2.66 GHz
Number Of Processors:1
Total Number Of Cores:2
L2 Cache:3 MB
Memory:4 GB
Bus Speed:1.07 GHz
View 5 Replies
View Related
Apr 11, 2007
I have a 20 inch iMac. Several moments after inserting a CD for importing via iTunes, the disc drive sounds like it struggles to read the disc and then ejects it!
View 4 Replies
View Related
Aug 25, 2009
It's only started happening in the last week but my warranty has ran out. What solutions are there other than having a tech guy pull the machine apart?
View 5 Replies
View Related
Jun 23, 2012
[code]...
Macintosh HD Boot Mode:
Normal When I insert a DVD or high capacity disc, I can hear it spinning and reading and then eventually ejects the disc. I never get any indication that the computer has read the CD/DVD. No Disc icon ever shows up on the desktop.
Info:iMac (21.5-inch Late 2009), Mac OS X (10.6.8) Boot ROM Version
View 3 Replies
View Related
Mar 27, 2012
I recently had to reinstall iTunes with help from tech support after it kept crashing and now my disc drive is ejecting any disc that I put into it.
Info:
iMac (21.5-inch Mid 2010), Mac OS X (10.6.8)
View 3 Replies
View Related
Jun 3, 2014
I have an aluminum Macbook from late 2008, model A1278. I just had to replace the hard drive, and need to install an OS on the currently blank HDD. Problem is, my CD drive doesn't work, so I can't just install from a disc. I had installed Mountain Lion on my old hard drive, but the original OS was Snow Leopard. I haven't succeeded in getting any of my information off my old HDD. Is there another way to install either Snow Leopard or Lion onto my new hard drive?
View 1 Replies
View Related
Mar 15, 2012
My iMac is making the most terrible noise when burning a disc, and after two or three tracks are burnt it gives me an error message and then will not burn anymore?
Info:
iMac, Mac OS X (10.6.8)
View 3 Replies
View Related
Dec 29, 2010
I have a macbook my old hard drive I guess malfunctioned because when I start up there is a folder with a question mark. So I installed a new hard drive however I do not have the original discs the only discs I have are to my 21in Imac is there anyway to install this without buying new discs or is there anyway to recover my old hard drive I think I deleted a folder I suppose to when I tried to restore so now I have 2 hard drive no OS and a macbook I can't use
View 6 Replies
View Related
Feb 1, 2012
Okay so I have a white MacBook that I'm trying to upgrade from Leopard to Snow Leopard. It's on the latest version of Leopard, 10.5.8. So I have a family pack DVD for Snow Leopard that's got 2 installs left on it. So I decided to go ahead and use one on my MacBook. I put the disc in the drive and I could hear it spinning around in there. But then nothing. My computer won't even read it. It doesn't show up on the desktop, it doesn't show up in disk utility, and pressing the eject button on my keyboard does nothing, like it doesn't even TRY to eject it. I've tried the reboot + holding down the trackpad, it did nothing. I tried typing drutil tray eject in terminal to force it to eject, it also did nothing. It's not like theres anything thats really stopping it from coming out, it literally just won't even attempt to eject the disc.
It seems like my computer isn't even recognizing theres anything in the drive, the fact that it doesn't even show up in disk utility is worrying me. I've used this drive with other discs before, but never had this problem.
View 3 Replies
View Related
Jan 30, 2010
I'm using a iMac PowerPC G5 that I've received from my brother. He gave it to me with a fresh install of Leopard on it, but he unfortunately no longer has the disc that came with the computer that he also used to format it before handing it to me. With that said, I ordered a new internal hard drive. Naturally, I'll need to re-install Leopard, but I don't have an install disc anywhere. How is this going to be possible? Or will it not be? Do I have to buy a new Leopard install disc? If so where and how much?
View 6 Replies
View Related
Apr 11, 2012
So I have noticed that my optical drive will not read any type of music or data/software cd. It tries, but then it spits it out. It reads DVD's just fine.
Info:
MacBook Pro, Mac OS X (10.5.8), lion
View 2 Replies
View Related
May 29, 2012
I have an Intel-based iMac desktop that suddenly began to have cd drive issues. Whenever I put any disc into the drive it almost goes all the way in and then it automatically ejects the cd. The cd never goes fully into the drive. My iMac is still under warranty but I really dont want to send it in but I will if I must.
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.4)
View 3 Replies
View Related
Nov 21, 2008
Is it possible to put the remote disc install file on a flash drive so that I could install the remote disc program onto a computer from the that instead of a cd?
View 2 Replies
View Related
Apr 10, 2012
never really had a terrible problem with this computuer until the last few months with the battery wearing out and having to replace the charging cord twice but now it seems like I have a problem here. Earlier today, less than an hour ago, i burned a CD for my buddy, when i went to burn the second disk, it didnt want to accept it. Finally, when it did, it wouldnt read I had a disk in it. When i got home, i tried other cds/dvds and it wouldnt read them either. It was making a rather bad sound, kind of like an alarm sound. The CD will not spin and is ejeceted shortly after. I was planning on bootcamping my Macbook Pro later this weekend, but if i can not get this to work, I wont be able to. I dont think i have Apple Care and the nearest apple store is about a 2 hour drive from my house.Â
Info:
MacBook
Pro, Mac OS X (10.6.8)
View 3 Replies
View Related
Feb 12, 2012
The disc player in my iMac doesn't seem to be able to read any dvds and then spits them out. What could the problem be?
Info:
iMac, Mac OS X (10.7.3)
View 1 Replies
View Related
Sep 15, 2010
I got a new 1tb WD internal hard drive and I took it out of the box and popped it right into my macbook pro 15". It fits and i am able to easily close the back on the computer. My only problem is that when i start up the computer, it loads for a few minutes, but 100% of the time after about 3-4 minutes i get a notice saying I did not eject the drive safely and all that. After that the internal hard drive is no longer there. I cant see it in my finder, or disk utility. BTW I am booting from my old hard drive externally. What would cause the new internal hard drive to eject itself?
View 6 Replies
View Related
Apr 16, 2012
I am trying to use a WD Passport 1T external hard drive with my MacBook Pro but everytime I use the USB port it is recognized but shortly afterwards it ejects itelf from my system. How can I prevent this?
Info:
Mac OS X (10.7.3)
View 4 Replies
View Related
Jun 28, 2012
I have problems with my CD/DVD drive. Any cd i place in ejects after 5 to 10 seconds.
Info:
MacBook Pro, Mac OS X (10.7.4)
View 2 Replies
View Related
Aug 30, 2014
My Macbook pro has started to eject cds and dvds without reading them. This is a new development, it did not used to do this.Â
I have tried a number of different cds and dvds but none seem to be accepted.Â
What can be done...do I need take it in or is the problem fixable?
Info:
MacBook Pro
View 2 Replies
View Related
Jun 2, 2008
Well, my question is very simple: I have a MBA and this other laptop from work, a crappy HP which is old as hell. I'm planning to use Remote Disc to reinstall my Leopard, since the upgrade to 10.5.3 really screwed things here, and I can't figure out why. Point is: instead of running all Leopard installation thru Remote Disc, I would prefer to share Leopard disc 1 over Remote Disc and restore it to a partition on my external HD, making a clone of it, which would install *much* faster. Has anyone tried anything like this? There's any Windows program which allows me to rip a Mac DVD to a Mac partition?
View 2 Replies
View Related
Oct 11, 2009
Trying to upgrade form 10.5.8 and upon the first reboot, the DVD ejects and the upgrade will not continue. Prior to the reboot, the only message is that the installation will continue after it reboots but it never does. There are a bunch of pkg files in the MacOSX Install Data folder. Has anyone seen this before of do you know how to manually continue the installation? It's acting like the media may be bad but I have no other MAC to test it on and no access to other install media to test. I was able to copy the contents of the dvd drive to an external drive but unfortunately it won't let you install from that volume.
View 3 Replies
View Related
Sep 12, 2009
My iMac in my sig is what's giving me the issue. I was updating to 10.6.1 and I got a folder with a question mark symbol on reboot. So I tried reinstalling sl and nothing happens. Put the disc in and nothing happens. Is there a way to get the disc out at all? I tried the eject button on the keyboard.
View 1 Replies
View Related
Jun 15, 2012
I just got a new Mac Mini at work today. I noticed something missing from its small box. Is it supposed to come with a Mac OS X 10.7.x install disc/USB flash drive or something in case I ever need to reinstall, fix, etc.? I only got these items:
1. Mac Mini
2. DVI to HDMI adapter
3. Power adapter
4. White Apple stickers
5. A manual (didn't see any disc and USB flash drive in it?)Â
If I am missing it, then I hope I don't have to return since I already set it up, installed a bunch of software, copy my data, etc.
View 5 Replies
View Related
Dec 5, 2008
I have a Quicksilver 933 with 1.5GB ram and 2 internal hard drives (WD 320GB, Maxtor 80Gb). Operating system is 10.4.11, Boot ROM is 4.2.5f1. It's my understanding that some QS were produced with the ability to use larger hard drives. Mine does not and I am wondering what I can do to correct this. Computer sees and writes to both drives. The 80 is fully usable but 320 only allows 128 of storage. Disk utility sees whole drive as just under 300Gb but I can't use more than 128. I have ATA HiCap driver that will allow me to partition into sections but it's a pain. Is that my only option or buying a card?
View 1 Replies
View Related
Aug 26, 2014
When I insert a DVD into the MacBook Pro Drive it makes a loud spin noise and the DVD ejects. I've tried with multiple DVD's and still experiencing the same problem.
Info:
MacBook Pro
View 1 Replies
View Related
Sep 3, 2009
My 3 year old MacBook's ComboDrive doesn't work and I was wondering if I could Install Snow Leopard via a shared SuperDrive from a MacBook Pr over Wi-Fi. Is it possible to copy the installer locally and then install Snow Leopard or would I have to get an External SuperDrive?
View 2 Replies
View Related
Sep 4, 2010
I've just bought a new 500gb HDD, and 4gb of RAM for my late '08 MacBook. However, when I started to look for my Leopard install disc, I couldn't find it. So, I was wondering... The old HDD is running Snow Leopard, and is still in the computer. My friend has a MBP, which came with the Snow Leopard DVD. Would it be possible for me to back up the old HDD with Time Machine, install the new HDD, insert his Snow Leopard DVD, format the drive with Disc Utility, and then restore from Time Machine (with all the drivers/etc) installed?
The only thing I'm worried about is, I replaced the old HDD because it had some error - ivalid node structure - or something. The drive still works, but would the problem affect anything/be carried over? I'm not so concerned with keeping the files, I just want to have all the drivers/etc installed on my mac, and I couldn't think of another way. Woul this be possible, or is there an easier way?
View 3 Replies
View Related
Jun 3, 2012
How can I install snow leopard without an optical drive? Could I take it to an apple store to get it installed or can I copy the cd over to a usb pen drive?
Info:
MacBook, Mac OS X (10.5.8)
View 1 Replies
View Related
Dec 11, 2014
I am working on a Mac book Pro and I have been getting a message that my disc drive is full. How do I clear some space? I'm running OS X v 10.9.5
Info:
MacBook Pro, OS X Mavericks (10.9.5)
View 2 Replies
View Related
