MacBook Pro :: Connect Epson V600 Photo?
Feb 4, 2012I can't connect my new Epson V600 Photo because when i start to download the configuration the program close automatically.
Info:
MacBook Pro (17-inch Mid 2009), Mac OS X (10.7.3)
I can't connect my new Epson V600 Photo because when i start to download the configuration the program close automatically.
Info:
MacBook Pro (17-inch Mid 2009), Mac OS X (10.7.3)
a new epson v600 scanner will not communicate with my iMac running OS X 10.8 - get the blinking yellow error light. Epson says the scanner is fine. I have updated all Apple software, incl. Epson drivers.
View 5 Replies View RelatedAfter I installed Epson Printer software version 2.1 and I totally lost the communication to Epson V700 Scaner, the scanner keep reset the power.
Finally the error message: Cannot communicate with the scanner.
Info:
MacBook Pro, Mac OS X (10.7.1)
I have the above printer connected to my iMac and it has been working flawlessly for months. I have one issue though. When the printer is running low on ink, the maintenance light blinks, indicating low levels. But, it doesnt tell what ink cartridge is low, and since i dot want to go all out and change them all, i need to know how to view levels. On my Mac, it only says information not available for supply levels, and as far as I know, there is no way to check on the printer itself. Does anybody know how to view the ink levels, either on the printer or my iMac?
View 7 Replies View RelatedMy Epson stylus Photo 890 has a fault. Both red and green lights continue to flash when the printer is switched on. The printer was working fine and then after starting a new batch of printing the above fault occured and now I cannot get the printer to work
View 3 Replies View RelatedI have an Epson Perfection 3170 Photo scanner. It is a fine scanner that has served me well for many years through many different operating systems, Windows as well as Mac OS X. The scanner software is no longer supported by Epson for OS X Lion. The only way I can now san is by using the drivers that are built into the OS. I can access the scanner either through System Preferences/Print & Scan, or use Image Capture. Unfortunately, all the scans are of an extremely poor quality. I can no longer scan fibrant colors or stong blacks, the entire scan is now murky and all colors as well as the blacks and greys are faded.
Info:
iMac, Mac OS X (10.7.3)
I have an iMac with a 2.8 GHz Intel Core 2 Duo processor and am running Mac OS X 10.7.3. My Epson Perfection V700 Photo Scanner worked great with Snow Lepord but now does not work with Lion. I downloaded the driver for Mac OS X 10.7 but I continue to get the message "Cannot communicate with the scanner. Make sure the scanner is on, correctly setup and connected with no errors in the scanner. If using an SCSI connection, restart your computer."
I have connected the scanner with USB and then with Fire wire and then both. I have deleted and redownloaded the driver files. I could not get communication. Can anyone help. The scanner and iMac are too large to drag to a genius bar.
I have MacBook OsX 10.5.6. Had a direct printer connection but recently decided to hook up my Epson R1800 stylus photo printer through TC. I removed the old default printer and added it through System Preferences-> Print and Fax. It is recognized as a Time Capsule Printer, bonjour kind.
But when I press print i get for 2 seconds window saying that page is printing but printer queue is empty and nothing happens. It feels almost as if printer is not hooked up. I can not locate this printer on Epson Utility (separate software) either. Does anyone have or had in the past similar problem?
How can I increase the printable area for my Epson stylus 890?? Especially the bottom margin is huge. I�m using Mac OSX 10.4.11.
View 1 Replies View RelatedSince I updated my Imac to snowleopard, there is no more printing on the good old epson stylusphoto1200 incjetprinter. even after downloading abaout 1 gigabyte (or 2) of Epson-drivers (from the apple-site) nothing works (" you need to update the software of your printer".. , but everything is updated on softweáre-update..)
Info:
epson incjetprinter, Mac OS X (10.6.8), stylus photo 1200
After the last software update my printer wasn't recognizing ink cartridge. So I uninstalled its software. Now I can't find its drivers anywhere. Epson's website says check your Mac software updates and doesn't offer to download the driver directly. But there are no available updates for my computer as of now. How do I find and install the driver?
Info:
iMac, OS X Mavericks (10.9.4), Epson Stylus Photo R3000
I'm trying to print a .psd image from Photoshop CS5 using my Epson Photo Stylus 2400 printer. Yesterday, I downloaded a suggested upgrade and it hasn't worked since then. I used Time Machine and replaced the Epson utility with the old one. I then get a message:
Waiting for printer to become available... and nothing happens. I need to be able to print!
I'm using Snow Leopard 10.6.8
Info:
iMac intel processor, Mac OS X (10.6.8), see above
How do you get the supply levels for the Epson Stylus Photo 1900 to appear in the printer utility window?
Info:
iMac, Mac OS X (10.7.2)
I have a Firewire Epson Stylus Pro 4800 on a G4 running OSX10.2, this is on an ethernet network connected to 3 MacPros. I've just upgraded from 10.5 to 10.6 and can no longer see the Epson on the network. As Appletalk is no longer supported on Snow Leopard, is there a way to connect to the Epson? I've tried adding an IP printer using the G4's IP address with the Epson print driver, but no luck.
View 2 Replies View RelatedI have downloaded the most recent print driver download from Apple. The computer "recognizes" the printer, yet when I try to print anything I get a "Communication Error" message in the Printer window.
Info:
iMac, Mac OS X (10.7.2), new imac quad core
can't get my wirless printer to connect to my Mac
Info:
iMac, OS X Mavericks (10.9.5)
I used clean genius and i deleted old photo the iphoto, i want have again my photos?
Info:
MacBook Pro, Mac OS X (10.7.3)
I have Adobe Photoshop Elements 9 on my iMac. I also have iPhoto as it came with the iMac when I bought it. I don't really want to use iPhoto at all. I want to use PSE. How do I set my computer to open PSE when I insert my memory card or when I plug in my iPhone or for any other thing that uses photos? Can I just completely uninstall iPhoto?
Info:
iMac, Mac OS X (10.7.3)
I can not realize to remove photo's from photostream
View 1 Replies View RelatedFor some reason when using my apple tv and photostream there are a few photo's appearing on my tv that I do not want to be included in photostream. I have checked the iphoto - photostream folder and the photo's are not even in there. I have also reset my apple tv and still they are appearing. what can i do?
Info:
AppleTV 2, iOS 5.1.1
I use a MacBook Pro to print to an Epson 9800 roll printer -- been doing this for years with no problem.
UNTIL NOW! All of a sudden, the Epson is laying down huge quantities of ink, especially when I print onto film (for screen printing). It puts down so much ink, the ink dribbles down the film and drips off the printer, pooling on the floor, until I leap up and cancel the job. What's more, the printer is printing a light-colored background to images that had no background to begin with.
Here's the catch: *this only happens in Photoshop.* (I'm using CS 5.1.) If I take the same image file, place it in Illustrator, and print it, it comes out just fine. So the problem lies in Photoshop's print options. Somehow, something got changed in the last couple weeks, and I have no idea what.
I'm hoping that someone here will be familiar with this *particular* printing problem, and what the *specific* Photoshop printing option might be that is causing this.
Info:
MacBook 2.4 GHz Intel Core 2 Duo, Mac OS X (10.5.6)
Has anyone been able to get their Epson scanner to open in Photo Shop CS3? I can open the scanner only from the Epson Scan utility.
CS3 on my desktop (Dual G4 MDD) will allow me to open the scanner directly in the File/Import menu of Photoshop with Twain.
Info:
MacBook Pro, Mac OS X (10.6.8)
Have macbook running OS X 10.5.7. Bought an Epson NX100 printer from Target for $30, it says Mac compatible, but my macbook won't recognize the printer. I tried installing the new printer but there is no "Epson NX" from the drop down menu.
Usually with new printers you can just plug it into the USB port, install new printer, and you're set.
Epson Stylus NX515 appears to be connected to network, WiFi light is on but it doesn't show up in the Mac's printers list.
View 1 Replies View RelatedI am having trouble installing my new espon artisan 730. When I add the printer to the print queue selection, it says that software is available from Apple for download. When I click download and install, it then tells me that the software isn't available and I can't install the printer.
Info:
MacBook Pro, Mac OS X (10.7.3)
Just loaded snow leopard and my Epson Sylus Photo rx580 won't print?
Info:
MacBook
Pro, Mac OS X (10.6)
I recently purchased a mabook pro and would like to make it wireless printing with my espon printer...the epson has already been installed by putting the usb cord in but i wish to make it wireless so I don't have to use the cord all the time, how can I go about this...
Info:
MacBook Pro
I can no longer print from my maac to my epson. By either USB connection or wifi. It just won't connect and all I did was move house.
Info:
MacBook Pro, OS X Mountain Lion (10.8.5)
Has anyone been able to print to CD's on Epson r320 when I try to print to the CD tray, I get an error message saying the CD tray is open and the job is automatically stopped. I found the new printer drivers for Intel machines on Epson's site and installed them. and even up dated the drivers by apple.com site . but it just keeps giving the same error and in the choose media type box , it wouldnt allow my to choose dvd/cd.
View 4 Replies View RelatedI have purchased a macbook pro and have been using illustrator and Photoshop to design posters. I then purchased a Epson artisan 1430 printer. And the colours are way off. The screen colors are lovely and vibrant and the print colors are much more dull. I have been told I need to calibrate my macbook to the printer settings?
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.5)