OS X :: PC Won't Print To Mac Shared Printer?
Feb 21, 2009
Made a custom TCP/IP port on the PC. Assigned my Mac's IP address 192.16.1.101 as the location of the printer. Made sure protocol was set to RAW. Everything should work but the print job never makes it to the Mac. The print que on the PC shows error and the print que on the Mac never shows anything. I decided to delete all the printers on the PC, plug it in directly to the printer via usb and let it install the drivers, print test page etc... After that I reconnected the printer to the mac, pc to the network and just changed the port on the printer properties to reflect the IP address. It still didn't work. I can't seem to find any more information on what to do next. The PC is running Win XP and the Mac is on Leopard. Another thing, how does the PC know which printer to use if the Mac has two attached? I disabled sharing on the other printer thinking the PC might have been confused.
View 2 Replies
ADVERTISEMENT
Oct 28, 2010
We have a broken networkport on our HP Laserjet P2015dn, and need it to print from 4 macs in the office. 3times osX 10.4.11 and 1time osX 10.6.4 (all except 1 non-intel; running windows XP via Parallels and connected on the general office network). I am currently sharing the printer via USB (broken networkport) connected via a Mac using 10.4.11. I can print from every Mac, obviously. However, I can't print or know how to set this up for use in Windows (parallels).
View 1 Replies
View Related
Dec 21, 2010
Is it possible to print from Snow Leopard to a Windows 7 shared printer?
View 3 Replies
View Related
Sep 30, 2008
I'm trying to set up a shared printer on windows. The printer is physically hooked up to an iMac G5 via USB and I'm trying to set the printer up on my xp machine. I followed these instructions and aside from a few things that weren't the same as explained (I'll go into further detail below), everything went fairly smoothly. I was able to add the printer and print a test page, but when the test page came out, everything was mirrored. I blurred the printer information because I just grabbed the image off the net and reversed it. The printer information on the image had nothing to do with my own printer. Now about the things that were slightly different than in the steps from the link above:
Step 4: there was no usb printer item in the list, but the printer name DID show up: HP Deskjet 6500 Series usb, so I selected that
Step 5: I did not have to enter the URI manually. I think by selecting the printer name in Step 4, it automatically entered the URI of the printer.
The printer is a HP Deskjet 6540 running on OS 10.5, fully updated. The Windows machine is running XP SP3, fully updated. I've done a lot of fiddling around and just can't figure it out. The driver I'm using on the windows machine is the drive directly from the HP website for my specific HP printer. Alternatively, I also tried adding the printer to CUPS by the following steps:
- start terminal
- type lpinfo -v to get the URI of the printer
- type lpadmin -p <printername> -E -v <uri> -m raw
View 8 Replies
View Related
May 17, 2009
How do I print to a vista shared printer? I went into print/fax, click + to add printer, click windows button but shows nothing. not really sure where to go from here.
View 7 Replies
View Related
Sep 2, 2009
So, I've joined my home workgroup (I think?) and yet when I go to the 'network' tab in finder NOTHING shows up other than the 2 PC's whose IPs I added manually (so I could see their network drives).
I've searched and searched and cant for the life of me get this printer working.
It's a Dell 1700 printer connected to a networked XP machine, and all the PC's in my house can see/use it just fine, but for some reason on my MBP I cant at all.
View 4 Replies
View Related
Apr 28, 2012
Have just added a wireless Canon printer to my local network. Have a shared print queue on a Mac Mini. Have modified the printer options for this printer/queue using CUPS on the Mini.
Identified as a shared printer. Expanded options using CUPS, these options appear in the Mini "print" panel. Can see printer over network on another Mac.Cannot see printer presets, or expanded options on this machine "print" panel.Copies presets .plist from Mini to local machine, now see presets {this is suboptimal - the OS should see the shared presets).
Cannot see epanded print options on local machine. I would expect the expanded options would be visible to
any network machine connected to this printer/queue. What am I missing?
Info:
PowerMac, Mac OS X (10.5.8), plus other Macs
View 4 Replies
View Related
Dec 27, 2010
I'm new to Mac OS X, but have been working with Linux for almost 9 yrs now. I have set up a Linux box with CUPS 1.3.9. I can print from the server, and from other Linux stations to that remote server. However, I can't print from a client MacBook.
I set up CUPS on the client Mac via http://localhost:631 and created a printer associated with the remote queue / printer on Linux (the URL I use on OS X is http://mylinuxserver:631/printers/hpprinter and the driver is RAW).
I have no problems sending a test page from the CUPS web interface on Mac OS X to the Linux server -- the test page gets printed OK. However, I can't see the printer I just defined from other Mac OS X apps, and neither can I see it from the Add Printer Dialog on System Preferences (it's empty).
I tried creating the printer at the Add Printer dialog, but it would neither let me specify an HTTP URL (as far as I know, I had to use the IP icon on the toolbar) nor specify "RAW". So I tried creating a "dummy" printer in the Add Printer dialog, with a basic config, and then changing it from the CUPS web GUI. This didn't work either, since when I went back to the Add Printer dialog, the printer was gone.
View 24 Replies
View Related
Feb 15, 2010
I'm new to Mac OS X, but have been working with Linux for almost 9 yrs now. I have set up a Linux box with CUPS 1.3.9. I can print from the server, and from other Linux stations to that remote server. However, I can't print from a client MacBook.
I set up CUPS on the client Mac via http://localhost:631 and created a printer associated with the remote queue / printer on Linux (the URL I use on OS X is http://mylinuxserver:631/printers/hpprinter and the driver is RAW).
I have no problems sending a test page from the CUPS web interface on Mac OS X to the Linux server -- the test page gets printed OK. However, I can't see the printer I just defined from other Mac OS X apps, and neither can I see it from the Add Printer Dialog on System Preferences (it's empty).
I tried creating the printer at the Add Printer dialog, but it would neither let me specify an HTTP URL (as far as I know, I had to use the IP icon on the toolbar) nor specify "RAW". So I tried creating a "dummy" printer in the Add Printer dialog, with a basic config, and then changing it from the CUPS web GUI. This didn't work either, since when I went back to the Add Printer dialog, the printer was gone.
View 8 Replies
View Related
Mar 1, 2010
I'm using a MacBook, Mac OS 10.5.8. I've downloaded the driver for HP LaserJet m1319f MFP and the printer worked fine when I connect it directly to my MacBook (using USB connection).The problem is that printer is supposed to be connected to our office network users through a TP-Link Print Server (TL-PS110U). I've tried to use AppleTalk to connect to that print server but my MacBook only recognized that HP printer as a HP Fax machine and I can't print anything.
View 6 Replies
View Related
Apr 12, 2012
The Excel program I'm trying to print Excel 2008, Microsoft Office 2008, identifies the problem as a 'driver' issu and thus will not print the spreadsheets.
Info:
iMac, Mac OS9.1.x
View 2 Replies
View Related
Apr 1, 2012
I was having problems printing from my Canon LBP6000. Print jobs remained held in the queue. I uninstalled and reinstalled the Mac CAPT Ve r340 driver from Canon's website, no improvement. The printer works fine with my Windows laptop. I found an option to remove all printers from the Print preferences section. I can't remember how I did this, but all printers were removed. I reinstalled the above driver, but now in the 'print & scan' - 'add printer' section, I have no printer options. And no idea how to get printer options.
Info:
Mac mini, Mac OS X (10.7.3)
View 1 Replies
View Related
May 12, 2012
Printer won't print, printer queue won't open?
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.3)
View 8 Replies
View Related
Jun 25, 2012
my macbook pro wont connect to the printer properly. sometimes it connects and it prints for a few days but most of the time it wont work. it says that it is connected but when i try to print it says printer offline. how do i connect it to the prtiner permanently?
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7.4)
View 1 Replies
View Related
Sep 1, 2014
In Aperture, on the Info tab, in the drop down menu near the bottom, you can view comments from shared photo streams. I would like to print these comments. This comment field does not appear in the Exif or IPTC menus. Where is this field? Is it metadata? How can I print it?
Info:
MacBook Pro (15-inch Mid 2010), Mac OS X (10.7.5)
View 4 Replies
View Related
Jan 15, 2011
I've followed the instructions on the Apple website in relation to adding a Windows shared printer to a Mac [URL] but I still can't get it to work.
When I send a test page to the printer it appears in the Windows print queue and shows 'spooling' as the status. The document never prints.
I really don't know where to go from here, I'm just totally stumped and I've been trying for weeks to get this to work. Has anyone got any ideas?
View 2 Replies
View Related
Sep 1, 2014
Just wonder if shared Printer which is connected to Mac Pro(Mavericks10.9.4) can use from Windows 7(Home Premium) PC.
Info:
Mac Pro, OS X Mavericks (10.9.4), Late 2009
View 1 Replies
View Related
Apr 9, 2010
I have a network consisting of three Macs and a PC running Windows XP. One of my printers (a Canon Pixma MP830) is USB-connected to one of the Macs with sharing turned on. Thus, I am able to print to this device from any of the Macs. How can I access this shared printer from the Windows device? I can't determine an IP address because the printer doesn't have one.
View 3 Replies
View Related
Oct 11, 2010
I have my printer connected to a PC with Windows 7. I have 3 PC's that can print to it over my wireless network. But for some reason I can't get the MBP to print. I have tried many methods and they have all failed.
View 2 Replies
View Related
Jul 12, 2009
My printer is connected to my Mac Mini through the USB port and is shared with my MacBook Pro. I am on a large intranet and am worried about other people using my printer. Is it possible to password protect my shared printer?
View 2 Replies
View Related
Dec 25, 2009
I have already done this successfully with one PC laser printer using the built-in OS X System Preferences utilities. I have tried the CUPS method. I do not know what uname/pword combo it wants. There is only one account on this machine and no password. That combination is unacceptable to CUPS. Give me this info and I'll give CUPS another shot. Through the OS, when I get to the step of selecting the driver from the list, the driver is not listed even though. I just installed it with the original driver disk from the mfr. Is there a way to get the printer driver I installed to show up on the list of available drivers I am offered? My other printer was in the list, connected just fine, and I can print to it with no problems.
View 1 Replies
View Related
Jun 18, 2012
Before the 10.7.4 update, my HP Color LaserJet CM2320nf multi fucntion printer worked just fine with the built in OS X print drivers. I had the printer shared on the network via my iMac (2011) over USB and other devices could print to it via Bonjour.
As soon as the 10.7.4 update hit, printing has been an issue. Whenever a print job is sent to the printer over the network the printer displays a 'Please Insert Paper' warning that has to be cleared on the device itself before the print will continue, even though the printer is full of paper... This does not happen when printing from the iMac itself, only when using the iMac to share the printer.
10.7.4 seems to have been a really buggy update as it has caused problems with Wifi becoming unusable until the iMac is rebooted.
Info:
iMac, Mac OS X (10.7.4)
View 1 Replies
View Related
Nov 30, 2014
I have set up the shared printer on my iMac in my room. I am trying to print from my husbands iMac in the living room. It is acting like it is going to print but when I try to print the printer queue comes up and it pauses the print job. When I select resume it says "Printing- 1.6.2 is ready to print." then it pauses again.
I tried setting the printer up multiple times from the living room and when I do it says the address is "valid and complete host name or address" then when I'm done and click "Add" it tells me "Unable to verify the printer on your network." "Unable to connect to 'Mycomputer-name-example.local’ due to an error. Would you still like to create the printer?" cancel or continue.
Also I installed the printer software on both computers so that shouldn't be the issue.
Info:
iMac, OS X Yosemite (10.10.1), canon MP490 series printer
View 5 Replies
View Related
Nov 3, 2008
I have my Mac Pro connected to my hp c3100 printer. It is shared, all sharing options are enabled on the Mac Pro. 2 Macbooks and an iMac cannot find or see this printer. Networking, screensharing, file transfers, they all work fine. Just can't see the printer. Is AppleTalk required to do this? Here's some screenshots from the Mac Pro. I have never tried to network a printer in Leopard, I seem to remember it was easier in Tiger.
View 5 Replies
View Related
Nov 26, 2008
I need to install the Canon MP520 printer to my MBP. The printer is connected to another a PC running windows and is shared. I installed the OSX driver provided on the Canon page, I can see the printer in the network printers but when I am asked to choose the driver I can't see the correct model listed. On the other hand, if I simply connect the same printer via USB, to my MBP it is recognized directly. When I'm asked to provide the driver while adding the printer via the network, there is also the option to browse to the driver location. So my question is, where are the can I find the right driver on the OS?
View 3 Replies
View Related
Sep 17, 2009
Got a iMac running OS 10.6, and am wanting to print from a Samsung ML-1710P printer connected via serial port to a XP PC. Everything seems to all be communicating with each other, except I eventually get a print error on the XP machine in the print manager. Can anyone help with this?
Notes:
- the computer and printer can be seen by the mac.
- when a print job is sent, the mac spools and sends it "ok"
- the XP print manager status changes to "printing" then after about 1 min changes to an error.
- the latest driver for that printer is installed on the XP machine.
- I have tried to use the Generic Postscript Printer driver, the Generic PCL Laser Printer driver and an old Mac OS10.3 driver from the Mac end. There are no newer drivers available. I have shared this successfully printer before, but only from another windows machine.
View 2 Replies
View Related
May 6, 2012
How do I connect my windows shared printer to mac air os x lion .as soon i try to connect it asks me for password and id, which i never set up for the printer.
Info:
MacBook Air, Mac OS X (10.7.3)
View 1 Replies
View Related
May 14, 2012
I'm having trouble printing to a printer shared by my Mac Pro running 10.6.8 from my MacBook Pro running 10.6.8 Printer sharing is turned on on my Mac pro, they are connected to the same network, the MacBook via Airport and the Mac Pro via ethernet. I can quite happily swap files between them. When I try to add a printer on the MacBook the Canon iP4300 simply doesn't show up under the list of available printers as I think it should do.
Info:
Mac Pro, Mac OS X (10.6.8)
View 1 Replies
View Related
Jun 28, 2014
I have a HP OfficeJet 5610 printer connected via USB to my Windows XP computer, this printer is shared over our wireless network, I know this because my old laptop running Windows Vista could print to it, the Windows XP computer just had to be turned on. How do I add this printer to my mac?
View 2 Replies
View Related
Apr 18, 2009
I'm trying to get a Macmini (10.3) and/or MacBook Pro (10.5) to work with a HP PSC 750. On the Pro I get a "shared memory services not created" and on the mini I get "unable to communicate with HPAIO". Any idea what's going on?
View 1 Replies
View Related
