Hardware :: Installed 10.5.3 And Now My HP Laserjet P10006 Wont Print Anymore?
Jun 1, 2008
I just installed 10.5.3 and now my HP Laserjet P10006 wont print anymore...when I look at the print window the file loads but then after a few seconds its stops.
I've tried printing from Acrobat and preview to so avail. I installed the new 1.0.5 HP driver and still no luck.
The printer is connected and works as I've sent test prints through no problem.
So is this a 10.5.3 problem that has arisen or is it something on my side I am overlooking?
View 10 Replies
ADVERTISEMENT
Mar 1, 2010
I'm using a MacBook, Mac OS 10.5.8. I've downloaded the driver for HP LaserJet m1319f MFP and the printer worked fine when I connect it directly to my MacBook (using USB connection).The problem is that printer is supposed to be connected to our office network users through a TP-Link Print Server (TL-PS110U). I've tried to use AppleTalk to connect to that print server but my MacBook only recognized that HP printer as a HP Fax machine and I can't print anything.
View 6 Replies
View Related
Apr 25, 2009
laserjet 4mv won't print from indesign cs3
View 6 Replies
View Related
Jun 25, 2012
This past week I have had serious problems trying to get my Imac to print to a HP Laserjet 4100. Parallel port to USB.Driver version 18.4 THe Imac is less than a year old and runs on Lion. I have had intermittent problems ongoing but this time it keeps showing messages -Not connected.
Usually when I go into preferences and click hold, on and off a couple of time or delete document and try again it would work OK but this time I have deleted printer, reset printing system etc numerous times and it still does not print.Sometimes when I unplug and re-plug in the USB connection it does not even recognise the printer is plugged in.
I have tried connecting the printer to a completely different computer and it appeard to work ok so it does not seem to be the cable at fault. Does anyone have a similar problem and more important does anyone have a solution.
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.4)
View 3 Replies
View Related
Mar 23, 2012
I just upgraded to Lion and pdfs won't print. It doesn't appear to be the printer driver, because the printer works with others apps. It's an HP Laserjet 1300. Yes, it's old, but still works, well, sometimes. just not with pdfs.
Info:
iMac, iMac, OS 10.7.3
View 9 Replies
View Related
Apr 4, 2012
Upgraded my iMac to 10.6 Snow Leopard. Can't print to my hp LaserJet 1012. What is the fix?
Info:
iMac, Mac OS X (10.6.8)
View 1 Replies
View Related
Oct 8, 2005
I just got the HP LaserJet 1010 printer. I've installed it yesterday with the HP Foomatic/hpijs driver for CUPS from linuxprinting.org. I have it shared, so that I can use it from my Windows laptop - printing from my laptop works fine.
When I try to print from an application runing on my Mac Mini - nothing prints out, and the following can be found in /var/log/system.log
View 1 Replies
View Related
Apr 5, 2012
for any reason preview does not print to printers!Converting into pdf is not an issue, it works fine. But printing to printers does not work. No matter what type of file.And I do not know since when it is not printing.
Info:
Mac OS X (10.7.3)
View 6 Replies
View Related
Feb 15, 2012
This button allowed (in Snow Leopard and even in Tiger) to see the final page full size, or even to save as a PDF file. This functionality is sadly missing on my computer since I have upgraded to LION, making me regret the move. Is there some pref somewhere that I should adjust, or just plainly forget about it. ? When I print, the dialog window does NOT show the Preview button anymore.
I am on a MacBook Pro 17".
View 3 Replies
View Related
May 4, 2012
I upgraded to Lion and now can't print PDF files and Acrobat reader doesn't work anymore.
View 1 Replies
View Related
Nov 19, 2009
First, I'm a noob on MACs so forgive the nooby nature of the question.
I'm setting up a printer on a Macbook to use a printer shared from Windows 7. Followed the tutorials I found for the network side of things and that seems to be fine (Mac send unprintable files to the Windows print queue).
The problem is the print driver on the Mac. The printer is a HP PSC 1315. It's not on the list when you Select Drivers during printer setup and even after loading the HP 111 updated, still no joy.
I downloaded the 1315-specific driver package and ran the installation but I have no idea how to find the driver to use during printer setup.
View 5 Replies
View Related
May 18, 2012
I tried to add a local USB printer fro the W7 VM part. Installatioin work well, but the printer is not printing
View 3 Replies
View Related
Mar 25, 2012
I have a Mini Server, 10.7.3. 8GB, SSD 256, use it for FCPX mostly. Just moved all datafiles to external disks and re-installed Lion, but now I cannot access my user account. When I started up the system after it had installed, it asked me for company name and email address, but then I cannot access my user account any more.
Do I need to re-install the system again, or how can I solve this? I don't remember what email address I used originally when I got the server and registered it, whether it was my personal or the business address, which I gave this time.
I do remember the login name and password that I have always used, but these don't work anymore and I have too many jobs pending this week.
Info:
Mac mini, Mac OS X (10.7.3), Server 2.0Gz 8GB SSD256
View 2 Replies
View Related
Jun 28, 2014
I have recently upgraded from Snow Leopard to Mavericks and am now having problem with my hp 4500 office jet printer. The print icon tends to stay on the dock after the print job is done and then mess up the print queue. Even worse if I forget to cancel it manually then when I put the computer on 'sleep' the printer starts up again and the whole job is rerun unless I get to cancel it quickly on the printer!
It does not always do this (the print icon disappearing as it should do), but for 90% of the time it does.
View 3 Replies
View Related
Jan 1, 2011
Is there a way to force Safari to print what I see on a webpage, and not default to the print style? I'm trying to print a graphically-rich site and the print.css doesn't cut it, making everything look like trash (unformatted text, etc.).
View 1 Replies
View Related
May 21, 2012
When I print multiple checks they print in the wrong sequence. If I have checks 401, 402 and 403 in the printer in that order, they print 403, 402 and 401. How can I change this to print not collated?
Info:
Mac Pro, Mac OS X (10.7.4)
View 1 Replies
View Related
Nov 24, 2010
I'm trying to print an Excel 2004 .xls spreadsheet file where I'm using to record attendance for the class I teach.I have my main Column A with Rows A-X and it shows up fine, I imagine because there is content in the boxes.
But I also have Columns B-L and rows A-X with nothing in their cells, but when I print it, they won't print.I need these blank because I'll check them off if the child in the first column attended the lesson. How do I make it so my many blank cells will print as well?
View 3 Replies
View Related
Dec 6, 2010
I have had difficulty in attaching my HP Photosmart C5580 printer to my new MacBookPro (OSX 10.6) through my Netgear WGPS606 print server. After much searching I found previous posts here which advised me to add the Gutenprint driver 5.2.6 which I did. That finally DID successfully attach the printer through the server.
However, there is a lag of many seconds (sometimes minutes) between the SEND command and the starting of the printer. Is this the new normal that I need to expect or is there a fix?
View 1 Replies
View Related
Dec 27, 2010
I'm new to Mac OS X, but have been working with Linux for almost 9 yrs now. I have set up a Linux box with CUPS 1.3.9. I can print from the server, and from other Linux stations to that remote server. However, I can't print from a client MacBook.
I set up CUPS on the client Mac via http://localhost:631 and created a printer associated with the remote queue / printer on Linux (the URL I use on OS X is http://mylinuxserver:631/printers/hpprinter and the driver is RAW).
I have no problems sending a test page from the CUPS web interface on Mac OS X to the Linux server -- the test page gets printed OK. However, I can't see the printer I just defined from other Mac OS X apps, and neither can I see it from the Add Printer Dialog on System Preferences (it's empty).
I tried creating the printer at the Add Printer dialog, but it would neither let me specify an HTTP URL (as far as I know, I had to use the IP icon on the toolbar) nor specify "RAW". So I tried creating a "dummy" printer in the Add Printer dialog, with a basic config, and then changing it from the CUPS web GUI. This didn't work either, since when I went back to the Add Printer dialog, the printer was gone.
View 24 Replies
View Related
Feb 15, 2010
I'm new to Mac OS X, but have been working with Linux for almost 9 yrs now. I have set up a Linux box with CUPS 1.3.9. I can print from the server, and from other Linux stations to that remote server. However, I can't print from a client MacBook.
I set up CUPS on the client Mac via http://localhost:631 and created a printer associated with the remote queue / printer on Linux (the URL I use on OS X is http://mylinuxserver:631/printers/hpprinter and the driver is RAW).
I have no problems sending a test page from the CUPS web interface on Mac OS X to the Linux server -- the test page gets printed OK. However, I can't see the printer I just defined from other Mac OS X apps, and neither can I see it from the Add Printer Dialog on System Preferences (it's empty).
I tried creating the printer at the Add Printer dialog, but it would neither let me specify an HTTP URL (as far as I know, I had to use the IP icon on the toolbar) nor specify "RAW". So I tried creating a "dummy" printer in the Add Printer dialog, with a basic config, and then changing it from the CUPS web GUI. This didn't work either, since when I went back to the Add Printer dialog, the printer was gone.
View 8 Replies
View Related
Apr 12, 2012
The Excel program I'm trying to print Excel 2008, Microsoft Office 2008, identifies the problem as a 'driver' issu and thus will not print the spreadsheets.
Info:
iMac, Mac OS9.1.x
View 2 Replies
View Related
Dec 5, 2010
Installed a new 750GB drive into my MacBookPro 5.1 Couldn't get Winclone to make image so I was forced to start from scratch with a new XP installation.
My MBP is partitioned 25%Mac & 75%XP with bootcamp and I have the old drive in a enclosure connected with a firewire. So all of old files are on the external drive now.
After installing XP I have no internet connection, drivers etc... However if I boot up on the mac side everything works fine. (I cloned the mac os already with Carbon copy).
So can I just copy all my old drivers over to the new drive? If yes how and if no how do I get them installed on the new harddrive. The MBP came with everything preinstalled.
View 9 Replies
View Related
Jun 29, 2009
i'm trying to print some stuff off using adobe and some parts are printing, but some aren't. I've had this problem before i would print of some formula sheets for my finance class and basically if it wasn't a letter it wouldn't print it off but now it's taking out a lot more.
in the first picture you can see how i went through and wrote the stuff in, wasn't that big of a deal.
second picture is one page from the file that printed out fine
third picture, the entire top part is supposed to have a paragraph on it.
View 2 Replies
View Related
Mar 12, 2010
I have a HP LaserJet 1020, I would like to use it with my Macbook Pro, however, HP doesn't make a driver for the Mac. Anyone know of a good place to get a driver for this printer?
View 1 Replies
View Related
Nov 23, 2010
I have a 13' Macbook Pro running 10.6.5. I also have an HP Laserjet P1102 (works fine on my windows machine) connected via USB. Now I just need my Macbook to communicate with the damn thing. I downloaded a huge HP driver package from Apple's website, installed it (took up 700megs of space) but it still doesn't detect the printer when I go into System Preferences to ADD printer. Are there certain steps I have to do or recite some kind of voodoo incantation to get this to work?
View 1 Replies
View Related
Sep 15, 2006
I need quite a bit of help here. Can somebody post for me detailed instructions on how to properly install the drivers for the HP Laserjet 1020 on my Macbook, such that it will print out documents without glitches?
View 21 Replies
View Related
Dec 31, 2007
Has anybody installed an HP LaserJet 1000? I'm trying to do so onto an iMac, but not having any luck.
Been to the HP website and searched for drivers; they only show Windows drivers available for download. I downloaded some sort of generic program from HP, "HP LaserJet for Mac v5.5.2". It ran and installed some sort of stuff onto my Mac, and the Mac physically recognizes and identifies the LaserJet 1000 by name when I am in >System Preferences >Print and Fax > + ["add printers"], but the "Print Using" dialog box just reads "Please select a driver or printer model".
Auto Select does not work, and if I search through the list of built-in printers in Leopard (...>Print Using: >"Select a driver to use..."), a bunch of HP LaserJet models are listed, starting with the 1010 and incrementing upward. But no HP 1000.
Anybody successfully installed or using the HP LJ 1000?
View 11 Replies
View Related
Jul 1, 2012
How does one add an HP LaserJet 4000N to a TimeCapsule based network with systems running 10.7.4? I had it working fine with a PowerPC based iMac; however, although I have the correct driver and have the printer hardwired to the network, it does not appear on the network, e.g., you do not see it in the Add Printer lists.
View 1 Replies
View Related
Sep 21, 2009
I've found out the hard way that Snow Leopard does not support the same printers as Leopard did and now I'm stuck. I spent the better part of the day researching how to get my HP LaserJet 4m Plus to work with the new OS and got nowhere. Can anyone tell me what I can do to get the printer to work with the new OS? The printer may be old but it functions flawlessly and only has about 50,000 impressions made, so it still has lots of life. I have it hooked up via ethernet and the cable is run under the floor to the other side of the office so adapting a serial/USB would not be doable or practical. I don't have the money to blow on a new printer so I would really like to make this work somehow. Any help would be much appreciated.
View 2 Replies
View Related
Jan 27, 2007
I have problems using my new HP LaserJet 1018 printer together with a mac mini. After looking on the net I found the printer program: foo2zjs, but since I am new in the Darwin/Unix world I had problem with the installation.
View 7 Replies
View Related
