Bought a refurb from Apple and they don't send the install disk. Now can't get past the login screen. Thought I left the password blank but it won't let me get past the start up screen. Tried the install disk from my 15 inch mbp by holding C and starting up. but it only tells me I need to restart.
Info:
MacBook Pro, Mac OS X (10.7.3)
I Was having some trouble a few days ago with my computer running slow with basic tasks, would give me the rainbow spinner frequently. I have a feeling it might be because of some music I downloaded from a torrent website (?) so i decided to do a hard shut down a few days ago by holding the power button down and left it alone until today, where it asked me to log in and then had the pop up that said something like "your computer was shut down unexpectedly, would you like to open all the apps you had running" or something along those lines and I hit cancel instead of yes because i wanted the computer to start new with nothing open. Well after I hit cancel and logged in with my administrator password, it will not load my computer past the log in screen and just has me stuck on that screen with the rainbow spinner. Not sure what to do, I'm afraid of repeatedly doing hard shut downs. Not sure if I have a virus from the songs I downloaded but I don't think I'll be downloading anymore.
View 2 Replies View Relatedi upgraded my G4 Silver from 10.4.9 to 10.5. I never required myself to login on startup. After up grading to 10.5 the login screen comes up with the only account "Other". Stumped in what to do. I did repair permissions.
View 5 Replies View RelatedI recently tried to install OS X Yosemite. unfortunately during the install my laptop was unplugged and the installation failed mid way through. Each time I start my mac I get to login screen and after logging in get an error message and told to restart and try again - which does not resolve the issue. Guest login do work to the safari screen.
The error message reads: You need to restart your computer. Hold down the power button until it turns off, then Press the power button again.  Behind system code, including:Â
panic(CPU 2 caller 0xffffff 80005418bf):
"process 1 exec of /sbin/launchd failed, errno 45"@/sourcecache/xnu/xnu-1699.32.7/bsd/kern/kern_exec.c:3546
Debugger called: <panic>
Backtrace (CPU 2), Frame: Return Address
0Xffffff80e8423e00 : 0xffffff8000220792
7 more lInes like the one aboveÂ
BSD process name corresponding to current thread: initÂ
Info:
MacBook Pro (15-inch Late 2011)
I have a problem with my MacBook. Recently iphoto kept freezing whilst looking through pictures, then eventually crashed. Kept trying it over and over and it did the same thing. Then firefox started crashing too. Restarted my MacBook and I got to the log in page. Entered my password but it then froze on the blue screen. Tried booting in safe mode but it didn't get past that point either.
View 2 Replies View RelatedMy MacBook pro froze so I turned it off.Now when I turn it on it goes to the grey apple screen then stops at a plain blue screen with the mouse up but nothing else.
View 2 Replies View RelatedOkay well, to start off, I got my MacBook from a distant family member who got a new one so they let me have their old one. They got it from a pawn shop so I don't have the disk that we got the OS from but it hasn't had any issues UNTIL NOW. I need to use my laptop for a homework assignment. Everytime I turn it on it'll just stay on the loading screen, I left it for 4 hours yesterday and it still wouldn't work. I reset the (insert acronym here) thing already, the thing where you press control, option, P, R keys at start up. because my assignment is on the laptop and it's due tomorrow.
Info:
MacBook Pro
My Macbook Pro (2008) was upgraded to Lion 10.7.2 before I bought it used. It's always been slow and after a little while it won't boot up properly, it only gets as far as the apple logo with the spinning wheel underneath.
I've have used Recovery HD and Disk Utility to repair/verify the hard drive and after the repair it still won't boot up past the apple logo. I downloaded OSX Lion 10.7.4 (client combo) update onto an external drive but I can't install the update when using Recovery HD. I've tried mounting the existing hard drive onto an external drive, but I get an error mesage immediately.
There are only a few folders I need to take from the existing hard drive in the Macbook Pro. What can I do to either access my hard drive or get it to boot up properly? I have a retail copy of a Snow Leopard DVD that I can use. I believe I might have saved Lion onto a DVD a while ago, but Apple seems to insist we intall by downloading the latest Lion? Basically I need to access the hard drive without erasing the data.
Info:MacBookPro, Mac OS X (10.7.2)
I hardly ever turn off my Macbook unless i need to - I just close it and use it whenever i need to. I let the battery run dry as Apple suggests to do every now and again, and turned it on the next day. It started to boot and took a little longer to get past the grey apple logo and loading circle and then froze on the blue screen. I can control the mouse, but every few seconds it changes to a darker blue, cursor disappears but returns after a second or two. I've tried:
- Booting into safe mode (Same thing happens)
- Booting from CD and repairing permissions (Said everything was ok, same thing happens when I booted)
- Single user mode (used some commands from an Apple page and restarted)
I can however boot into windows perfectly fine, which leads me to suspect it's a corrupt log in item. I'd like to know for sure it's not a hardware problem so I don't have to take it into an Apple Store.
first i'd like to give you a few pieces of information on what was going on before I restarted my mac. 1. My mac is a 13'' late 2008 mb with 2gb of ram (running leopard). 2. I JUST had my hard drive replaced due to a failure. 3. Before i restarted my computer i was having several "system extenstion" errors and when i tried to repair i recieved the message 'Underlying task reported failure on exit.' At the time, i was also trying to install Adobe CS5 Master Collection trial and i couldn't get past a password screen. This also prompted me to restart. Once the computer began to restart, it began updating boot caches. This was taking a very long time so i walked away from the mb. When i came back i realized the battery had died and when i plugged it back in and tried to get it to boot, it would get to the gray screen with the apple and the spinning logo underneath. But then it simply reboots.
I've tried restarting the pram. I've tried rebooting in single user mode (cmd + S) and got to the point where i could rebuild the tree (fsck_hfs -r /dev/disk0s2) and that did it's thing for about ten minutes and it didn't fix the problem. I don't have my install disk but apple is sending me a new one and will be here by friday.
My computer wouldn't quit an application, so to shut it down I Pressed the power button until it turned off. I've tried To turn it on with cmd-v and it said <5% free audit space.I tried rebooting with cmd-s and it still hasn't worked.
Info:MacBookPro
I have been using lots of software - indesign, photoshop, illustrator as well as other programs at the same time and my laptop started to slow down. I then tried to force quite pages and it wouldn't work so I had to force shut down. It then would not turn fully on and was on the grey screen for a long period of time. It eventually came back to homepage after about 30 minutes but did not fully load. It now wont go past grey screen and has a bar at the bottom.
Info:
MacBook Pro, Mac OS X (10.7.2)
My wife has a Macbook with an Intel Core 2 Duo processor (Macbook4,1). I am trying to replace the original SATA hard disk (160 GB) with an SSD. I have two SSDs here with me:Â
1) Intel 320 series, 160 GB
2) Crucial M4, 128 GBÂ
In both cases, after replacing the hard disk with the SSD, I am unable to get the Macbook to get any further than the "Mac sound" and grey screen.Â
In my first attempt, I cloned the original disk to the SSD on another computer, verified the data got on there OK, and installed the SSD into the Macbook. In subsequent attempts, I just formatted the SSD to see if the Mac would recognize it at all.Â
When the original hard disk is installed, and my Snow Leopard install DVD is in the DVD drive, during the boot, I can hold down the option key and get a boot choice of booting from the hard disk or the DVD. With either SSD installed, when holding down the option key I get no choices at all, it just sits there (it does access the DVD for a few seconds but then nothing).Â
I have another 160 GB "regular" hard disk here as well and when I install that I also get the choice to boot from the hard disk or the DVD (although booting from the hard disk does not work since it's a hard disk from a PC).Â
combination of Macbook and SSD, installing into the hard drive bay? I've seen many posts from people who have had success putting an SSD into their Macbook so I am assuiming it's possible.Â
Some more information about the Macbook:
Boot ROM Version: MB41.00C1.B00
SMC Version: 1.31f1Â
Info:
MacBook, Mac OS X (10.6.8)
I purchased my Macbook in 2008, roughly July.
My fiance unknowingly shut down my macbook in the middle of start up. Before that it was running perfectly fine, I had no issues. After my fiance stopped the start up, the macbook won't turn on. It'll load up to the grey loading screen (example here)... It doesn't make much noise as it starts up either. I have all original discs that came with the macbook, if that helps any.Â
Info:
MacBook
I was having trouble submitting an assignment on the American Military University website. After I finally submitted and verified my submission was successful, Finder popped open a window, without being prompted, with a specific part of my "private" folder showing. In the info window it showed that I had read only privleges, but that a user named "wheel" had permissions. Thing is, there is no such user. I am the sole user, and that is not my user name. I panicked, thinking I was being hacked, and moved the entire "private" folder to the trash. It was over 5 gigs. I had to input my admin password after dropping the folder in the trash. Then, my system froze. Now I can't get past the grey boot screen with apple logo and spinning wheel.
I've tried zapping PRAM. I ran disk utility from both the install disk and the startup disk for live verify. NO errors found. Still won't boot. I tried safe mode, and got a status bar below the apple logo but it vanished before filling completely and then the MacBook just continued to hang there spinning the wheel without a status bar. Tried rebooting while holding shift-command-v and got to watch as the computer tried to boot in safe mode, but I got the following messages before the darn thing just began to hang there again:Â
getaddrlinfo(): node name nor username provided, or not known
getaddrlinfo(): node name nor username provided, or not known
getaddrlinfo(): node name nor username provided, or not known
getaddrlinfo(): node name nor username provided, or not known
launch_msg(): Socket is not connected
launch_msg(): Socket is not connectedÂ
Info:
MacBook Pro 13.3", Mac OS X (10.6.6)
Today I was using my MacBook 2008 aluminum, and I ran out of battery so the system shut down the computer to save the files. I plugged in my computer to start it up but the screen turned grey for a while. I shut down my computer and turned it on and it started up to the grey login screen but it won't let me boot passed it. I have tried to get passed it in safemode but it did not work. I have tried to repair my hard drive and my permissions and reinstall osx lion but it didnt work.
Info:
MacBook, Mac OS X (10.1.x)
I sure hope your day is faring better than mine...To try and make my new issue easier to follow and to save face as I feel like an idiot, permit me to explain in bullet format:
First things first: I was running 10.6.8 SL on my 2006/7 model MacBook pro 15.4 w 2 gig sdram, right now I'm running nothing. When I turn on Mac it goes to grey screen and I see a folder/?/apple symbols rapidly interchanging on screen. This occurred after trying to use TM for my first time as I deleted some items I shouldn't have. In time machine all seemed kosher until the first attempt said not enough space on hd so I decided to only click on sys folder in TM. this was where prefs and files were accidentally deleted from after all. The kicker is my Mac still functioned I just noticed my HD no longer had a name, and a few other issues were happening, but I could access and open files, go online, etc... Post time machine none of that was possible! I tried first putting SL disk in but wouldn't read it, so tried restarting w disk in drive. HUGE ERROR on my part. This is where the grey screen desc above took its place. I looked on iPhone and have followed all available suggestions but have come to realize at some point I must have in error created a firmware Pw. I tried entering it but the lock simply stays put (when I attempted one of many fixes to my problem listed online). So now I'm left not knowing if whatever happened messed w my firmware pw or if I somehow chose something diff as pw but I highly doubt that. In any case, I have all of my life locked into a useless box now and I had thought this is why I bought external and used time machine. I've come to loathe TM. it's not as simple as I had thought otherwise none of this dshould have occurred. Does anyone have any ideas as to how I reset or altogether delete firmware pw, and best way to reinstall.
Info:MacBookPro, Mac OS X (10.6.8), 2.16 GHz Intel Core 2 Duo 2 GB 667 MHz DDR2 SDRAM
Went to turn on my Mac book pro 2011 or 2012 and it went to the grey loading screen with an apple, spinning gear and a loading bar. Once the loading bar completes my Mac book just turns off. It just keeps doing this, I tried to do a safe boot, but once it was done that it turned off and continues to do this circle of grey screen loading than turning off.
Info:
MacBook Pro
So bare with me I want to be thorough so hopefully someone can help me out. My MBP (08) will not boot past the grey screen. The wheel just spins infinitely. I've read about it trying to figure it out.
1) I tried to boot from the install disc, when I do there are weird diagonal lines and the thing is unreadable.
2) I hooked it to my Mac Pro in target disc mode. I was able to get some of the information off, but it would eventually freeze up and freeze the finder on the Pro. It wouldn't verify the disc in disc utility. It would freeze if I tried to repair the disc.
3) It won't boot in safe mode or single user mode (CMD + S)
4) I tried removing the ram and switching it and using only one stick of ram (to make sure it wasn't a ram problem).
5) I tried to boot without the battery
Needless to say I am a bit frustrated. My applecare is long gone and there is no apple certified repair place anywhere near here. I've also noticed the thing is very hot. If nothing else I'd like to have an idea of what I should be expecting from the repair place.
MacBook pro wont boot up. I followed steps posted on other threads:Â
1) command r
2) repaired hard disc (there were 3 errors, now all fixed)Â if I try to restart, computer still doesn't boot past the grey screen. Â
Info:
MacBook Pro, Mac OS X (10.7.3)
MacBook Pro powers up but never gets past Apple icon screen.
Info:
MacBook Pro (15-inch Early 2011)
I had been using my MBP running Snow Leopard to play movies and music through a TV/stereo and brought it with me when I moved to do the same, but now it won't start it. I kept it asleep as I brought it on the plane, then when I got to my new apartment, it was frozen. I shut it down, then tried to turn it back on but it get stuck in the grey loading screen with the Apple logo.Â
I've tried starting in safe mode (it will bring up the safe mode loading bar, then that disappears and it gets stuck on the normal gray loading screen).I've also tried resetting the SMC and NVRAM.Â
Then, I tried to start it up from a friend's OS X install disk (but it came with his MacBook from the same era, so idk if it only works for MB and not MBP), but that doesn't work either (selected it as the startup disk by holding Option when booting up, then selecting it. It then goes to what it does normally except it will turn itself off instead of gettting stuck.)Â
I don't know what else to do. I'm assuming something is seriously broken. I'm hoping it might just need a reinstall or maybe a new hard drive, which I could do if it's not too expensive.Â
Info:MacBook Pro (15-inch 2.4/2.2 GHz), Mac OS X (10.6)
My MacBook pro starts up then goes to the white apple screen but after that the whole screen turns blue and has a round loading thing that does not stop spinning and thats all it does. The computer does not turn on past the blue screen?
Info:
MacBook Pro
My Mac book pro will not boot past the whit apple screen.
Info:MacBookPro, iOS 5.0.1
I am having a major problem with my MacBook Pro and it just wont boot past the apple loading screen at all I have tryed al lot of ways to fix this and it just wont work It does not go into safe mode, it does not boot from cd, the PRAM thing wont work, verbose mode or the comand + s mode wont work I tryed clean install but it wont boot from dvd, also it will not boot in any other way It was working perfectly last night and i just shut it down and it does not work know. Â
My friend was also trying to install Lion from his account but the .dmg for it did not open so we quit and that night i used it for my essay and finished and then i turned it off and next day in the morning it don't workÂ
Info:
MacBook Pro, Mac OS X (10.6.8)
what should I try? I did try restting the eprom by removing he battery and hoding the power button for 30 seconds.
View 1 Replies View RelatedTried everything, the shift key at startup, the c key at start up, with the disk installed, disk is brand new no scratches. Gray Screen still on, no movement of the optical drive or HD apparent Is my HD screwed ?
Info:MacBook Pro (17-inch Early 2011), Mac OS X (10.6.8)
How to get my computer to turn on? I used it on Friday and had a normal shut down but when I went to turn it on yesterday, it gets the the gray screen with the apple and the loading bar and loads half way and then just stops and sits there until it eventually shuts itself off. I have tried turning it off and then back on and holding the D key but nothing happened.
Info:
MacBook Pro, iOS 8
One minute my computer was fine, the next it froze. I did a hard reboot and now it won't boot past the blue screen, but I can move my mouse. Any idea what to do?
View 8 Replies View RelatedI apologize for the long message but I want to be as detailed as possible. My MacBook (purchased early 2006, white 13", upgraded to Leopard about a year ago with no problems until now) will not boot past the grey screen and spinning wheel. Here' are the list of 6 steps I've followed so far and still is not working. Oh, and I do not have any peripherals attached to my MacBook:
1. Reboot in Safe Mode: tried pressing down the Shift key before the powering up sound AND after the sound. Could not get into Safe Mode. Did this several times, holding the Shift key for as much as a minute or two. Nothing but grey screen and spinning wheel.
2. Reset NVRAM/PRAM: CMD+R+P+Option: Computer restarted but still goes into Grey Screen, spinning wheel and stays there forever.
3. CMD +S: I read this online. Gave me a black screen with a lot of information, but I don't know how to read the computer jargon, let alone know what to do with said info. 4. Disk Utility Repair Disk : Inserted my Leopard install disk. Went to Utility Disk. Performed a Repair Disk and I did get two error messages, something related to id 70000452 should be id 70000450 ( I'm sorry to say I cannot remember the exact error messages). But it showed as repaired. When I did a 2nd Repair Disk, I got the message that the volume appears to be OK. Turned off and on again, nothing but grey screen and wheel.......
