first i'd like to give you a few pieces of information on what was going on before I restarted my mac. 1. My mac is a 13'' late 2008 mb with 2gb of ram (running leopard). 2. I JUST had my hard drive replaced due to a failure. 3. Before i restarted my computer i was having several "system extenstion" errors and when i tried to repair i recieved the message 'Underlying task reported failure on exit.' At the time, i was also trying to install Adobe CS5 Master Collection trial and i couldn't get past a password screen. This also prompted me to restart. Once the computer began to restart, it began updating boot caches. This was taking a very long time so i walked away from the mb. When i came back i realized the battery had died and when i plugged it back in and tried to get it to boot, it would get to the gray screen with the apple and the spinning logo underneath. But then it simply reboots.
I've tried restarting the pram. I've tried rebooting in single user mode (cmd + S) and got to the point where i could rebuild the tree (fsck_hfs -r /dev/disk0s2) and that did it's thing for about ten minutes and it didn't fix the problem. I don't have my install disk but apple is sending me a new one and will be here by friday.
Tried everything, the shift key at startup, the c key at start up, with the disk installed, disk is brand new no scratches. Gray Screen still on, no movement of the optical drive or HD apparent Is my HD screwed ?
Info:MacBook Pro (17-inch Early 2011), Mac OS X (10.6.8)
My Macbook Pro is not starting past the grey screen and the apple logo and the rolling circle. I have tried every method and I am desperate to do anything to start my computer even erase the entire disc. I have contacted the Apple store and they told me the cost will be equivalent to $600 to just repair it and no way I will be able to afford it.†I am willing to do anything and even erase my entire disc. However, for that the instructions on the Apple page state that 'Insert your Mac OS X 10.4 or 10.5 installation disc'. However, I do not have my installation disc Is there any other way I can erase the OS system and at least reboot my Macbook?
So bare with me I want to be thorough so hopefully someone can help me out. My MBP (08) will not boot past the grey screen. The wheel just spins infinitely. I've read about it trying to figure it out.
1) I tried to boot from the install disc, when I do there are weird diagonal lines and the thing is unreadable. 2) I hooked it to my Mac Pro in target disc mode. I was able to get some of the information off, but it would eventually freeze up and freeze the finder on the Pro. It wouldn't verify the disc in disc utility. It would freeze if I tried to repair the disc. 3) It won't boot in safe mode or single user mode (CMD + S) 4) I tried removing the ram and switching it and using only one stick of ram (to make sure it wasn't a ram problem). 5) I tried to boot without the battery
Needless to say I am a bit frustrated. My applecare is long gone and there is no apple certified repair place anywhere near here. I've also noticed the thing is very hot. If nothing else I'd like to have an idea of what I should be expecting from the repair place.
How to get my computer to turn on? I used it on Friday and had a normal shut down but when I went to turn it on yesterday, it gets the the gray screen with the apple and the loading bar and loads half way and then just stops and sits there until it eventually shuts itself off. I have tried turning it off and then back on and holding the D key but nothing happened.
I apologize for the long message but I want to be as detailed as possible. My MacBook (purchased early 2006, white 13", upgraded to Leopard about a year ago with no problems until now) will not boot past the grey screen and spinning wheel. Here' are the list of 6 steps I've followed so far and still is not working. Oh, and I do not have any peripherals attached to my MacBook:
1. Reboot in Safe Mode: tried pressing down the Shift key before the powering up sound AND after the sound. Could not get into Safe Mode. Did this several times, holding the Shift key for as much as a minute or two. Nothing but grey screen and spinning wheel.
2. Reset NVRAM/PRAM: CMD+R+P+Option: Computer restarted but still goes into Grey Screen, spinning wheel and stays there forever.
3. CMD +S: I read this online. Gave me a black screen with a lot of information, but I don't know how to read the computer jargon, let alone know what to do with said info. 4. Disk Utility Repair Disk : Inserted my Leopard install disk. Went to Utility Disk. Performed a Repair Disk and I did get two error messages, something related to id 70000452 should be id 70000450 ( I'm sorry to say I cannot remember the exact error messages). But it showed as repaired. When I did a 2nd Repair Disk, I got the message that the volume appears to be OK. Turned off and on again, nothing but grey screen and wheel.......
My macbook suddenly won't progress past the grey screen and the spinning gear. I have tried the procedures listed in one of the support documents, although I note they don't include OSX10.7 which I am running. I got to the part where it says try your system disk, problem is, I purchased through App store.†I'm guessing at this stage I should have created an emergency boot disk.
My macbook pro won't boot past the grey screen, I've tried reseting PRam, running fsck from single user etc to no avail. All signs would point towards a hard disk failure, but the curious thing is that it sometimes mounts in disk utility when booting from the install CD, so theres a little life left in it yet! I have fairly recent backups of most of my files, but there are a couple I've been working on in the past few days that won't be backed up. So my question is this - is it possible to copy files from my mac HD onto a external drive through the terminal/disk utility while booting from the CD.
This morning, I would turn it on and it'd go to the grey screen with the Apple logo for a few seconds and then go to the icon that is a circle with a line through it. After reading online, I was able to boot it up in Safe Mode. I went to Startup Disk in Preferences. I chose the MAC OS X, xxxx and then clicked the lock to prevent further changes and then clicked restart. Now when I turn on the macbook, it goes to the grey screen with the Apple logo for at least two-three minutes and then just shuts off. Won't boot into Safe Mode now. I already tried the Command-Option-P-R keys trick like five times.
last night i changed the permissions on my macbook to stop my files being shared. now when i log in i cant get past the grey boot up screen. i was told its because of problems created from changing the permissions. i booted up holding shift and nothing happened i booted up in in verbose and it says theres no posix_spawnp("/usr/sbin/mDNSresponder", ...) over and over i booted up with cmd+s and got If you want to make modifications to the files
/sbin/fsck -fy /sbin/mount -uw
If you wish to boot system exit. I dont want what to do here, Im afraid to start messing with it. I really need to get the files in my HD, I'm doing finals right now!!
I have a mirror door g4 power pc that had been having some issues with not turning on, and after testing the power supply, it failed miserably. We placed a refurbished power supply in it from a company in New York and the computer was working wonderfully. I went on a cruise last week and went to turn the computer on for the first time in a week and a few days. The CPU turns on, the unit chimes, the fan turns on and the computer starts to boot up, but it won't boot past the gray apple logo screen.¬†Actually, the first few attempts to boot it resulted in a blue screen with gaint apple logo and spinner; it wouldn't advance further. After several restarts and resets, I got it to come up into the normal gray screen. On several attempts it wouldn't boot further than this. On two occasions now though, it has moved past the gray screen to normal operation (it takes about an hour for it to get to that point though) but with some kind of errors. I get the side bar, but the gray panel on to with "file" ect is gone and my HD icon never comes up. The icons on the sidebar do not respond when clicked.¬†The computer will not boot from the OS X disc.¬†
I'm trying to resurrect an iBook (translucent white case, 14.1 LCD) that was long neglected, so not sure on its past service history. The following do NOT work: - won't boot up past the gray screen with Apple logo and spinning gear icon (just hangs) - same problem if I try to boot from install DVD ("c" or using "option" then selecting DVD) - same problem with safe boot with "shift" - reset PRAM It will connect via firewire target disk mode to another computer, and I used that to completely wipe the disk and do a clean install of 10.5. When I tried booting into single-user mode (cmd-s), it fills about 2/3 of the screen with normal-looking messages, but then hangs after this (no keyboard response): Got boot device = IOService... [various other stuff] BSD root: disk0s6, major 14, minor 5 I'm out of ideas. Any suggestions? The machine is old enough that it's probably not worth the diagnostic fee of the local Apple shop. Since I can't get it to boot, I can't even run TechTools.
At the tech dept we have this G4 that refuses to boot past the grey screen with the rotating wheel. The logic board has been replaced, we've removed all sticks of RAM save 1x512, we've tried a known working optical drive, replaced ribbon cables (optical cable was frayed on one end) No dice. Option booting works, but once we select the DVD we can't boot from an install PPC CD either, it just gets stuck at the grey screen. We also have a tech HD inside that the computer does not boot from either.
I recently required a Power Mac G4, and it was working fine, albeit a bit slow but I just assume that was because there's too many files on it, but that's another story. I shut it down before I left work, when I came back in the morning it was just the grey screen with the apple. I reset it, still no response. I reset the PRAM, nothing. I tried to boot in Single user mode, nothing. I tried to boot in verbose mode, nothing. I force ejected the CD and put in an OSX disk one from my laptop, asked it to force read by restarting and pressing "C" and still nothing. I am not sure if a cable inside has been jarred lose.
I was given a PowerBook G4 15" today. I need to fix it, but I can't find out what exactly is wrong. I've used MROOGLE and I can't find any problem quite like what I'm experiencing. In my case, the laptop will turn on, make the chime, and stay stuck on a white/grey screen. No apple, no spinning gear, no nothing. Just a blank white/grey screen. However, when I insert the Leopard DVD and hold down "C" the apple appears as well as the little spinning gear. That goes on for a few minutes. BUT, after those few minutes are up the small gear still spins, but the Apple logo is replaced with a prohibitory sign (like what you would see on a non-smoking or no parking sign) and it sticks there and sometime says that I need to re-start my computer. The same happens with the Tiger disk. Also, when I place the Leopard or Tiger disk in the SuperDrive and hold down "option" so that I can boot OS X from the DVD, I click the little continue arrow and nothing happens. I've reset everything there is to be reset, and I've opened up the computer and re-seated everything that could possibly be re-seated. RAM, HDD, all connector cables, etc. There isn't any visible physical damage inside of the computer either.
The most recent thing I've tried was to boot off of a PPC-specific Ubuntu disk. It does some stuff and lets me run the kernel, but after that the computer gets stuck on a black screen and does nothing at all. I'd really appreciate it if you all could offer some advice as to what may be wrong. All suggestions and ideas are welcome too.
I have a few month old iMac 27" i7 quad core for music use and did an update this morning which consisted of an itunes update and update to the screen firmware and two other things I can't remember. Do the usual install and restart business and am now met with the following error:
------------------------------------------------------ panic(cpu 0 caller 0x558271): "Unable to find device driver for this platform: "ACPI". "@/SourceCache/xnu/xnu-1504.3.12...................... Debugger called: <panic> Backtrace (CPU 0) , Frame: Return Address (4 potential args on stack) 7 lines of numbers and letters (please let me know if you need these) BSD process name correspoding to current thread: Unknown Mac OS Version: Not yet set Kernal Version: Darwin Kernel Version 10.3.0...............
I started this topic on the Garage Band forum because I was having trouble with Garage Band '08 when my computer crashed and will not restart afterwards. Garage Band was crashing 2 out of every 3 attempts at recording, and I would have to use Force Quit to escape and start over. Then, while I was in the middle of a very complex project involving Garage Band, iTunes, Finale (music notation program), and Microsoft Word, the computer froze up and I hit restart, thinking that would solve the problem. Big mistake - the computer has not been able to restart since then. I have a late 2005 G5 power mac with 1 GB of memory, 230 GB hard drive (or something like that) and no additional gizmos installed, running OS X 10.4.4. I had upgraded to iLife '08 a month or so ago and have had problems since with unusual crashes and freezes, especially involving Garage Band '08.
When I boot, I get to the gray opening screen with the gray apple logo and the spinning gear (is it really called an "intergalactic frisbee?"), and no further. The fans come on (and begin to ramp up to a huge noise after two minutes or so), the white LED light comes on steadily. I've disconnected all peripherals except my keyboard and mouse (Kensington USB keyboard and Logitech Mouse, both of which seem to work OK still). I can use the keyboard to open the CD/DVD player, and I can start the computer with both the Apple Installer disk and with Disk Warrior 4.0. I've repaired everything I can find with both programs, verified everything available, used Disk Warrior to examine corrupted files, and removed all the .plist files that it said were broken and could not be fixed. The only thing I can't find is that it says I am missing a "tmp" folder in my HD/private/ folder, which I can't seem to locate on the directory on Disk Warrior. Both programs say that all my hardware is fine, and that everything else is OK too. Puzzling. I removed the battery and tested it (it was OK), replaced it, and reset the PMU button on the motherboard even though I know all you have to do is unplug the back for a few minutes or so.............
My iMac won't get past grey screen, I've tried holding down c. I've tried holding cmd+s. I've reset my PRAM etc, I've put back in RAM it came with, and when I turn it on I just get grey screen, apple logo and the spinning thing! Updated it to new snow leopard OSX 10.6.6 and it has a DVD in the drive and I can't even get that out! What can I do?
My fiance unknowingly shut down my macbook in the middle of start up. Before that it was running perfectly fine, I had no issues. After my fiance stopped the start up, the macbook won't turn on. It'll load up to the grey loading screen (example here)... It doesn't make much noise as it starts up either. I have all original discs that came with the macbook, if that helps any.¬†
Went to turn on my Mac book pro 2011 or 2012 and it went to the grey loading screen with an apple, spinning gear and a loading bar. Once the loading bar completes my Mac book just turns off.¬† It just keeps doing this, I tried to do a safe boot, but once it was done that it turned off and continues to do this circle of grey screen loading than turning off.
I was browsing with safari reading email from my msn account when safari failed to load the page. I then decided to do a force quit. Usually, when I hit command option escape, it will show me the programs then show which program was not responding, this time, it did not say that Safari wasnt responding. After waiting for at least a couple of minutes, I decided to restart the Mac by pressing on the power button to shut down. When I powered up after a minute, the gray screen with the apple in the center appeared and the cursor was forever spinning. After waiting, I decided to shut down again and then tried to zap the PRAM. This did not work so I shut down again and tried to reset the SMC.
I bought a used MBP (early 2011) with OS X 10.6.8. It's been running just fine, but last night moving files the screen suddenly went black. I rebooted and it will come up to a gray screen and then sit there. The fans start revving up and it gets really really hot. Of course I haven't done a backup recently, so I need the information on the computer.
Allright so my girlfriend accidentally spilled a drink on her macbook the other day. We thought we had cleaned it off and everything was fine. We were mistaken. During normal usage the computer crashed so we restarted it and are now greeted upon startup with a gray screen and a gray application folder with a question mark on it flashing repeatedly. What is the course of action guys? I'm not computer whiz and I'm wondering if we can fix this ourselves without having to take it in for repair. And FYI she does not have apple care
my mom's Macbook Pro can't start up.¬† it gets stuck at the grey screen w/ the Apple logo and spinning pinwheel every time.¬† nothing else is plugged into the laptop aside from the power cord. ¬†
here's what i tried already, but to no avail:
¬† - Reset SMC
¬† - Reset PRAM
¬† - Hold shift while starting up... nothing happens.¬† So can't start in safe mode
¬† - Used install disk to run Disk Utility diagnostic: Ran into a bunch of Disk Permission errors and fixed those.¬† Nothing wrong on the Disk itself.
¬† - Held Command-S while starting up and typed "fsck -fy".¬† Got "File system was modified" at first.¬† Ran it again and got clean bill of health there
¬† - Held "d" while booting, ran the hardware test and it checked out fine.¬†
after all of the above, tried waiting for it to restart for 15 minutes and still same spinning wheel.¬† ¬†
this all started when a Skype update couldn't install, so i got rid of the current Skype.¬† then tried downloading the new Skype. after it supposedly downloaded fully and it was automatically processing in the download pop up window (e.g. something about "writing", "image", etc.), it got stuck and froze the computer for at least 5 minutes.¬† at that point, i help the power button until it turned out.¬† then this started..
PS: not sure if this has anything to do w/ the problem, but after this happened, i tried to use Disk Utilities to make an image onto an external hard drive and it gave me an "operation timed out" error.¬†
PPS:¬† she has the following specs -
Hitachi Hard drive; partition Map Scheme: GUID Partition Table
After booting in safe mode, my MacBook Pro doesn't load the desktop/applications properly. Whenever I enter the password it asks me for the password again. Series of events: I connected external drives for the first time in Apple Bootcamp/Windows. They did not mount and Windows froze whenever I connected the drives. I tried it a few times, each time using the power button for turning the computer off. After a couple of trials the screen color was very weird (psychedelic) and I noticed that the computer had gotten hot (in Windows my fans don't work as they should) and I restarted the in OSX 10.4. The psychedelic colors were still present and the temperature reading was 71 degrees (smc control software). Searching forums in a panic that I might have fried my video card partially I found and followed a description on how to change the screen from "color" to "grey" under System Preferences>Universal access. This did not help as the psychedelic color/pixelness still persisted. Even worse, when I restarted the computer, the above mentioned problem occured (not getting the proper desktop, I can't run any application or shut the computer down, it always tries to reload the desktop after a couple of seconds). What I tried so far: -I resetted the PRAM using the Command, Option, P, and R keys and waiting for two additional startup sounds. Result: the psychedelic color is gone, it looks normal. But still cycles between grey and color during the desktop stall.-I repaired my startup disk with the OSX installation disk...no repairs were necessary -I repaired permissions with the installation disk...lots of repairs were made, but no success upon reboot -I started the computer in safe mode...result: I don't get past the password screen. As soon as I enter the password it asks me for it again.
Last week or so my Mac (10.3 or 10.4, I think, was the model.) froze up while I was surfing the web. I clicked all over the place, let it sit for fifteen minutes, and came back to find nothing had changed. After shutting it off with that little button on the tower you're not supposed to use to shut it off (but it was frozen, so..) and leaving it to sit for another five or six minutes, I came back and turned it on. That's where I had issues. It only boots up to that gray screen with the Apple logo and the spinning wheel that means it's loading (lies. It never does. I thought it might just be slow so i left it like that for an hour; came back, still there.), and then it just stays there.
Now, I looked on the web for some suggestions and tried the stuff here: [URL] and went some other places that told me I needed some system CD that I don't have. Also, I looked on here and found someone with a similar problem (computer froze, turned it off, turned it on, got stuck on screen with apple and spinning wheel), and they told them to try something with the CD. They didn't have one either, and no one really commented after that. Does that mean I'm seriously up a creek with fixing my computer? I've left it unplugged for a few days at a time, too, just in case it needed some serious cooling down time, but nothing happened then, either. I'm not very computer savvy, but my Mac's future looks pretty bleak.