- i've tried to scour through the apple site but as a tech dope i don't know what the terminology is.
Just wanted to ask if there is a brightness/resolution/clarity difference between these two model?
I've been wearing contacts all my life in order to get 20/20 vision. And until last week I always had to have my brightness on the highest setting while I was at the office with fairly bright overhead lighting. While using the computer at home with the lights off/dim, I still had to have the brightness set to 4 bars shy of the brightest setting in order to see everything properly. And I never understood when I would see people on here saying they had their brightness set to the lowest settings and it was plenty bright for them to see. Last friday I had LASIK done.
And since the surgery I now have 20/15 vision in both eyes, which was expected. But one thing I did not expect was the difference in brightness. Now in the same office setting I have the brightness set to 40-50% brightness and it's still almost to bright. And at home I set the brightness level to 1 bar and it's more than enough to see every detail on the screen. In fact, I now wish there was a lower brightness setting than the lowest bar. The best part is that, while running on battery, I can now get another 30-40 minutes out of usage with the brightness set so much lower. Now if I could just figure out how to get my volume to not jump to 70% when I plug my headphones in I would be very pleased.
The brightness goes up when you plug in your MBA, but then over time it just goes up and up. I honestly like my brightness pretty low (rarely more than half, typically at 3-5 notches), but it just keeps on going up and up. I almost never set it above half, but multiple times a day, I notice that it looks pretty high and it's at like 3/4 so I put it it down to about 1/3, but after a while, it's just up again.
Anyone else notice this? What is it, why does it do this? How can I fix it? I don't mind not having auto-brightness (even though I loved it), as long as my screen doesn't keep going up.
1440x900 resolution of the new MacBook Air 13.3" screen is simply too high, making everything way too small and straining on my eyes. Is there a replacement LED LCD panel with a lower resolution (1280x800 like the old MBA) that could be retrofitted?
View 24 Replies View RelatedIt is clear there are people who love their high-res antiglare display; the ability to have more pallets open in Photoshop, see more of what you are doing in Logic. However, there is a fair few of us who dislike the high-res because of decreased fonts, smaller graphical interface things.if you had the choice to go for a high-res or normal res antiglare 15", what would you go for?
View 13 Replies View Relatedi am using a hackintosh for a week now. I am using it just to get used to Mac OS X because i am switching to a Macbook Pro in a couple months. I switched from PC to Mac officially now. OK, let's come to the main topic of this thread;-At first, my hackintosh couldn't get my gfx card, i couldn't find the driver(kext) so my resolution was very bad. Everything was huge and blurry. I couldn't even look at my 17" Samsung LCD screen. I made an entry to file which was something like this
View 14 Replies View RelatedWho has actually played games on BOTH the 2010 high res and standard res macbook pros?Reading through that gaming benchmark thread isn't much of an indicator as most people don't post their resolution and if they have they have only played on one or the other.Im trying to get a better indicator on the performance difference with newer games. Are we talking 2-6 fps drop or 10-20 or more?
View 17 Replies View RelatedSo i'm trying to figure out the best resolution for using my macbook pro in clamshell mode. I think ever since i installed snow leopard the new resolution choices i have are not longer pixel x pixel, but actual TV resolutions, such as 1080i, 720p, 420p. In the past I've used SwitchResX to do custom resolutions for my tv but that dosnt seem to work anymore.
I'm trying to find a resolution where text is easy to read. 1080i looks pretty but text is extremely small. 720p the text is larger and easy to see but is very fuzzy and not easy on the eyes. I guess this has something to do with the pixels on a tv being farther apart than that of a computer monitor. It's a 32" LCD TV. I'm using a DVI to HDMI cable (Non-Unibody Macbook Pro).
So I installed Vista 64 bit on my Macbook Pro (Santa Rosa), I installed most of the drivers I can find, but I cant get the screen brightness buttons to work (F1 and F2)
View 2 Replies View Related1) Having a difficult time finding anything good on this. Anyone got direct comparison pics between the two on the 15"?2) Also how much brighter are the mid-2010 15" displays compared with the late-08 15" displays? IIRC the 2009 screens got a wider color gamut and more brightness than the original unibody screens.
View 24 Replies View RelatedI have dual ACD's. How do I make it so that both screens have the same brightness? If I adjust the brightness in the display settings it adjusts the main screen, but then not the other one. How do I make them the same?
How does the Antiglare screen look? Does it look cheap and flimsy like the matte screens on the pc laptops?This is my first Mac and i'm looking at going all out and getting the top of the line 15". I know I definitely want the HD screen, i'm just not sure which screen looks better. What about a 5400 vs 7200 rpm hdd? Is this upgrade worth it?
View 24 Replies View RelatedFor those who would like to try adapt to hi-res screen of the 15'' but the not sure if they can, if they can't adapt to the hi-res, it's possible to set the resolution to 1440x900 with no appearence differences from the standard res screens?So the appearence and quality of the hi-res screen set to 1440x900 is the same of the standard res screen?
View 4 Replies View RelatedI went to Best Buy yesterday and they just got the new imacs in and had on display side by side. The 21.5 display was not as bright and vibrant as the 27 display. The apple and best buy guys could not tell me why the difference. The settings were checked and found to be the same for both machines. I was going to get the 21.5 but now not so sure. I definitely like the brighter 27 better. Is this normal? Why is the 27 brighter? Has anyone else noticed the difference?
View 6 Replies View RelatedI have the 21" iMac and need to brighten the screen. How do I do this?
View 2 Replies View RelatedMy Macbook Air is doing something pretty strange..
This is as far as my brightness will go up. This is using the keyboard brightness thing on F1 and F2. When I go into the system preferences, I can drag the brightness to the top, but as soon as I release the mouse, it automatically flicks back to where it was before without getting any brighter.
Does anyone have any ideas as to the cause?
The model number of my macbook is A1342 if that helps.
How bright is the default Macbook Air Brightness? Mine is fully maxed, did it come like that?
View 1 Replies View RelatedI have mine on one bar and I am finding this okay. Full brightness practically burns my eyes. Where do you have your brightness set to?
View 14 Replies View RelatedI have a Macbook Pro 13.3 ", only a few months old. When I use this, whether I use the word, web surfing etc then adjust the brightness of the screen itself from strong to weak and back, all the time. This happens both when connected power and do not. And no, it's not that it goes into power saving mode, this occurs during use.
Info:
MacBook Pro
The brightness is turned all the way off on my MacBook pro and the only way to turn it back up is through system preferences. But I cant see it and everytime I push the brightness control keys it makes a beeping noise. And won't do work.
Info:MacBookPro
i can't change the brightness on my macbook pro. i tried the buttons on the keyboard, went to settings and tried to do it from there, didn't work. i have restarted my computer as well and that didn't make a difference.
Info:
MacBook Pro, OS X Mavericks (10.9.4)
I have a 2012 macbook pro and needed to change the brightness of my monitor for my eyes, the problem is I find it hard to see the tab bar now because it is too dark. I looked on these forums and found how to change the brightness of the tab bar without compromising any of the other parts of the screen, but it is not for my particular year or model " [URL]
Info:
Apple TV, blinking light on apple tv box stop
When I turn my brightness all the way down, there's still a barely (but clear, still) lit circle at the centre of my screen. I have a 13'' mbp. I can even see my cursor and move it around. This spot, at very low screen brightness, appears kind of yellowish. When I turn the brightness up, it is not noticeable. The circle part has roughly a two inch diameter.
I've had the mbp for about a month, and just noticed this now. I do turn my brightness down quite a bit, but its usually in a well lit classroom and thus its possible I just did not notice this circle that is still barely lit until now.
UPDATE*: I have just discovered that covering the lit apple logo on the screen's exterior (directly opposite the lit circle i suppose) causing the circle to gradually disappear. THe laptop is sitting behind a window (ie light can shine on that apple logo)...what's up with this?
I just got a new 15" MBP and it keeps changing the screen brightness by a couple notches either way on it's own. Anyone have/heard of this problem?
View 11 Replies View RelatedMy MacBook's screen is pretty dim, even at full brightness. The iPod Touch far outshines it and even a Sony PSP is brighter.
View 24 Replies View RelatedI originally purchased a SR MBP a couple weeks ago and come to find out, the LCD was bad and Apple declared it DOA. I went to the Apple store and swapped it out for a new 2.4GHz Penryn MBP. I am running Vista via bootcamp and am noticing a high pitched whine coming from the top left hand side of the keyboard, near the LCD. Puzzled as to the cause, I started playing with some controls to see if anything made a difference and noticed that when I dim the LCD to the min, it almost goes away. When I turn off the LCD it does in fact go away and when I increase it to maximum brightness it also vanishes. The noise seems to be the loudest when the LCD brightness is set in the middle. This problem only occurs in Vista, not OSX. I thoroughly toyed with the brightness in OSX and listed carefully, but like I said, not noise is present.
Should I be concerned and call Apple, or just ride it out? It does bother me a bit considering I use Vista for Office 2007 tasks. However, since the problem only occurs in Vista and not OSX, it this indicative of a software issue, or do you guys think it is hardware related? cmm26red
I found the setting under Displays to automatically adjust brightness, but is there a way to set this different for Battery or Power Adapter? I would like to keep this option on for using the Battery, but would like the display at a constant level when using the Power Adapter.
View 3 Replies View RelatedI recently purchased a unibody macbook pro 2.8Ghz (awesome machine by the way) and was wondering whether would the LED screen get dimmer over time like the previous non unibody models?
When I had my powerbook and non unibody macbook pro, I had a habit of keeping the brightness at full and realize after a while it starts to get dimmer and dimmer. A good fren alerted me to try and keep the brightness at 50% to conserve battery life was wondering do u any of u notice the same dimming occuring on ur UMBP?
Recently, after about 5 minutes of use (not sitting idle), my MacBook's screen will go very dim. I hit the buttons on the keyboard to take the brightness all the way up, but it doesn't get much brighter and there's only one thing that I can do to make the screen go brighter: I go into System Preferences and click Display. The second I click that, the brightness returns without me doing anything in the Display section, so after Display comes up, I just close it out and the screen brightness is fine for a while. It seems to do this after the lid has been closed for a while and then starts dimming again after opening the lid and using it for about 5 minutes. Is there a way to fix the auto-dim mode without disabling it? MacBook (white) is running Leopard 10.5.8 with all the latest updates.
View 2 Replies View RelatedA few weeks ago the display on my 2008 Macbook started going black randomly. I wouldn't call it a flicker, because when it goes black, it does not come back on unless I turn the brightness all the way down, and then back on again.
Sometimes it will go black, I turn the brightness all the way down, then back on again, and it will stay lit for a few minutes. Other times, the screen flashes when I turn the brightness up to 1 but then goes to black immediately. There are times where it won't stay on for more than a split second for almost half an hour, and I can't do anything but keep trying to turn it on in the meantime. Eventually it will start to work for either a few minutes, or half an hour, or longer, but if I turn it up too bright, it goes to black again. I keep it at 2/16 brightness once it starts working. If I'm feeling lucky I'll go up to 4/16.
So after doing some research I decided to try and replace the inverter. I just did this successfully, and after a few minutes the problem returned. So now I'm at a crossroads. I can take it apart again and replace one of the inverter cables, but I'm not too hopeful about that. I'm out of warranty and will not pay hundreds of dollars for Apple to repair it. My long term plan-B is to buy an LCD monitor and wireless keyboard to use it in clamshell mode.
So my question is if anyone has any other ideas about what may be wrong, and what I can do to fix it. The display itself appears to be fine. My dad thinks it may be a motherboard issue. Any thoughts?
