So on my computer when I click on instal nothing happens. Also my software update app is not opening. Does anyone know a possible cause of this and maybe a possible solution.
Info:MacBookPro, Mac OS X (10.7.3)
Macbook Pro 17" Early 2011
Notes. Failed HDD ASD Test. A new hard drive was installed in September of 2011 after the previous hard drive failed. Having worked well until now the system seems to give the same problems as it had previously. I am wondering if this is a compatibility issue as others have pointed out.
I have been told by the technician my only option is to replace the entire hard drive again for the second time with a new one. However to my understanding a ASD test is very specific and this my not be necessary? Further I am attempting a final backup just in case. I don't have to take it in where I could just back it up myself without the system shutting down.
Info:
Mac Pro
my white macbooks hard drive broke along with my cd drive. I purchased a new hard drive and put it in but now I have no way to install Leopard since my cd drive is broke.I do understand the best way would be to buy an external CD drive and use that but I would rather not waste all that money on one use.I do have a firewire cable and my friend has a white macbook. I've heard that you can boot using another computer and use there cd drive via firewire by holding "T" or whatever.
View 4 Replies View RelatedI'm literally two steps away from installing a new hard drive and I can't get the torx screws out. Is it absolutely vital I take them out and put them in the new hard drive?
View 6 Replies View RelatedSo i was given a macbook Model: A1181, but without a hard drive. so i thought okay, ill go buy a hard drive. so i go to buy a hard drive, Sata, which what the computer is, and connect it. I have a copy of 10.4 laying around so i go to boot from that disc by holding down the "c" key on boot and there is the standard mac startup chime , but the screen remains white until it flashes the folder with a question mark saying that it can't find the startup disc i also tried to hold down option on boot for startup manager but all i get is a cursor and it never gets to the startup manager. How should i proceed, because i can't get the original hard drive.
Info:
MacBook, Mac OS X (10.4), Model #: A1181
I have recently upgraded my hard drive from 320GB to 1TB and i dont know how to install osx lion. I lost the CD i've got so i downloaded one from a torrent site but i dont know wat to do!
Info:
MacBook Pro, Mac OS X (10.7.1)
My hard drive died last week on my MacBook and I failed to back up anything forever the last couple of months. Anyway, I took it to the genius bar and they confirmed its death, and showed me how to replace it. I decided to go ahead and do so on my own, and also upgraded the memory while I was in there. I also decided to upgrade to lion since my DVD drive was giving me trouble and it'd be easier to use the USB - and yes the computer meets the requirements for Lion.The problem is that when I try to boot up to format the HD, I only get a black screen. No disk utility when holding option, nothing. What am I doing wrong?
Info:
MacBook (13-inch Mid 2007)
I have purchase a new hard drive for my MacBook Pro Intel 2 Core duo and know how to do it, but once it is installed in the machine, I want to know how to install the operating system. The computer now is almost empty (only a few photos I have backed up) so there is no need to transfer any data. Do I just use the discs that came with it? Please tell me how I restore the system with this new hard drive.
View 8 Replies View RelatedI think I'm going to format my hard drive to delete everything from it and start fresh with leopard. I already have leopard installed, but I think I should just format my hard drive (after backing up what I truly need like my music and other files) and then just install leopard.
Question, I have read that I go to disk utility to do this (format and install leopard), is this correct? If so, what else do I need to know before I do this?
Just wondering if it's possible to install games (like Diablo III) to an external drive so it doesn't take up any precious GBs on my MacBook Air.
Info:
MacBook Air (13-INCH, MID 2011), Mac OS X (10.6.5)
I'm installing OSX now but wondering if a direct hardrive copy is better than my time machine backup, or should i have just imaged my old HD?
View 6 Replies View RelatedI have a Macbook pro 17" 2008 model, and I just bought a new 160gb Intel X-25m solid state hard drive. I installed it into the mac with no problem, but when I boot up with the OS boot disc 1, the drive doesn't show up in the "destination" screen. No drives are there. When I open Disk Utility the drive is there, and shown as read/write, but when I boot with option held down the drive isn't there either. I can't even do any repairs on the drive in the disk utility.
View 4 Replies View RelatedI have a macbook pro with latest lion running on it. I want to change the default hard drive with a SSD. I need to know how can i get the default hard drive mirrored on the SSD?
Info:
MacBook Pro, Mac OS X (10.3.x)
Apparently I have over 170 GB of programs saved on my hard drive, but I do not use it for anything fancy or did not install anything spectacular. When checking the program size, iMovie is the biggest one with only 2,1 GB. I cannot find the reason why there should be so much on the hard drive.
I have a Macbook Pro of middle 2010, updated to Yosemite lately.
Info:
MacBook Pro (15-inch Mid 2010), OS X Yosemite (10.10.1)
i was wondering if it is possible to install snow leopard without a superdrive or the remote disc utility, but from an external hard disk drive which the snow leopard files have been put on.i have already googled to the end of the world. no success so far.
View 12 Replies View RelatedI have a 13 inch Aluminum Late 2008 MacBook. Processor 2 GHz Intel Core 2 Duo, Memory 4 GB 1067 MHz DDR3, Software Mac OS X Lion 10.7.4 (11E53). Currently I have a 160 GB SATA disk as my hard drive a d 4 GB of memory. (Is it time to upgrade or what?) I recently bought a Western Digital 1 TB internal hard drive to replace my exisiting internal hard drive. I spent a lot of time last night trying to first- connect this new hard drive to my computer so that I can then clone the existing hard drive and then hoping that I would get that done so I could install the new hard drive. No such luck.
My current hard drive is partitioned as follows:
Name: Macintosh HD
Format: Mac OS Extended (journaled)
Size: 132.5 GB
Name: BOOTCAMP
Format: Windows NT File System (NTFS)
Size: 26.69 GB
When I was partitioning the new drive I did so as follows:
Name: Macintosh HD
Format: Mac OS Extended (Journaled)
Size: 973.51 GB
Name: BOOTCAMP
Format: MS-DOS (FAT) --- This was the only option that I was given that I thought would work. I did not have the option of "Windows NT File System (NTFS) to choose from. Question # 1: is that going to be a problem? I only run 1 program on Windows and that is the only reason I have BOOTCAMP on there at all. However, I do HAVE to have that program. Like I said it didn't give me the option to choose Windows so I didn't know where to go with this. Any help with that would be awesome.
Size: 26.34 GB (I just used the same size that was current, or close to it.) I connected the Western Digital 1 TB through an external device, partitioned it as stated above, and then used Carbon Copy Cloner to clone the drives. The first one went through fine. (It took 2 hours and I went to bed before it finished.) This morning I woke to see that it had gone through well. I then started the process with the BOOTCAMP drives. However, before I started it gave me errors stating that I wouldn't be able to run Windows off of the Cloned BOOTCAMP drive. Question #2: Is it because of the Format type I chose when partitioning?
Info:
MacBook (13-inch Aluminum Late 2008), Mac OS X (10.7.3)
I am still just a little confused about installing OS X onto the second (new) hard drive.
Questions:
1. Is it necessary to install an operating system? What are the advantages of doing so? Can I use it without installing?
2. If I do install, do I have to buy another version of OS X or can I use the same one I installed on my first hard drive?
Information:
PowerMac G5 dual 2.0
Mac OS X (10.4.11)
I'm getting a new hard drive in my iBook G4 tomorrow, as well as more memory, and was wondering if there is anything special I will need to do to install Leopard on this HD that has nothing on it.
View 24 Replies View RelatedMy son was given a G4 that had a dead HDD. I put in a partitioned via windows xp HDD and tried to load the osx, all i get is the grey screen with a face/? flashing.
View 1 Replies View RelatedI have the disk image for Leopard on my external hard drive. I put it on there from my Powerbook. I tried to reinstall Leopard onto a Macbook but it wouldn't let me because I had to do a GUID partition on the external hard drive. I did that, put the DMG back onto the external drive and went to install it. I went to Startup Disk under System Prefences but my hard drive isn't showing up.
View 4 Replies View RelatedMy hard drive recently died on my aluminum 15" g4 powerbook, 1.5ghz. I decided to replace it myself, it seemed like an easy enough task; simple pull and plug. The installation of the hardware was simple a 7200 rpm hitachi ata 100gb; compatible from what I read on [URL]
I Basically need to know how to get an OS on a Brand NEW Hard Drive. My specific problem is below:
When I turn on my machine, I get a small folder in the middle of the grey screen that flashes between having a "?" icon and the finder "Face" icon. I figured I need to install from the mac os x CD.
I don't have the Panther CD that came w/ my comp so I borrowed the tiger CD from my sister who just got a MacBook. With the disk 1 of 2 in my computer it loads to a screen with a large power button icon and a notice to restart the machine in 4/5 different languages. Overlayed on this screen is a code script with little english but some understandable stuff saying I don't have the right driver(s), that it is "hanging in", "Panic".
Can I only load Panther on it? I read something about some installers using 4 discs?
PS: despite my profile I don't have any OS on the hard drive right now.
so my boss' ibook g3 just broke, he brought it to apple and they said it needs a new hard drive and were going to charge him something like 400 dollars to replace it. He decided not to do it because it's so old. (not sure how old, but it's a white g3 with a cd tray). Anyway, i told him i should be able to do it. I've found directions online on ifixit and stuff but need a few more questions answered.
1. Will any 2.5 inch hard drive fit? I think i'm going for 5400 rpms because i don't want it to get too hot and he wants 80 gb. how is this one? [URL]
2. How will i run the os once it is installed? Do i need to installl 10.0 first and then move up? Can i install from the cd or do i need to do it from another computer via target disk mode?
3. ifixit suggests i get a "spudger" which i guess it a plastic anti static toothpic type thing to remove hard to get parts. Definitely needed or no? I have a set of small screw drivers that i've used for my powerbook that i thik should be fine.
4. Any tips at all you wanna throw at me.
I just thought I'd mention this for anyone who is thinking of using a Western Digital 1TB drive on your PPC Mac running 10.4. The MyBook Essential 1 TB external USB 2.0 drive is not compatible* out of the box with my Mac PPC G5 computer. If I plug it in, I get a message that the drive is not readable and an offer to initialize it. However when trying to partition the drive using Apple's Disk Utility (in 10.4), I get formatting error: Input/output error.
The solution is to download the WD Macintosh + Turbo Drive utility from Western Digital and install it on your PPC Mac. As previously mentioned, I have a G5, so while I assume this should work for any PPC Mac running 10.4.11, I don't know for sure. If you have an intel Mac there should be no issues with this drive requiring the utility to be installed. This hard drive worked as it should when it was first plugged into the MBP.
I just want to install EWQL Symphonic Orchestras on my 2TB hard drive, but it does not allow me to. I can only install it on my internal mac HD. What can I do to allow the installation on the external HD?
View 1 Replies View RelatedMy newly acquired "ibook G4 1.33ghz 12 inch" is having problems booting just after recently insatlling a brand new WD Scorpio Blue 160GB hard-drive. I installed myself with the very useful [URL] tutorial which ran through the process quite simply. Basically the background story here is, I was given the ibook by a friend of mine who didn't want it as she didn't have the patience, money and time to invest into having it fixed. Some three years ago she dropped it from her coffee table and since then the hard-drive started failing, getting louder and slower to eventually one day not switching on at all. She took the ibook to an Apple Genius bar in LA where they ran diagnostics and resulted it with having a failed hard-drive.
She never had it repaired and has since been keeping it stored away as a spare. She was kind enough to gift it to me, I was well up for the challenge to repair it so here I am!! So, I bought a new hard-drive, successfully installed it and then the moment of truth, the ibook DID switch on, this itself was good news. But ever since I haven't been able to progress any further, as when I switch the ibook on it makes the apple start-up sound then goes to a white screen and says this:
Invalid memory access at SRR0: ff8486a4 SRR1: 00003030
Apple PowerBook6, 7 4.9.3f0 BootROM built on 07/05/05 at 11:14:11
Copyright etc.
Then says:
To continue booting, type "mac-boot" and press return
To shut down, type "shut-down" and press return
Reducing system power
So if I type "mac-boot" it goes to a grey screen with a folder icon in the middle containing a little 'finder' face and a flashing question mark, and then if left for about 5 minutes or so it just switches itself off. Of course it occurred to me that there is nothing on the new hard-drive so it can't boot from anything, I tried using my intel mac's start up disk which has OSX tiger on it, but this doesn't give any better results, I start-up holding C and I here the disk being read but it can't boot from it, it still goes back to the OpenFirmware screen as above.
How would I go about installing OSX on a freshly install hard drive? I have Snow leopard installation Cd's...but how can I partition a new hard drive to install the OSx without being able to get into disc utilities?I also have a time machine back up of previous hard drive.
Info:
Mac Pro (Early 2009), Mac OS X (10.7.3)
I have no way of finding out the password to get through. I am doing a clean install of Mac OS X v10.3.2, using a pc keyboard at the moment.C-key isn't responding, so I held down alt. I am dead end with this firmware password protection.
Info:
PowerMac, Mac OS X (10.3.x)
I am having trouble installing Lion on a partitioned hard drive I have three internal HD's The first I am running the system on 10.6.8 (which is up to date) , the second I do most of my work on and the third I have partitioned into two and I am trying to install Lion on one of the patitions. But Lion has decided it will only go on the first HD. Above is the one I want to put it on, but it's not available and I can't change the partition scheme. None of the things the directions state are usable?
View 4 Replies View RelatedWhen installing Snow Leopard, will it erase my hard drive and force me to start all over or will it just update the software and keep everything the way it is on my Mac now?
View 6 Replies View RelatedIs it possible to install Snow Leopard from a disc image on an external drive?
View 7 Replies View Related