MacBook Pro :: New Intel X-25M Firmware Enables TRIM?
Oct 26, 2009only under Windows 7...At least OS X users will get the write speed bump [URL] /Deta...17485&lang=eng
View 24 Repliesonly under Windows 7...At least OS X users will get the write speed bump [URL] /Deta...17485&lang=eng
View 24 RepliesI purchased an Intel 34nm 160GB SSD 12 months ago to install in my MBP 13". It has been an excellent drive, however, started to significantly slow down over the last few months. The only way I was able to recover to original speeds was by formatting the entire drive as a windows drive and running the Intel SSD Toolbox app in Win 7 (manual trim command).Finally I reinstalled OSX and voila drive was as fast as when I initially purchased it.Either Intel needs to release a OSX compatible toolbox app or Apple needs to build the functionality into OSX.I know this has been a topic before but thought I'd share my experience.
View 4 Replies View RelatedIntel X25-M 160GB, how do I find out if it has the latest firmware v1.5 from Dec 8, 2009. And is the Solid State Drive Toolbox v1.3 from Mar 22, 1010 worth downloading?Intel's download/support page doesn't tell you how to know if your SSD has the latest firmware or not.
View 8 Replies View Relatednew firmware is out. 8850here for 160gb: [URL] filt l&submit=Go%21
View 1 Replies View RelatedJust received SuperDrive Firmware Update 3.0, MacBook EFI Firmware Update 1.4, and AirPort Client Update 2009-002 1.0 on Software Update for 13" Unibody MacBook.
View 2 Replies View RelatedCan I get a quick survey of people who installed Intel X-25M and Firmware 1.7 on 2009 MBPs? Please mention if you had any problems or no problems at all.
View 10 Replies View Relatedmacbook 1,1 efi and smc up to date, battery not being charged, up to today magsafe led flashed amber green, now solid green but menu bar says battery not charging?
Info:
MacBook, Mac OS X (10.5.8), 1tb HDD, 1 gb memory.
my macbook pro (late 2011) is powering down without warning. I'll be writing an email and w/o warning, it's off. I'm unable to turn it back on with the power button unless i hold it down for a slow count to 10. Fyi - machine is 100% charged when this happens. Two days ago, I did SMC and PRC resets with Apple Care. I needed to do both of these again yesterday on my own.
Info:
MacBook Pro, Mac OS X (10.7.4)
13" 2.26ghz MBP w/ 64GB Intel X25-E w/ Firmware Update Xbench score
View 7 Replies View RelatedI'm trying I downloaded th B03 update But it says: "This computer does not need an update" But bootcamp disagrees.Anyone else have this problem, how was did you solve it?
View 3 Replies View RelatedI've been going on two weeks now without my 13-inch mid-2009 mbp...i installed the 10.7.3. lion update but after it was completed i powered down my laptop and started it up only to find a blinking folder with a question mark...the logic board was replaced in mid-2010...i'm able to boot of an external drive running lion 10.7.3...i replaced the wd hdd with a new one & now it doesn't recognize it in disk utilities...i've replaced the ram with new ram & changed the hdd cable...i took it to apple & they said it should be either the cable or the hdd...i tested the hdd in another enclosure & it's running fine..
Info:
MacBook Pro (13-inch Mid 2009), Mac OS X (10.7.3)
How long/soon do you guys think we have to wait till OS X gets TRIM support? Do you think we will get it in 10.6.5 or do you think we will have to wait till 10.7?
View 24 Replies View RelatedI recently updated to a Macbook pro 15" with 1TB SSD, should I use TRIM enabler? I have read conflicting information online, and am unsure if I should do this. What are the advantages? What are the dis-advantages? What is the process?
Info:
MacBook Pro (Retina, 15-inch, Mid 2014), OS X Mavericks (10.9.4), 1TB SSD
I've spent the best part of the day researching SSD drives, I'm wanting to pop one in my MBP.I've been looking at the OCZ Vertex and also the Intel X-25M Gen 2.I've set my heart on getting the OCZ but after spending a good hour on their forums, it seems that (like all other drives) there isn't a 'wiper' tool available for OSX.Should this affect my decision? No-one knows if Snow Leopard will support TRIM and I don't want to left with a drive that has lost most of it's umph after a few weeks.I don't claim to know all the details of TRIM (I'm a mere-mortal wanting faster performance), so please feel free to put my mind at ease
View 11 Replies View RelatedFirst post so I apologize for any rules I may be breaking. A lot of discussion on this forum has centered around SSD's and their use. From what I have gathered, the price is quite high, but the speed is impressive. I am going to university next year and am looking for a new laptop. I have used Windows all my life and don't have anything that really requires OSX (graphics applications, etc). However, I like the design of the MBP and want something high quality that will last me 4 years. The SSD's are looking pretty appealing for the sheer speed, but OSX doesn't support TRIM, which could affect future speeds.
View 24 Replies View RelatedSo after knowing nothing about SSDs I finally ordered this one for my 2010 i5 MBP.
[URL]
I have searched and I know Snow Leopard doesn't support TRIM yet but I was wondering if I use boot camp and install Windows 7 won't TRIM be available then? I can install all the software that came with the SSD under Windows. So my question is if I do that will the Trim feature only work on the Windows 7 partition or the entire drive?
I own a MBP 13" early 2011 model  I just recently Upgraded my 320GB hard drive to an intel 520 SSD (240gb). After setting up lion 10.7.3 i realized that TRIM was not enabled by default. after searching around I found a way to enable it. However, I've also read that alot of sandforce 2281 controllers have their own form of garbage collection. intel uses some custom firmware they written so would it be benificial if i enable trim or not?
Info:
MacBook Pro, Mac OS X (10.7)
I tried to apply the firmware update to the Intel X25-M SSD on my 09 MP yesterday. I'm not currently having any issues with the SSD, but thought I would be proactive about updating.The update failed , and I received the following recommended changes before trying again:- Disable Drive Protection in your BIOS and retry the update- Enable Legacy IDE mode in your BIOS and retry the updateHas anyone out there successfully applied this update on an 09 Mac Pro? If so, were any tweaks needed to make it work?
View 18 Replies View RelatedI was travelling and added a firmware password a few months back, I now want to disable this to install Ubuntu on a partition of my MacBook - but there are no directions how to in the utility.I looked at the Apple doc I originally used to set the password: [URL]/HT1352, and I cannot find a companion document for taking it off. So, if anyone knows how I go about doing this,
View 2 Replies View RelatedIt looks like OS X supports TRIM, but still says that my SSD doesn't support it. How stupid is that?
View 10 Replies View RelatedI�m not quite sure if this has been mentioned before, but I was wondering if the TRIM command would be functional if I was to run Windows 7 via VMware or bootcamp?
I know Snow Leopard does not support TRIM and Windows 7 does, so I was hoping as a workaround to this issue, I would run windows 7 on vmware and maybe reap the benefits of TRIM support in Windows 7? I do on occasion use Windows 7 via VMware, so I'm not only considering installing it for just the TRIM command function.
I'm going to update my Macbook pro running 10.6.8 to as SSD, which drive will trim support? macbookpro1.2 (A1151)
Info:
MacBook Pro, Mac OS X (10.6.8)
I have installed a Seagate 1 TB hybrid drive (8gb flash, 2.5", 5400 rpm) in my Mac 8.1 (early 2011 MBP, 16 gb memory), which runs the Yosemite OS.  After reading about SSD's and Trim, and the negative effect of Trim disabling upon SSDs after several months, I am wondering if there is a need to enable/disable Trim upon a THD (traditional hd drv) which has 8gb flash for quick booting.?
Info:
MacBook Pro (13-inch Early 2011), Trim and Hybrid HD
Could someone check in their System Profiler -> Serial-ATATRIM would be really useful during the lifetime of the flash drive.
View 24 Replies View RelatedYour answer might affect my decision about the purchase ofOCZ Deneva 50Gb SSD drive with SF-2500/SF-2600 controller when it comes out (early 2011).
View 18 Replies View RelatedWhenever the MBP refresh happens I intend to upgrade the stock HDD to a 7200rpm 500GB HDD or, less likely, to an SSD. An SSD had been my first option until I learned about SSD performance degradation and the lack of TRIM support in OSX. I was ready to stomach the massive SSD price premium, but the lack of TRIM would most likely rule it out completely for me. And I recall reading something about the MBP hardware connection (perhaps the the SATA connector) having a slight bottleneck compared to SSD-equipped Windows machines; so some of the top of the line SSDs won't be able to max out their transfer rates on OSX. (This is the best, not so informative, link I can find now referring to that impaired performance: http://macperformanceguide.com/Revie...tml#Single_MBP) With these performance issues, I've become perplexed why SSDs are popular amongst some Apple users
View 24 Replies View RelatedWhat is the best way to setup effective TRIM for a newly installed SanDisk Ultra Plus 256 GB (old version) drive on a mid 2010 MacBook Pro 6,2 with 8 GB RAM and running just installed Yosemite OSs 10.10.1? The new operating system is not referenced by SanDisk.Â
Info:
MacBook Pro, OS X Yosemite (10.10.1), SanDisk Ultra Plus GB (old version
What do I do to access my ipad if I no longer remember the password?
Info:
iPad
I forgot the Firmware Password, and want to reset it. How can I do it? No DVD included when I bought it. All the startup keys, like C, N, T, D, CMD+s, CMD+Option+p+r, CMD +v, Option, and Shift, does NOT work. To add or remove DIMMs does not work.
Info:
iMac, Mac OS X (10.7.3)
How do I update Firmware with a newer version?
Info:
iMac, Mac OS X (10.7.3)