MacBook Pro :: 13" 2.26ghz MBP 64GB Intel X25-E With Firmware Update?
Jun 24, 200913" 2.26ghz MBP w/ 64GB Intel X25-E w/ Firmware Update Xbench score
View 7 Replies
ADVERTISEMENT
MacBook Air :: Runcore 64GB Firmware Flash?
Mar 31, 2010I have a Runcore 64GB LIF SSD in my Air. Apparently it's still running 1571 version of firmware. I would like to upgrade that to the latest 1916. Couple of questions:
1. Which firmware executable do I use for this particular drive?
2. Is it safe to flash 1571 straight to 1916? I heard some users had problems if one doesn't flash to an interim version first
3. Is there a write up how to do this flash on Mac anywhere? I found one for Rev A but not 100% sure it's exactly the same as Rev B/C since controllers are different
Mac :: Intel X25-M SSD Firmware Update On 09 Mac Pro
Apr 15, 2009I tried to apply the firmware update to the Intel X25-M SSD on my 09 MP yesterday. I'm not currently having any issues with the SSD, but thought I would be proactive about updating.The update failed , and I received the following recommended changes before trying again:- Disable Drive Protection in your BIOS and retry the update- Enable Legacy IDE mode in your BIOS and retry the updateHas anyone out there successfully applied this update on an 09 Mac Pro? If so, were any tweaks needed to make it work?
View 18 Replies View RelatedMacBook :: 13" Macbook Intel Firmware Update Options?
May 2, 2009I'm trying I downloaded th B03 update But it says: "This computer does not need an update" But bootcamp disagrees.Anyone else have this problem, how was did you solve it?
View 3 Replies View RelatedIntel Mac :: How To Update Firmware With Newer Version
Apr 27, 2012How do I update Firmware with a newer version?
Info:
iMac, Mac OS X (10.7.3)
Intel Mac :: Firmware Update To Airport Express Should Unplug The Unit Then Plug It Back In?
Feb 26, 2012After a firmware update to airport express should I unplug the unit wait a bit and plug it back in?
View 3 Replies View RelatedMacBook :: Software Update Failed - EFI Firmware Update 1.4?
Mar 3, 2012Superdrive Firmware Update 3.0 fails each time, /Applications/Utilities/SuperDrive Update.app asks me to quit all apps and try again which I did but of no. I also retried with a reboot.
Info:
MacBook, Mac OS X (10.6.8)
Mac Pro :: Intel X25-M 160GB Firmware And Toolbox - How To Find A Latest Firmware
Apr 27, 2010Intel X25-M 160GB, how do I find out if it has the latest firmware v1.5 from Dec 8, 2009. And is the Solid State Drive Toolbox v1.3 from Mar 22, 1010 worth downloading?Intel's download/support page doesn't tell you how to know if your SSD has the latest firmware or not.
View 8 Replies View RelatedMacBook Air :: Rev C Has GPU X6 Then Why Not A Firmware Update To X6 For Rev B
Jun 14, 2009If rev C runs the GPU at a higher speed and hw otherwise is the same as rev B then why couldn't Apple release a firmware update to let rev BGPU rum faster as well?
View 18 Replies View RelatedMacBook Pro :: EFI Firmware Update 1.8 Available
Dec 9, 2009Just got this through Software Update. More info here:
[URL]
Quote:
About MacBook Pro EFI Firmware Update 1.8 This update eliminates the noise made by the optical disk drive during system startup and wake from sleep on MacBook Pro computers. When installation is complete, run Software Update again, and install SuperDrive Firmware Update 3.0
To complete the firmware update process, follow the instructions in the updater application (/Applications/Utilities/MacBook Pro EFI Firmware Update.app). The updater will launch automatically when the installation is complete.
MacBook Pro :: Using SMC Firmware Update For 2007-08 MB's And MBP's?
Oct 8, 2010[URL] MacBook SMC Firmware Update 1.4 is available either through Software Update or via direct download, and is applicable to the following models:
MacBook (13-inch Late 2007)
MacBook Pro (17-inch, Early 2008)
MacBook Pro (15-inch Early 2008)
MacBook (13-inch, Early 2008)
MacBook (13-inch, Late 2008)
MacBook Air :: Case For MBA - How Do I Update The Firmware To 2.0?
Dec 13, 2010I finally brought the 13in macbook air. What are some good softsleeves for macbook air 13in. I want a soft sleeves that fits perfectly with macbook air and below $30. Is it possible?off topic: this is my first mac computer, how do I update the firmware to 2.0?
View 1 Replies View RelatedMacBook Pro :: Installing EFI Firmware Update 1.7?
Jun 22, 2009After the update, my MacBook Pro is extermely sluggish. Prior to the update, I was zipping along like most happy MacBook Pro owners. After the update, I constantly see the dreaded beach ball when doing almost anything with the laptop, Safari pages take longer to load, etc.
It's almost as if the udpate had the opposite effect and actually throttled down my WD 500GB HDD performance to a large degree.
Like I said, prior to the update all was good. I've been searching to see if there is a way to revert back to the previous firmware to validate that the update caused the problem but I haven't been successfull in finding anything yet.
MacBook Pro :: EFI Firmware Update Annoying Pop Up
Jan 8, 2010I currently have version 10.6.2 update for my macbook pro and after updating the EFI firmware update to 1.8 I get an annoying pop up every time I start the computer. I checked for any additional updates to see if it will go away, but I seem to have all the updates. Is there anything I should do to get rid of this pop up? Pop-up window reads: your computer's firmware is up to date with version 1.8 of the macbook pro EFI firmware update.
View 1 Replies View RelatedMacBook Pro :: EFI Firmware 2.5 Update Is Hanging Up?
Feb 23, 2012Just downloaded new firmware at suggestion of my auto-update app. Since loading, the computer has been trying to reboot for over 45 minutes so far. Grey screen w/ Apple logo and spinning grey wheel...The firmware update info says not to turn off, unplug, etc until rebooted.
Info:
mbp, Mac OS X (10.5.2)
MacBook Pro :: Ram Not Working After 2.8 Firmware Update?
Feb 29, 2012Installed the 2.8 firmware update on my late '08 macbook pro and after restarting it, it would just beep 3 times and not start up. I pulled my 8 gig kingston ram out, repositioned back and still the same issue. Slapping in the original 4 gigs of apple ram, it will start up and work fine though. Is there a fix to get the 8 gigs working again on the machine?
Info:
MacBook Pro, Mac OS X (10.6.8)
MacBook Pro :: Firmware Update Causes It To Not Respond
Mar 24, 2012I just ran the latest firmware update for my 2011 mac book pro and after it installed it now won't start up, only getting to the gray screen before freezing there.
I've tried all the on line solutions I can find on Apple's site, but no luck.
Info:
MacBook Pro
MacBook Pro :: EFI Firmware Update 2.8 Does Not Install
Apr 1, 2012MacBook Pro EFI Firmware Update 2.8 does not install. I was prompted several times to install and restart (MacBook Pro late 2008) and authorised it each time. In every case, the update was proposed again when Software Update checked. I have OS Lion latest version installed. What to do about this bug?
Info:
MacBook Pro, Mac OS X (10.7.2), photos in Sony Cyber-Shot .jpg
MacBook Pro :: EFI Firmware Update 2.5 & Booting OS 10.6.x?
Apr 23, 2012Are there any known compatibiity issues with booting from an OS 10.6.x drive after installing EFI Firmware Update 2.5?I am running Lion (10.7.3) on my MacBook Pro (13-inch, Mid-2010) but have held off installing the firmware update because being able to boot from a 10.6.x backup drive is more important right now than internet-based Lion recovery. If there's no issue booting 10.6.x (and running apps), then I will go ahead and install the firmware update, otherwise I'll wait awhile longer.
Info:
MacBook Pro (13-inch Mid 2010), Mac OS X (10.7.3)
MacBook Air :: EFI 2.9.1 Firmware Update Not Installing
Sep 6, 2014I've been having an issue trying to install the recent MacBook Air EFI Firmware update version 2.9.1. I have attempted the following:
- Installing update via the App Store
- Installing update via Software Downloads from Apple website
- Verifying boot drive using Disk Utility and fixing and partition errors, as well as checking and fixing any permission errors.
Info:
MacBook Air, OS X Mavericks (10.9.4)
MacBook Air :: Recent Firmware Revision Update On MBA?
Dec 10, 2010I did the latest firmware update few days ago and went through that series of boots. It's a shame on me that I didn't jog down the ROM revision info before the update. According to the this link:
[URL]
The FM Rev should be MBA31.0061.B01 after the update.
My MBA 13 is still read MBA31.0061.B00 after I thought I did the update. Does that mean the update didn't go through?
MacBook Pro :: Momentus XT Firmware Update Through Parallels
Dec 20, 2010Will updating that firmware bring me trouble if I do it through Parallels?
View 4 Replies View RelatedMacBook :: Battery Firmware Version Update 1.4?
Mar 3, 2009This came out yesterday. I have seen no comments anywhere about it so I started this post. Did you update your Macbook? [URL]
View 4 Replies View RelatedMacBook Pro :: Firmware Update -3.0Gbps Vs 1.5 Gbps?
Jun 23, 2009I have a uMBP 13' base model. I just received my Western Digital scorpio blue 500g hdd that is SATA 3.0. Should I install the new firmware update before I load anything onto the drive so i can utilize the 3.0Gbps instead of the 1.5Gbps? Should I install it at all? Will I notice a performance bump? I also received 4gb crucial ram, should i install the ram before installing the firmware update? I was wondering if anyone else noticed the screen slightly getting brighter and dimmer, almost in intervals, when it is not plugged into the power cord.
View 4 Replies View RelatedMacBook Pro :: 1.8 EFI Firmware Update Eliminates Noise
Dec 8, 2009This update eliminates the noise made by the optical disk drive during system startup and wake from sleep on MacBook Pro computers. When installation is complete, please run Software Update again, and install SuperDrive Firmware Update 3.0. When I boot my system I can hear that sound like ejecting a disk out of the drive like always... Is that noise they refer?
View 24 Replies View RelatedMacBook Pro :: New SuperDrive And MBP Firmware Update Message
Dec 8, 2009I'm confused why it says "Your computer does not need this update"? It's a MBP4, 1 and has some startup noises and (always has had IIRC) problems with it making noises that don't seem right. I've checked Software Update and there is nothing there (I just ran it and updated a minute ago). I'm curious why it says this, is there a firmware update 1.7 that needs to be installed for the MBP?
View 6 Replies View RelatedMacBook :: Can Apple Store Update Firmware
May 30, 2010I have a macbook 2.4 alu (Late 2008) and Installed linux as soon as I got it.(I just like the cases). Anyway I know that you need to use apple update in osx to update the firmware. I can't dual boot because my HD is MBR. I thought of 2 ways.
A. Install OSX onto a usb device (Cost 30-40 bucks for usb)
B. Take to apple store, Maybe they can do it.
I can't dual boot because my HD is MBR. I heard the new firmware updates stop a lot of issues.
MacBook Pro :: I7 Keeps Rebooting When Trying To Update To Latest EFi Firmware
Feb 16, 2012My macbook pro 17 2011 late 2.4 i7 keeps rebooting when I try to update the latest efi firmware. Have to force shut mac and restart and abort installation?
Info:
MacBook Pro, Mac OS X (10.7.3)
MacBook Pro :: Slow Connectivity After EFI Firmware Update 2.7?
Feb 29, 2012Did everyone notice a significant slowdown of network speeds (wireless at least) after installing this update [URL] on a 2011 MacBook Pro (2.0 i7 15")
Info:
MacBook Pro, Mac OS X (10.7.3), 2011 15" 2.0Ghz
MacBook Pro :: Corrupt Screenshots Since EFI Firmware Update 2.8
Mar 12, 2012I installed the EFI Firmware update 2.8 on my late 2008 MBP (running 10.5.8) and so far, it's seemed to solve the flicker/screen blacking out issue. I can no longer take screen shots any more without them being corrupted, and sometimes the Finder window gets scrambled and my wife needs to re-boot. I'm guessing a corrupted pref file somewhere. Anyone run into this recently and if so, is there a .plist file I can delete?
View 2 Replies View Related