What's the maximum size of an internal HDD I can use with my late 2011 MacBook Pro 17"? And how much memory can I squeeze into it?
Info:
MacBook Pro (17-inch Late 2011), Mac OS X (10.7.3)
i read may post about this but still do not have a solid answer. Will 20GB partition be fine with my Macbook Air SSD drive ?
I only plan on installing a antivirus software and thats about it, maybe 1 program.
When attaching a simple PDF (size 15.8MB) to a simple OS Lion email, when going out it expands to 21.4 MB. This exceeds my ISPs 20MB maximum file size. Why a simple PDF would expand by almost 5 MB. The same email without the attachment is only 400 KB.
Info:
Mac OS X (10.7.3), Mail
Just wondered whats the largest capacity harddrive that would work in my Macbook unibody.
View 3 Replies View RelatedI'm trying to figure out how to change the maximum log file setting for my Cisco VPN. I think on a Windows machine you are able to do this:Â
[Instructions for Windows: right-click "Computer" on your desktop, and select "Manage". Expand "Event Viewer" and then "Applications and Services Logs". Right-click on "Cisco AnyConnect VPN Client) and select "Properties. There will be a "Maximum log size" and a "When maximum event log size is reached" option.]Â
I can't seem to figure out how to do this on my Macbook Pro. I'm running 10.7.4Â
Have tried viewing in Console and while i can see the ppp file - there's no way to see maximum file size settings.
Info:
iCal, Mac OS X (10.7)
Howdy all, just been scouring the web but can't find anything on this. I have a late 2008 aluminium MB 2.4ghz. I currently have a 500gb HD but want to increase this. Is there a max size/capacity that my model supports or can I go nuts and say put a 1TB inside with no dramas?
View 4 Replies View RelatedWhat deteremines the max hard drive for the early 08 macbook pro's? Is it the physical height? or is there a gb limit? I saw this 500gb barracuda drive at bestbuy for $80 running at 7200 rpm and 16mb cache buffer. so it sounds good. But is there anything coming out soon with higher rpm's or higher capacities for laptops? i know theres ssd but thats expensive and low capacity compared to sata for now.
View 9 Replies View RelatedIs there a way that I can set the maximum font size? I want to limit the size of all fonts.
Info:MacBook, Mac OS X (10.6.6)
I just got a Tangerine Clamshell that looks great w/ all original packaging. I was wanting to upgrade the 6GB hard drive with a 250GB, will the Clamshells take a hard drive this big? I know the iMac G3s can't take more than 127gb.
View 5 Replies View RelatedFew questions about this, what is the max harddrive and ram that can be put into it? and what is the latest OS that can be installed on it, I am currently running panther on it.
View 5 Replies View RelatedMy son is using my old macbook pro 13-inch and he went to login using the correct security info but keeps getting denied. and clicking the question mark only leads to the computer recommending the very same password that he is using with no other options to request a change password option. the computer may still be running mountain lion, though possibly mavericks. definitely not yosemite.
Info:
MacBook Pro (13-inch Mid 2009), OS X Mountain Lion (10.8.5)
This just started happening. Startup my Quad Core 2.66, with 10.6.8 (all SW updates), login, and screen zooms to maximum zoom with giant cursor in the middle. The only easy way get it back down to normal res is to do command+esc to get to Front Row, and then hit esc.
View 2 Replies View RelatedAlright I have a current rev Mini 1.83ghz, and want to upgrade the stock 80gb HD, wondering if this drive will work. [URL]. I want the 7200RPM, but wasn't sure 3.0GB would work on the intel controller, thinking it may only support 1.5GB. Also, when I reinstall leopard, does it allow me to format the drive to HFS+ or how would I do this?
View 4 Replies View RelatedThis is my first post here I hope somone can help me. I have a MBP from 2008 I upgraded to Lion about a month ago and had some minor issues right away, but now I can't get past the boot screen without a kernel panic. I did a time machine restore to one of my external drives and it boots up fine. I figured my internal drive was going bad so I installed a new one yesterday and the exact same Kernel Panic happens. I don't live in a city with an apple store so that isn't an option for me. I am contemplating going all the way back to leopard because the was the last os I can remember that was completely stable for me.
Info:MacBookPro, Mac OS X (10.7.3)
I am trying to repair my mac. But in disk utility, the hard disk is not visible to proceed. Its showing disk0 -> volume with only 1.79GB. and all the options are disabled. The capacity of my mac book pro was 500GB.Â
Info:
MacBook Pro, OS X Mavericks (10.9)
I have an Apple iMac with 364GB of Other on the disk. How do I reduce the size of Other?
Info:
iMac (21.5-inch Late 2009), Mac OS X (10.7.3)
My home folder shows a file size of 912 GB, yet the consumed space on my 1TB hard drive only shows 798 GB used. How can that be, given that the home folder is stored on the hard drive (HD)? I discovered the discrepancy when Time Machine wouldn't make backups anymore ... it said there wasn't enough space to even make an initial backup. When tracked individually, the home folder along with the other folders on my HD show a combined size that totally fills up my drive, yet when I checked the space on my HD it says there's approximately 200 GB free. I've run checks (Disk Utility) on both the HD and the external backup drive and they both checkout OK. I excluded almost all of my files from the Time Machine preferences, then it was able to make a succesful backup. Does that mean that the file sizes reported by Time Machine are correct (the drives completely full) and that there's something wrong with my internal HD?Â
Info:
iMac, Mac OS X (10.7.3), 27"
I wasn't sure if it wouls be a bad idea if I wiped the interal hard drive while I'm booting from a recovery disk, then made a RAID 0 with the internal drive and my FW800 external drive. I'm nearing my max for the internal drive. I have a second FW400 drive backing up with Time Machine. I was hoping to just wipe, make the raid volume, and then restore from the Time Machine backup.Â
I guess even before that, my FW800 is not working in Lion. I reformatted while connected by USB, reset power management, and reset PRAM, but the firewire bus panics and takes out the Time Machine on FW400 as well. Is there a fix for this somewhere that I'm missing? I bought the FW800 drive for the above reason, only to run into a wall trying to make it work. I really don't want to do a RAID 0 with a USB connection.Â
I'm not going to try setting up the RAID 0 until I get the FW800 drive working reliably, but I was hoping to kill two birds with one stone.Â
Info:
iMac (24-inch Early 2008), Mac OS X (10.7.4)
I am considering purchasing diskwarrior but want to make sure it can help my situation before I purchase it. My imac will not boot from the internal hard drive (Intel processor) When I use disk utility to try and repair the disk, I get error messages and it won't repair. I can see the HD but cannot repair it. When I connect using target mode with my mac book pro, the hard drive does not appear on my host (macbook pro) computer. I have reloaded OS X (Leopard) onto a firewire external drive and can boot my imac that way but I can not find my original internal Macintosh HD. Will disk warrior be able to help with this scenario. I would really like to access that internal Macintosh HD and retrieve my files.
View 3 Replies View RelatedI have 2 internal Serial-ATA disks:
Both were checked (with Disk Utility and DiskWarrior) and are OK. But only one of the two disks shows in the Startup Disk list in System Preferences->Startup Disk.
PowerMac G5 / OS X (V.10.4.11)
3GB memory
My new 2010 hexacore Mac will have 24G memory, an OWC Extreme Pro 120G SSD (positioned in the lower optical bay) and four 2TB WD RE4 drives. I'll use my old Synology 209 NAS (two 1TB WD Green Raid 1 drives) for TM backups over 1000Mbps Ethernet. Yes, I'll need to upgrade to a larger NAS very soon. This will be my first Mac Pro (have MBPs and iMac) and will be used for web design and development (mostly Adobe CS5 products).
The SSD will be used for boot and application files. I plan to use Disk Utility to create a 1+0 Raid array for data files. For a Scratch disk, should I:
1) create a partition on the 1+0 Raid Array for Scratch
2) partition a chunk of the SSD for Scratch
3) attach a spare external 2.5" WD drive via Firewire 800 for Scratch
Based on my reading, it seems that option 1 makes the most sense but I'm not entirely sure if you can partition a 1+0 array with Disk Utility. I'm pretty sure option 3 is quite silly but wanted to toss out the idea. Lastly, are there any generic recommendations on scratch volume sizing?
I'm new to mac, have been using mine for only three months now, but couldn't help noticing a strange thing. When I go to Disk Utility or cmd+i on a selected partition, the size reported by OSX is incorrect. E.g. I have a 250GB disk, so I'm used to seeing 232GB as usable disk space, which is a totally normal thing. However, OSX tells me that my disk is actually 250GB. More advanced partition utilities (currently I'm using iPartition but suggestions are welcome) report the disk size correctly. So I began to doubt whether folder sizes are reported correctly or "scaled up" to match the size of the disk?
E.g. if I was an ignorant consumer and tried to put 250GB worth of data on the disk, it wouldn't fit as there is not enough physical capacity to accommodate it, is that right?
Is it the normal behaviour or I screwed something up in the system?
My Macintosh Hd is 187GB. It says used amount to be 174 GB. However when I add up all the componenets users 124.35GB+Library 8.91 GB+Applications 9.41GB+ System 5.36 GB= 148GB Approx  What happened to the other 26 GB.
Info:
MacBook Pro, Mac OS X (10.7)
I have a 2009 13 inch macbook pro with 2.4 ghz processor, 4 gb ram, all stock from apple. Machine has been working great until 2 days ago when my system froze, had to push the power off button, tried to reboot but got the flashing folder and the internal hard drive was no longer recognized. I did all the usual things and read the apple support page to no avail. I booted from the install CD and the drive is not recognized in disk utility. I took the drive out, put it in an external case and booted from there and the drive appears to be working.
I put in another internal drive, a Hitachi 500 GB/7200 RPM that looks mac compatible, disc utility will not even recognize it either with the external hard drive OS running or from the install CD. In system profiler, under hardware, it says this computer doesn't contain any ATA drives. Could this be a problem with the SATA cable internally? The rest of the logic board appears to be working as I am typing this on the affected machine running the OS from my former internal hard drive that is now in a casing.
I'm must be hitting some strange key combination / trackpad gesture (I just got a macbook pro) and my font size in safari keeps randomly increasing. This happens on the desktop with the icons as well.
View 4 Replies View RelatedWell, I'm a new owner of a MacBook Pro 13" and the Hard Drive is only 160GB I believe which is plenty of space for what I use it for but I would much rather have my Music/Movies/Pictures and all media separate from that space. I was just thinking of getting a portable External Hard Drive for all of my media but then I could also upgrade my 160GB drive to let's say a 500GB Drive and do away without an External drive. What would you do? Upgrade your existing internal HD or get an External HD?
The MacBook Pro usually just stays on the desk anyways so an External HD wouldn't be any inconvenience to me but if I wanted to just unplug it and go will that harm anything? Also, there is plenty of External Hard Drives available right now and I was wondering if any were better than others? I just want something basic, portable, and works with a mac. No firewire needed, USB is fine with me. I was really looking at the My Passport from WD and was wondering if the non Mac Ready versions work with a Mac anyways? [URL]
Just upgraded to Lion OS 10.7. When I try to search for an upgrade, I get the message URLs with .file not accepted. Anyone know what the problem is?
Info:
iMac, Mac OS X (10.7)
Well, I'm trying to buy a MacBook Pro online, the $100 software and the 3 year guarantee and it says that my credit card information isn't accepted.  I called the credit card company 5 times and they said everything is fine. I retyped all the necessary information 3 times. Still the same result: credit card is not accepted. However, the $100 software is purchased but not the MacBook Pro nor the 3 year guarantee. This is extremely weird as to why one is purchased but not the others. Â
Info:
iPhone 4
However, my hard drive appears to be running fine - haven't noticed any degradation of performance since receiving the warnings two days ago. And HD is still running quiet (no strange mechanical noises I'm accustomed to hearing prior to a failure). Nevertheless, I'm installing a new HD tomorrow and recloning it from a backup external drive (operating from external until then).
View 4 Replies View RelatedThe internal card reader on my MacBook Pro 13" (5/2011) worked just fine until a few weeks ago.Today however it left me in the cold.The SD card that I normally use does not show up anywhere, not even in Disk Utility. Other SD cards don't show up neither. There was no pbm accessing the data using an old Windows PC.A user friendly Sofware Function Test of the Internal Card Reader could give a quick answer where to look for error.
Info:
MacBook
Pro, Mac OS X (10.6.8)
