If you want to use the external display as the main display, and close the macbook pro is it possible that the macbook pro might overheat, or have negative impacts on the machine for keeping it closed while in use?
View 2 RepliesI have an 13" MBP that I ordered new in April, 2012. It is running Lion. I have an external monitor that is capable of 1440x900 resolution. I have an external keyboard and trackpad hooked up, and I like to close my MBP up and stick it in a BookArc. I want to be able to have the internal display disabled and to have the MBP only allow me to put windows on the external display, so long as the lid is closed. I also want to be sure that I am taking advantage of the resolutions available on my external monitor, which are higher than those supported by the internal display (specifically 1440x900).
This doesn't seem to work because I either have to allow the MBP to continue to draw my desktop across both screens (internal and external), OR use the "mirror displays" mode, which restricts my resolution of my external monitor. This means I either forgoe the additional resolution benefits of my external monitor, or I end up with windows that fall off-the-cliff, so to speak, because they are drawn in the portion of the desktop that would be shown on my internal display (which is closed).
I've read the community support pages on using the MBP with an external monitor, most relevantly, this page. It simply recommends using the "mirror displays" option. However, this option, as I mentioned above, doesn't allow me to make use of the additional resolution, and my external display looks bad. how to keep the 13" MBP in closed clamshell position, with the internal display disabled, and use my external monitor at resolutions higher than those allowed by the 13" MBP but which are available to my external monitor when not in "mirror displays" mode?
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3), External display (1440x900)
I am wondering that is it essential to connect power adaptor all the time while operating in closed calmshell mode? When I unpluged the cable it didn't work. Is there some way?
Info:
MacBook Pro, iOS 5.1.1
Just wondering if anyone could help me figure this out.
I have my 40" flat screen plugged into my imac via VGA cable to mirror the image.
I'm just trying to have the imac display sleep while I play a movie full screen through the external TV.
I've tried two different ways but both have failed.
1-I set up a hot corner in the imac to sleep display but this results in both the display and the TV sleeping.
2-I just set the power settings to sleep after 1 minute. This works but then If a movie is playing the computer won't go to sleep.
The external 19" LCD display does not work with the lid closed. However, it does work in full 1680x1050 when mirroring is turned off and the lid is open. When I turn mirroring on and the lid is open, the external display does not work at full 1680x1050, it shrinks the external view so the resolution is 1680x1050 but only displays 1280x800 worth of pixels.
Summary:
* lid closed, mirroring on, external display does not work (goes into "out of range" mode)
* lid closed, mirroring off, external display does not work (goes into "out of range" mode)
* lid open, mirroring on, external display will not do a full 1680x1050, instead will do 1280x800
* lid open, mirroring off, external display will do a full 1680x1050
A USB keyboard and mouse are attached. This exact setup worked flawlessly with a gen1 macbook pro out of the box.
How do I make the display work with the lid closed?
So I've recently connected my MacBook to an external display (a TV actually). Obviously, when I close the MacBook's screen the computer goes to sleep. How do I stop this from happening? I checked in 'help', it said that if I connected the monitor to the computer after closing the display, the computer would continue to run with the display closed. I've already connected it all though (running cables through cabinets, etc.) and I don't really want to undo all of that! Is there an easier way to set the computer to stay on (as opposed to entering sleep mode) when the display is closed?
View 3 Replies View RelatedI have a Macbook Air, and i just picked up the new LED ACD from my local apple store. Since im new to mac, is there a way to either close my Air and not have it go to sleep? I want to use the external display as the primary display with my laptop closed, any ideas?
View 4 Replies View RelatedI typed Mac Help about "to operate the portable computer with an external monitor attached and the display closed. When I close the display of my Mac Book or MacBookPro, the external monitor such as my 50" Plasma monitor or video projector would go black. I read the Help and it said and required the USB Mouse and Keyboard to close the Macbook display and put computer sleep. My question is will the Apple blue tooth or wireless keyboard and mice will work with out using the USB? Has any one try that? I am not sure if I should buy wired or wireless to operate this.
View 10 Replies View RelatedI have a MBP 13 hooked to an external display. When I shut the lid of the MBP, the external display turns off too, and I'd like the lid shut so the MBP doesn't take too much space on my desk.
How do I keep the external display on while the MBP's lid is shut?
Info:
MacBook Pro, Mac OS X (10.7.4)
ive been tryign to get my mac to continue playing music while the lid is closed and am not having much luck. I have pretty much discovered that it is impossible to do from the OS its self. I have also downloaded insomniax but everytime i enable it my system crashes and i gotta restart. So is anyone aware of a solid program i can use that will do waht im trying to?
View 5 Replies View RelatedI just got a new MacBook Pro for graduation. I've decided to use my iMac as an external display and use my Macbook Pro as my main computer. My iMac has about 1TB of space while my MacBook has about 500 GB. Since I'll be using my iMac primarily as a external display I was thinking about also using it as an external harddrive so I can backup my data from my Macbook via Time Machine.Is this ok to do? Does anyone advised that I don't? I just want to make sure I don't screw up anything before doing so. BTW I also have a WD external harddrive connected to my iMac.
Info:
MacBook Pro (15-inch Late 2011), Mac OS X (10.7.4), Main Computer
I have a 2006 macbook 2 GHz, upgraded to 4 gb ram and 160 HDD. I don't feel like i have enough space so i decided to purchase a new harddrive and decided a 500 GB would do me just fine Though, i have all my data on this harddrive. I was thinking on making a full disk Time Machine copy of my disk and then restoring the new harddisk with that copy. But i don't know where to place that copy, since it is like 130 GB which is quite a big archive.
View 1 Replies View RelatedDo you ever turn off your external hard drive? I got mine (LaCie 1 TB, USB) always connected when I'm at my desk and the HDD is always powered, meaning I don't turn it off at the back (there is the power switch). The HDD goes into sleep mode whenever it's not doing anything, but still, is this bad for my ext. HDD to keep it always powered? Or should I turn it off when not using it?
View 18 Replies View RelatedI have connected an external monitor to my MacbookPro. I wish to close the lid on the notebook but the display goes out (monitor and notebook) and I am unable to find the setting to keep it on.
Info:
MacBook Pro, Mac OS X (10.7.3)
I have a macbook pro and I want to be able to hook it up to my TV and close the laptop lid. Every time I close the lid, the TV goes black no matter what settings I change! I'm not sure if the laptop is going to sleep, or just disconnecting the TV as a display.
I've tried something called Caffeine, but it didn't do a thing.
use my stuidio dispaly and an external keyboard & mouse while my macbook is closed, and if so how do I do that?
Info:
Mac OS X (10.7.1)
How putting my mac to sleep with the display closed?
Info:
MacBook Pro, Mac OS X (10.7.2)
The display on my MacBook Pro turn on even though the lid is closed.
1.Sometimes The apple logo lights up and then turns of on itself when the lid is closed.
2. Various times have i closed the lid of my MacBook Pro and then re open it and the screen is still on and it has not entered the Login screen.
3. If i click the Sleep option on the apple menu it goes to sleep, so i close the lid but it eventually wakes up out of the blue.
Info:
MacBook Pro (15-inch Mid 2012), OS X Mavericks (10.9.4)
I am using Macbook Air OS X Mavericks, connected to HDMI TV via thunderbolt, how do I close my MBA lid and still continue using with the TV display?
View 4 Replies View RelatedI've just bought a Dell 2209WA. I'm struggling a little with colour profiles and monitor setting, not sure which is the best thing to do. I'll be working with some things that need to be printed out and some that are for web only. So I'm guessing I'll need to use different colour profiles depending on what I'm doing, is that right? Can anyone recommend some to me?1. Is it possible to close my macbook pro yet still have it working through my monitor? I have a wireless keyboard so it'd be preferable if I close close the mac and run the monitor from it.
View 3 Replies View RelatedI have a 2009 unibody macbook pro. I have 42 in lcd tv. I have a minidisplay to vga adapter and a vga cable. When I try to connect the monitor to the mbp when the lid is open nothing is detected. I do not get any options to change to mirror mode or am able to change any settings regarding the monitor. I can change the resolution of the built in display only. Now for the twist. If I connect everything, do a restart and close the lid, as the computer boots up the external monitor works. Its the grey boot screen with the apple logo. But as soon as the computer begins to load the desktop, the monitor losses the signal. At first I thought it was going into sleep mode, so I hooked up a usb mouse to keep the computer awake. I tried the process again, and as soon as it goes to the desktop it losses the signal. So I don't think it is sleep mode. I downloaded the minidisplay prot firmware update, but because the screen is not detected when the lid is open I cant run it. When the lid is closed the computer either goes to sleep or doesn't send the desktop signal and I still cant run it. Nothing happens if I change between the video cards (9400 and 9600gm). Is it a resolution issue? Do the vga cables have a max resolution that is lower than 1900 x 1200?
2009 unibody intel macbook pro
running 10.6.8
3.06 ghz 8gb ram
I have a Seagate External HD which I used to backup my windows PC. I just brought a Mac and want to use the same External HD for time machine, but its asking me to reformat it? Is there a way I can keep my files on the HD as well as use it for Time Machine?
View 5 Replies View Relatedcan i want to keep my music on my external hd for my itunes in windows but can i let my mac use the drive to copy music and videos to it and let my windows machine use it too. I think the playlist would would not copy right.This is done by letting windows share the drive that has the music folder in it.
View 4 Replies View Relatedhowever i hear that having your macbook closed is bad for it? i have the white 2.1ghz one (early 2008?) i'd like to close it and stuff to save space or what not.
how can i turn on the macbook without openening it if its safe to keep it closed while running off my external montor?
i have been a 13" macbook user for over a year and love every moment of it.
I work on large spreadsheets daily with the laptop open and another 19" monitor. I am considering adding another monitor and keeping the laptop closed.
Is such setup possible? Have 2 screens on my desk, plugging the laptop to them, keeping it closed and working solely of the 2 external monitors?
does keeping a high brightness level all the time effect performance or display?
Info:
iMac, Mac OS X (10.4.1), 27"/4GB/2.7GHz/intel core i5
I would like to run a Macbook Pro Retina (2014) with the lid closed and all video and audio via HDMI routed to an external monitor (Samsung Syncmaster from 2010). Is this possible? When I try this, no sound is transferred to the external monitor and I cannot operate the Macbook Pro with the lid closed. As soon as I close the lid, it cuts the signal to the external screen. I’ve tried looking for previous posts but they’re about MCP’s connecting via Thunderbolt or DVI.
Info:
MacBook Pro (Retina, 13-inch, Mid 2014), OS X Mavericks (10.9.4), 16Gb, 256Gb SSD
I am currently am using a MacBook Pro mid 2007 and was wondering it is possible to connect it to an external monitor and if so use it when closed without the comp going into sleep mode.
Info:
MacBook Pro
is it possible to have my macbook pro connected up to a large monitor and have the lid closed?
I have tried and as soon as the lid is closed the screen goes off, i have disabled all power saving features to no avail?
When I got my MBP over a year ago during the initial setup, I cloned my MP. As time has elapsed, the two machines are now out of sync i.e. programs, photos, documents etc. how I can copy specific programs, iphoto libraries and documents from one machine to the other?
View 5 Replies View Related