I have connected an external monitor to my MacbookPro. I wish to close the lid on the notebook but the display goes out (monitor and notebook) and I am unable to find the setting to keep it on.
Info:
MacBook Pro, Mac OS X (10.7.3)
I have an 13" MBP that I ordered new in April, 2012. It is running Lion. I have an external monitor that is capable of 1440x900 resolution. I have an external keyboard and trackpad hooked up, and I like to close my MBP up and stick it in a BookArc. I want to be able to have the internal display disabled and to have the MBP only allow me to put windows on the external display, so long as the lid is closed. I also want to be sure that I am taking advantage of the resolutions available on my external monitor, which are higher than those supported by the internal display (specifically 1440x900).
This doesn't seem to work because I either have to allow the MBP to continue to draw my desktop across both screens (internal and external), OR use the "mirror displays" mode, which restricts my resolution of my external monitor. This means I either forgoe the additional resolution benefits of my external monitor, or I end up with windows that fall off-the-cliff, so to speak, because they are drawn in the portion of the desktop that would be shown on my internal display (which is closed).
I've read the community support pages on using the MBP with an external monitor, most relevantly, this page. It simply recommends using the "mirror displays" option. However, this option, as I mentioned above, doesn't allow me to make use of the additional resolution, and my external display looks bad. how to keep the 13" MBP in closed clamshell position, with the internal display disabled, and use my external monitor at resolutions higher than those allowed by the 13" MBP but which are available to my external monitor when not in "mirror displays" mode?
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3), External display (1440x900)
I am wondering that is it essential to connect power adaptor all the time while operating in closed calmshell mode? When I unpluged the cable it didn't work. Is there some way?
Info:
MacBook Pro, iOS 5.1.1
I have a Macbook Air, and i just picked up the new LED ACD from my local apple store. Since im new to mac, is there a way to either close my Air and not have it go to sleep? I want to use the external display as the primary display with my laptop closed, any ideas?
View 4 Replies View RelatedI have a macbook pro and I want to be able to hook it up to my TV and close the laptop lid. Every time I close the lid, the TV goes black no matter what settings I change! I'm not sure if the laptop is going to sleep, or just disconnecting the TV as a display.
I've tried something called Caffeine, but it didn't do a thing.
use my stuidio dispaly and an external keyboard & mouse while my macbook is closed, and if so how do I do that?
Info:
Mac OS X (10.7.1)
The external 19" LCD display does not work with the lid closed. However, it does work in full 1680x1050 when mirroring is turned off and the lid is open. When I turn mirroring on and the lid is open, the external display does not work at full 1680x1050, it shrinks the external view so the resolution is 1680x1050 but only displays 1280x800 worth of pixels.
Summary:
* lid closed, mirroring on, external display does not work (goes into "out of range" mode)
* lid closed, mirroring off, external display does not work (goes into "out of range" mode)
* lid open, mirroring on, external display will not do a full 1680x1050, instead will do 1280x800
* lid open, mirroring off, external display will do a full 1680x1050
A USB keyboard and mouse are attached. This exact setup worked flawlessly with a gen1 macbook pro out of the box.
How do I make the display work with the lid closed?
So I've recently connected my MacBook to an external display (a TV actually). Obviously, when I close the MacBook's screen the computer goes to sleep. How do I stop this from happening? I checked in 'help', it said that if I connected the monitor to the computer after closing the display, the computer would continue to run with the display closed. I've already connected it all though (running cables through cabinets, etc.) and I don't really want to undo all of that! Is there an easier way to set the computer to stay on (as opposed to entering sleep mode) when the display is closed?
View 3 Replies View RelatedHow putting my mac to sleep with the display closed?
Info:
MacBook Pro, Mac OS X (10.7.2)
The display on my MacBook Pro turn on even though the lid is closed.
1.Sometimes The apple logo lights up and then turns of on itself when the lid is closed.
2. Various times have i closed the lid of my MacBook Pro and then re open it and the screen is still on and it has not entered the Login screen.
3. If i click the Sleep option on the apple menu it goes to sleep, so i close the lid but it eventually wakes up out of the blue.
Info:
MacBook Pro (15-inch Mid 2012), OS X Mavericks (10.9.4)
I am using Macbook Air OS X Mavericks, connected to HDMI TV via thunderbolt, how do I close my MBA lid and still continue using with the TV display?
View 4 Replies View RelatedI typed Mac Help about "to operate the portable computer with an external monitor attached and the display closed. When I close the display of my Mac Book or MacBookPro, the external monitor such as my 50" Plasma monitor or video projector would go black. I read the Help and it said and required the USB Mouse and Keyboard to close the Macbook display and put computer sleep. My question is will the Apple blue tooth or wireless keyboard and mice will work with out using the USB? Has any one try that? I am not sure if I should buy wired or wireless to operate this.
View 10 Replies View RelatedI've just bought a Dell 2209WA. I'm struggling a little with colour profiles and monitor setting, not sure which is the best thing to do. I'll be working with some things that need to be printed out and some that are for web only. So I'm guessing I'll need to use different colour profiles depending on what I'm doing, is that right? Can anyone recommend some to me?1. Is it possible to close my macbook pro yet still have it working through my monitor? I have a wireless keyboard so it'd be preferable if I close close the mac and run the monitor from it.
View 3 Replies View RelatedIf you want to use the external display as the main display, and close the macbook pro is it possible that the macbook pro might overheat, or have negative impacts on the machine for keeping it closed while in use?
View 2 Replies View RelatedI have a MBP 13 hooked to an external display. When I shut the lid of the MBP, the external display turns off too, and I'd like the lid shut so the MBP doesn't take too much space on my desk.
How do I keep the external display on while the MBP's lid is shut?
Info:
MacBook Pro, Mac OS X (10.7.4)
I have a 2009 unibody macbook pro. I have 42 in lcd tv. I have a minidisplay to vga adapter and a vga cable. When I try to connect the monitor to the mbp when the lid is open nothing is detected. I do not get any options to change to mirror mode or am able to change any settings regarding the monitor. I can change the resolution of the built in display only. Now for the twist. If I connect everything, do a restart and close the lid, as the computer boots up the external monitor works. Its the grey boot screen with the apple logo. But as soon as the computer begins to load the desktop, the monitor losses the signal. At first I thought it was going into sleep mode, so I hooked up a usb mouse to keep the computer awake. I tried the process again, and as soon as it goes to the desktop it losses the signal. So I don't think it is sleep mode. I downloaded the minidisplay prot firmware update, but because the screen is not detected when the lid is open I cant run it. When the lid is closed the computer either goes to sleep or doesn't send the desktop signal and I still cant run it. Nothing happens if I change between the video cards (9400 and 9600gm). Is it a resolution issue? Do the vga cables have a max resolution that is lower than 1900 x 1200?
2009 unibody intel macbook pro
running 10.6.8
3.06 ghz 8gb ram
is it possible to have my macbook pro connected up to a large monitor and have the lid closed?
I have tried and as soon as the lid is closed the screen goes off, i have disabled all power saving features to no avail?
How do you tell the MacBook Pro to output to the Apple Cinema Display when the lid is closed rather than go to sleep? I know you can use the ACD as a secondary screen OR as the only screen with the MBP lid closed. Is there a setting somewhere for this?
View 5 Replies View RelatedHas any one had any problems using an external display (Apple 24 inch LED is what I am using) with Bootcamp with an Apple laptop (recent MBP) in the closed lid position. I start Bootcamp & Windows, close the lid, but the display/computer won't restart once I plug in the peripherals.
View 2 Replies View RelatedHow do I use my macbook pro lid closed?
Info:
MacBook Pro, iOS 5.0.1
With external monitor attached, Macbook goes into sleep mode when I close the lid, even when its AC attached. Any idea how to disable that so I can run with lid closed on VGA monitor?
View 1 Replies View RelatedI have a late 2008 unibody macbook connected to a brand new Samsung monitor via a displayport to DVI cable and everything works great until I shut my macbook. The external monitor continues to work fine but my wireless seems to lose connection, my desk is approximately 15 feet from a wireless repeater and Airport appears to have a full signal but it will act as if there is a bad connection until I open my macbook back up and then the internet works fine.
I was talking to a friend and he mentioned that some displayport to DVI cables do not have sufficient shielding therefore interfering with the wireless signal but if that was the issue it should be effecting the wireless signal at all times, not just when the macbook is closed.
On every MB I've used since they first came out, you could hook the audio and video up, close the lid, and if it went into sleep mode, the Apple Remote would trigger a "wake up" for mediacenter purposes on a TV/stereo. My SR MB w/ 10.5 doesn't do it. As soon as the lid closes, it's asleep no matter how I toggle the view between screen and external port. Front Row doesn't wake it anymore. Anyone else having this problem? I wanted to find out before calling and asking.
View 15 Replies View RelatedI am using my MacBook with the lid closed, mainly as a desktop. I plan to run Handbrake to rip DVDs. It takes hours and fan is on constantly. Will the heat dissipate better with the lid closed or open? The vent seems to be on the back and I can feel the heat venting out with the lid closed.
View 24 Replies View RelatedCause heat problems? I am using my MBP with the cover closed for space constraints , connected to an external display along with keyboard and the mouse is BT.Over all am I looking at causing damage if I do this for long term.I'm contemplating selling it and downsizing to a Mini.
View 4 Replies View RelatedI just connected my 15" MacBook Pro to an external monitor and purchased a keyboard for my MacBook. I also attach a mouse to my MacBook. When I close the lid completely the MacBook stops displaying on my external monitor. Is there a system preference or something else that I can change to prevent this from happening? I'm hoping to use my MacBook as my desktop too.
View 10 Replies View RelatedI started downloading a trailer on iTunes at my College, then my Calculus professor showed up. So I closed my MBP, and it went into sleep mode. After class, I opened the book back up to notice that the download had finished! Is it possible that it downloaded this while it was asleep? That would be useful during our finals. I could get Portal for steam using the schools internet while taking my tests.
View 3 Replies View RelatedI have the 2011 MacBook pro i7 model. I used My MacBook pro fine saturday morning and closed the lid when i was done like always and put it away, i came back to it later and it won't turn on. I thought maybe the battery died so i connected the charger and that just blinks orange and green. Does anyone have any ideas as to what as happened? Before this happened there was no sign of system failure it was working fine.
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7.3)
Why won't macbook pro stay on when close lid? Something got reset?
View 1 Replies View RelatedMy MacBook Air was closed (which I assume means asleep) and in my bag. Today I suddenly heard a weird hum from the bag and realized that the Airport was incredibly hot and blowing all fans full speed. Of course it was inside a padded bag so there was no air to move around and things got very hot. I have no idea how long it was in there but it could have been days (it was attached to charger cable).
1) is it likely to be damaged? any way to know?
2) any way to figure out why it woke up while closed? is there a log anywhere of that kind of thing? yesterday we had a power outage; could the Airport being cycled off/on somehow woken it up via wifi??
3) how do I prevent it from happening again - how do I shut off any possible options that might lead it to ever wake up while the lid is closed? I heard there's something called Wake on Demand and there is also some mode where people use them (with an external monitor) with the lid closed. I'd like to disable both
