MacBook Pro :: It Goes To Blue Screen When Turned On
Jun 3, 2012My MacBook pro goes to blue screen when turned on and stays there nothing seems to work what should I do?
Info:MacBook Pro (15-inch Late 2008)
My MacBook pro goes to blue screen when turned on and stays there nothing seems to work what should I do?
Info:MacBook Pro (15-inch Late 2008)
When I turned on my MacBook Pro it produced a plain blue screen, followed by a constant beeping noise.
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7)
I'm desperately trying to get my 3 year old macbook to cooperate - it operates fine although it has been very slow lately but occasionally it will freeze and flash a blue screen, then either just remain frozen or shut down. When I try to turn it back on, it responds as normal, but as the desktop, wireless bars, etc start to load, the pinwheel comes up and then the screen flashes blue, and the whole process of loading the desktop starts over. This repeats endlessly until after turning on and off a few times and waiting about ten minutes it will finally turn back on- something is clearly up and I'm afraid I am going to lose data.
View 2 Replies View RelatedI have iMac 27 and screen problem on start up i have blue vertical lines, when it start i have a lot of blue dots and nothing else. when I connect outside monitor its showing the same.
Just installed lion and still the same problem when it starts blue dots, when startup in safe mode loads of blue lines and dots on the screen.
Info:
iMovie (iOS), Mac OS X (10.7.3)
while i am using my macbook the screen will suddenly go blue and flash between different blue colors like it is trying to work. sometimes it comes back on but most of the time it stays like that. I have to force shut down with the button and then restart...about half the time it is still flashing blue after the restart and if it does work, it goes blue eventually.
dont know if its a problem with the screen or what because the computer continues to work...if there is a movie on, you can here it in the background and the screen just flashes.
I just got a new mid 09 macbook pro no matter how I calibrate the screen. the dark/deep blue will always look like purple colour.
View 4 Replies View RelatedI have 7 sites in my iWeb 09 I updated only updated 1 page on 1 site after I published it to mobile me all my pages turned from blue to red.and think they all need publishing again.so I publish I do one site, they turn blue for a minute then go back to red.
View 6 Replies View RelatedI turned on the MBP today (Mid-2007 Santa Rosa) and everything was going fine- until the screen started to jump! Literally the whole display bounces constantly, revealing a white line at the top of the screen (as if trying to center the screen or something). This is on the LCD- haven't tested it on a monitor yet. I just had my logic board replaced about 4 months ago for a faulty 8600GT chip- I'm so hoping it's not that.
View 8 Replies View Relatedmy late 2006 MacBook Pro's screen has turned all pixelated. Not sure if there's a way to fix this or if I should just take it in to the Genius Bar.
View 3 Replies View RelatedWhen I turn my laptop on it sounds like is on, but all I get is black screen.
Info:
MacBook Pro (13-inch Early 2011), iOS 5.1.1, Freeze
I have a problem with my MacBook screen. Everytime I try to turn on the MacBook, the blue screen appears for a second and then everything gets dark (but I can see that the computer turned on normally, it's just the screen that gets almost black, without light). Sometimes only the right side of the screen is blue and then gets dark just like the left one. I was looking for the problem and I perceived that the left side seems to be loose and I can't fix it. What should I do?
View 2 Replies View Relatedgrey screen no apple followed by blue screen with vertical lines. Graphics and logic board replaced <6 months ago. What to do? I held down shift, it gets HOT HOT and makes noises. (for safety mode) followed by a blank grey screen and blue screen. Then tried the other way (I think it's command alt delete? I don't remember) and it turned from grey (no apple symbol) to blue blank. Then third time, grey followed by blue with vertical lines, not blocky clear lines that you can see if you are close to it.Â
Info:
MacBook Pro, OS Lion
When I turn on my laptop, the screen is all fragmented and I can not sign in or control anything.
Info:
MacBook Pro
I've been using my computer like I normally do this morning. I was listening to iTunes on it and noticed it was acting a little slow and glitchy. When I went to get back on my computer I opened it up and nothing showed on the screen, it was all black. However the little white light is shining so I know it's on. I've only had my Mac for a little over a year now and have never had this problem before.
Info:
MacBook Pro (13-inch Mid 2012), OS X Mavericks (10.9.1)
AT start up, after entering my password, there is a flashing grey screen, and I cannot use my laptop.
View 2 Replies View RelatedWhen I turn my macbook pro on I get a green and white lined apple then just a white screen?
View 1 Replies View Relatedi had the macbook Core 2 Duo for About 8 months and it was working great.
yesterday i left a file download in firefox for 5 hours then went back to check on it , it was working FINE, Then i got Back after 2 minutes and the screen is suddenly white and not showing anything i shut down the laptop and restarted , there was a chime and just white screen...i connected the laptop to an external monitor AND EVERYTHING IS WORKING on the external screen but the laptop screen is white!
i had the macbook Core 2 Duo for About 8 months and it was working great.yesterday i left a file download in firefox for 5 hours then went back to check on it , it was working FINE, Then i got Back after 2 minutes and the screen is suddenly white and not showing anything!i shut down the laptop and restarted , there was a chime and just white screen...i connected the laptop to an external monitor AND EVERYTHING IS WORKING on the external screen but the laptop screen is white!!!i tried resetting the PRAM and i tried resetting the SMC twice but nothing Changed
View 1 Replies View RelatedI spilt water on my macbook pro, and wasn't smart enough to let it dry out. When I plug it into charge, no light from the charger comes on. When I turn on the computer, it starts up, the screen is still pitch black.... but if I look close enough I barely can see my startup screen. I am thinking about replacing the logic board? What should I do about this situation. I don't want to spend a ridiculous amount of money at the apple store to have this replace.
View 11 Replies View RelatedFor the new macbook pro users, when going into fullscreen for a youtube video is it normal for the screen to turn greyish momentarily (1-2 seconds) while the graphics card switches? Can anyone check and report?
View 15 Replies View RelatedI previously installed lion os x on my macbook which was a snow leopard. When I then turn it on, it shows the grey screen and stays there forever nothing happens.
Info:
MacBook, Mac OS X (10.7)
My computer fell off my bed onto the carpet and now the screen stays dark but the computer still comes on. Is there anyway to fix the screen? I know the computer is on because I pressed the caps lock key and I can hear it when I turn it on or off.
Info:
MacBook Air
When attempting to turn my Mac Pro on, all I receive is a fast flashing Apple logo. I can't get to my desktop. It appears frozen here.
Info:
iPad 2
Screen sharing cannot be turned off or blocked because it says that the "Remote Management service" is using it. I have no other computers in my home. how can i block it?
Info:
MacBook Pro (13-inch Mid 2012), OS X Mavericks (10.9.5)
I've had a MacBook for about four months, completely standard version, no modifications, no nothing. It's been working perfectly. I've the latest version of Leopard and any other software update that comes with. Today I've been working on setting up a new user account entitled "Work" - for obvious purposes. I've copied my regular account's home folder as well as applications and such to make "Work" as much of a copy of my regular account as possible - let's call that account "Me".
And so I've mostly been browsing around "Work" trying to give it the same access to files as "Me" has - "Me" is an administrator, "Work" is standard - by changing access and privileges. I had some problems getting "Work" to save - when I would log out and then log in again, "Work" would have lost the preferences, e.g. Stacks and Dock settings. I also couldn't change the desktop picture for whatever reason.
So then I was going to log out "Work" to see if it still had the saving problem, and it lagged behind a lot, so I did the emergency-turn-off-by-holding-down-power-button-that-you're-not-supposed-to-do thing. And then when I tried to restart, it wouldn't............
I'm using Macbook Pro Unibody (late 2008). 2.4GHz, 2GB Ram. Mac OS X. So I'm in the library right now and tried to start my computer, and it is just stuck on the blue screen. It worked fine like an hour ago, I don't know what happened. So I hear the chime, and the white screen with apple logo. And then, blue screen and I see that little circle thing going around and around on and off, but nothing. I do hear the fan and hardware. I tried to do PRAM reset, but it doesn't work? I tried to look for other posts with similar symptoms, but couldn't find anything.
View 2 Replies View RelatedA few days ago my macbook froze, when I did a hard reboot it boots to bluescreen. I've even left it up overnight just in case it was talking awhile.
Here is what I've tried so far:
-boot into safemode, holding in shift does nothing.
-Tried to run disk utility, it said something like it couldn't be done (forgot the exact message)
-reinstall the OS from cd, but holding in c causes it to reboot.
-holding option and clicking the cd to boot from causes a reboot also
-command-option-shift-delete does nothing
-Gone into single user mode done the fsck thing, also tried this [URL]
Starting to think the HDD is shot. Just noticed an error when I type in /sbin/fsck -fy it says "Incorrect block count for file pcscd.pub it should be 16 instead of 17. Not sure if that means anything. Was able to run disk utility now, no errors were found however it still will only boot to blue screen.
The mail program froze and I forced quit and reset the pc. Now all it does is reboot on a blue screen and the mail keeps opening up. Im running the os x 10.6.8 software.
Info:MacBookPro, Mac OS X (10.6.8)
why is there a blue line on my screen?
Info:
MacBook Pro, Mac OS X (10.7.3)
My MacBook pro froze so I turned it off.Now when I turn it on it goes to the grey apple screen then stops at a plain blue screen with the mouse up but nothing else.
View 2 Replies View Related