MacBook Pro :: Image Breaks Up Into Different Blocks On Display
Sep 24, 2010
So my screen is giving me issue, not so much the physical screen, but the actual image on my display. I took some screen shots. I assume its something related to the graphics card, but I'd love more info. The screen shots didn't end up working, they came out all black. But basically the image breaks up into a difference blocks, then reorganizes itself. You can see it repeats sections of the Window, but makes it impossible to try to work. Or sometimes part of a Safari Window will stay "on top" of any other Window.
I have a macbook pro (identifier MacBookPro 5,1) which I have been happily using for about 18 months, however recently the screen has been acting up. It will occasionally display lines one pixel wide, but over the whole screen (it's quite difficult to describe so I've attached a photo). This happens seemingly out of the blue, probably once every few hours of normal use, and the only way I've been able to get it to go away is to close the laptop, then open it again - Sometimes it only takes a few goes for this fix to work, sometimes a a lot.
I've tried to hook my macbook pro to 2 different displays, they both showed a very pink image, that gets more and more pink around the contours, I've tried calibration but it didn;t work
I have a 15inch Macbook Pro from Late 2007; well it worked just fine yesterday, but as of this morning the display will not work! It makes the Chime when you power it up, but no screen display; you can adjust the volume buttons and hear that it is on and the volume can be adjusted. The screen brightener and dimmer does nothing, as well as the keys brightener and dimmer. The apple website said to reset the PRAM which I did and then if that didn't work to reset the SMC which I did and got no change in my problem. And now the part that boggles my mind is I have the cables to hook up the MBP to my TV so I figured I'd atleast be able see it on the TV if the display has crapped out but its doesn't transmit the image to there either. Is it possible I caught a virus that kills displaying ability?
A website I need to access blocks the IP address of my Airport Extreme, my macbook pro and imac.... I connect through a DSL modem with a "PC" and can access the website www.ncrealtors.org, but the site blocks the IP address through the Airport Extreme, and even blocks when I connect the macs.
Info: MacBook Pro (15-inch Early 2008), Mac OS X (10.5.8)
Being the IT guy at work, I've inherited a (currently) non-functioning Dual 2.0 GHz PowerMac G5. It' exhibiting some pretty odd symptoms. Let me explain:
First of all, the problems started with the machine coming on (fans audible, Apple chime 'chimes'), but nothing was displayed on the screen. This led me to believe if might be a video card issue, so we ordered a replacement from OWC and no dice. After trying this, I happened to leave the machine on unintentionally for a while, and after about 5 minutes, the fans ramped up to full speed, very loudly. Since we were in a bit of a time crunch (and it was out of warranty) we gave up on it, and purchased our graphics designer a new Mac Pro.
With a bit of googling, I determined that this sound a bit like a dead PRAM battery. So once again, off to OWC I went and purchased a replacement. I get it setup at home last night, and still no dice. If fires up just fine and chimes, but no image on the screen. And here's where it gets weird...
I powered the machine down, and took the cover off to check the PRAM battery again, thinking I may have inadvertently put it in backwards. It looked fine (fits both ways, BTW, so I'm still not 100% sure I have it in right), so I powered the machine backup--but without putting the cover on accidentally. The red light on the mobo came on indicating the cover was off, but I figured I'd wait to see what would happen first. Still nothing on the screen, so I popped the plastic shield in and latched the side cover, and BOOM! Wouldn't you know, it displays an image! I can see a folder icon with the Finder icon on it.
This is 100% reproducible every single time. If I turn it on with the cover ON, I can never get an image to display. However, if I remove the cover and plastic shield, fire it up, then replace the shield and cover, I always get the folder with Finder icon.This is quite perplexing. I should also note that I had my retail Leopard install disc in the drive the whole time, hoping to boot to the DVD if I got an image. It obviously wasn't automatically booting from the DVD, but instead would always display the Finder icon.
Being a post-PowerPC Mac convert, I'm not really sure how to proceed.I'm still not really convinced that there is an underlying hardware issue still, but I suppose it's a possibility.
My 500gb internal drive on my less than a year old mbp has developed 68 bad blocks according to Techtools. Is this drive as good as gone or is worth reformatting? Would apple cover this under warranty?
I have a quick question regarding the image quality when connecting my Mac Mini to my Samsung Monitor 24'' monitor. I am connecting it through a HDMI -> DVI adapter and connecting it through the DVI on my monitor. Although it does display the image, the colour look off, it doesn't look sharp or high definition at all. I checked the resolution and it shows up as 1920 x 1080, which should be very good, but the resolution doesn't look good at all. I am wondering if this is because I am using a 24inch monitor and whether I should try getting a HDMI cord to connect HDMI to HDMI from the Mac Mini to the monitor, or get a HDMI > VGA adapter instead, or maybe buy a better monitor?
I am creating a new image for some old iBooks that will be used in a school. To run a specific program I need to have OS 9.2 installed because it won't work any other way(even through the simulator). I have OS 10.2 installed on the master image iBook computer and have installed OS 9.2 through the restore disks. I can load up to both OS X and OS 9.2 but OS 9.2 does not take up the entire screen. It's contained within a small box in the middle of the screen.
I was recently sent an email that used an HTML stationery wih several photos embedded in it. The email opens normally, but all of the images are icons, displaying file name and size. If I click the icon, the image opens correcly in a separate window. Â
I am running OS X 10.7.3 and Mail 5.2 (1257) and have checked "display remote images in html email" in preferences. A friend with identical software versions receives the same email and the photos are visible in the original email.
I replaced my iMac G4/800 17" hard drive that was failing (S.M.A.R.T. status) tonight. Textbook operation, following directions from xlr8yourmac.com. No problems at all. I pre-built the drive with Tiger 4.10 in an external case (using the iMac as host) and transferred everything to the drive and tested. I booted off the external drive for a few days for testing. Again, no problems.
I got the iMac back together and booted up. Everything sounds fine but the monitor is black. It's as if there's no power to it or perhaps the lamps were just out.
When I press the power key for 1-2 seconds, the mac goes to sleep and the white Sleep Light on the front of the monitor comes on, so the monitor would appear to be getting power.
The Mac is working, evidently, as the chime for new mail sounded and the new drive chirps a little (very quiet though, btw).
I do NOT have a second monitor to hook to the VGA port, unfortunately.
On one reboot there was a sine-wave 'bong' sound, but the Mac proceeded to boot. I shut down again after that, took the housing apart and checked for trouble. Nothing. The video cable and connector is fine. There are no cables pinched or cut that I can see. And I did ever-so-carefully align the two halves when reassembling.
On the third boot I got the normal Mac chime (no bong/gong) and it booted fine - with no video.
One side note that I expect to be un-related: I left the HD jumper in cable-select mode, as the drive that was in there was also set on cable select (was a Western Digital 250GB drive; the new drive is a Maxtor).
I'm using Yahoo Messenger for Mac version 3.0 beta and recently my display images have stopped displaying when logged in or when I open a chat window.
When not logged in and I am selecting a user the display images show, but they go out as soon as I login to any name. When I go to the window to set my browser image, the image field displays blank even after I try reloading the image. I have trashed my Preferences and that doesn't work.
I use MS Word on a Mac. In documents, sometimes a .doc file sent with a logo image above text will display the text, but the logo displays only as a border around an empty box. Yet when I send it to anyone else, the logo I can't see appears in the file for them. In some .doc files, I will be able to see different logo images fine. But about half the time, logo images will only display as an empty box.
I recently updated my MB to OSX Lion 10.7.4. I had to re-apply my custom menu bar and icons (as usual), but the first thing I noticed was that the login window was back to that disgusting linen texture.I thought the update just replaced the file, (didn't happen before), so I went to /System/Library/Frameworks/Appkit.framework/Versions/C/Resources/NsTexturedFull ScreenBackgroundColor.png. And then the file was the same, my previous login window.
So the question is: Where is the new login screen texture stored? I can change the mission control background, but no amount of goolging or anything provides accurate and working information to replace the login screen on 10.7.4. Why would Apple break this all of a sudden? The worse case scenario would be that Apple decided to troll and draw the login screen programmatically. Which should never be the case...
Info: MacBook (13-inch Mid 2010), Mac OS X (10.7.4)
I've been having a problem with my WiFi-connection for at least two weaks, and to me it seems as if it started with the latest OS update I installed. When I turn on my computer the wi-fi connection sets up just as usual, with a strong signal and the networks I frequently use. I can run my browser, e-mail programs and downloads just as I'm used to, everything works fine - and then all of a sudden connection is lost while the wi-fi symbol still shows full signal. When I open the menu to see what networks I can connect with, there are no networks shown by name, the signal-symbol sill having all its stripes filled.
It is neither a router or network problem, because the same happens when I'm on campus and my girlfriend has no similar problem with the connection on her MacBook (nor have I on my iPhone).
Info: MacBook Pro (15-inch Mid 2010), OS X Mavericks (10.9.3)
I just bought a tv to use as a external monitor for my mac however when i boot into windows 7 the resolution (1080p) is fine but its not filling the screen completely, there is 1 inch of black on the top and bottom and about 1.5 inches of black on the left and right sides. it does not do this when i am booted into osx.
i think this could be because of how hdtv's are made and the resolution isn't exact (usually a little bit greater) so windows isn't "stretching" the image to fill the screen. i think osx does it automatically but windows doesn't. if this is the problem how do i get windows to stretch the image? i tried switching the screen mode on my tv's remote but that didn't work.
I am having problems with Preview and Snow Leopard. I can use Quick View to view jpeg files, but when I open them with preview. It does not display the correct image. It just displays a gray block. The only way to resolves this is to delete the preview prefernce files, and then it works. But after a couple of restarts it goes back to not displaying the correct image.
Okay, well I bought this display off of craigslist and when I have a webpage up for 10 seconds or more and minimize the screen, I can see like a faded ghost image of the screen for about a minute or so I guess, maybe a little longer.
Does anyone know how I can resolve this with having to change the LCD screen?
A recently acquired hard drive - a basically new drive - appears to have been causing my mbp to shut down randomly (different drive and the problem goes away). I ran a surface scan on it using tech tool pro 5 and found just one bad sector on the drive.
I zeroed the drive using the binary 0000 pattern option in tech tool (1 pass) and ran the surface scan again and this time the surface scan gets the all clear. Should I be worried about the drive? Is it likely to cause the same shut downs on my mbp? I know the only way to know for sure is to try it, but I tell ya, installing a hard drive on the mbp is time consuming!!
On my macbook pro and Imac, since i installed Lion instead of leopard, my emails account stops working and asking for my password. By filling it in it works again for one day or some days. Repeating action...
Latest Safari 5.1.7 blocks all cookies by default. Is it feature or bug? I can't login to any website that require cookies (for example Google Accounts).
My Quicken software suddenly stopped being able to connect to my bank via the Internet yesterday, giving the error message "Could not establish Internet connection with . . . check your Internet connection" Quicken support said others had been reporting the same problem recently, and it seemed to have something to do with Norton Antivirus. I uninstalled my "Symantec Solutions"/ "Norton Internet Security for Mac" applications (Norton Antivirus, Norton Firewall, Norton Confidential, LiveUpdate, and Symantec Scheduler) and the problem disappeared. I then contacted Symantec/Norton support and learned that they sent out an automatic "LiveUpdate" to their software this week that replaced everyone's working copy of "Norton Firewall" with a defective Version 4.1.0 that blocks connection to the Quicken server (and perhaps other programs?) unless the "Application Blocking" setting is manually turned off. Symantec says a patch to correct the problem will be released through "LiveUpdate" soon.
I recently purchased a SBG900 Motorola cable modem/router to use with my IMAC. For a beginner, I found the setup instructions woefully lacking. I have managed to set up an "unsecure" wireless connection with the 900. It works fine for websurfing. I cannot however send email. When I do, I get a pop up box saying that my email connection to the Apple server on port 25 has timed out. I am able to receive email just fine. I wanted to sort this problem out before attempting to "secure" the network. I'm guessing its somewhere in the Motorola setup but I'm not sure where to start.
I am having fun with my iMac (late 2011 + 10.7.3) aspecially with software bugs.One of them is following:Volume controll keys on my wireless keyboard do not controll sound. Doesn,t matter which one I press I do see the icons on the display but there is no effect on volume level. The sound "speaker icon" on the system bar is inactive and when I press it I see that slider is frozen at the very bottom and can't be moved.Switch your iMac off.Remove batteries from the wireless keyboard.Switch your Mac on.Sound is back, and after placing batteries back in your keyboard you can see also that sound keys are working again. Unfortunatelly you have to make this operation each time when you switching your iMac off.
An external hard drive, 4TB Iomega...connected via eSATA cable...had a power outage and the drive won't be read by OSX now. (Yes, it was on a surge protector and no I did not have a backup. I was actually preparing for the process of creating a backup when the power went out!) Anyway, I have tried using Data Rescue 3 and DiskDrill to try and recover data from the drive. I can recover the first 1/3 of the drive, but it ejects when either app tries to access the bad block. how/what software to use to recover the data? I know there are programs that will avoid the bad block but I've only found them for Windows. Are there any that will do such a thing in Lion? I can not afford a data recovery service. Trying to do this on my own.
Info: Mac Pro, Mac OS X (10.6.8), early 2008, 2 quad-core Intel Xeon
I got an iPod Touch today and I'm while I was testing out some apps I noticed that I cannot connect to my MacBook Pro.
If I try to ping it I get no response. Going to the Mac's address in a browser (web sharing is on) I don't get any response either. I cannot connect to for file sharing either. I have turned off the firewall in OS X and rebooted the computer with no change. All sharing options are enabled. If I run "sudo ipfw list" I get this: "65535 allow ip from any to any".
It appears however that Snow Leopard allows connection from outside the local network, as Internet, BitTorrent, Mail etc. works as usual.
I've tried turning the firewall off in the router but connections are still blocked.
Upgrading to 10.6.3 seems to have affected Web sharing. I cannot seem to connect to http://localhost anymore, I was wondering if it has done the same for anybody else?
The background for my desktop and most windows look normal. My icons, some dropdown menus, video and all games big or small have clear alternating blocks in the graphics. I have reinstalled Mac OSX 10.4 (didn't work). Then I upgraded to 10.4.8 (didn't work). Downloaded drivers for my ATi Radeon 9600(didn't work). I bought IMac G5 in 2005 mid june and serial numbers dont fall in the series for free repair. [URL] and picture number 2, [URl].
