A website I need to access blocks the IP address of my Airport Extreme, my macbook pro and imac.... I connect through a DSL modem with a "PC" and can access the website www.ncrealtors.org, but the site blocks the IP address through the Airport Extreme, and even blocks when I connect the macs.
Info:
MacBook Pro (15-inch Early 2008), Mac OS X (10.5.8)
I'm trying to block a website on my Airport extreme. How do I do that?
View 2 Replies View RelatedJust bought a new Airport Time Capsule 3TB for backup purposes and to use as the main router in my home (model number A1470 the latest tall one). I was originally using an AirPort Extreme (model number 1408 approx 6" square and 1' tall) for my main router. Â
I got the TC setup and putting out good wifi signal, but would like to take my Extreme and extend it off the TC to boost signal in other parts of my house, but having some difficulty. I searched the forums and found setup instructions to do this, but I get a message saying, "unexpected error. Try again." Well, tried again and still no luck.Â
Info:
Airport Extreme
Simple question: Of the new features in the new AirPort Extreme Base Station, which of these could become available to the old AirPort Extreme Base Station via a software/firmware update? I have to think that at least some of the new features don't actually require new hardware. Just trying to figure out if I want to shell out $179 for a new AEBS when my current AEBS works pretty well as it is.
View 21 Replies View RelatedI just got a time capsule and replaced my extreme with it then added my 2 expresses to the network. Was getting 28-33mbps download speeds using speedtest.net to test now i'm getting only 4-6mbps. WTH!!! Also the transfer rate for backing up my macbook to the tc drive is ridiculous!!!
View 2 Replies View RelatedI have an Airport Extreme, with two USB hard drives connected to it. The Airport Extreme shares these disks to my wireless network via Airport Disks.
Upstairs I have an Airport Express, that wirelessly connects to my Airport Extreme downstairs, and extends the wireless network so I get a good wireless reception upstairs.
My problem is, that it does not seem like me Airport Express does a good job of forwarding my 2 USB Airport Disks to the extended wireless network upstairs.
For example, when I use the AirVideo iPhone app to stream video from my USB Airport Disks I get a server connection error when I go upstairs and the iPad/iPhone switches to the Airport Express networks. I cannot reconnect as long as it is on the Airport Express network. If I turn the airport Express off, and thus switch to the poor wireless reception from the Airport Extreme, I can connect to the USB Airport disks again.
The Airport Express is connected to the Airport Extreme in bridged mode.
I have previously time machine backups for two macbook pros on same drive. However, I connect the drive to the airport extreme and although I see the drives and the backups, I can not access the files over Airport Extreme.
Info:MAC Book Pro, Mac OS X (10.6.4)
Just a question for those who have used the Airports. Can a USB hub be used to expand the number of devices the Airport can use? i.e., an external hd, a laserjet, and an inkjet.
View 4 Replies View RelatedThis might seem an odd question but I had to replace my last Airport Extreme base station as it was faulty....I've now got the newer "Dual Band Extreme Base Station". I want to avoid any conflicts with my old settings for my wireless network with my MBP. Should I uninstall the last version of Airport Utility?Is there anything else anyone would recommend before i install or connect the new hardware/software?
View 2 Replies View RelatedCan it? If it can, would Airtunes still work like normal.
In other words, can I be connected to my Airport EXTREME and Airtunes would still work since the Airport EXTREME and EXPRESS are using the same network wifi-name (the Express is just extending the Extreme's range).
The latest upgrade of AIrport Utility doesn't support my Airport extreme, but the old version 5.6.1 says it doesn't work in Lion. How was I managing my Airport before th 6 update? What do I do now? Will I have to get a new Airport?
I have DSL service. I have an iPod Touch and an iPad 1 that I'm trying to connect. I just upgraded both iDevices to iOS5. I've been having trouble keeping an internet connection live for them, but now I can't even get the wi-fi to connect.
Info:
AirPort Extreme, Mac OS X (10.7.4)
I just purchased an Airport Extreme 802.11a/b/g/n to use as my home wifi router. I have two Airport Expresses 802.11b/g. I want to use one for Airtunes to my stereo and another for wireless printing.
View 1 Replies View RelatedI currently have the apple extreme as my wireless router. It works great. I absolutely love it. I have two macbook pro's (wife and I both have one) and use it for my PS3 and Xbox 360. I started a new job and was given a free HP desktop (not my choice, but hey, it's free, so what can I say). The desktop is not wireless and I am not able to put my computer near the airport extreme because my TV already owns that territory. Today I bought the Airport express to use as a bridge (and other things in the future). I have plugged it in. I opened the airport utility using my macbook. It finds my extreme and my express. I select that I want to set up the express. I select that I want to set it up using an existing wireless network. I select my airport extreme. It tells me that it has to restart the express. I wait approximately 3 minutes. It then tells me that the settings to the express have been changed but it's not able to find it.
My main goal is to use the express as a bridge. I have the express plugged in beside the desktop and want to run an ethernet cable from the express to the desktop to allow for wireless capability.
I have a Macbook (white unibody) running Snow Leopard. I have a personal wireless network using an Airport Extreme and I have an external hard drive (WD) connected to the Airport Extreme. I use this hard drive for my Time Machine Back ups.
I just got back from a trip and tried to back up my time machine. I got the error that the back up disk is not available. I then tried to open the airport utilities.
It tells me that "Airport Utilities is unable to find any Airport Wireless devices". I find this doubly strange because I have no problem connecting to the internet on this wireless network which supposedly does not exist.
I bought the new airport extreme to extend the wifi range in my household and hoped to share a hdd. Upon my experience and reading the forums, the sharing hdd is not as easy as I thought. But that is not my issue at the moment.
My issue is with extending the network. A couple weeks of ago, I did the setup to connect the two airport extremes together (older round AE & new box AE) using aiport utility. It seemed to have work because the signal was stronger in a part of the house that usually had 0 to 1 bar.
But shortly after, the signal showed itself as inconsistent. The signal strenght is jumpy from 0 to full bars. And right now, I am sitting in a part of the house that used to have 0 bars and now, I get full bars. And yet my mbp cannot see the newer, closer in distance AE.
I am upgrading from a g wireless router to an n. I have a Belkin right now that I hate. Neither I, on a mac, nor my roommate, on a PC, can get a consistent connection on it. Needless to say it's going back and I want to get an express or an extreme. I had actually bought an Airport Extreme first and it was lightening fast, but I was told that the Express was just as fast, so I went to exchange. The guy at BestBuy told me the Belkin was cheaper and just as fast, so I bought it. I would really like this to be my last trip to the store for a router. Do I need to shell out for the Extreme or is the Express just as fast if all you need is an n router?
View 4 Replies View RelatedI've currently got a Macbook and a Macbook Air connecting to an Airport Extreme Basestation with the new firmware. Both the Macbooks have 802.11n and the new Airport Utility installed. My Macbook is functioning perfectly, however, my Macbook Air has the following problems:
1) It won't connect to the AE when it is set in the 802.11n only mode at 5 GHz. It will scan for the network but not find it. It will connect in the 802.11 only mode at 2.4 GHz.
2) It prints very slowly to my HP printer connect to the AE via the USB port. It will spool the page being printed and will take about 1-2 minutes before the printer finally print it. My Macbook doesn't have any problems printing. When connected directly to the printer, the Macbook Air prints fine making me think that this is a networking issue.
I believe the printing problems started after the upgrade, but since I use my Macbook more than my Macbook Air, I could be wrong about this.
I seeing if I can do that easily? I have a new MBP 15 coming next week and I'm looking to replace my old Linksys AP-G to an N speed
View 6 Replies View RelatedI cant get on my network as it keeps saying password failed etc. 3 iphones and 2 ATV's and the ipad are connecting with no problems at all.
I was able to link to my neighbors wifi that has no password though And. it's a 1 month old MacBook Pro 13" and a pre 09' White Macbook
AND the iMac in the bedroom is working on my wifi fine as well.
Can you plug it into the AirPort Extreme and not have to plug it into the MPA every you need to?
View 6 Replies View RelatedHow do I use my AirPort Extreme base station with my FIOS Router to extend my network? I have hard disks connected to my AirPort Extreme and would like to access them.
Info:
MacBook, Mac OS X (10.7.4)
Does anyone out there is able to guide me thru the step on setting up a 2Wire all-in-one router with the AirPort Extreme base station? I was reading from somewhere, they were saying like i need to bridge the 2 router together or something.
View 2 Replies View RelatedI just bought my first Mac from ebay i'm a new user and don't know much about macs, I was using my ethernet to surf the web until my belking router comes in. So this is what I have done so far my desktop is wired to the router running XP the connection is fine and my setup is a WPA, my macbook is running 10.5.6 Lepord my router says the MB is connected to the router but I'm unable to connect to the internet. TCP/IP is set to DHCP my airport says status on, and that it has a self-assigned IP address and may not be able to connect to the internet I've already have my MB set to share web, internet, files & printers on my network. Is there something i missed or i'm doing wrong I called belking and got no problems with the router we used many setup changes and I ran a hardware test on my MB and no problems were found.
View 9 Replies View RelatedI just purchased my first Mac: 13" macbookpro. I got a time capsule with it as well, but cannot set up my macbook to connect to the internet. I connected my desktop pc with windows XP via ethernet just fine. But I cannot get the wireless network to popup on my airport extreme.
View 7 Replies View RelatedI just bought a new mbp and my old 17" MacBook pro 2006 2007 models screen was not really working so I decided to take the screen off and use it as a kitchen computer with an external monitor. The problem is that my airport extreme is in a room right next to the kitchen and the old mbp is not picking up any wifi signals not even the neighbors wifi but, my new mbp can pick up the signals where is the wifi antenna located?
View 3 Replies View RelatedI need to know how I can set up a system so that I can use the printer and browse the internet wirelessly on the MacBook Pro and have the non-wireless PC connect to the internet and use the printer as well.
It sounds confusing, so hopefully one of you guys will be able to understand it and maybe quickly draw a labeled diagram to show me.
I am unable to add aan HP Laserjet 1212nf printer connected to an Airport Base station. When I click add it takes me directly to the I.P. window. My MacBook pro running 10.6 does not see the printer, Bonjour does not search for it.
Info:
MacBook Pro, Mac OS X (10.6.8)
I'm encountering an issue with a new Macbook Air and would grateful for any insights. I have an Airport Extreme (latest model, 5th gen, A1408) based network (all updates applied). I have a new 2012 MacBook Air (11") that I noticed was suffering from VERY slow wifi speeds. After looking into it, I realized that if I used the configuration utility to separately name the 5GHz network and connect to wifi on the 2.4 Ghz network, the speed radically improved.Â
To illustrate, using speedtest.net, I saw download speeds of 35-38 Mb/s using the 2.4 Ghz network. This drops to 2-3 Mb/s when using the 5 Ghz network. The Macbook Air is showing an RSSI value of -56 when connected via 5 GHz and -51 when connected via 2.4 Ghz.Â
Other deivces in the home have normal connection speeds on the 5 GHz network, as does a previous generation, 2011 MacBook Air.A friend's also new, 2012Â 11" MacBook Air exhibits the same symptoms, so the issue is not specific to my unit.Â
Info:
MacBook Air, Mac OS X (10.7.4)
There wasn't one installed when I bought my Macbook Pro so I had to buy one seperately and I'm just wondering how to install it?
View 5 Replies View RelatedCan anyone explain to me Airport Extreme and Airport Express and their functions?
View 8 Replies View Related