So the other day I booted up into OS X and was going to make a short video in Photo Booth with my friend. I recorded a video, but when I tried to play it back there was no sound. I tried recording another video, this time yelling at the top of my lungs. This time when I played it back, I could hear my yelling very faintly. I decided to open up the System Preferences to see if the microphone was picking up any sound. The input level showed that there was a little bit of static, but the bar barely moved when I yelled. I opened up Skype and called "echo123" to see if Skype was picking up and sound. After the call recorded my sound, it played it back and to my surprise it sounded perfect.
It was like my microphone didn't have a single problem. I then opened up Photo Booth again and the System Preferences to see if it would pick up and sound from my microphone. And once again it would only barely pick up sound when I was yelling. After a few minutes, I finally decided I'd take my MacBook to the Apple Store. But before that, I decided I'd just try a little trick that worked on my iPod earbuds when one of them wasn't working correctly. I flicked my finger against the plastic right next to where the microphone is above the screen. I opened up System Preferences and to my amazement my microphone was now working perfectly!
So, I'm on skype and everyone can hear all the background noise which is very annoying. I'm using the Mac book pro internal mic. Anyway to block the background noise?? and also, my headset has two plugins which is a sound/mic plug in and I noticed the mac doesn't have anywhere to plug in a mic just one for volume...
When accessing the website; 'WhatUsersDo', which is used for testing websites, you are required to provide an audio recording of your thoughts about the website which you are testing, However, I am unable to submit an application to become one of the testers, as it is saying that I need to enable a microphone before I can continue with my application (as you are required to take a practice test during the application). Â
I have looked through other forums, and my microphone is working fine.
I'm on the latest MBP and when I'm in bootcamp on Ventrillo, I sound like darth vader when I talk. I think the problem lays in the internal microphone (and the driver that doesn't seem to work)? So if I get an external one and plug it in, I'd rather not want to go buy an external mic and just have it not work still.
so i bought an imic since i heard it was suppose to work.i plug in my microphone jac into the IN, switch the imic thing to mic, and my microphone still doesn't work.
I just bought a new MacBook pro 1 week old. I partioned my hard drive and installed a clean copy of Windows Vista Ultimate on one side. I then downloaded skype, but my internal microphone will not work. I tried everything. Can someone help me out with this issue.
I want to know if anyone can point out the advantages and disadvantages of using a line-in microphone (for the 1/8" analog jack) compared to a USB microphone for a Mac Pro. Do I need some kind of amplification for a head-set microphone with a 1/8 analog jack? I can't get mine to work, but I wonder if there's something I haven't selected correctly in my Preferences.
I opened up Photo Booth to record a video for YouTube today and realized that I had recorded my self for 7 minutes for almost no reason.
Photo Booth doesn't seem to be detecting my microphone at all, because when I play the clip i recorded, there is no sound. My speakers are on, trust me.
Also, other audio recording applications, such as Screenflow and Audacity are able to pick up the microphone easily.
I've ran the application with nothing else running and get the same result.
I recently purchased a new SSD and would like to input that into my MBP 2012. If I have a partition on my external HDD that contains the carbon copy of my MBP, am I able to clone it into my SSD after I have installed it in the MBP through the USB?Â
Internal HDD --> External HDD Place internal HDD into optibay, and place SSD into the harddisk slot Connect External HDD via USB to MBP CarbonCopy to new SSD via USB from External HDD Format Internal HDDÂ
I have a stereo microphone with a jack of ~6 mm and I bought a converter to 3.5mm but.. it does not seem to fit into the socket, I dont want to push harder to break anything there. Even if it fitted I still dont know if it would need additional software. Does anyone know how to connect it?
When running windows 7 x64 my microphone does not work. I have tried on both Skype and AIM. I can hear my friends but they cannot hear me. When I log into OSX it works fine.
I play a lot of video games on the internet but my connection is not great around 512kbs. I am trying to reduce the sample rate of the microphone from 44k to 22k to use less bandwith when I talk to other players. I always break up when I talk. There is no option to do that in the sound settings. Is there a way to do it? I have a macbook pro 15' 2.5 ghz intel 2 core duo. With 3gb of Ram.
I have an unibody aluminium MacBook. (The 13 inch model - before Apple changed the specs and re-released it as a "MacBook Pro").
I've been trying to narrate a voiceover in iMovie today, and the sound quality from the internal microphone is terrible! Muffled and ringing machine noise in the background. I've tried changing settings. I've tried running it off the battery instead of the power supply - in case it was related in interference from the power supply. I've tried different software. GarageBand and Audacity. Oh - and the fan wasn't running when I tried to record stuff.
The thing is - I remember the internal Microphone working much better before. I've made a couple of things for YouTube, and I didn't have a problem then.
Is it plausible that the Microphone has gone wrong now? Is this a known issue with the aluminium MacBook (Pro)?
- If an external Microphone would solve things - is there anything I should know about what kind to buy? I don't want to invest in anything expensive - I don't use it enough. I know that Apple's sound-out jack is designed for specialised headphones. (Although normal headphones sometimes work if you wiggle them a bit). Is there anything unusual about the sound input jack?
I have a 17" Macbook Pro from Jan 2012 and I can't get an external microphone to work. Initially I tried a cheap Sony microphone with no luck. So purchased logitech headphones. They have 2 jacks, one headphones, one microphone. I've tried it with Word for Mac and Quicktime (selecting line-in)
I am just looking for a little help with my Early 08 white Macbook. It is running 10.6 just in case you were wondering. But the problem I am having is that I can not get a microphone to work on the damn thing. I have tried 2 different microphones on it, both in through the line in and I have tried line out too and neither of them worked. When I go into system preferences and hit sounds and go to line-in it says it dosn't pick anything up.
So the internal microphone on my 2.2 GHz Intel Core 2 Duo MacBook Pro just decided to stop working a few months ago. In the sound tab of system preferences I get nothing. Although when Skyping with it, the person I'm talking to says they can hear some kind of noise when I tap the left speaker (where I assume the mic is at.) I didn't use it all that much but it was pretty handy for when I needed to record a spontaneous song with my guitar. It had rather good quality.
I have a Pyle preamp microphone setup that I would like to run through my Macbook Pro 17. It has a USB port on the front of the preamp, can i just plug that in to the Macbook and change the mic settings? Everyone talks about recording but I want to be able to send the karaoke and mic sound through one port on my amplifier at home.
Yesterday I bought the steel series 7H gaming headset (no USB external soundcard included) to game in hardcore pro Korean mode on my mac once in a while, but when I try to connect it to windows 7 (under bootcamp), I get no input from the microphone! The headphones do work, but the mic doesn't. I have a 2010 15" i5 macbook pro. I have reinstalled all the cirrus and realtek drivers, and nothing. The mic connects via line-in. headset webpage: [URL]
i have this headset (without USB connector): [URL]and a adapter that allowes unifies the two 3,5mm connectors (3 pin) to a single 4 pin connector.under mac os x everything works fine: headset and microphone work excellent.but other situation under windows: only headphones work, external microphones don't.
I have a Bose speaker system connected to my Audio Out port of my mid-'10 Macbook Pro but I can no longer control the volume: System Preferences has the sound controls set to the maximum but the sound output is weak and the microphone icon at the top of the display is grayed out (but shows it at maximum when I click on it). Apparently, then, the sound is only coming out of the laptop. How do I get it to go out of the audio out port through my Bose Companion 2 and be adjustable?
My MBA gives out squeaking sound around bass beats. Doesn't happen all the time, but when it does happen, it irritates me. When I listen to the same song on the iphone, I get a very clear sound. Can anyone do this for me? Can you listen to "Speak to me/Breathe" by Pink Floyd on your headphones / earphones if you have that track? Along with the first few heartbeats, I hear squeaking noises. Do you hear anything like that?
This squeaking noise could also happen sometimes when I am minimizing / maximizing windows, or doing something processor intensive.
I am trying to get a Sony ECM-DS70P Condenser Stereo Microphone with a 3.5mm stereo male plug to work on my MacBook Pro with a Behringer UCA222 USB Audio Interface and I am having no joy at all.The Microphone will not work when plugged directly into the Line-in jack on the MacBook Pro because the Audio Line-In input on the MacBook is line level -10dB to+4dB and microphones are generally around -40dB. So, I need either a line level preamp or a usb audio interface.I decided on a USB Audio Interface (Behringer UCA222).The Microphone is plugged into a 3.5mm stereo to RCA L & R cable which is plugged into the L/R RCA inputs on the Behringer UCA222. The Behringer UCA222's USB Cable is plugged into a USB port on the MacBook Pro.
On the Macbook Pro in System Preferences > Sound > the output is set to Internal Speakers and the input is set to the USB Codec (Which showed up when the Behringer UCA222 was plugged in). [code]
The speaker on the top of my screen is muted and I cannot get any sound out of the internal speakers. When I try to raise or lower the volume there is a circle with a line through it underneadth the speaker level window that pops up and everything seems frozen. I've checked online to find a solution and did see a red light in the headphone jack. So I plugged back in headphones and a USB and pulled out the headphones, the red light went off but I still see no option for internal speakers in my Sound preferences. What do I do? I'm trying to avoid a trip to the apple store...
I have a hard time with skype conversation and rosetta stone speech recognition. Since I started using Rosetta Stone 3.4.5, People i'm talking with on skype complains that they don't hear me well, everything was fine untill I installed this software. The microphone doesn't emit as much volume as it should be and I believe rosetta stone is responsible for the differences in output volume.Â
I tested the microphone in garage band and I don't hear my voice normaly unless I start shouting out loud.Â
Or maybe the built-in microphone is too old and it's not working as good as it was before ?Â
My macbook is running on MAC OSX 10.6.8 Processor: 2.26 GHz Intel Core 2 duo Memory: 4 go 1067 MHz DDR 3Â
Info: MacBook, Mac OS X (10.6.8), Skype, Rosetta Stone
