I have a problem with finding the right software for my MacBook Pro. I've contacted Hp customer care for the software needed but they sent me the v l0.6 link, and the update was not successful because my MacBook version was not supported "As I thought". And somehow I can't find the printer software online.
Info:
MacBook Pro
I am using an HPdeskjetF4580 and it will not print my document. It is connected using the USB cord. Why won't it print?
Info:
MacBook Air
I currently have the Lion OS X working on my MacBook Pro and a HP Deskjet F4180 and I can't print in color. What changes do I need to make to enable this feature
Info:
MacBookPro, Mac OS X (10.7.3), Printer worked fine on Snow Leopard
I have a HP Deskjet 722C printer, and I'm trying to get it set up with my macbook. Unfortunately, the only driver I can find on the HP site is for windows. Is there anyway to make it work?
View 2 Replies View RelatedDoes the Mac Mini support the HP Deskjet 1220C printer via USB? I've connected the printer but it doesn't seem to recognise it. Tried adding Printer but the Mac Mini does 'see' the printer.
Info:
Mac mini, Mac OS X (10.7.4)m
I have QOOK hub and hp deskjet d1660. I want to use my printer in wireless network via QOOK hub. I connected usb cable between the printer and hub. How can I set it up?Â
Info:
MacBook Pro (13-inch, Mid 2012), Mac OS X (10.7.4)
I have an HP DeskJet 6540 printer and I replaced the ink cartridges. After I replaced the cartridges, I aligned them and then did a test print. I noticed that the blank ink didn't print. I opened system preferences, and then I opened the printer utility. It says, "Device Status : Pen Failure." Current Supplies Levels says, "The current levels for the selected printer are shown below...Cartridge on the left (tri-color 97) is unknown and the the cartridge on the right (black 96) is missing." Oh, I forgot to mention that the print cartridge light on the left side is flashing. I went to the HP support website and it says that the problem could be an incorrect print cartridge, incompatible print cartridge, or problem with the (left/right) print cartridge. The solution they offered was to remove, inspect and reseat the problem cartidge. It also said to clean the problem cartridge contacts. I did that and it still gives me the same results. I even reset the printer but still got the same results...Â
So the next thing I try is the OTHER cartridges listed as compatible with my printer which is 94 (black) and 95 (tri-color). I bought the new cartridges, placed them in the printer and I still got the same message from the print utility. I took the latter cartridges back and got a refund and explained that none of the compatible cartridges are working with my printer. I kept the 96 and 97 cartridges in the printer and the light on the left continues to flash so now I'm here asking if anyone knows how I can get my printer to recognize the new ink cartridges I installed?Â
Why can't I print from my Mac book Pro to my HP Deskjet 3054A. I am currently able to print wirelessly from my old PC desk top but not the laptop
View 3 Replies View RelatedI have a hp deskjet f4280 and when I am trying to scan from my MacBook Pro Mid 2010 (MacBookPro7,1) the scanner and image capture app froze... I was observing the issue carefully and I think it is due a problem with the "HPscanner.app" When it is working on the preview it freezes and state at 99.8% of use of the processor.... Â The problem is only in this computer. I have another mac, MacBookPro8,2 and it scans properly and without any problem.
View 4 Replies View RelatedI was having problems printing from my Canon LBP6000. Print jobs remained held in the queue. I uninstalled and reinstalled the Mac CAPT Ve r340 driver from Canon's website, no improvement. The printer works fine with my Windows laptop. I found an option to remove all printers from the Print preferences section. I can't remember how I did this, but all printers were removed. I reinstalled the above driver, but now in the 'print & scan' - 'add printer' section, I have no printer options. And no idea how to get printer options.
Info:
Mac mini, Mac OS X (10.7.3)
I have an iMac 27" (intel 3.4 GHz, Intel core i7, and 16 GB memroy) purchased a few months ago. It is running the latest version of Lion 10.7.4 I run this computer on our network along with a iMac 24" 3.5years old and a Macbook Pro 2.5year old.Â
This computer seems to have a beef with the Hewlett-Packard printer (HP colour laser jet CM1312nfi MFP) which I have had for about 3 years. I can not get the new computer to work with the printer properly. It allows printing but it pauses all the time when you resume the print it starts printing from the begining of the document againIt will pause any prints sent to it across the network after the first 1 or 2 pages are printedIt won't allow scanning at allWhen you launch the scanner it takes forever to connect (3 - 4 mins)If you try to scan using any of the scan options (if it loads the devise) it then states it can not connect to the device, or all the scan buttons apear but greyed out.This is odd as it will still allow printing??Â
Also, all the other PC's have the same version of Lion 10.7.4 and have the latest HP Driver installed (these were released on the 14 Dec 2011). Other useful infoThe scanner is hard wired to the 27" machineYou can only use the printer if one scanner is hard wired as it does not have wirless capacity.I have uninstalled and installed the software more times than i can count trying all different trouble shooting etcI can only conclued that there is somthing the 27" machine is doing to prevent the scnanner registering properlyNone of the other computers can use the scanner correctly either. As you can only scan a page at a time using the "Scan" button. If I wish to scan multiple pages on with either of the other computers I need to use the "scan to folder" button.Â
the device is not even recognized by my MacBook Pro!!!
i don't know what to do anymore, i have installed the updated software and i never even see the device pop up. it's weird cuz it works well on my pc, and it's recognized on my sister's acer laptop but can't install.
the only solution i cld see is that the usb cable is a bit rusty?
have HP DeskJet 500 with 25 pin and Power Mac G5 with USB ports - will an adapter allow me to connect the two?
View 2 Replies View RelatedI have a deskjet 3845 and I can't seem to get the computer to recognize it.
I have installed the drivers from the hp website but when I run "printer setup" it doesn't find anything. Any suggestions?
I have an ibook G4,10.3.9
I have the HP 460cb mobile printer and a MBP.
It's simple, I want to print wirelessly via bluetooth, no USB dongles!
I have the HP Bluetooth card inserted into the printer so there's no problem with that. Everything was setup smoothly but for some reason, the two won't connect.
The devices were recognized and setup, then I went to pair them and they wouldn't connect. Suddenly they did connect for about 30 seconds (I could see the Bluetooth sign with the three dots in the middle, indicating that a device was paired; and yes I made sure all other Bluetooth devices were disconnected to avoid any confusion)
Before upgrading from 10.5.8 to 10.6.1, the printer could work. After upgrading, the printer kept pausing when I send print jobs. I am unable to resume the printer and keeps toggling back to pause.
View 6 Replies View RelatedInitially, I had my WinXP computer share the printer with my Mac; it was connected to the PC, and through the wireless network, I would print off of my Mac. It used the hpijs driver. Everything worked fine. After the PC died, I decided that, until I get a new printer, I would use direct USB connection when I would need to print. However, after trying to add the printer from the Print and Fax tab, the printer spits out garbage.
I tried the Gutenprint 5.2.5 driver for HP DeskJet 810C, and after having absolutely no luck with that, I went to check what driver I used to use when my printer was being shared, as it was printing properly back then.
The result with the hpijs driver? Same garbage! It works fine when I use my Boot Camp, so it must be a driver problem with Mac OS X. I then tried the Generic PCL Laser Printer and the Generic PostScript Printer, but with the same results.
What's going on? Why is nothing working on my Mac? It seems to works on the Windows computers in the house. I'm using the same cable. Any ideas as to what is causing this? Maybe it's a bug with the recent update...?
In case it's of any use, I have Mac OS X 10.6.3 with a 2.8 GHz processor and 4GB of RAM.
I have an HP Deskjet 5650 and though I am using genuine HP cartridges, I keep getting error messages that the cartridges are not compatible. I cannot seem to find the files to delete and do a clean install.
View 14 Replies View RelatedAfter installing snow leopard on my 2.8 GHz 8-core Mac Pro, I cannot do duplex printing. I have also installed the 10.6.1 update. I presume snow leopard thinks my printer driver is up to date, since I have not received the HP printer driver update to install. I have even downloaded the HP Printer Drivers for Mac OS X v10.6 update from the Apple Support downloads site, but I get the following "error message" prior to the installation completion:
System extension cannot be used
The system extension "/System/Library/Extensions/hpPlugInInit.kext" was installed improperly and cannot be used. Please try reinstalling it or contact the product's vendor for an update.
There was a mention elsewhere of a check box in "print & fax" in system preferences to enable duplex printing. Unfortunately, I cannot find this check box.
I have a MacBook Pro and am trying to connect to my network PC Printer. I have followed all available instructions and they printer appears shared. It appears on my Mac and I can send jobs to print and it says it is printing but nothing comes out.
Info:
MacBook Pro
I have connected my Macbook pro to the printer and all looks connected, except when I print error message reads not connected?
View 2 Replies View RelatedPrinter software for canon MP830 is unavailable from Apple. I downloaded the driver from canon and installed it. It shows on the desktop, but I cannot add the printer. It keeps wanting to find the software at apple. How do I configure this to work?
Info:
MacBook (13-inch Aluminum Late 2008), Mac OS X (10.7.3), Canon MP830 printer
how do i delete a printer and the drivers from my mac book
Info:MacBookPro, Mac OS X (10.7.3)
My Macbook can't locate my HP printer on my network consistently.
Info:
macbook, Mac OS X (10.6.2)
I am unable to access a shared printer on my macbook air. the printer is attached to my iMac
Info:
MacBook Air (13-INCH, MID 2011), Mac OS X (10.7.4)
I have an HP printer and I can't use the scan option because it doesn't show up on my computer. ANd when I try it from the printer it gives me an error window.
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7.3)
It worked a month ago. But now, since the update, I can't get my MacBook and printer to hook up and play nice. They're both on the same network, and both say they're connected okay, but the Mac can't find the printer wirelessly. Works fine via USB. I've rebooted the router, rebooted the Mac, rebooted the printer, and even completely uninstalled and then reinstalled the HP printer software, along with that update from the Apple support site. Its like there's a wall blocking their communication. Weird.
Info:
Mac OS X (10.7.3), iPod Touch 3rd gen 32gb, iPad 32gb
Lion and now my HP Laserjet 1200 printer won't work? I've downloaded the appropriate driver from the Apple site and it's not on HP's list of printers that won't work with Lion?
Info:
MacBook, Mac OS X (10.7.3)
What is the best small printer to go with an air book and thunderbolt screen and be a great printer?
Info:
MacBook Air, iOS 5.0.1
How can I add a Epson Stylus SX445w to my Mac Book Pro...This is the second one I've tried and failing miserably..I've installed poken to the help line at Epson and they say it's down to Apple.
Info:
MacBookpro
