Whenever I connect any one of three Lacie drives they instantly affect the speed of my 15inch MacBook Pro, especially when using Final Cut Pro. None of the drives are close to full & I'm connecting them with a FW 800, but other links working well too.
View 1 RepliesTopic. Title says all. SSD affect speed of rendering / exporting in FC or IMovie
View 3 Replies View RelatedWhen moving the mouse about, if you are moving it slowly, the mouse pointer hardly moves atall, is there a way to disable this variable tracking speed affect?
View 5 Replies View RelatedJust upgraded to a 27" quad-core iMac yesterday and I noticed the startup time is much slower than it should be once I migrated all of my files from my old 24" iMac over. I usually keep my system up for months at a time, so startup time isn't an issue, but the question is: Does a slow startup time indicate that once I'm up and running, the system could be much quicker, too, or is that slow issue solely restricted to just the startup time?
View 1 Replies View RelatedI purchased a 16GB PNY Attache and cloned my hard drive before I installed anything on it. My only reason is for backup and to run a few utilities. It seems to be a little leisurely when I boot from it though. Does anybody know if there are faster read and write ones or is this as good as it gets?
View 4 Replies View Relatedit's becoming slower than it used to be (see umbrella more often). I don't know why but I can't check about this mac either. I repaired the disk using Start up Disk and Disk Utility but nothing has improved. Does it have to do with the disk space being used? I have 72GB of free space.
View 2 Replies View RelatedAlthough they work fine on other computers, my external hard drive and USB key won't show up on my macbook. I know it gives power to them since my external lights up when it's plugged in, and I see that they're connected in the System Profiler, but they don't appear on the desktop. Also, my ipod shows up in iTunes, but the computer always says it's corrupted, although it works fine. I thought that was an iPod/iTunes thing but since finding out about my hard drives.
View 4 Replies View RelatedI have a few external drives for my Macbook Pro. One of the drives is an Iomega MaxMini with USB ports on the back to add drives.
My question is; when I hook up the drives to my laptop I get about 4 drive icons on the desktop for each of the partitions, and when I need to remove them I have to eject them or move them to the trash icon.
Is there a way I can put the drives in a folder of some kind that I can just eject and make the desktop look less cluttered?
I have tried a Samsung Drive and an ASUS slim drive (that worked twice, then stopped working). They do show up in the Disk Utility, but not on the desktop. Disc Utility states that burning is not supported, even though I was able to burn two discs with the ASUS before it stopped as well. I had my keyboard replaced around the same time as the issue starting, it is possible that they could they have messed with something by accident. The tech did also forget to put a screw in above the DVD Drive. I also will note the internal drive is a Combo Drive, not a superdrive.
Info:
MacBook (13-inch Late 2006), Mac OS X (10.6.8)
how do I open external drives
Info:
Mac Pro, Mac OS X (10.7.3)
What is the best external hard drive with 1TB for the new Macbooks? I heard a rumor the new Macbooks don't have firewire... is that true?
View 5 Replies View RelatedI have an external hard drive that I have been using for my Pcs, and when I hook it up to my mac I cannot write to it (although I can read from it). Is it possible to write to this external hard drive?
View 5 Replies View RelatedI recently got a 2008 Macbook air with 10.5.6 installed. It was a floor model.also, the date when i booted it up was before 2001 for some strange reason.anyway, i have a WD 320 gb passport, usb ind. power external. It worked just fine two days ago, but now i upgraded through "Software Update" and..-It does not mount in finder, sidebar, or disc utility.
-the power light turns on
-cannot force mount with 3rd party software (Mount Me! 2.05)
-the MBA will also not mount any SD cards!! I have tried two different cables and even my printer!!-iPod Touch works just fine in the same port-SD cards and WD Passport work fine in anything else
Managing a MBP with SSD and external drives for data?
Its come to the point of upgrading my 2007 MBP 2.4 to a new i7 that I'm thinking of ordering it with a SSD drive. Its the biggest 'hit' to increase performance it seems. Problem is the size of the SSD drives for cost. I can justify the 256GB model but not $1300 for 500GB which would be ideal, and even if I wait 6 months or so to get a 500GB I don't see the price coming down all that much. So...
Let say I order an APPLE SSD in my MBP and use it for a boot drive and some files. How do I configure/set-up the external drive to read its files for Aperture, iTunes, documents.... Thinking now is that I would use a WD 2TB external drive in RAID so I have the files on one 1TB and auto back-up on the other 1TB in one inclosure, and another 1TB drive for Time Machine.
This kind of limits my portability, so I'm also thinking I'd also have a portable larger HD to take with me when I need it. How do I sync the files I'm working on and adding to on one external drive with the other (as easy as possible)?
I may be thinking this all wrong, so any suggestions besides just the 'how to?'
I've had a LaCie Porsche Design for the last 6 years with no problems but with the upgrade to a MBP I'm looking to get a new portable hard drive (LaCie or another brand). My old LaCie was FW400 so I'd be looking at FW800 now. Which make and model do you use and are you happy with it's performance?
View 24 Replies View RelatedI just got a brand new Mac Book Pro. I wanted to get an external harddrive for it. I have a gift card to HP and wanted to buy one from them? Does anyone know if they are compatable? If not, anyone have any suggestions for a HD that is good, but not terribly expensive? I want one that is at least 250 GB.
View 2 Replies View RelatedSo I just installed a larger hard drive in my macbook pro. As OSX was installing I decided to read reviews online (bought it in the store when I got the MBP). They're all really bad about using the drive in a MBP - [URL]. I'm installing the application software now and the hd is spining a lot and vibrating the case and making a lot more noise. I've read a few Seagate reviews and they're not much better for that size.
I want to install a huge hard drive because this is going to be my main computer for at least 8 months while I'm working away from home. Normally I have a desktop w/ a huge hard drive so I don't care what's on my laptop. Anyway, based on these reviews and how the drive has been feeling in the case, I think I might re-evaluate putting a larger drive in, and instead go with an external. I can fit all my photos and music on a 250, but I couldn't fit everything I store on my desktop on a 250.
So my first question is, is there a good, reliable 500gb or larger 5400rpm replacement hard drive for the mbp, that a lot of people like? And then the main question: I have a lot of large video files on my Windows box that are over 4gb, which is the FAT32 limit. When I transferred them from my old computer I had to rar them to smaller files and then un-rar them. This is quite annoying. If I'm gonna have an external drive, I'd like one that can be used on both windows and mac and support 4gb+ files..................
I have four external drives connected to my MBP: One USB 2.0 drive, and three that are connected via FireWire 800 (they are connected "in line", i.e. one is connected to the MBP, the second one is connected to the first one, and the third one is connected to the second one).For several months already, I experience the following anomaly:When an external drive hasn't been used for a while it normally goes into sleep mode and the otherwise turning disks come to a standstill. The problem, however, starts when I want to use the data of one of the "sleeping" drives (e.g. by opening the Finder): Then one or more other drives, that are also in sleep mode, but used to come back into "active" mode in the past, are suddenly disconnected. MAC OS X then displays the message that a disk has been disconnected without being formally ejected (via the dustbin). This is not normal, of course, and I am afraid that this behaviour could harm the disks health and live time.I have tried the Disk Utility Tool of OS X for all the drives mentioned, but they seem to be ok.
Info:
MacBook Pro (15-inch 2.4/2.2 GHz), Mac OS X (10.6.8)
I have a brand new 13" MBA which I'm working on building an image to use for deployment using Carbon Copy Cloner 3.4.5. For whatever reason, I can't boot the new 2012 MBA from an external LaCie FW800 or Thunderbolt 1TB Little Big Disk that is running either 10.7.2 or 10.7.4. As soon as I select the drive to boot from when holding the Options key or from selecting the partition from Startup Disk in System Preferences, I get the do not enter icon(circle with the diagonal slash). I tried both plugged in through a Cinema Display and plugging the Thunderbolt drive directly to the laptop. I confirmed both LaCie drives boot properly on an iMac and the last gen MBP/MBA.Â
Laptop Specs:
13"
1.8GHz Dual-core i5
8GB
128 SSD
[Code]...
I have two external hard drives attached to my MacBook Pro (running Lion) using a powered USB hub. What is the best procedure to use when shutting down the computer at the end of the night, and when turning it on the next morning. I didn't turn the computer off much when I used Snow Leopard so I can't really say that it has something to do with Lion, but I'm using Lion now and I am shutting down every night. Every morning when I turn the computer on the external hard drives don't load. I have to disconnect all the wires from the hub then first reconnect the hub to the computer, next the power to the hub, then the hard drives one at a time as they load. I would like to turn the computer on and have the external hard drives load automatically.
Info:
MacBook
I am new to Macbook and cannot remember if I need to safety remove external devices.
Info:
MacBook Pro with Retina display
Could I use an external Bluray drive with the new MBA as long as it is compatible with OSX?I know the MBA's have the capability of using an optical drive on another computer. Is it possible to create an audio CD from the MBA's library and write it to a disc on another computer?
View 1 Replies View RelatedI recently purchased two Lacie Rugged hard drives, a 500GB for client use (meaning, it is given to clients to review raw footage and then given back to me where I then make edits.) The 500GB is calibrated at 50% Mac usage and 50% other and it has been worked out fine thus far. The other hard drrive is a 2TB Rugged XL Hard Drive has not been used due to the pop up I get when clicking the LaCie Setup Assistant which reads "You can't open the application LaCie Setup Assisstant because PowerPC applications are no longer supported."
1.) What does "You can't open the application LaCie Setup Assisstant because PowerPC applications are no longer supported." mean?
2.) How do I fix it?
3.) Will fixing it effect my 500GB drive?
Info:
LaCie Rugged External Hard Drives, Mac OS X (10.7.3)
I'm a relatively new Mac user (Macbook Pro 15). Can anyone tell me hwo to delete files from an external drive WITHOUT having to empty the entire trash bin. I can easily send the files to trash, however this does not free up disk space until I empty the trash. Personally I don't like to empty all the time as it ceases to become an effective safety net.
Info:MacBookPro, Mac OS X (10.7.4)
Since it has built in graphics, will running a 23" ACD slow the rest of the computer? I'm thinking about Photoshop and Flash here. My work computer is a 15" MBP at 2.0 Ghz and I think a drop to 1.6 Ghz wouldn't be so bad if I could use a separate monitor and not see anymore of a performance drop.
View 16 Replies View RelatedThis ended up being pretty long but I tried to include as many details as possible. If any more information is needed please just let me know in this thread. I have been trying to figure this out all day and it has been driving me nuts. First of all I have a Macbook with a 2.4GHz Intel Core 2 Duo processor, 4 GB of RAM and am running Mac OS X Version 10.5.6. Also this is the last generation of the "white" macbook that came out in February I believe of last year.
My external HD is a 1TB Rock Mobile Disk. For some reason when I try to transfer files to or from the external HD to my Mac I am getting nowhere near the expected 480MB/s. I do use a Swiss Gear 4-port USB splitter. When I use the splitter I am getting a transfer rate of about 120MB/s and without it I am only getting about 300MB/s. This is of course if I am only trying to transfer one 800MB movie. If I attempt to transfer multiple seasons of television shows it will drop to as low as 40-50MB/s. Also, if I were to be transferring a single season of a TV show. The transfer speed is much faster to click and drag every episode from my HD to my Mac than it is to transfer the entire folder at once. The whole folder might take 25 minutes but one at a time it will only take about 5.
I see a lot of info about problems with various external drives working with Time Machine. I have Lion 10.7.3 and find that my old external drive that worked with PCs doesn't work. So, does Apples have a list of recommended esternal drives or at least a list of ones Apple knows are compatible?
Info:
iCal, Mac OS X (10.7.3)
got a real basic question to ask and you're gonna think im an idiot for asking...I just bought a 320gb western digital elements hard drive and want to reformat it so that its compatible for both mac and pc's. i intend to format it as NTFS-3G as it would allow me to use it on the 2 platforms without having the 4GB file size restriction that fat32 has, anyway.....
when I go to reformat my external hard drive in disk utility, I see my external hard drive to the left, and there's a "sub" hard drive as a child of the external hd listed uppermost. just wandering which one of the two do i select before going to Erase>Windows NT filesystem (NTFS-3G)>erase? Do I select the uppermost drive and erase that or the lower one? or both
I recently picked up a couple of external drives, and decided to benchmark them to determine whether the interface and/or drive type made much of a difference. For those that don't want to read the details, here's the bottom line: If you're going to splurge on a FW800 interface, it's well worth fitting this with a 7200 rpm drive to maximize performance. Uncached sequential writes over FW800 were twice as fast on the 7200 rpm drive compared to the 5400 rpm. FW800 is a marked improvement over USB 2.0 as well. Full results are below. For background, when shopping for drives, I was interested in using the FW800 interface on the MBPs, for the simple reason it's rated almost twice as fast as USB 2.0. Some of the drives I was shopping for included 7200 rpm drives. My first thought was this was silly, since the interface limited the throughput to far-below the limits a 5400 rpm drive could produce, so why bother upgrading to 7200 rpm? Well, it turns out it does make a difference. I've got both a FW800 enclosure (G Drive Mini) and a USB 2.0 interface (Nexstar TX) as well as a 320GB 7200 rpm drive (Hitachi) and a 640GB 5400 rpm drive (Western Digital). So, I benchmarked both drives using both interfaces. Some interesting results! Turns out, the 7200 rpm drive does in fact dramatically improve performance in the FW800 interface. For sequential operations, Firewire has a dramatic improvement over USB 2.0; for random read/writes, drive speed seems to be a more important factor. And for large files, the combination of Firewire and 7200 rpm gives a pretty impressive throughput of almost 75MB/s. Full results are below. Note that the drive and interface are noted in the title bar for each drive.
View 18 Replies View RelatedI have a macbook air, I'm trying to use my airport extreme with a 1 tb hard drive plugged in over my network to store my iTunes etc i change the preferences but it always seems to forget it when the laptop is turned of..
Info:
MacBook Air, Mac OS X (10.7.3), using 3rd gen airport extreme
