why I have to check & repair disk permissions every time I have to restart my MacBook Pro. When I do the check I get various messages eg 'Library should be '0', is '80'. And other variations for Library.
Info:
MacBook Pro, Mac OS X (10.7.2)
Disk Utility says there are a bunch of disk permissions that need repairing. I hit repair and disk utility says that it repaired those disk permissions. But when I verify, it says they still need to be repaired.
Info:
Mini 2.4Ghz, Mac OS X (10.6.8)
I'm seeing this show up when I do a permissions repair in Snow Leopard 10.6.2
Permissions differ on "usr/share/derby", should be drwxr-xr-x, they are lrwxr-xr-x
Repaired "usr/share/derby"
It shows up each time I do this. Anyone else seeing this?
I am having problems with my Mac running slow. I had a friend guide me to run a "repair disk permission".I did that but I am not sure if I am to click clear history.Also should I do anything else to help my Mac run better?
Info:
iMac, Mac OS X (10.6.8)
When I open Disk Utility and select one of the 2 volumes in the left pane, the buttons "Verify disk permissions" and "Repair disk permissions" remain greyed out. Only the "Repair disk" and "Verify disk" buttons are enabled. This is not the startup Volume. For this volume all 4 buttons are enabled.
How can I repair the disk permissions on the volume?
I have Mac OS X 10.6.4
Using the Apple Disk Utility...
What the difference between running Repair/Verify (Permissions or the Disk itself) on the hard drive or the boot volume listed in the window?
Some say just run it on the boot volume, others say run it on both.
Is there an advantage in doing both (if so, why) or should it be just the boot volume?
Information:
Power Mac G5 / 2GHz
Mac OS X (10.4.11)
Recently I archived and installed leopard from tiger. Since then sometime there is a message that comes up telling me I need to restart my computer in all different languages. Also when I try to verify and repair my disk permissions, this is what shows up:
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", ....
I bought this G5 with consistant startup problems but after replacing the hard drive,installing a fresh operating system, re-seating the ram, checking the Pram battery, etc, it was running fine. I now realize that when trying to repair the disk permissions, the same list keeps coming back even though it shows it's been repaired. Also, occasionally it may freeze or go into kernal panic on startup. If the hard drive is new, does it sound like a possible hardware problem? Does repairing disk permissions involve anything hardware?
Powermac G5 2 GHz
500G HD
4.5 G memory
I repaired my disk premmisons on my mac, but in the history it says, Warning:Suid File "System/Library/core....as been modified and will not be repaired
View 3 Replies View RelatedI'm having a series of problems. First some intermittent audio problems with Garageband, then, then some external drives won't mount, and now I can't sync to my disk from the iMac. I've run Disk Utitilies a few times and when I do Verify Disk Permissions, it finds a list of things to fix, I then hit Repair Disk Permissions and it fixes them, and then hit Verify Disk, and it say the disk appears ok. When I do Verify Disk Permissions again though, it finds another long list of things to fix. Is this serious? What should my next step be? Should I reinstall the entire system?
View 2 Replies View RelatedI just got a new Imac last week. When I try to go into Command + R the repair mode it looks like it changed to a reinstallation mode which is what I don't want. Is there another way to run disk permissions or disk repair in Mavericks?
Info:
iMac (21.5-inch, Late 2013), OS X Mavericks (10.9.3)
Every-time I repair permissions using the disk utility it says that the permissions are repaired, but then I click to verify permissions and it is all as it was before... What can I do?
Info:
MacBook Pro (13-inch Mid 2010), Mac OS X (10.7.3)
I have my pbook g4 in target disk mode and I am trying to make a superduper backup but I get "Error starting permissions repair for disk1s3 Powerbook-G4-#1: Operation not supported for the Mac OS X version on the targeted disk (-9950)".
Disk utility doesn't have repair permissions enabled. So, I 've only done a repair disk on the target disk which a journaled hfs+.
While trying to pepair permissions systom freeze up. So I put in the startup disk hit restrat holding down c and tried to repair permissions that way and it froze up that way too. I had to manually turn off machine.
Info:iMac, Mac OS X (10.6.8)
How often should one need to repair permissions? It seems that I need to do so too frequently in order to repair sluggish or erratic performance. Â
Info:
Mac Pro, Mac OS X (10.7.2)
I ran a disk check on my MacBook Pro which told me to run disk repair. Since this was my boot HD, I took out my Installation DVD, put it into the running system and started the installation file then selected that I wanted to reboot and start utilities. The system then rebooted, the "chime" came, and then, silence, gray screen with apple logo, nothing is happening. What do I need to do, to get further and repair my hard disk?
Info:
MacBook Pro (15-inch Mid 2010), Mac OS X (10.6.8)
When exactly do you need to reset the SMC, PRAM or repair permissions?Â
Info:
iMac, Mac OS X (10.7.3), iMac Late 2009
I repaired permissions earlier and I keep getting these that won't be repaired. Is it anything to worry about? Any idea what the issue is?
View 2 Replies View RelatedI carried out a "Repair Disk Permission" from the OS X Install disc by mistake. I meant to do "Repair Disk" from the OS X install disc. According to [URL] (and the guide posted here) "Repair Disk Permission" should not be done from the OS X install disc, as it may alter changes made by by software updates. Is there any way I can undo my mistake?
View 2 Replies View RelatedI have a 2TB Western Digital My Book Studio FW800 external that has 5 partitions, connected to my 2011 iMac. I had help doing the partitions and don't really remember the reasoning, but one is just for my SuperDuper! backup, one is Miscellaneous, one for movie clips off my camcorder, one for misc scanned photo's and one for my genealogy research. I back up using Time Machine to a Time Capsule and also to this WD hard drive with SuperDuper!Â
Recently I'm getting a pop up message that "Mac OS X can't repair the disk "Genealogy"'. And it needs to be reformatted. It's become a read only disk. When I look in Disk Utility it shows all the partitions as "Mac OS Extended (Journaled)" EXCEPT for the one in question. I also noticed that there are a lot of files with "date created" being the same date in 1969! These files may be letters I've written or photo's I added to that partition within the last few years.Â
I think I have to completely reformat the entire external hard drive to repair this, but I want to make sure. Because it's going to be a major hassle backing it all up to another external (having to get one first) and then figuring out how to make the files that have turned "read only" in that one partition, back to their original state!  Does this sound right, that I have to reformat the entire external hard drive? And how do I get the read-only files back to their original state.
Info:
iMac, Mac OS X (10.7.3)
Using OS X 10.5.6
When running Repair Permissions in Disk Utility, it reports that there are errors and that it's fixed them but if I run it again, the same errors keep appearing.
I've noticed that the current permissions on the errors are lrw-rw-rw- which I assume means that they are symbolic links and not the actual files which Disk Utility is expecting. Any idea what's going on?
I have run the Disk Utility verify function against my system partition. It tells me there are minor issues that need fixing up and I should run the repair disk function, by booting using Command-R and using the Disk Utility to repair the drive.Problem is, when I boot using Command-R and select Disk Utility the partition is shown greyed out and the Verify and Repair options do not work.I think this could be because the partition is encrypted. The utility does not offer me the chance to unlock the partition with my passphrase.How can I repair the filesystem errors on this partition?
View 2 Replies View RelatedFortunately I got a time machine backup. And its restoring the drive while in Lion recovery mode. Here's what happened... I dont have a router a my place at the moment and so my two phones (iphone 4 and htc android) connect to my internet using my MBP's wifi via internet sharig. For some reason they were not able to get an IP from the mbp. After doing some wifi swtich toggles and forgettig & rejoining the network, i decided to reboot all my devices. I shut down my modem, phones and restarted my mbp. On reboot, after the chime, it showed an unsusal 'progress bar' under the apple logo. The bar progressed to about 10% and then the mbp just powered off. This happened several times even after PRAM and SMC reset. Â
So now i booted with cmd+r pressed and in recovery mode ran a 'verify disk'. It said the verification stopped and that i should repair the disk. When i tried to do that it said the disk cannot be repaird and that i should back up as many files as possible and attempt to format the disk and restore it with time machine. It is precisely what im doing at the moment. Â
1. Mbp wont sleep even when internet sharing is off
2. Mbp wont lit the onboard display upon opening it in clamshell mode until i removed the 3.5mm audio cable of my speakers from the audio out port!Â
Info:
MacBook Pro, Mac OS X (10.7.3), Mid 2010
I just tried to use my MacBook pro but its showing a loading bar and it loads for like 5% and then shuts down.I read the instruction booklet and it says that I should tried to repair the disk or reinstall Lion but when I tried to repair it stops the process and when I try to reinstall its telling me that the disk is Locked...
Info:
MacBook Pro, Mac OS X (10.7.2)
I put an external USB drive into my Macbook Pro, to transfer some files from it to a PC. I wanted to delete a file from a folder that I've just copied, but the file would just pop right back on.I've tried to erase the whole drive, Disk Utility couldn't. Tried to use sudo chmod 755 on the volume, it said that I only have read only previliges.
Info:MacBook Pro (13-inch Early 2011), Mac OS X (10.7.2), Driver : USB Transcend JF V30/8G
What are all these errors, i did a repair permission before software update to 10.5.6, than i restarted and did a repair permission after software update and now for the first time i got all those SUID errors.
View 2 Replies View RelatedYesterday i checked my hard-drive for permissions and it found ALOT it had to repair, so i repaired them and all went fine. Then i restart check again LOADS more!!, if i repair and even wait 5mins loads more come back instantly why this could be?
Also could this be a reason for why when i now start my MBA it seems to hang on the grey screen before showing the apple logo and starting to log me in?
I've owned this iMac for less then 20 hours Â
Mac OSX 10.7.3
21.5"
2.5 GHz Intel Core i5Â Â Â Â
4 GB 1333 MHz DDR3 ram
"Mid 2011"Â
It was purchased brand new. I used it for one hour yesterday, run the set up, install updates. thats all I have done with it. Today I awake to it presenting a loading bar of some sort under the Apple logo and Spinning wheel. I researched the bar, and found that it was a progress bar for a disk check, and since it doesnt complete (I let it do its thing) something must be wrong, However when i run disk utility, it can find now error in the disk. but my sound and video play pack does not work unless i restart the machine. this seems like an unessecary process. what are the possible causes?
Info:
iMac, Mac OS X (10.7.3)
I have a new MacBook Air running Lion. Every time I use my backup software, it changes the permissions on my external drives, and I have to change them from read only to read & write, so I've gotten in that habit. At one point, I noticed that the permissions on my internal *startup disc* were read only, so I (foolishly, I now know) changed the permissions on the startup disc to read & write, with apply to all enclosed items checked. As I continued working, I got messages that a number of extensions could not be used and will be disabled (or something like that). I decided to reboot, so the computer could reset and hopefully correct things.
When I tried to boot, it hung up on the grey screen with the Apple logo and the spinning clock/gear. I let it spin for a while, then forced power down and tried to boot in safe mode. The progress bar appeared as it's supposed to, but when the progress bar finished, it went back to the grey screen and hung up again. I let it spin for over 40 minutes before powering down, just in case it was doing diagnostics or something. I don't have access to the original OS DVD (nor do I have an optical drive to put it in). Any way for getting the computer to boot, at least in safe mode?
I accidentally changed the disk permissions on my Macintosh HD to "none" for everyone, except system and admin, who both still have read/write/exec privileges. Now, my Mac won't boot up. What can I do to fix this from single user mode or verbose mode?
Info:
iMac, Mac OS X (10.7.1)
